I went to run disk clean up, and in the Windows Error Reporting section I have over 60 gigs of "data". Anyway,I thought that was wierd so I looked into it, and found out there was a bug. But I got the registry fix from this site, and that didn't change anything. Also I checked my registry editor and it looks like it is all there. How can I make sure I don't have this "bug" that deletes my OS?
View 4 Repliesis it save to clean all the files that are checked. i will gain 2.57 gb. let me know please. i will post the picture on my next post. here is what is checked
View 9 Replies View RelatedI downloaded the extended disk clean up shortcut, right clicked, ran as administrator, had all checked except for setup log files as strongly suggested, clicked ok, it said it was calculating the space I would regain by cleaning, it went straight to cleaning without showing the amounts in each checked section, and finished. I ran the utility to see about the error bug in reporting the size of the amounts as discribed and wanted to see if I had this bug to worry about. Why didnt the disk cleaning utility show me the amounts found in the locations and ask me if I wanted to go ahead and delete all the files? anyone?
View 5 Replies View RelatedI was going to run SP1 Disk Clean up tool but I need clarification from this warning from BRINK:
"WARNING
Running the Windows Vista Service Pack 1 Disk Clean-up tool permanently removes the ability to uninstall the Vista SP1. Do not run this tool unless you have no plans of uninstalling the Vista SP1 and just want to save or regain hard drive space. The only option to remove the SP1 after using this tool is to do a clean install of Vista".
If for any reason I need to clean install Vista, would this be a problem? In other words, would I be able to... after having used SP1 Disk Clean up tool?
Does anyone know why Disk Cleanup will not clean the recycle bin? CCleaner cleans it just fine.
View 9 Replies View RelatedIt's about a HP Compaq 6710b laptop, with Vista pre-installed.
After doing a disk cleanup, I cannot login.The system boots up, I get the users icons window, but after select and input the password, I'm stuck in 'Welcome' window for ever.
I can login in safe mode, I activate the built-in administrator account, I create a new account (administrator) but no use, trying to login with these new accounts, get same results.
I made the ntbtlog file - last line is about loading the cdfs.sys file.Tried system restore, startup repair - no results, same issue in login.Can I get some ideas where to search the reason and eliminate the cause?I'm trying to avoid 'new clean install'.
System showed that my E: drive (DVD RW) is full. The pie chart is blue. There is no options to disk clean or to compress like the OS C: and local D: drives. Can I or should I do anything about it?
View 7 Replies View RelatedMy acer notebook is about 9 months and has turned really slow. i think it needs to be seriously cleaned up. I have done scans using Macaffee, windows defender, disk defrag, and clean up. But nothing seems to help the speed. Does anyone know what i could do. on other sites said about using the eRecovery but not 100% on using it.. any help to get my laptop back to its original state would be helpful 64X2 dual core processor with 1 gb ram. 32bit os vista
View 4 Replies View RelatedI no longer get this option whiule shutting down. Since, i once did "disk clean-up" and deleted some hibenation related files (i dont know what they were).
View 9 Replies View RelatedI built my computer about 8 months ago now, and all has been running well up until two days ago. When I went to start my computer I received a "Disk Read Error". After doing much research I managed to restore the MBR and Boot Loader, and Vista booted fine. It also ran fine for about an hour, then I shut it off and went to bed.
I go to start my machine today to find out that it will start, however when it does I see my desktop for a fraction of a second before receiving a black screen. For whatever reason, explorer refuses to stay open, and constantly keeps crashing. If I'm quick enough, I can launch my browser (it's one of my quick launch icons), however I can do nothing else on the computer really. I tried using the start bar, which will stay on top of the black screen, to no avail.
I then went to the command prompt and tried to access my HDD's to see if they may be failing, although it seems I can browse them fine. I restarted into safe mode, only to have the computer freeze when loading the basic drivers, and go no further.
Now comes the really oddball part. I stick my Vista disk in so I can run its startup check, and it takes forever to load. By forever, I mean a good 20-30 minutes of time just hanging. Even when doing operations on the disk GUI, the computer hangs. This makes no sense to me at all since nothing is loaded into memory, and it's just reading off the disk.
I checked my temperatures and nothing goes above 40C, so my processor isn't overheating like I thought it may be. Unfortunately I have no restore points to go back to (I thought Vista automatically created these every once and a while, I guess not), so I'm stuck troubleshooting what I have.
What I do not want to do is restore my computer. I have far too many programs on the system to be willing to go that far, unless I really had to.
EDIT: Some more info. I have two physical hard drives, partitioned into three logical drives. I can browse one of the drives fine (it's partitioned into two logical parts, both function fine), but if I attempt to do it to the other drive, the computer hangs. Even if I go into the console and try to access the drive, or if I try to scan the drive with my anti-virus, they all hang. I assume this drive is bad.
Would that really cause every other part of my computer to hang? I've always thought if you left the bad drive alone it wouldn't do anything to performance, but I may be finding out otherwise now.
Specs: HP Pavillion m8100 n.
System: 32 bit
OS: Windows Vista Home Premium
AMD Athlon 64x2 Dual Core Processor 5600*
Welll I have an HP Pavillion m8100n TV PC and a couple of months ago the computer froze and I restarted it but it gave me an error saying there was a boot disk error and I had no idea what to do about itI recovered the computer but a week later same results and now I tried to install Home Premium again and it's giving me errors like:
DRIVE_IRQL_NOT_LESS_OR_EQUAL, and I have NOOO idea, what it means..and at the bottom with techincal information it says: *** STOP: 0X000000D1 (0x0000000000000000, 0x0000000000000002, 0x0000000000000000, 0xFFFFFA60012FC23E)
*nvstor.sys - Address FFFFFA60012FC23E base at FFFFFA60012F6000, DateStamp 46671a38, and I have no idea what to do. And when I tried installing Vista it worked the first time...for like one day than it get all those errors I just mentioned..and in addition to all those bad problems, my recovery partition of the computer was deleted.
I have a Dell XPS M1530 Laptop, running Vista Home Premium 64bit. I have support from Dell but they have been unable/unwilling to save my data in the past so I'm exploring my options before calling them. My computer threw an error and then froze so that I couldn't close any open programs or access task manager or shutdown/restart. I was forced shutdown by holding the power button. On turning the computer back on, I got a "disk read error, use ctrl/alt/del to restart" response. Using ctrl/alt/del simply causes the same error to repeat.
I can access F2 and F12, but not F8. I have tried both my Dell Vista Reinstallation CD and a Recovery CD made using the tutorial on this site (found here: Create a Recovery Disc). In both cases, I have to use F12 to get it to boot from the disk. It says "loading Windows files" and then shows the little bar with Microsoft below it. Afterwards, however, it never gets to the system recovery/repair options screen...or indeed any request for input at all. It simply shows a black screen and the CPU seems to be working at something but never does anything. Occasionally, I will hear a little blip sound. Like most folks, I'm desperately hoping to retrieve data I haven't backed up in a week or two, some of it absolutely irreplaceable! If anyone has any suggestions for getting in to backup data in any way, I'd be immensely grateful!
I have Vista Home Premium running on a 320 GB hard drive. I keep getting the low disc space on C: error message, and when I click on My Computer, it says I only have 189 MB of free space on the C: drive. However, when I click on the C drive, highlight all the folders, and click Properties, it says I am using 26 GB of space next to "size on disk". I tried to solve this problem about a week ago by moving 30 gigs of music to an external hard drive, but the C drive has filled up again even though I have not added anything to the C drive. I've also tried using disk cleanup and defrag, but that hasn't worked. This seems like a pretty serious problem. What's the deal?
View 3 Replies View RelatedI ran the disk cleanup wizard the other night on my C drive. It scanned my C drive as normal and then came up with results to clean, one of which was for error reporting logs which wasnt ticked by default, but was apparently 99gigs worth! I thought this was pretty interesting seeing as my C drive is only 32gig big, so out of curiosity I ticked the box to cleanup the 99gig of logs, and sat back and watched. Everything seemed fine after it finished, but I rebooted to be sure and then my wallpaper went missing. I went to set the wallpaper back to what it was..... and noticed the file was missing. Then I checked the start menu, all my programs have been removed! (example, powerdvd gone, alcohol 120 gone, winzip etc all gone and nothing working, not just removed from the start menu, but also uninstalled from hdd)
View 4 Replies View RelatedWe have the Microsoft corporate program where you get the products to use through the enterprise. I have been trying to setup a test machine with the 64 bit version of Vista so burned the ISO we created for safge keeping off of one of our network drives. Disc seemingly gets created without issue however when I place it in the DVD drive and choose boot from CD/DVD I get the invalid system disk error just after it says this.
View 5 Replies View RelatedThe following was sent to me as a PM. I have reposted it here so that others may be able to assist Betsy with her problem. Quote: Originally Posted by bessiemickol, i have tried everything, my computer will not start up and when I put in recovery disk I recieve an error message on disk 7 0x4001100200001005, I have recovery and repair cd and it does nothing states I have no driver or any operating system on the computer and when I try to install it will not stating that i am missing driver. I have been looking for answers for days now and many hours but I see you do know what you are talking about a lot,
View 5 Replies View RelatedI'm using Vista Home premium on an HP laptop. Yesterday the screen became stuck and unresponsive, I switched the computer off then on and after the normal repair / assessment of disk errors etc tried to log-on, the screen got to welcome with active cursor but got no further. I entered safe start-up to try to restore system to a point in time, but the Help system instructions to manually set up the restore point didn't correlate to any of the available options on the system, I'm not sure if an Windows automatic update has caused this.
View 4 Replies View Relatedwhen i insert my windows vista update disk, the computer reads it then ejects it with no error message or anything. i installed XP on in a few days ago and activated but didnt register it. i figured that this was happening because i didnt register it but now i cant find where to register the XP.
View 4 Replies View RelatedWhen I run Windows Vista's Disk Cleanup program, I get this list of "Files to delete" window listing showing Downloaded Program Files, Temporary Internet Files, Recycle Bin...and one that is really BIG. It reads "Per user queued Windows Error Repo..." I can't expand the window to read it all. The size is 104GB! (as in Gigabytes). There is also a couple of other files with similar names : per user archived Windows Error Repo...System archived Windows Error Repo..., System queued Windows Error Repo..., My question is can I delete these files safely so I can reclaim some disk space without messing up anything?
View 8 Replies View RelatedWhen I begin installng physx every thing goes ok, but when it is about to finish. Translating things that is not in english: Error 1935. Error when installing assembly. OR "Error when trying to install assembly" Last LINE: "Contact help and suport for more information"
View 9 Replies View RelatedIs it normal for Disk Defragmenter to Analyze the disk AFTER it defragments? I know it does it before and then I click 'Defrag Now' and it proceeds to defrag my hard drive. But today I was watching it and noticed that all of a sudden it stopped defragmenting and the info changed to 'Analyzing disk...'.
View 9 Replies View RelatedI have four (4) hard disks C: D: E: F: all are connected with sata cable and power cable.(of course) The F: is outside from the pc and connected via external SATA and power cable (like usb NOT usb) I know,with USB external hard disk i can use the safely remove option.
Is there any option to safely remove SATA hard disk without Shut Down the pc?
1) Start-Control Panel-Device Manager-Disk Drives-Right Click on hard disk-Properties-Policies-UntikDisable the Enable write cashing on the disk??
2) Start-Control Panel-Device Manager-Disk Drives-Right Click on hard disk-Disable??
i was messing around with virtual disk programs and made 2 disk drives that are not really there. I can't seem to be able to delete them and its really getting annoying. How can i do this?
View 5 Replies View RelatedIs this normal? My disk cleanup shown me a 257GB of files to delete on my 80GB disk. I haven't local network and no external disk. I am using vista home premium with sp1, but this problem was without sp1 too. I attached link (for better understanding) to picture of cleanup.
View 8 Replies View RelatedI am a relatively unexperienced windows vista user using windows home premium at 32 bit on an acer aspire 6920 notebook. I noticed that occassionaly my disk space would drop dramatically without me doing anything. 100s of mbs would just disappear for no reason, so probably being stupid i decided to run the disk fragmenter to try and fix the problem. BUT to my horror i was shocked to find that the disk fragmenter began to eat up my hard disk space big style. I went from 79.7GB to 72.5GB in just over an hour. What the hell happened and can it be fixed? can i get my disk space back? i thought the disk fragmenter was supposed to help your computer not rob it. does anyone else have this problem and can someone please help me? im kinda desparate, i cant believe it.
View 9 Replies View RelatedMy Disk is split into 2 partitions, Vista (C: ) and Data (E, each is about 70 Gb. I do not use the Data partition. I want to delete it and allow Vista(C to use all 140 Gb. The Help pages suggest that if I delete (or reduce the size of) "Data", the free space becomes unallocated? Can I repartition the disk to allow Vista C: to acces all 140 Gb?
View 9 Replies View RelatedWhen I try to open a disk, the driver ejects it and it says please insert a disk into drive. I tried uninstalling and installing the CD RW DRIVER, but it still doesn't work.
View 5 Replies View RelatedI need to replace my wife's motherboard, and I am trying to minimize the amount of change. She is currently running XP, but the hardware is old enough that I cannot simply swap the MBs, because a new board will need a different HAL. I was thinking about installing XP and migrating applications. I was wondering what would happen if I cloned her disk to a SATA disk and installed a Vista upgrade on top of the XP disk. I would run setup and provide the appropriate drivers at the F6 prompt. She has used Vista on occasion when we are out-of-town. I have a separate userID on my laptop that is configured to look as much as possible like XP. The question is whether a Vista upgrade would work on top of an XP image that used a lot of older hardware.
View 4 Replies View RelatedI have an HP DV7 notebook that I recently added a second SATA 500 GB hard drive in the expansion bay. The purpose of the drive is to serve as a data drive. I also intend to store an image of my system disk on this internal expansion drive so that I can restore my system and apps when I am in the field. For most purposes the drive seems to be functioning normally. However, I recently noticed that, without my instructions, HP Updates were installing suipport files on my expansion disk rather than on my system disk and I have become concerned that Windows Updates may also end up on the expansion drive (so far they appear not to have done this). On further inspection in Computer Management - Disk Managment I discovered that when I put the expansion drive into the 2nd bay, my original system disk was automatically bumped from the Disk 0 position to the Disk 1 position and my expansion disk became the new Disk 0.
In Computer Managment - Disk Management the system currently looks like
Disk 0 - F: Expansion Drive - Healthy, Primary Partition
Disk 1 - C: - Healthy, System, Boot, Page File, Active, Crash Dump,Primary Partition.
If I physically pull out the F: drive from the machine the C: drive returns to the Disk 0 position. I am concerned that my system and application updates are going to get splattered across two drives when I want them to remain on the original C: drive. I can find no way in BIOS or Computer Management - Disk Management to assign the Disk and physically swapping the drives makes the system disk unbootable. Am I at risk of splattering my Window updates across two drives? Should I instruct Vista to regard my system disk C: as Disk 0 and how to I do this?
After months of working fine, suddenly received the following messages: The connection to the server has failed. Subject 'Balance due on account', Account: 'Windows Mail', Server: 'mail.charter.net', Protocol: SMTP, Port: 25, Secure(SSL): Yes, Socket Error: 10061, Error Number: 0x800CCC0E
The connection to the server has failed. Account: 'Windows Mail', Server: 'mail.charter.net', Protocol: POP3, Port: 995, Secure(SSL): Yes, Socket
Error: 10060, Error Number: 0x800CCC0E
I get this message when sending email. The connection to the server has failed. Subject '', Account: 'mail.comcast.net', Server: 'smtp.comcast.net', Protocol: SMTP, Port: 25, Secure(SSL): No, Socket Error: 10060, Error Number: 0x800CCC0E
View 8 Replies View Related