Updates After Boot And Shutdown
Nov 28, 2008
Sometime after 24/11/08 I installed about 4 vista updates, after which boot and shutdown times greatly increased. By which I mean, when you get the green sliding bar when booting, pre-update I would get between 6 and 11 bar progressions, after update I got 50 to 51, before completing the boot. I've now turned off updates completely and system restored back pre- 24/11/08, and alls well again. From looking at these forums it seems I am not along with update issues. I'll leave updates turned off I think.
View 8 Replies
ADVERTISEMENT
Oct 8, 2009
The initial configurations done as per the setup and wizard instructions provided by hp. After some time, suddenly the system performace was too slow and it has given me a huge shock and made me think like i've wasted my money! BUT after installed the windows updates, it's performance increased tremendously. There is always the alert which shows install Windows updates. Even when i tried to shutdown the system, it pops up 'Install Updates and shut down'.
So i've installed the updates almost every day otherwise it will not allow me to perform any operations. Is this expected behaviour? Can't we work without installing any windows updates atleast for a month? I am afraid may be some performance issue on this model! Due to these every day installation of windows updates, its killing my hard drive like anything.. Intially, in C drive, the free space was 243 GB of 260GB, now its reduced to 225GB of 260GB. I am loosing my memory because of this updates.
View 5 Replies
View Related
Apr 5, 2009
First of all I would like to say I love this forum if it wasn't for this forum my Desktop/HDtv(as my monitor) would have a keyboard stuck in it. Why you might ask, well I was stuck on "Updates Configuring 3 of 3 - 0% // then Shutdown" and repeat. Also I'm a new Vista owner and so far its been shaky but I plan on over coming it. NOW!, To why I'm here, I keep my desktop empty and use the Dell Dock (Mac style Dock that came with my Dell). I cleaned out and disabled most of the stuff on the startup I don't need. So the problem I'm having is that the Dell Dock is the last thing to load after my antivirus and firewall and spyware programs. My question is, is there anyway to make the Dell Dock load first? Is there anyway to do this even with registry hacking? I want the Dell Dock to load up before most of the other startup programs.
View 4 Replies
View Related
Oct 6, 2009
last night before bed I clicked shutdown and install updates in Vista. I woke up this morning and my computer will not turn on. It leads me to this: Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. Insert your windows installation disc and restart your computer.
2. Choose your language settings, and then click "next"
3. Click "repair your computer"
If you do not have this disc, contact your system administrator or computer manufacturer for assisance.
File: BootBCD
Status: 0xc000000f
Info: An error occured while attempting to read the boot configuration data.
problem I have is that I do not have vista installation dvd. I am currently studying abroad in Rome and will take more time than I have to receive the dvd in the mail. None of my friends here have one either, but they all have the same make and model computer that I do. Is it possible for one of them create a installation dvd that I could use? Or could they make a recovery disc that could as least get me to the system recovery options screen?
View 7 Replies
View Related
Jun 24, 2008
I am proffesional .NET developer working with C and SQL. Because of new features of the new MS products I was switching to Windows Vista Ultimate 32bit. My Vista runs on: ASUS Striker II Extreme with QuadCore 2.5 GHz. 4 GB Patriot Memory, 2 GeForce Grafikcards with 4 Monitors, 300GB Fujitsu SCSI disk.
I hade always some problems with booting and Shutdown.Somitimes I had to start the pc 4 times until it runs. Also somitimes it was not Shutingdown ... When it was up und running, all was ok, except somitimes Network does not work ... Finaly now, the system was running fine and I plugged in a webcam and it was starting to install forever ... After about 1h, I switched off the pc and now it does not boot any moren ...When I try to boot in SaveMode, it stopps at crcdisk.sys. I cannot even boot from install CD ... What should I do now ? Buy another harddisk and install a fresh copy of Vista ?? Buy another harddisk and go back to Windows XP ?? Or ist there anybody out ther who knows a solution ??? I really need to work with my pc and I would be happy for any comment on this issue !!
View 4 Replies
View Related
Sep 16, 2009
I have a question about Vista. I have 2 laptops. One of them has shutdown and wont boot up the login screen... but it turns on. Now that Laptop came with Home Premium... and the one I got (new) today came with Home Basic. Can I use any premium Boot Disc, and use the serial from the old laptop?
View 3 Replies
View Related
Jun 3, 2010
My PC used to take a few mins to boot and 30 secs to shutdown but now it takes around 4.5mins to boot to the sidebar appearing amidst incredible disk activity (which has always been the case) - if I then click on IE it takes around 80 secs to load as the disk is going bananas for several minutes and the PC isn't really useable for 5 minutes until the disk settles down (which has been getting worse over the last 6 months)
Quite often (40%) boot freeze on MESH splash screen and needs rebootPC - quad Core Mesh PC 2.4GHz - 4GB RAM - VISTA all up to date - 1 x 500GB 1 x 1TB - external - USB ipod/printer/1.5tb backupI've tried disabling obvious candidates in startup/services but to no avail - not a gaming PC .......
View 9 Replies
View Related
Jun 6, 2008
When I go to re-boot or shutdown.. I get a very fast screen flash that states that my explorer.exe is still running then it shuts down and restarts like normal. I don't remember seeing it before the last few weeks... it is very fast and doesn't allow me the chance to do anything but notice it.
View 6 Replies
View Related
Nov 23, 2009
I installed Windows Vista Ultimate on several machines without incident. Yesterday I installed it onto my desktop. A Gateway that was previously running Win XP I had backed up my hard drive to an external becuase I wanted to do a clean setup. I chose those uptions as they appeared in the setup screen. The os set up fine. I then ran Windows Update. AFter everything downloaded I let the system install the 87 updates. The computer shyt down. I restaeted it and re-ran updates again. After downloading it installed about 7 more updates and shut down. Now when I turn on the machine. I get the "Splash Screen" tehn a black screen and in the top left corner it says: Booting "Windows Vista".....
That hangs for about two minutes then I get a screen that says Setup is inspecting your hardware configuration. Then a screen that says: The file ARFSPK0N could not be found Press any key to continue. I press a key and I get a Setup Failed and it just basically goes back to the beginning. I have tried installing the Original XP setup disc that came with my computer however it reads it then I get a message saying that Drive "R" could not be read and then my CD drive door opens. There is no disc in that drive as the setup disk is a DVD so it is in the DVD drive. I went into the whole setup screen and chnaged the boot order but nothing seems to work.
View 8 Replies
View Related
Jun 13, 2007
I have read elsewhere of some users experiencing the problem of hard disks making the infamous clicking noises on shutdown of any version of vista. I don't know if its only SATA HD but thats what I have and I am experiencing the same thing. It has me concerned that the clicking of the HD arms might be unnecessary wear and tear. any fixes for this?
View 6 Replies
View Related
Mar 11, 2010
Desktop PC will be one year next month. I did not renew the Microsoft Office after trial period that came as a package w/ no future intention of acquiring it. I'm using the free Open Office program - word processing mostly at this time. Is there anything in the list below that is of importance? I only have a basic PC with DVD player for movies, etc. No scanner, printer or fax. Not even external hard drive or usb flash drive. Otherwise, I understand that I can just choose to hide the updates, so it will not keep reminding me. Also, I choose to keep my OS w/ Srvce pk 1 and MS IE version 7 for as long as I'll be able to. I had too many probs with Srvce pk 2 and MS IE version 8. Your opinion, if any, is welcome.......
View 9 Replies
View Related
Mar 29, 2009
I have Windows Home Premium 64 Bit and every time I restart I get a message saying 1 to 3 updates ... I then see this message again on startup. I feel like something is wrong with the update system. I reinstalled Vista and disabled automatic updates. However, after a while I started to get the same problem. I have Office, Visual Studio, Messenger and a few Adobe products installed.
View 9 Replies
View Related
Jan 1, 2009
I went to turn it on this morning, I just had a black screen showing the following words;
Press F2 to run
Press F11 to boot menu
Auto detecting PRI Master Atapai CDROM.
It then went to reboot and select proper boot device or insert boot media in selected boot device and press a key. I went into the BIOS to change the boot order and inserted my Vista home premium 32bit. I then got windows is loading in files. After a short while I got the black start up screen with Microsoft Corporation but after a few seconds it just froze. Moments later it went to a blue screen with white writing part of which said the following; A PROBLEM HAS BEEN DETECTED AND WINDOWS HAS BEEN SHUT DOWN TO PREVENT DAMAGE TI YOUR COMPUTER.
View 9 Replies
View Related
Apr 3, 2009
Yesterday after a week long holiday, I came home and started my computer which ran fine until this afternoon.
I was out and about doing things and I left the computer on and logged online as I usually do.
When I came home, I found it had shut down and restarted and I was at my Windows Logon screen.
I figured we must have had some sort of electrical outage, so I logged in and let my Intel RAID storage manger do it's thing (it has to re-verify and re-match the data on my two RAID 1 drives).
I wandered back in a few minutes later to find the computer had gone into a CheckDisc. Check Disc didn't find any bad things so I let it run through and restarted, now all seems well again.
I am curious as to why it might have shut down in the first place and not quite sure where to look.
Control Panel>Administrative Tools>Event Viewer says no critical errors, just one error message that says the shut down was unexpected.
View 9 Replies
View Related
Mar 14, 2009
Today i am getting windows has recovered from a shutdown, click for solution, no solutions come up,in fact nothing at all comes up, all seems normal till it happens again, usually after just being left on but not being used. attatched is the messge i get. Problem Event Name: BlueScreen
OS Version: 6.0.6001.2.1.0.768.3
Locale ID: 2057
Additional information about the problem:
BCCode: 1a
BCP1: 0000000000041289
BCP2: 000000018050B001
BCP3: 000000000000674D
BCP4: 000000018040B501
OS Version: 6_0_6001
Service Pack: 1_0
Product: 768_1
Files that help describe the problem:
C:WindowsMinidumpMini031409-03.dmp
C:UsersLindaAppDataLocalTempWER-84505-0.sysdata.xml
C:UsersLindaAppDataLocalTempWER4F95.tmp.version.txt
Read our privacy statement:
Microsoft Online Crash Analysis
View 9 Replies
View Related
Jan 27, 2009
I have a new Dell XPS 730x running a clean install retail version of vista ultimate x64. I had 5 Disruptive Shutdowns on the first day of use and 2 on the second. Is there any way of diagnossing what is causing them? I have checked all the hardware and software with microsoft to make sure it's compatible with vista x64.
View 7 Replies
View Related
Jul 12, 2008
Since installing the latest Nvidia Graphics Driver 175.19, I've had a bit of an issue when I go to Restart or Shutdown my PC. After I click-on Restart or Shutdown, the Logon screen appears, then it goes back to the Desktop Screen, then back to the Login screen and Restarts or Shuts Down correctly. I'm not sure whether it may have something to do with the Task Scheduler (and Windows Sounds possibly)
View 7 Replies
View Related
Oct 20, 2008
I have a problem in that anytime i shutdown the computer it goes ahead shuts down. fans shut off etc but then restarts about 5 seconds later. No errors show up on the screen at all.
View 7 Replies
View Related
Dec 11, 2009
Vista Home Premium Sometimes when I try to shut down the PC - START-SHUTDOWN and either shutdown or restart - the shutdown can take, literally, 60-75 minutes and sometimes longer. Since I usually don't have that long to wait, removing the power cord is an adequate substitute. How can I eliminate these eternal shutdowns?
View 5 Replies
View Related
Jul 2, 2008
i use the sleep function a lot because i like to get straight back into whatever i was doing. I was wondering if i could use hibernate instead of shutdown on my pc so i can come straight back in the morning & carry on with whatever i was doing. Is it safe to do this? And can i turn off my mains supply without affecting my hibernated pc?
View 5 Replies
View Related
Dec 11, 2007
I recently added a new hard drive to my system to give me a bit more storage room. All drives in the system are SATA, 2x Raptor 36GB, 1 Plextor DVD burner, and the new Samsung 250GB. The Raptors are currently not in a RAID. What occurs during Vista shutdown? It may give me some more insight into my problem.
During shutdown, the new drive gets thrashed for 3-5 minutes before the system drive updates config and shuts down. Could this be some sort of conflict with the controller? Raptors are SATA 150 and the Samsung is 300. Is Vista writing a system restore to that drive at shutdown? (A friend theorized that, and it sounded logical enough)
View 5 Replies
View Related
Mar 27, 2008
My Vista very often hangs, usually on shutdown. I have to pull the plug. Will this damage my laptop if I keep doing it? I have to though cos its hung. Problem Reports and Solutions is useless of course it doesnt specify anything. If it wont damage the laptop then I can just keep pulling the plug when it happens.
View 6 Replies
View Related
Jul 29, 2009
Brother purchased new laptop. Vista Home Basic 32 bit SP1. Turned on machine and connected fine via ethernet cable to home network. I logged in remotely and watched and acted when required as both Vista and McAfee downloaded and installed numerous updates. On one occassion when asked to restart now or later after McAfee finished updating, I chose later. I then installed LogMeIn on this computer so that upon reboot I would have more control.
That may or may have nothing to do with issue now but ever since then, when warm or cold re-start of computer is done, computer does not obtain an IP. Have to go to CPanel/Network/Diagnose and choose automatic rediscovery of IP which works just fine.
View 4 Replies
View Related
Jun 9, 2008
I leave my pc running to allow various programs to run during the course of the day; however, other users manage to shutdown the system without any thought for my login "at work". Does anybody know of a "Shutdown Password" facility I can use which prevents this from happening?- I know I'm still at risk from the power supply being switched off.
View 4 Replies
View Related
Aug 27, 2009
I've been having a problem on my new dell studio 15 laptop, at first,whenever I closed the lid, I would lose my wireless connection, now, when I close the lid I get an unexpected shutdown. I did my usual research, but it seems that people get this problem for different hardware issues, and there isn't a "one size fits all fix" Here's my error message...
Problem signature: Problem Event Name:BlueScreen OS Version:6.0.6001.2.1.0.768.3
Locale ID:4105
Additional information about the problem:
BCCode:1000007e
BCP1:FFFFFFFFC0000005
BCP2:FFFFF80001FD7B81
BCP3:FFFFFA60015DC798.................
View 9 Replies
View Related
Jun 27, 2009
Never use sleep function but last night instead of selecting shutdown hit sleep by mistake. Couldn't get system to wake from sleep and had to turn off by holding power button. Today when switching system back on i get fan & case lights on , hdd and dvd activity. The keyboard is unresponsive (no lights) and monitor remains in stand by. Mouse gets power but doesn't wake pc. Using reset or power button on case just restarts system to exact condition above. Can't contact pc manufacturer til monday (pc 4 months old). Read quite a few other posts regarding vista sleep issues but haven't found anything that would seem to rectify this problem.
View 9 Replies
View Related
Nov 26, 2008
Am running windows vista enter. 32 bit on my machine.
When i use the turn-off short key (Alt F4), the shutdown window appears and the first option in the drop down list is " Sleep ".
I want to change the order of these commands, like: i want the first option to be LogOff
View 3 Replies
View Related
Mar 23, 2008
My computer has shutdown three times without warning over the past two days the error message that appears is as follows:
Product
Windows
Problem
Shut down unexpectedly
Date
1/13/2008 2:20 PM
Status
Not Reported
Problem signature
Problem Event Name:BlueScreen
OS Version:6.0.6000.2.0.0.768.3
Locale ID:1033............
View 9 Replies
View Related
Jan 2, 2008
I'm running it on Chieftec 410W PSU, which according to ASUS PSU calculator is enough. Actually my previous S939 system needed more(400W) power than my new system(350W) according to ASUS PSU calculator, and it ran well. It quite old though. 3 years probably, but it's not making any noise and it isn't running hot. It has a big 12cm fan which is running fine and apparently doing a good job.
After Vista reinstall my system randomly, completely shuts down (like when unplugged from power outlet) 2-5 minutes after booting up. Booting process is actually succesuful. All drivers running. I checked ;..........
View 9 Replies
View Related
May 15, 2010
I have had an issue twice in the past couple days of my system rebooting on its own. Here is what it says:
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.0.6002.2.2.0.768.3
Locale ID: 1033
Additional information about the problem:
BCCode: 9f
BCP1: 0000000000000003
BCP2: FFFFFA80090BD050
BCP3: FFFFFA80090BD050
BCP4: FFFFFA800D4845C0
OS Version: 6_0_6002
Service Pack: 2_0
Product: 768_1
View 5 Replies
View Related
Sep 4, 2008
i've just taken a headfirst dive into vista and as far as i can tell, besides the UAC, im becoming quite fond of it. heres the backstory for my issue. Purchased a HP tx2510us tablet, it came with vista home premium, I had a copy of Vista ultimate off of the computer my parents bought(they "down"graded to xp pro). downloaded all the drivers off the HP website, wiped the HD and installed vista Ultimate x64. Then i reinstalled all the drivers(the x64versions, i made sure of that. Now the issue. Whenever I turn on or off my computer. the speakers pop. This also happens if the speakers are muted. I'm not sure if this is a driver issue, or somthing else. EDIT* The popping noise also happens when the windows bootup sound plays.
View 6 Replies
View Related
