I made an attempt to add ubuntu the other day, it semi took. When I tried to boot to it today, there was nothing there. But.. There was a screen with many different options on how to boot, repair, diagnose etc.. Tools everyone needs but can't access. I don't really want to re-install ubuntu just to find all those utils. Is there another way to get a boot repair screen with all the different utils on it?
View 6 Replieseach time I boot my Vista PC the system is very slow to establish a connection to the network. How do I go about troubleshooting this problem? I have a SOHO network config. One Vista PC, one W2K3 server on the network. Verizon supplied FIOS router gets me on the internet. The network runs great once it is connected. When I click diagnose and repair on the network icon the result is a "cant repair the problem" answer.
View 4 Replies View RelatedOn 85% of the time I turn the computer on I do not get connected to my ISP. I have Linksys cable modem and a Linksys router. My second computer on the router (an XP) has no problem login on to the system. What I have to do (VISTA machine) each time is do a ???Diagnose and repair???. It quickly wants to get a new IP address and after I continue in about 45 seconds everything is working fine. Doing some research I found what looks like the problem that I have. I have done regedit once before so felt I could at least take a look and see if the article was correct. The help article I found was. Article ID:928233? Windows Vista cannot obtain an IP address from certain routers or from certain non-Microsoft DHCP servers?
I got to the end portion of step 2 Locate and then click the following registry subkey: HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesTcpipParametersInterfaces{GUID} In this registry path, click the (GUID) subkey that corresponds to the network adapter that is connected to the network.? Here is what I found and what I think is the problem. I never get to {GUID}. Instead of {GUID} I get two lines of what looks like garbage {3a539854-6a70-11db-887c-806e6fe6963}, and {BE55FD8E-E60F-48EB-ABE5-63232B0C1F72} How or where do I get the right values to replace the garbage (assuming that is my problem)?
I accidentally put vista into sleep mode. The video was all garbled and it was clear there was an issue. So, I hit the reset button on my tower to stop the mess. My next boot I got the error.
File: Boot/BCD
Status: 0x0000001
Info: An error occurred while attempting to read the boot configuration data. It says to put in the windows installation disk and "click repair your computer." The issue is when booting to the DVD, on the page with the moving green bar and it says Windows Vista under, it hangs. I even left it there for 2 hrs. The HDD LED on my computer is solid the whole time too. All my hard drives are SATA and they are in AHCI which is turned on in the BIOS. Perhaps changing the drives to IDE would help?
Anyways, Id like to get into that repair CD so I can fix my boot sector so I dont have to reformat. This has happened before and Ive had to reformat. Im sick of it, I dont want to reformat Vista again. Incase you didnt already know Im using Vista Ultimate x64.
No problems whatsoever for 6 months until Monday night black screen with blinking cursor. Rebooted. Got the message saying cannot start up normally.. disk may need synchronizing (can't remember the exact wording of any of messages)
1. tried to run chkdsk. hung for HOURS.
2. tried to run repair thingie from vista disk. that says it may take an hour or more but i gave up after 6 hours.
3. tried booting into safe modes. does not boot past crcdisk.sys
4. used vista disc again. said i cannot restore to an earlier point because of disk errors. was able to run cmd prompt. all my files are still on the C: moved some files to external drives without error using the move command............
I have a Dell Dimension E520, which won?t boot to Windows (Vista), and none
of the repair options work:
Startup repair
Reports repair fail due to problem with registry
System Restore
Reports no restore points available
Windows Complete PC Restore
Reports no backups available
Windows Memory Diagnostic Tool
No memory problems
Command Prompt. Can?t think of any appropriate command to use here. So I booted with the system DVD (as one would with XP) but the upgrade option has been greyed out. I don?t want to do a clean install. I want to repair the existing installation.
i'm using Vista Ultimate x64. But i have the bootcd error, The problem is: I can't do startup repair there are no OS listed! I click laod drivers than windows explorer thing comes, but what than? I must choose a Setup Information File or something, I accendentally deleted the Boot/bcd map, i just wan't repair, just no OS listed, i can't find it! (i can see my hard drivers)
View 8 Replies View RelatedI have an Acer Extensa laptop with Windows Vista Home Premium installed. Its been working great for over a year now untill yesterday when all of a sudden it wouldn't boot up properly. It continued to go to start-up repair, but that kept on failing. After trying all other tools, (system restore had no restore points for some odd reason)... I tried safe mode. That did not work. It instead went back to the start-up repair screen. The same warning message popped up everytime it failed "Cannot repair automatically, click finish blah blah blah". When I bought this laptop from Best Buy, I did not recieve any type of Disk for Vista, it was already loaded on there... I would rather not do a clean install.
View 8 Replies View RelatedI start or restart my computer I have to insert my OS disc to repair it because Vista wouldnt boot. Its Vista 64 premium. I have been trying to figure out why and I am at a loss. I uninstalled and removed my tv tuner and driver. I restored it to an earlier point. Is this a common problem?
View 8 Replies View RelatedStart up repair problem signature reads as follows:
Problem Signature:
Problem event name: StartupRepairv2
Problem signature 01: AutoFailover
Problem signature 02: 6.0.6000.16386.6.0.6000.16386.....
When I boot at the Thoshiba screen (options to boot into setup/multiboot) there are green lines going vertically through the screen. It will not boot if that is the case. It then initializes start up repair which gives me the error above. I have tried to restore from earlier points to no avail. I have reinstalled vista from my disks at which point it worked for a minor peroid of time and this started to happen again. Virus? Once In awhile it will boot without the green vertical lines and will start up just fine, but this appears to be random.
My 8 month old (64 bit) Acer laptop will not come up to a menu screen. I turn it on and it goes to Startup Repair screen. It searchs for problems, but then tells me it cant repair computer automatically. I know very little about computers, but after a little research I am sharing the information below in hopes that some kind person can provide insight. Stupidly I had not Backed Up in quite a while and I cant get to a recovery point.......
View 9 Replies View RelatedI have a PC that had XP pro installed 1st. Then I installed Vista using the dual boot option on the vista DVD. Everything went well and it all worked fine. I've been happily using Vista for months now, and I've not used XP for some time. But now I need to use it, and it won't boot up.
It gets as far as the log in screen. But the keyboard and mouse don't work. (they do during boot up as I can use the keyboard to choose the OS). Same thing in safe mode. How can I repair the XP installation (or do a new one from scratch), with out messing up the Vista installation and keeping the dual boot option.
I partitioned a new hard drive and formatted it using my Windows XP Home Ed. SP2 Install CD. I then installed Win XP. I then installed Windows Vista Home Premium 64 bit on the other partition. ( I have two partitions on a single drive, C: and D This has been working great for me for the last 5 months. Today I have a reason to perform a repair install on just the Windows XP partition. I have performed a Win XP repair install successfully in the past using the XP SP2 install CD but never when my system was set up as dual boot. If I perform a repair install using my WinXP install disk to repair the Windows XP installation, will this leave my Vista partition untouched? Will it at all interfere with the system's ability to multi boot? I'm not very concerned about not being able to boot up into Windows XP but it's extremely critical that my system's ability to boot up into Vista is not compromised.
View 6 Replies View RelatedI've been living with random Vista freezes for about 6 months - they are frequent but no more or less so over the months - and they began after I clean installed a Vista Ultimate on a new PC (specs above). The freezes can occur at booting, at the Welcome screen, opening Windows Mail, opening either MS or Firefox browser, during a running video - just about any time doing anything. Oh, and sometimes I get a random reboot for no apparent reason but that happens much less often. Device Manager is no help - usually reporting that the event was "unexpected." How profound!Other symptoms, when rebooting after a freeze, indicate - often as not - that my bios settings have been reset - & a booting screen asks me to choose (1) to reset the bios to default values automatically or (2) to enter and manually reset them. Normally, in the bios.
I manually choose to disable the floppy drive & set booting sequence to A. CD B. Hard drive C. third option requires "disabled' for the latter sequence.So, often as not, after a freeze, I find that my floppy drive and boot sequence settings were reset to the defaults - changing my preferred settings. I use Device Manager to 'disable' two card reader icons and a floppy controller - so the icons show an downward arrow to reflect the settings. Why? Because my new PC came with an internal, defective USB floppy/card reader installed, and, yes, I did try to remove the unit but the desktop tower is very poorly designed & I am not able to access and remove the defective floppy's connection to the motherboar............
A friend found out that I have a Vista computer so he brought me his wife's computer to find out why it is so slow. I have no problems with mine but this Vista Home Basic PC is ungodly slow. Just to open an Explorer window takes over 90 seconds. I scheduled a checkdisk and ran it on the next reboot. I defragged and ran the disk cleanup wizard. I downloaded and reinstalled the ATI video drivers after seeing an eror message about ATI. It is slightly faster but not enough to make any difference to the user. Where do I find the diagnostics, or logs or something that can tell me what is slowing it down so that I can fix it? I couldn't find a diagnostic on the eMachine site. My last option will be to reformat and start over but I'd rather not do that if there is a way to fix it instead. It's an eMachine with only 512 MB RAM, but it did run much faster when new. Intel Pentium 3.0 GHz, 160 GB HDD. Also the wireless card is very slow, but the wired connection is pretty fast for downloading.
View 9 Replies View RelatedI have a networking issue with my home network; I have two Vista HP laptops (both Home Prem.) and I am attempting to connect both of them to the network together through wireless router. From as far as I can tell, they are completely connected for both of them can see each other under the network (Auroraborialis) and both are under the same workgroup (AURA), and one laptop (we'll deem it LAPTOP1 for discussion) can access the other (LAPTOP2), yet vise versa is not so successful (i.e. LAPTOP2 cannot access LAPTOP 1).
It returns with the ever-so-famous '0x80070005: Access is denied'. When attempted to diagnose, it returns with 'Windows did not find any problems with this computer's network connection' and it gives the option to send the issue to Microsoft. I have checked every setting that I could (both have completely identical settings, i.e. network discovery, file sharing and public folder sharing is all turned on) and all should be correct. Our only goal is to access each other's public folders and simply pass files and such back and forth across the network, which I'm assuming should be decently seemless for Vista to do.
Both computers' login aliases have no passwords (didn't really want to deal with them) and I've read that's affected Vista/XP network share compatability, but I wouldn't think it would affect Vista/Vista network share. I've searched the forums and the Microsoft Support sites for any clues, but couldn't find any at all. Is there anything I'm simply overlooking or a setting that's slightly misplaced?
Vista isn't booting on a friends laptop. I'm trying to fix it but have tried everything I can think of. See below
Startup Repair cannot repair automatically (lists the following details)
Problem signature:
Problem Event Name: StartupRepairV2
Problem Signature 01: AutoFailover
Problem Signature 02: 6.0.6001.18000.6.0.6001.18000
Problem Signature 03: 6
Problem Signature 04: 1310740
Problem Signature 05: 0xf4
Problem Signature 06: 0xf4
Problem Signature 07: 0
Problem Signature 08: 2
Problem Signature 09: WrpRepair
Problem Signature 10: 267
OS Version: 6.0.6001.2.1.0.256.1
Local ID: 1033
I went to turn it on this morning, I just had a black screen showing the following words;
Press F2 to run
Press F11 to boot menu
Auto detecting PRI Master Atapai CDROM.
It then went to reboot and select proper boot device or insert boot media in selected boot device and press a key. I went into the BIOS to change the boot order and inserted my Vista home premium 32bit. I then got windows is loading in files. After a short while I got the black start up screen with Microsoft Corporation but after a few seconds it just froze. Moments later it went to a blue screen with white writing part of which said the following; A PROBLEM HAS BEEN DETECTED AND WINDOWS HAS BEEN SHUT DOWN TO PREVENT DAMAGE TI YOUR COMPUTER.
i can no longer boot up my computer as the boot/bcd file is miising or corrupt i found a windows artical on how to fix it and it didnt work ive also tryedd googleing the problem and got many results but none that seem to fit the problem or are helpful what can i do to solve this
View 9 Replies View RelatedI have a Dell Inspiron 530 Desktop and every now and then it won't boot up. I get a black screen with 'Windows Boot Manager' ," Windows failed to start. A recent hardware or software change might be the cause."
File: BootBCD
Status: 0xc000000f
Info: An error occurred while attemping to read the boot config data.
When I boot the PC with the Installation disc, it repairs it and it works until the next time. When I click on the details to see what is to be repaired, this come up:.......
I have windows xp installed right now and I dual booted with vista by re-partitioning my hard drive. After encountering problems with vista I delted the vista partition and resized the xp partition back to it's original size. I am now stuck with the windows vista boot loader which persistantly telling me that the windows vista files are not present etc. etc. Is there any way that I can delted the vista bootloader and go back to using the xp bootloader?
View 8 Replies View RelatedWindows wont start and is asks for the installation disc to fix vista however, my PC did not come with an installation disc, just recovery options (which no longer appear). I've run windows start up repair and get the following message:
Startup repair cannot repair this computer automatically
Problem event name: Startup repair v2
Problem signature 01: External Media
Problem signature 02: 6.0.6000.16386.6.0.6000.16386
Problem signature 03: 0
Problem signature 04: 65537
Problem signature 05: unknown
Problem signature 06: FailureDuringSetup
Problem signature 07: 0
Problem signature 08: 0
Problem signature 09: unknown
Problem signature 10: 1168
OS Version: 6.0.6000.2.0.0.256.1
Locale ID: 1033
Hi, i am trying to use the startup repair function booting from my vista disc. I have set it in BIOS so that it boots from the cd/dvd drive first. I put the disc in and restart and when it comes up saying boot from cd/dvd press any key i do so. The problem is everytime i do that my pc just starts up normally and doesn't load the vista disc so i cannot get on the options and run startup repair.
View 9 Replies View RelatedI have an HP notebook with Vista Home Premium and after running SFC I have a few corrupted files.
Question is there a way to bring in the original files when the OEM didn't send an install DVD or will offer one at all?
All I have is the recovery partition with the option to "repair to original factory condition" which from what I gather means erasing all my settings and personal files.
I have made a recovery disc (from the partition) and I have the "Anytime Upgrade DVD," and I'm curious is there any way to access the upgrade DVD to get to those files or even do a real repair of Vista without losing settings and personal files?
I installed a new registry cleaner, RegCure I think, ran it, cleaned like 12k errors, more than I thought I should have, turned off my computer and went to bed. I come back and its acting like windows 2000!
None of the services are working, I can't access the backups I made, and I can't use the system restore because the host program wont respond, or something I ran safe mode and got SOME of the drivers working again, as I thought I would, so it sort of seems my computer has amnesia Does anyone know how I can get more services to work without
reformatting my computer?
Hello, my son's pc crashed and will only boot to the black screen with green loading bar, then quits. Monitor keeps going to sleep.
I tried everything: system repair (which says it can't do - corrupt registry). Restore (can't - no restore point was set.) Go back to last known good config - won't work it crashes.
I ran a memory test and all was good.
So, I saw on this site where it was advised to do an upgrade/repair, but I can't because the option is grayed out and disabled. I tried starting with the disc in, and also by starting and then putting the disk in. If I wait until the machine starts and put the disk in, it will not work. It crashes. If I put the disk in and then start the machine is when I get to the install screen and eventually the 'update is disabled' screen.
I'm really trying to avoid a new install. I wonder if there is a way to get around the disabled thing in my case?
I have a Hp Pavilion notebook with Vista Home Premium. The PC boots fine, but when I log in to the user account with the password the screen turns all white.
I also tried in safe mode and in safe mode as soon as I put in the password in the screen turns all black. It says "safe mode" in the corners and the top of the screen says:
"Microsoft® Windows® (Build 6001:Service Pack1)"
You can move the mouse pointer around but there is nothing to click on and the screen remains black.
I came across this forum and I followed the instructions in the tutorials on fixing Vista.
First I tried How to Do a Startup Repair in Vista and it said it was unsuccessful.
Next, I followed the directions from "How to Do a System Restore in Vista" and it said " no restore point have been created on this computer's system disk"
Now I am trying "How To Perform a Repair Installation For Vista"
but when I get to "step 10. Click on the Upgrade option" the upgrade option is greyed out.
Why am I not given the "upgrade option" and what should I do now?
In wanting to do a repair install (keeping existing programs etc), on running Recovery CD, I get the message.
"Upgrade has been disabled vand cannot be started. To upgrade, cancel the installation and then choose to upgrade to a version of windows that is more recent than the versiopn you are currently running"
I'm running Vista Home Premium (fully updated) but suspecting that I may have a problem, I thought I could do a repair install but it seems all I can do is either a clean install and thus lose everything or upgrade to I assume Business or Ultimate Editions of Vista. Why can't I do a repair install from Vista Recovery CD?
I originally sought help for a problem with a hotfix, KB978251, which my machine would not accept. Over in the Updates thread, here, kb978251 cannot install: why? Flavius was gracious enough to respond. After running the diagnostics and posting the results he'd requested, the end result seems to be that my installation of Vista is corrupted.
His advice was to reinstall vista or upgrade to Windows 7. I am loathe to accept either course of action. The reinstall directions by Brink, here, Repair Install For Vista states explicity,
IF YOU HAVE THE VISTA SP2 INSTALLED: This will not work if you have SP1 and SP2 installed unless your Vista installation DVD includes SP2. I, of course, have SP2 installed. My Vista installation DVD did NOT include SP2; I patched my install to SP1, then later, to SP2.
To confirm, is it impossible to repair Vista if SP2 is installed and my DVD did NOT contain SP2?
Without reformatting my computer and starting from scratch, a course of action which seems quite drastic and perhaps not what Microsoft designed their OS to be known for, how can I repair my Vista installation?
My sfc files are attached. My understanding is that I have a lot of corrupt files. I am willing to replace them, but I need more information to interpret the results of the sfc output.
I have been trying for ever to do an upgrade install, vista home premium 64 over vista home premium 64 to solve some WU problems but haven’t had any luck. I have no service packs installed, and are trying to upgrade from a non service pack vista disk. It seems to skip asking me if I want to upgrade at all. It goes like this
Insert vista DVD
Click install now
Product key screen (i don't put it in right now)
Choose version (home premium 64)
Agree to license
>>This is where it gets different<<
It asks to select partition (I dual boot xp)
After I choose the partition that contains my vista installation it gives me a warning that files may already be there and they will be moved to windows.old I went ahead and agreed once and it went to the screen that said copying files 0%... at which point I clicked cancel. I was afraid to leave it to see if it would..............
I'm currently having a problem with my bosses PC. It will not boot into Vista. I have booted into safe mode and tried to rool it back to a restore point. This has not helped. I have also tried using Startup Repair on the Vista DVD which fails.....
View 6 Replies View Related