on outlook 2003, when opening a first email in the morning the properties box for that email pops up on the screen. Is there any setting causing that thing? does anyone know that setting?
View 5 RepliesI just got on my computer about 30mins ago and unplug'd my US Cellular usb port Modem from my desktop and a blue screen pops up and then it restarts. I couldnt tell what was said on the blue screen though because it happend so fast. Anyways heres what pop'd up in a messege when logd into my user (Admin).
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.0.6002.2.2.0.768.3
Locale ID: 1033
Additional information about the problem:
BCCode: 50
BCP1: FFFFFA8006CA4008
BCP2: 0000000000000001....
Ever since I switched to Windows Vista Enterprise Edition 32 Bit I have been having some problems with my dual-monitor set up. My computer is a Fujitsu Tablet PC and is about 2 years old, and my external monitor is a Samsung SyncMaster941BW. For some reason once I go and use the intel display options and set up the extended desktop everything appears to be fine. However when the Windows Vista security screen pops up asking for you permission for a specified action it gets rid of my extended desktop and just kicks everything back to only my laptops display. This also happens when restarting the computer and doing "Ctrl + alt + delete" to open the task manager. It is extremely frustrating and I was wondering if anyone else had this problem? I am not sure if it is just a problem with vista or if I need a new driver since updating from xp, even though my computer says it is the latest driver for the monitor.
View 4 Replies View RelatedI just got a new laptop with vista a few months ago. Everything ran smoothly until recently when I went to turn it on and got an error message that???s repeated ever since. It shows the black 'vista' page, the screen turns black, and after a while a box pops up reading; 'window error recovery' A recent hardware or software change might be the cause. It suggests I launch startup Repair. However when I do so it says "startup repair cannot repair this computer automatically."
I've tried going into system recovery options and using system restore to a date when it was working correctly, but it seemed to have no effect. I haven???t changed any hardware or software recently, and the only thing plugged into it was the power cord. I'm afraid I'm not very tech savvy, but I don't want to give up on a brand
new computer!
i have windows mail and highspeed internet when i open my mail the dial up box pops up and i dont have dial up.
View 7 Replies View RelatedLike so many others I'm asked to verify logon acct. I put in my username and password and this pops up.
Account: 'mail.comcast.net', Server: 'mail.comcast.net', Protocol: POP3, Server Response: '-ERR invalid username/password', Port: 110, Secure(SSL): No, Server Error: 0x800CCC90, Error Number: 0x800CCC92
New touch screen, and, of coursel, wanted to establish my e-mail. Put in the wrong info. Now I need to change it. How do I do it?
View 4 Replies View RelatedIs there some mystical hidden setting or parameter in Vista that randomly pops my DVD drive open for no apparent reason?
View 8 Replies View RelatedHaving disabled indexing, I would now like to disable the message bar that pops in every time I use advanced search. The one that says, "Your searches might be slow because the index is not running. Click to turn on the index..." Is it possible? No big deal, but it would be nice to get rid of it.
View 7 Replies View RelatedI am only operating Windows Firewall on my comp. I believe. I have the game World of Warcraft installed, when it downloads the updates for it it says 'your computer appears to be behind a firewall' which prevents it from installing all the way completely. I have disabled Windows Firewall but it still pops up. Is there anything that I can do to fix this so that that error messsage doesnt pop up anymore.
View 7 Replies View RelatedI like to keep my games in good condition, so I usually make an image and use Daemon to play. However, when I try to overwrite with a no-cd Patch a box pops up saying I need Permission.I have taken ownership, tried it as the 'HIDDEN ADMIN', etc; but all to no avail.can anyone think of anything? It's the only problem I have had with Vista x 64
View 5 Replies View RelatedI have a legit copy of CS4 Premiere Pro because several people have asked me that and not given me answers. Problem is that I click on the setup.exe icon and the "A Program Needs Your Permission to Continue" box pops up, I say 'continue' and the box goes away. From that point on, nothing happens AT ALL. Just that box, and that is it!
View 4 Replies View RelatedSince I installed the Google Chrome this warning message pops up whenever I start the Firefox,could someone please tell me how to remove this.
View 4 Replies View RelatedIn Windows Vista, when right-click the drive, Properties, the "Explore' and "Open" show "????(X)" and "??(O)" repectively.
View 7 Replies View Relatedi was using a tweak guide to help speed up my computer running Vista Ultimate 64bit. I must have unchecked a box that turns off the display of picture properties as you hover the pointer over the picture. I don't even remember what it is called anymore so it makes it hard to find out where i must have unchecked it at. If anyone knows where in my OS i could find this and get it back i would truly appreciate it. Didn't think i would miss it, but i do.
View 3 Replies View RelatedI had my nice sleek black color scheme for aero..I turn it on and now it's the blueish gray..I have a black task bar, where all my programs are displayed, but every program that pops up has a bluish grey trim... I don't get it. And when I go to personalize > windows color and appearance. I don't have the normal palette for colors, I have the theme chooser like they did for XP.
View 8 Replies View Relatedhow to stop a baloon that pops up when I use firefox browser. The baloon pops up and it reads the site that I was on about 5 or 6 pages ago. I do not want to go back to that site but no matter what I try to do the baloon keeps popping up.As an example; I go to gamesville.com and then leave that site and go surfing for several minutes but everytime I move the mouse that annoying baloon pops up and reads gamesville.com even though I have been to at least four or five sites after that.
View 6 Replies View RelatedI have a question. The information tag that pops up when you mouse over an item in windows quickly disappears when you first directly mouse over the file or folder and will reappear for as long as you want it to if you point near the bottom of the selected item. Is this a normal thing or a bug in Vista? Has anyone else ever noticed this? Sorry for the explanation, I don't know of any other way to put it. Is there a Tutorial for this?
View 4 Replies View Relatedwhen I try and move files between folders, or delete files from trashcan or even within file folders. The delete icons pops up but takes forever to complete and never goes away, yet the files transfer or delete within a few seconds just like they should. The only way I could get rid of them without a restart was to start task manager and remoeve them that way, and even that took a while. Attached is a screenshot of about 10 icons that were not closing. It seemed as if they would stay their forever if you would let them.
View 2 Replies View RelatedWhen I display the properties of Drive C: it reports 59.1 gb. I just did a full backup of drive C: (non-compressed) and it reports: Folders Created: 17173; Files Copied: 143024 (26949973990 bytes) A command window DIR /s command reports:
Total Files Listed:
143602 File(s) 27,910,122,018 bytes
50788 Dir(s) 177,102,209,024 bytes free
A command window DIR /ah /s command reports:
Total Files Listed:
610 File(s) 4,401,421,364 bytes
354 Dir(s) 177,102,209,024 bytes free
The total of the two above is about 30 gb Where is the other approx 33 gb?
I wanted to copy my Favorites to a flash drive to put on another computer. Some of the files showed a message saying: Property Loss. The File has properties that cannot be copied to the new location. Are you sure you want to copy the file without its properties? It gave me the choices = Yes, Skip, Cancel.
View 5 Replies View RelatedI just noticed that everything under the HP printer's properties is grayed out and so I cannot change anything. I thought ownership/privileges could be the cause of my not being able to print from this test VISTA machine over my LAN to the HP AIO printer which is connected directly via USB on my XP machine. But I can't change anything - I notice other things (e.g. share name) are grayed out also preventing change. At the very least I want to be able to regain control of all this. Remember - I can print in reverse over my LAN (using another printer). That is, from my XP machine to the EPSON printer connected to this test VISTA machine. I seem to be able to access and change files/folders at will from each machine to the other - so I feel I must have my LAN set up at least nearly correctly. Yes, I have turned User Account Control off.
View 4 Replies View RelatedI'm connecting two PCs one of which is connected to the inet through a USB ADSL modem and both are connected through an Ethernet switch, the properties of the LAN Card connection on the first PC (which is running Windows Vista) has No Sharing Tap for sharing the internet to apply ICS (Internet Connection Sharing).
View 4 Replies View RelatedI am trying to delete files from my Sansa Express which I use as an external USB drive. When I try to delete at the folder level, Vista tells me the "storage is write-protected" and that I should remove write-protection and try again. I am able to delete the files individually, however, with no problem at all. When I go to Properties, the folders are read-only. The individual files are not read-only, and they delete fine individually. The problem is only encountered when I select a folder and try to delete it. I can not disable read-only from Properties, because it is grayed out. It may or may not be relevant that most of these folders were loaded onto the drive from my other computer, which runs XP. However, not all those folders are running into this problem: only the ones which say "read-only" in Properties.
Things I've already tried: There is no write-protection switch on the device. There is a hold switch, and that is definitely in the off position. So a switch is not the issue here. I've gone through the lengthy and confusing process of taking ownership of files before, but there is no way to do that here. The only tab in the Properties screen is "General" and there's nothing in there I can click on or change. I've also tried running Windows Explorer as Administrator, but that doesn't help either. Formatting the drive is not a practical solution for me, because I can't just format it every time I encounter this problem.
I'm trying to export messages so I can import to another computer. Everytime I select an external drive (USB, HD, etc) I get an export error indicating the drive may be full or sometihng is wrong with the files. If I export to same PC, it works but when I try to copy and paste on external USB/HD I am asked if I want to go ahead when all properties are not transferrable. When I go ahead and import messages on othr PC, I get mail entries in the various boxes but no mail info.
View 4 Replies View Relatedwhen i try to send email, a quick flash appears on the screen (like the action occurred successfully, very fast), but the message just goes to the outbox and is never sent, even upon prompt at program termination. i have checked all program and account settings, and everything is ok (especially the send messages immediately checkbox). i entered a secondary unrelated email address with different, known server addresses but the same thing occurred. i downloaded mozilla thunderbird and entered the primary email information and i could send messages with no problem. switching email programs permanately really is not a viable option at this point. this is not a server address problem, and the primary email does not require authentication.
View 9 Replies View Relatedeverytime i press the send and recieve button it has a pop up saying enter user name and password. I have never done this before and i have played around in the setting for 2 days now trying to set up another email account but i later deleted it and now with this original account i can send but recieve emails i have gone it to propertys and messed around with the passwords by deleting them and reseting them but nothing is working.
this is the msg that comes up after my logon details are incorrect:
Account: 'mail.three.com.au', Server: 'mail.three.com.au', Protocol: POP3,
Server Response: '-ERR Message Server said: Invalid login', Port: 110,
Secure(SSL): No, Server Error: 0x800CCC90, Error Number: 0x800CCC92
I'm running Windows Vista Home Premium & connected via broadband with tiscali. Windows Mail randomly pops up the dial-up conection box but I can't get rid of this. I just click on the 'x' at top right and it goes, only to reappear at some random time. It's not a problem as such, just irritating.
View 5 Replies View RelatedHow do I get rid of the talking lady and her keyboard that pops up at startup? I am a new Vista user and I can't find it in any setting.
View 6 Replies View RelatedWhenever i access my documents or pictures a message pops up saying system error! Attention, Dylan! Some dangerous trogan horses detected in your system. Windows Vista (TM) Home Premium files corrupted. This may lead to the destruction of important files in C:Windows. Download protection software now!
Click OK to download the antispyware. (Recommended)
| Yes | | No |...................................
My computer locked and i had to push the on/off button to release. I did a restart which took a long time. Everything is working ok now, but the 'volume, power, and network' icons on the bottom right of my screen have disappeared and will not turn back on. I go to properties (right click on the lower bar) and pull up 'task bar and start menu properties.' The 3 icons i want on are listed but greyed out on the 'notification' area of that window and will not click on.
How do I get these to turn on?