I have an old cordless phone (at least I guess it is ) it's a 2.4 ghz. I just noticed when I make a call I lose wireless internet connection. has this happened 2 any1 else? ( i have made many calls and long ones at times but I just noticed it happened today and verizon said I have to get a 5.8 ghz phone.
View 6 RepliesI recently bought a new desktop. Os is the vista home premium edition. The internet often lose its connection. My msn keeps on re-connecting again and again. when i checked the status of the connection, everything is perfectly fine, the signal strength is excellent. I have no problems with my previous xp desktop. Everything is excellent, well, until it crash.
View 8 Replies View RelatedI have VIRGIN wireless broadband with a Huwai e220 modem. It is connected to my Windows Vista Ultimate desktop PC via USB. I also have a small network comprising 1 x Linux Mandriva PC, 1 x Linux Mint PC, and an old desktop without g/card, monitor, mouse or k/board that I use to store files. My problem is that whenever I connect to the internet I lose my network. When I try to change the settings in the "network and sharing centre" i can get my network but no internet! I hav etried every possible combination of settings that i can do without being able to have both. The strange ting is that sometimes when I connect it all works for about 3 minutes then it falls over!
View 6 Replies View RelatedI wonder if anyone can help me regarding this problem. Incidentally I have read and tried the suggestions on the sticky on sleep mode problems but I feel this does not match my problem.
I have the computer booted and then I can connect to the internet OK when I leave the computer and put it into sleep mode this works OK, however when I return and wake it up I cannot get an Internet or email connection and the only way is to restart the system. Can anybody give me any ideas?
I've searched here for this problem, and it seems that others have had it as well. I just got a new PC and it's running Vista. Each time I put it into sleep mode, when I come back, I have no wireless internet. I can either reboot or unplug the wireless receiver, either work, but it's a pain. Repair/diagnose does NOT work. For what it's worth, I had another PC, less than a year old, and it does the exact same thing. I just assumed that the old one was just wierd and my solution was to not put it into sleep. We do have a hard wired one, it does NOT lose connection when in sleep mode. My internet comes back just fine upon unplugging the receiver / replugging it. I have tried the solution I found..by unchecking the 'allow the system to put this device to sleep'..that did not work. the PC's are pretty DISSIMILAR in what they have on them for hardware, which leads me to believe it's a Vista thing. They don't even have the same spyware stuff..
View 7 Replies View RelatedI have a issue with my Linksys wireless USB adapter. I am trying to use it with Vista Home Premium. After installing software... I plug the adapter in (like directions say) and windows update goes to work. It updates the driver, installs correctly, I then connect to my home network and all is good. My prob is for some reason I lose internet and the USB adapter itself. One time I switched users and lost all. I have tried uninstalling adapter and tried reinstalling by pointing to my D drive (install CD) in hopes of using the driver that's on the installation CD. as soon as it saw everything.. windows update once again gave me the same buggy driver. I have tried to install with UAC disabled... no luck... the Linksys website/support for drivers has the same updated driver. I tried to use an older one but Windows keeps forcing this updated one down my
throat.
I have been on the phone collectively for 6 hours with AT&T as well as had a technician out here to look at this problem. I have a new wireless router box. The whole At&T system went down briefly (tvs and all). When it booted back up my computer wouldn't recognize the wireless network. After getting a new box, it will now recognize the wireless network in my home. It says I am connected to the network with excellent strength but I still cannot get online. My desktop works fine and I plugged the ethernet cable into my computer and it still won't get online being hardwired to the router. My firewalls are turned off. I have run an ipconfig with the following message:...................
View 9 Replies View RelatedI am using Vista and wireless E180 USB Modem connection from 3. For a long time i has been working fine, but now i cant connect to the internet. I gives me the message - command line option syntax error type command/?
View 4 Replies View Related32 bit Windows Vista Home and I have McAfee security. This as my sons laptop and he could not get the OS to start up. I done a system restore have since been able to log in. From that point I have tried to connect to the internet with a netgear wireless router WGR614 v6. I can establish a wireless connection, but I am unable to connect to IE. When trying to do so, I get internet explorer cannont display web page.
When I try diagnose connections I get the host may be down and windows found a problem that cannot be repaired automatically. I am running a pc with xp home through the netgear router with an ethernet cable so I know the internet connection is good. I have tried to connect in safe mode. I have done an ipconfig reset and a dns flush. I disabled my windows firewall and still have no luck.
I have a Dell Inspiron 6000 laptop. I am having the same issues as the people with the 3945's. What happens is that I can access local network but not internet.
View 7 Replies View RelatedI'm really frustrated with this. I have no idea whats going on. I'll be browsing and my internet will start to slowly die and then cease. and then it becomes like a car without gas. You can let that engine just turn and turn and turn but it's never going to fire. Internet Browses fine > Internet starts to run slow > Internet Stops completely > Icon on task bar still has internet globe on it > repair and diagnose resets network adapter > globe goes away and shows that the network has local access only > stays like that for hours
1. Cant access router
2. Cant access internet browser sites
3. Cant connect through 3rd party applications....
My computer is running Windows Vista Home Premium 32 bit, service pack 1. I have a DLink wireless router, model WBR-1310, hardware version B1, firmware version 2.02. The issue I have is my internet connection will randomly go away (the globe will disappear and my network will go local only). This can be while I'm in the middle of doing something online, or sometimes when I get back to the computer from being away for a few hours the connection is gone. I'll have to randomly disconnect/reconnect the connection to the router to reestablish my internet. I've disabled all sleep modes/screen savers/etc. I just want to keep this connection live 24/7. I would like to know if there is any way to fix this so that my connection becomes more stable.
View 4 Replies View Relatedi have a new laptop and i can't access internet using wireless connection. the first is a desktop with windowsxp, new one has windows vista. my router is simens. i wanted to know what is credentials and what should i write in the domain name.
View 4 Replies View RelatedI've just purchased a new PC, running Vista Home Premium, with a built- in PCI Wireless adapter, but am unable to connect to the internet. I have emailed my supplier's technical support, but I don't think the problem is straightforward, nor do I know whether it is a hardware of software issue, so I thought I'd try elsewhere in the meantime.
The symptons are as follows:
I have an old Netgear DG824M wireless router/ADSL modem. I have a laptop running Vista Home Premium. This was able to connect to the router and hence to the internet straight away with virtually no configuration - just entered the WEP key and it all worked. This has recently been upgraded to SP1, and still works okay. I have my old desktop running XP. This has no connection problems. The new PC has an Asus WL-138GE (or 138G V2 - not sure which) PCI adapter. Initially, it was identified as a Broadcom adapter. The new PC had problems right from the start connecting to the router and the internet. Most of the time, it appears to be unable to get a DHCP address. The signal strength is always excellent, and it correctly identifies the router as a Netgear DG824M. When it does manage to connect to the internet, the connection only seems to last a few seconds, or is extremely slow. I cannot connect to the router at all using the new PC. It comes up with the username and password very quickly, accepts that, but then seems to hang loading the home page. I usually give up after about 5 or 10 minutes. When connected, I can ping the router and I can also ping websites, even though I don't seem to be able to connect to them using IE. I have no antivirus running, and the only firewall software is windows firewall
I have tried the following:
Checking DHCP client service running, Disable WEP, Disable Windows Firewall, I upgraded the wireless driver by downloading one from Asus. It now recognises the adapter as an Asus 802.11g Network Adapter (driver c:windowssystem32driversBCMWL664.SyS, Broadcom 4.102.15.56), but this doesn't seem to have made any difference. I deleted the adapter and let it recreate itself. It loaded up the same drivers. I've removed IPv6 ,I've set up the PC with a static IP address (192.168.0.51), set up the router as the gateway, and my ISP's DNS servers as the DNS servers. I added an =93ArpRetryCount=94 DWORD key to the registry as recommended somewhere. I made some further registry changes as recommended by Microsoft KB 928233. I reset TCP/IP and Winsock using netsh as administrator. I tried "netsh interface tcp set global rss=3Ddisabled autotuninglevel=3Ddisabled" None of these changes seem to have made any difference, and I've run out of things to try!
My Home network setup consists of the following....
In one room. 1 x laptop running XP Home, connected to the internet via
a linksys wireless router, and modem.
In another room, I have this laptop, Acer Aspire, running Vista
Business, and has wireless.
When I connected up my router (given to me by a family member, no
software, just router, and mains adapter), and switched on my Acer
laptop in the other room, I was able to connect to my Linksys Router,
and gain access to the internet without any security whatsoever, no wep
key or anything.
Now i know most people with problems have issues with not being able to
connect to the internet because of a wep key lost or alike.
My issue is, i would like to add security to my network to stop other
people in my building gaining access, or using my connection without my
permission.
I can also connect my mobile phone to my home wireless network, and
again, no wep key is asked for, which is quite worrying.
My Advent laptop has been giving me a BSoD for some time now, the error comes up usually when browsing over the net. I have searched for the answer but have found no solution. Am not sure if this is related but recently I have switched from using a wireless connection to a wired one, the first time I have done this since I bought the machine.
View 5 Replies View Relatedrecently i have been having problems with my browsers. i use both safari and firefox over a wireless network at home.
i can happily surf for around 10 mins with safari, but after that time it is as though i have lost my connection to the internet. i can then use Firefox for a short time, around 5 mins after that, then the same problem arises. in order to get back online i have to restart my laptop.
i have no idea what the problem is, its been doing it for over a week now, and i need my internet as i have university deadlines coming up.
the router/isp are fine, as my flatmates both have steady connections (ones running XP the other Leopard). avast, ad-aware, and malwarebytes all come up clean- though i had some reported malware a week or so ago which adaware dealt with
i have however been trying to make my laaptop as fast as possible without overclocking it, so have been diabling startup services and other non-essental services that eat my precious ram and cpu power.
is it a common vista problem? or have i changed a setting or something thats making it do this?
i have read other threads with simmilar issues, but have not found anything that helps.
I have a Vista Business laptop which I connect to the internet via wireless, and need to VPN to my company. I have created a VPN connection and it works until I'm connected to my company server. I then , and the Network and Sharing Center shows both connections as Local Only. If I disconnect the VPN, internet access is restored.It seems Vista cannot cope with two connections to different networks!
View 6 Replies View RelatedI am finding my internet is slow, I open utorrent or vuse or a torrent program that uses bandwidth and I lose all internet browsing, msn messenger but skype stays online and the torrents download at a slower rate but still download.... as soon as i close any bandwidth sucking program the internet comes back but still a slower speed. i have adsl2+ so speed shouldnt be an issue
View 8 Replies View RelatedI am having the worst problems connecting using a cable connection, which I need because as I am in Europe at the moment, many sites or private homes are not equipped with wireless. Now, when I connect with cable, everything seems to be working fine, the Toshiba connectivity doctor tells me I am connected, the diagnose program assures me that the problem has been resolved etc. etc. and yet whenever I try to connect (IE, Mozilla, Google, I have tried them all), I get an error screen. I have tried everything I could think of, checking my settings etc. Nothing works.
Let me emphasize that:
1) wireless connection works fine
2) it is a problem with my computer, not the host, since I have encountered
the same problem everywhere (libraries with password protected access,
private homes without password protected access etc.).
With Vista, I can get internet for my new Dell XPS laptop over the wireless connection without doing anything other than selecting the connection. No user name or password is needed. But to plug in directly into my cable modem, it does not work. Seems to require user name and password. But I use Verizon and a Motorola SB5101 modem and while it is broadband, I did not think it is pppoe. I don't even know of any user name or password for my account. Am I wrong, is all broadband pppoe? My internet connection works just fine without asking for pppoe login info when I use my desktop with Windows XP. So, it seems to Vista specific problem.
View 6 Replies View Relatedmy computer is not holding it's internet connection, even when i refresh it just wont reconnect and i end up having to restart and then the connection is fine. I'm running Vista Home Premium, Defender, ZoneAlarm (free) and Avast (free). Broadband connection. is there anyway to secure the connection permanently (which it should be) Have i, a setting wrong? At all times my internet icon says i am fully connected?
View 9 Replies View RelatedI use Window Vista. I have no problem connecting to the internet if I use a normal cable but when I use my wireless LAN AP, my PC can detect the wireless router with no problem at all but then my PC could not connect to the Internet (the Earth). My wireless router is a IEEE 802.11 LAN. I believe this is related to some codes or something that I should enter?
View 4 Replies View RelatedRecently when using Skype, my microphone is very scratchy when I am on wireless. I thought that it was the microphone. However, if I am on a hard wired connection, the microphone is fine. Also an external microphone works fine even when I am on the same wireless connection. I am in China, need to talk with family. I have a Toshiba Satellite laptop. My wife has the same computer and hers works fine on wireless. So I don’t feel that it is the wireless connection.
View 9 Replies View RelatedMy wireless is not turning on so that I can connect to my home wireless network. The wireless is set to "on" on the switch on my computer. When I reset my computer, the light turns on as if the wireless is working. As vista starts up, the light and wireless connection remain active, but as soon as vista is done starting up, the light indicating my wireless radio is on turns off and I can't connect to any wireless
network.
Does this make sense? other computers in the house are connecting fine to the wireless but my computer is dropping it before i can even connect.
My son's got a Vista laptop running off a wireless Linksys router. It's been running great for almost 2 years but for some reason his wireless connection recently went from `secured' to `unsecured'. Have no idea what caused this change. Nothing was done to the router. Can anyone tell me how to re-secure his current wireless connection? Perhaps there are some MS sites out there that can provide step by step directions.
View 9 Replies View RelatedI cannot connect to my wireless network after reintsalling Vista on my notebook. I hvae an HP dv6139us notebook. I can see the newtork and I can try to connect but everytime I try to, it does not connect for an unknown reason. I have a secure network and i put the correct passphrase in as all my other computers connect with no problems. I have also dover a little deeper into this and when you look and the nwetwork and sharing center and click view full map, under the drop down menu there is an error message that states, network adapter is not enabled. How do i enbale the adatper? As I have checked this in the device manager and it shows that this is enabled. I am totally confused and lost and about to pull my hair out.
View 6 Replies View RelatedHave installed vista over xp everything fine except my wireless connection press switch but have been told software update or driver needed for acer aspire 1690 anyone know where I can look? my belkin adaptor allows me to connect fine.
View 4 Replies View RelatedVista HP 32bit....When I power on my laptop after not using the Power off.....so its coming out of Sleep....and you see RESUMING WINDOWS.....9 out of 10 times I won't get connected to my Router. I have used the Diagnostic Tool...and get the same results, which is, power off the Router...and power it back on...and when I do that, I do get re-connected.
View 4 Replies View RelatedI've been having this issue ever since I bought my new tablet pc. I am connected wirelessly to a network here at work. I've never had an issue with any other computer before until this one. I'm using a Vista 64 ultimate and this is my issue. I connect to the wireless network... I can browse the internet just fine. I have a shortcut on my desktop \192.168.1.200location Once I click on that it ask me for my user id and password so I enter and I then get to the network folder. After a few seconds it says Not Responding and I can no longer connect to the network or the internet although I can ping all internet addresses just fine. Disconnecting from the wireless and reconneting does not work... Disabling and reenabling doesn't work either. I have to shut down the pc and restart for it to come back up.
View 4 Replies View RelatedAm using a Vista (Dell Inspiron 1525) laptop to access a Lyncsys network and keep getting nabove message.
View 4 Replies View Related