Security Service Hung On Starting
Mar 23, 2008
From day 1, the PC hangs on start after the normal desktop appears for about 10 minutes. After that time it works fine. Each time I notice the following entries in the event log: The Background Intelligent Transfer Service service hung on starting. The Security Center service hung on starting. The Windows Update service hung on starting. Not sure if these are related. The machine is actually exhibiting symptoms of a 100% CPU utilisation as I noticed that it responds to mouse clicks after a considerable delay. After it's had its spat for 10 or so minutes it works fine. I am also running the Bit Defender Internet Security. Again, not sure if that is the contributing factor.
View 4 Replies
ADVERTISEMENT
Mar 21, 2009
Machine has an issue with the Security Center. Cannot launch most programs but can navigate the internet. Permissions problems prevent me from starting security center services. I know I can wipe the machine but there are some things I would like to retrieve... one being the Office 2007 PID.
View 4 Replies
View Related
Dec 12, 2008
The following is a consistent warning that when this event happens it causes a hang in the os. Was wondering if anyone knows where I can find a driver that can take the place of the nvidia nforce sata control driver as the issue is caused by this driver....
View 4 Replies
View Related
Oct 2, 2009
I am running Vista x64 Several months ago I got a nasty trojan which removed the Security
Center from my computer. I didn't think it as a big deal as I have several other anti-viruses installed, but I've come to a situation where I require windows firewall to be on. When I attempt to start windows security center, I get the error "The Security Service cannot be started" .Now according to several other hundred threads, I'm supposed to go to "Services" and change "Security Center" to automatic.The only problem is, Security Center is not under Services as thetrojan removed it.
To make matters worse, HP programmers thought it would be cool to not include a vista OS installation disk, but instead add a crappy program on the computer that would allow you to replace programs, but unfortunately it cannot repair my security center.
View 9 Replies
View Related
May 15, 2010
I have DL a trogen and it seems to affected my browsers. My email works as well as quicken and Limewire as well as other update programs, but both of my browsers say they cannot display any webpages. Also, my security service center cannot be started.
View 4 Replies
View Related
May 16, 2008
I just installed a fresh installation of Enterprisex64 a couple days ago. As I've been building up the system I mapped a drive to another computer on my network and continued to setup the new PC. Last night after installing a couple different DVD Burning programs (Roxio10 & Nero 8) I rebooted a couple times and noticed that my Security Center was turned off. I went into the services, turned it to Automatic and restarted the service.
Then I continued my work on building my system and realized I couldn't connect to my mapped drive, only to realize I could no longer see other computers on my network via Network Neighborhood or by \computername. My other computers on the network can see each other, just not this new box...........
View 6 Replies
View Related
Apr 22, 2009
I keep getting a message that this update is ready to install. I have installed it about 10 times, but after it is installed, I get the update icon and the same update is there ready to be installed. When I look at the installation history, it shows that it has been installed successfully. HOW do I keep this update from showing up time after time? Security Update for Microsoft XML Core Services 4.0 Service Pack 2 (KB936181)
View 2 Replies
View Related
Jan 13, 2009
I'm currently running my upgraded rig on Vista Ultimate 32 bit and would like to have 64 bit installed because I have 6 gigs of ram that I would like to be able to use. My problem is that when I boot from my DVD drive, it says it loads the windows files, but then when its like setting up the install or something (The green bar is scrolling across the screen), it gets hung up then, after a minute or two, becomes a BSOD. 32 bit did something similar, but never gave me blue screen just kept stopping and starting again. I'm stumped.
View 5 Replies
View Related
Sep 10, 2009
I'm running Vista HP with SP2. The update package from 9/8 keeps hanging on the "Stage 3" part. It is in a loop where it is in the configuring updates mode for a while, then does a restart. Next time through, the same thing. It has cycled through this at least 10 times without finishing the updates.
View 4 Replies
View Related
Sep 10, 2008
When I try to perform a wndows update, my 9 month old HP notebook keeps getting hung up or says the download failed. It just says it's downloading the updates but continually says 0 KB total and 0% complete, that goes unchanged for HOURS! I eventually have to stop the download but have several important updates that are waiting to be installed. I dont know what to do. HP says I must remove all saved document and file data and reinstall the whole operating system.
View 9 Replies
View Related
Oct 16, 2009
A friend has an Acer Desktop with Vista. It was installing the latest Windows updates, and 'hung / froze' ( her words ) Now, when it starts, it displays the BIOS screen? Obviously some sort of major problem? I was going to try the Recovery Console first?
View 5 Replies
View Related
Apr 6, 2008
I have a vista HP set to recive auto update .This morning it shows to update XML core service 4.0 service pack 2 (KB936181) I did the update and few second later it shows the same update I did this 3 times and restarted the computer and it is still shows to update the same thing over and over.
View 9 Replies
View Related
Jan 24, 2010
I have the following error message when trying to login to vista on my laptop:
The User Profile Service service failed the login.
User profile cannot be loaded.
Just before the problem happened I was working to remove the Anti Virus Live virus from my laptop via the techsupportforum.com forum.
Two things I did within the hour of the problem happening are:
1. I ran the malware removal program OTL
See step 5 at (http://tinyurl.com/pr92qn)
2. I cleared and set system restore's cash-
as instructed in post#23 on my techsupportforum.com thread
(Anti Virus Live on my Laptop - Page 2 - Tech Support Forum)
Further details-I can and am able to login to Safe Mode I do not have a program called System Restore in the System Tools folder In Safe Mode I was able to change my password, but in normal mode I get the same error message I did windows updates and then tried to remove some of those updates, with only a few files that wouldn't allow me to delete them. Thank you for visiting my thread. If anyone has any ideas on how I can fix my problem it would be great to hear about them.
View 5 Replies
View Related
Jul 23, 2007
Also my Windows Search service does not start. When I try to start it, I get these errors in the event log:
1. "The Windows Search Service cannot open the Jet property store.
The content index server cannot update or access information because of a database error. Stop and restart the search service. If the problem persists, reset and recrawl the content index. In some cases it may be necessary to delete and recreate the content index. (0x8004117f)"
2. "The Windows Search Service has failed to created the new system catalog. Internal error <4,0x8004117f>."
I'm totally lost as how to solve this problem. I spent hours on the web trying to find a solution, with no luck sofar. Anyone here who has a clue how to solve this one?
View 6 Replies
View Related
Sep 13, 2009
currently i have been trying to backup my computer using complete backup on my windows vista ultimate but every time i try when i click the button it says
(X) The backup application could not start due to an internal Error:
The specified service does not exist as an installed service. (0x80070424)
Please check your system configuration and try again.
View 7 Replies
View Related
Apr 16, 2008
I use Vista Ultimate 64.
For the past few weeks I've been having an issue with an Apple made service called "Bonjour Service". That service is used in several pieces of software including iTunes (which I do not use) but also some Adobe applications (Version Cue for example) and the font management utility I use which is Extensis Suitcase 11.0.1 for Windows.
Both Version Cue and Suitcase depend on the Bonjour Service to work and I have had no issues with it for months but recently, the Bonjour Service stopped working and would not start anymore. It now gives this error message when trying to start it:
"('Bonjour Service' failed to start. Verify that you have sufficient privileges to start system services."
My user account is an admin account so privileges is not an issue. I had made no changes to my system myself before the Bonjour service began to "refuse" starting but I remember that I installed a few Windows updates a couple days prior. My machine is always on and I don't re-boot everyday.
So I was wondering if anyone has heard of the issue and knows how I might fix it or if anyone can give me pointers on how I my start trouble shooting this and find what started preventing the Bonjour Service from starting. FWIW, the Windows Firewall is already off and turning off my anti-virus doesn't help (Eset NOD32).
View 9 Replies
View Related
Jun 29, 2009
My computer is running the concistency check. It's at stage 3 and when it's almost complete it's starts to "replace invalid security Id with default security id for file ******" it's been doing this for a while now and I was wondering what I can do to speed it up. It's currently at 170000, and if I try to restart the computer the login screen will not load if I skip the disk check.
View 9 Replies
View Related
Dec 2, 2008
I got Vista 32 bit installed on my laptop. I work from Internet And need a good firewall and security suite which can protect my computer from trojen and malewars and hackers. Currently i am using kaspersky as my internet security and in past i have used Norton Security suite, In Both I have noticed getting too much of hacking attempts 3/hr.
View 9 Replies
View Related
Feb 21, 2009
Just trying to startup my laptop but all it is doing is showing the green bar going forward and nothing else happens, I can boot into safe mode ok and have also tried last known good config and booted from the Vista disk to do a restore, but still doesn't work.
I have also gone into msconfig and disable all non microsoft services and everything in startup.
View 9 Replies
View Related
May 4, 2009
Since getting the new machine, I have had continuing problems with keeping my extra dvd drive and HDDs operating (Code 43). After getting that solved I started experiencing problems with the HDDs not starting (Code 10). The dvd drive is always recognized, starts fine and stays running. Now my HDDs either will not start or aren't recognized. On the HDDs that don't start, I get a Code 10 error.....with a little more diagnostics I get an error message that Windows can load the driver software, but the software encounters a problem when trying to run. The driver is a Windows driver 6.0.6001.18000, not a third party driver.
I have extensively verified that ALL my hardware is Vista 64 bit compatible, is operating properly, all my drivers are up to date, all cables are tight, etc. In short, I have proven that this is not a hardware failure. I have even had one dvd and one HDD connected (on different Oxford boards) and operating correctly, but after an overnight reboot, the HDDs cannot be started because of the driver software problem.
The drive manufacturer, Western Digital, refuses to support EIDE drives connected via bridsgeboards to Firewire. The computer manufactuerer (HP) is equally clueless and their Tech Support doesn't even seem to understand the problem. They cop-out by saying it's a Microsft problem. And because Vista is pre-loaded, I don't have OEM disks to try a clean install....I can only do a System Restore.
View 4 Replies
View Related
Dec 20, 2008
When I start my laptop up, just normally, I log in. I have that thing where I have to log in using a username and password, something that I downloaded and put into my registry. Anyway, all the time, when I log in, it takes forever to load up, it just stays as welcome and doesnt load. I left it for half an hour and it still hadnt loaded! So, I turned it off and on again, and it worked. But, a couple of times, I had to turn it off and on about 5 times ,and when it didnt load, I had to start it again in safe mode. THEN it worked. But, I hate safe mode!
View 9 Replies
View Related
Jun 20, 2008
I have a Dell Inspiron running Vista. Had no problems until recently when the screensaver started to refuse to work. Even when I go to screen saver settings and select preview the screensaver just comes on for less than a second and goes off again.
I have got a wireless mouse but have always used it, I have tried unplugging it, but to no avail. I have also tried a selective startup with only microsoft programs on startup, but still no joy.
View 6 Replies
View Related
Jun 9, 2009
When I try to re-start Windows, the computer shuts down and try to start but instead beeps three times and don't start, then I have to press the power button to shut it down and wait about 10 minutes before starting again.
I have Windows Vista x64 on an Asus P6T Deluxe Intel X58 motherboard with 12GB RAM and an Intel i7 Extreme processor 965 with a Sceptre widescreen 22" monitor and a Thermaltake V1 cooling Fan with 800 watts power supply
View 6 Replies
View Related
Dec 13, 2008
Earlier today my computer had updates to intall so i clicked to install updates and shut down. This evening when I went to turn on my computer it said that iy had to run disk chk as it did this it said that file after file was corrupt and repairing this took a few minutes. After this the normal log in screnn appeared. I clicked on my name typed in my password then the screen went black and the pop up went as follows
Windows Activation
Reinstall Windows
Windows must be reinstalled to activate. Insert the windows installation DVD or CD into your computerto begin the reinstallation process.
I placed the cd in and nothing happened. I then started in safe mode and tried a system restore, but then I found I have no system restore points anymore. I tried to start with last known good start up but the same message appeared. I do not want to have to do a clean install as I have important work on my computer which isn't backed up.
View 6 Replies
View Related
Jul 8, 2008
I just installed a new video card MSI NX8800GT on a new Packard Bell that came with Vista pre-installed. I checked power supply which was sufficient (400w). Everything went smoothly also when installing the drivers which came on an MSI CD. When restarting the PC he blocked when he was on the desktop screen. After that it has been impossible to restart the pc. He blocks even before he starts uploading vista.
View 7 Replies
View Related
Mar 23, 2008
For some reason, Vista crashes as soon as a DVD (hardware or virtual) starts to play (BCCode e3). LiveTV and AVI play without any problem.I deinstalled some programmes, one of which was Nero 6 Express.This Nero was incompatible, but wanted to try it anyway. Although i cannot pinpoint the cause of the crashes, but i suspect my Nero experiment. Anybody any 'serious' clue of how to fix this?
View 4 Replies
View Related
Feb 2, 2010
Today, I was forced to use my Vista Ultimate installation disc to reinstall Vista - since yesterday morning, my computer was not able to get out of a loop (first going to Windows Error Recovery and then, when selecting any of the options, going to the green loading bar, where it the green bar stopped moving about 2/3 of the way, and going back to Windows Error Recovery).
The installation went smoothly enough, but I am absolutely clueless how to get my computer to roughly the same conditions it was before this fiasco. Fortunately, it would appear that all of my files and folders from before this re-installation have been saved in the folder Windows.old. However, I am at a complete loss as to how to reconfigure my Internet connection, how to restore my previous screen resolution (there are now only three options for resolution under Display Settings), and essentially getting the basics back in order.
View 9 Replies
View Related
May 2, 2008
When I attempt to start stopped services, ThinkVantage task scheduler, in the Task Manager on a Thinkpad R61i with Vista, an error message says "Access Denied". If I try to start the services from Control Panel > Administrative
Tools > Services, the PC hangs.
View 9 Replies
View Related
May 9, 2009
Hello, I came accross your forum and decided to give it a try since I saw the helpful people posting in other threads. I've asked this question in many other forums but no one seems to know whats wrong. For a few days now my PC would start and get to a black screen with a blinking "_" in the upper left corner. I would turn it off then turn it on again and it would work. I figured I'd just clean the dust out of it and do a factory restore later on (which I did).
But since yesterday, I've had to do 4 or 5 restores to set it to factory condition. It gets to the point where I get to that screen and I wait 5 or 10 minutes, then the screens says "fail to boot disk, please insert disk" or something. so I place in the disk that my PC promted to make when i first got it (for restoring and repairing it and such) and then everything works again. but eventually with all the automatic updates i have to restart of course, and it starts up again fine, but
after about 2 or 3 restarts it fails again.........
View 9 Replies
View Related
Mar 1, 2008
i got a new graphic card installed in my computer, but when i hooked everything back up and started it up, it didnt really "start", bcuz the monitor goes blank on me then i restart it again and i get the same results.
View 5 Replies
View Related
Jan 3, 2009
i recently bought a new 500GB SATA 2.5" Internal Hard Drive for my Dell Inspiron1501 using Vista Home Basic 32Bit. I took my old hard drive and backed up all of the files i deemed nesseary on a seperate external, than shut it down, and swaped the hard drives. When i rebooted, i instered the vista installation disc, and i began to run through set-up. The error came when the box said it could not transfer files from D: Sources to C:$Windows.~LSSources, and error code 0x80070001. I have looked it up, but the only info i can find is when backing up your fils, not installing from strach. Please offer any assistance.
View 5 Replies
View Related
