I have an HP z6000 laptop with a wireless connection to my home network. I have a Netgear Wireless Firewall Router, Model - WGT624 v3. I have two desktops that are hard wired to the Router. All settings for the Wireless laptop are correct. The problem is that when the laptop is not in use, which can be several days at a time, the wireless connection is lost, and it is almost impossible to restore the connection. I periodically backup the laptop to my external hard drive over the network, backup specific files from the one desktop to the laptop over the network, and need to have access to files on the other desktop via the network. I also need to work on the laptop in other areas of the house, so I need the wireless capability.
This has been going on for several months, and is something that is recent, having been using the laptop wireless with the same hardware for more than 2 years. Once the connection is finally made, it does ok, until the next time I have to shut it down for a few days, and then the connection is lost again. It would not be so bad, but, getting it to reconnect can take hours, if not days. I have it set to automatically detect, so not sure what is not working now
I am having the worst problems connecting using a cable connection, which I need because as I am in Europe at the moment, many sites or private homes are not equipped with wireless. Now, when I connect with cable, everything seems to be working fine, the Toshiba connectivity doctor tells me I am connected, the diagnose program assures me that the problem has been resolved etc. etc. and yet whenever I try to connect (IE, Mozilla, Google, I have tried them all), I get an error screen. I have tried everything I could think of, checking my settings etc. Nothing works.
Let me emphasize that: 1) wireless connection works fine 2) it is a problem with my computer, not the host, since I have encountered the same problem everywhere (libraries with password protected access, private homes without password protected access etc.).
With Vista, I can get internet for my new Dell XPS laptop over the wireless connection without doing anything other than selecting the connection. No user name or password is needed. But to plug in directly into my cable modem, it does not work. Seems to require user name and password. But I use Verizon and a Motorola SB5101 modem and while it is broadband, I did not think it is pppoe. I don't even know of any user name or password for my account. Am I wrong, is all broadband pppoe? My internet connection works just fine without asking for pppoe login info when I use my desktop with Windows XP. So, it seems to Vista specific problem.
Running Vista and can no longer open my Maxtor III external hard drive. It appears as working properly in device manager. My Computer does not show 'G' or 'P' drives any more - the 'G'used to be pick up the USB connection.
I'm running Vista Home Premium 64 OEM on a Q6600+4gb ram+Asus P5N-E SLI. My favourite browser is Firefox and I installed version 2.0.0.4 and it runs fine. However I got prompted to upgrade to version 2.0.0.6 and when I did I lost my broadband connection completely. I've tried it several times and the same thing happens every time. Obviously I have disabled the update prompt and am running version 2.0.0.4 but I was wondering if anyone else has had this problem and if there is a way round it. I've tried to get onto mozillas forums but it keeps telling me I have typed in the fuzzy letter test thingy wrongly! Once again I've tried several times and been extra careful but they still won't let me register.
I am writing now from a different computer. My computer lost connection to the internet. It was working yesterday. I tried to restore to restore point but vista won't allow me. It says "Restoration Incomplete. Your computer cannot be restored."
I just installed Vista SP1 today & after installing I lost not only network connection but I dont even see my network card in the Divise Manager. I am at loss right now. I am running Vista Ultimate.
In error, I unistalled Remote Desktop Connection when I was having EXTREME problems with VPN. Now I can't reinstall it. I found a link at MS, Remote Desktop Connection (Terminal Services Client 6.0) for Windows XP (KB925876), but when I try to run or save it, I get an error message "Not enough storage is available to process this command." I then saved the program to my desktop which it readily accepted, but it wont let me run it.
I lost connection thinking it was the laptop i tried switching off the wireless card and deleting teh settings however it did not help. I only realised i had just lost connection completely. Now every time i connect i get unidentified ntework limited connectivity.
I use Window Vista. I have no problem connecting to the internet if I use a normal cable but when I use my wireless LAN AP, my PC can detect the wireless router with no problem at all but then my PC could not connect to the Internet (the Earth). My wireless router is a IEEE 802.11 LAN. I believe this is related to some codes or something that I should enter?
3. The Windows Firewall service is not running. When try to turn on get prompt: "Windows Firewall settings cannot be displayed because the associated service is not Running. When try to restart Windows Firewall sevice: "Wimdows cannot starts the Windows Firewall service. Same in the Safe mode and from Adnministrative Tools. Also failed to load Windows Firewall with Advanced Security snap-in. Error code: 0x6D9. When try to use systen restore: "System Restore does not appear to be functioning correctly on this system. The volume Shadow copy service used by Systen Restore is not working."
4. When I tried to shrimk files for Vista reinstallation, in Computer Managenemt / Storage: "Unable to connect to Virtual Disk Service" and this all happend at once, after i was trying IObit Security Scanning option "Network security" Is anything possible and what and in what order I have to try to do?
Recently when using Skype, my microphone is very scratchy when I am on wireless. I thought that it was the microphone. However, if I am on a hard wired connection, the microphone is fine. Also an external microphone works fine even when I am on the same wireless connection. I am in China, need to talk with family. I have a Toshiba Satellite laptop. My wife has the same computer and hers works fine on wireless. So I don’t feel that it is the wireless connection.
My wireless is not turning on so that I can connect to my home wireless network. The wireless is set to "on" on the switch on my computer. When I reset my computer, the light turns on as if the wireless is working. As vista starts up, the light and wireless connection remain active, but as soon as vista is done starting up, the light indicating my wireless radio is on turns off and I can't connect to any wireless network.
Does this make sense? other computers in the house are connecting fine to the wireless but my computer is dropping it before i can even connect.
My son's got a Vista laptop running off a wireless Linksys router. It's been running great for almost 2 years but for some reason his wireless connection recently went from `secured' to `unsecured'. Have no idea what caused this change. Nothing was done to the router. Can anyone tell me how to re-secure his current wireless connection? Perhaps there are some MS sites out there that can provide step by step directions.
I cannot connect to my wireless network after reintsalling Vista on my notebook. I hvae an HP dv6139us notebook. I can see the newtork and I can try to connect but everytime I try to, it does not connect for an unknown reason. I have a secure network and i put the correct passphrase in as all my other computers connect with no problems. I have also dover a little deeper into this and when you look and the nwetwork and sharing center and click view full map, under the drop down menu there is an error message that states, network adapter is not enabled. How do i enbale the adatper? As I have checked this in the device manager and it shows that this is enabled. I am totally confused and lost and about to pull my hair out.
Have installed vista over xp everything fine except my wireless connection press switch but have been told software update or driver needed for acer aspire 1690 anyone know where I can look? my belkin adaptor allows me to connect fine.
Vista HP 32bit....When I power on my laptop after not using the Power off.....so its coming out of Sleep....and you see RESUMING WINDOWS.....9 out of 10 times I won't get connected to my Router. I have used the Diagnostic Tool...and get the same results, which is, power off the Router...and power it back on...and when I do that, I do get re-connected.
I've been having this issue ever since I bought my new tablet pc. I am connected wirelessly to a network here at work. I've never had an issue with any other computer before until this one. I'm using a Vista 64 ultimate and this is my issue. I connect to the wireless network... I can browse the internet just fine. I have a shortcut on my desktop \192.168.1.200location Once I click on that it ask me for my user id and password so I enter and I then get to the network folder. After a few seconds it says Not Responding and I can no longer connect to the network or the internet although I can ping all internet addresses just fine. Disconnecting from the wireless and reconneting does not work... Disabling and reenabling doesn't work either. I have to shut down the pc and restart for it to come back up.
I have a Compaq Presario f730US. I run Vista 32bit. When I got the computer back the next day, I could no longer get wireless. The Wireless button on the front won't turn blue. I have tried installing the drivers. I can use the ethernet but I got a laptop so I woulldn't be on a leash.
I have been on the phone collectively for 6 hours with AT&T as well as had a technician out here to look at this problem. I have a new wireless router box. The whole At&T system went down briefly (tvs and all). When it booted back up my computer wouldn't recognize the wireless network. After getting a new box, it will now recognize the wireless network in my home. It says I am connected to the network with excellent strength but I still cannot get online. My desktop works fine and I plugged the ethernet cable into my computer and it still won't get online being hardwired to the router. My firewalls are turned off. I have run an ipconfig with the following message:...................
I bought a Netgear wireless router today so I can hook up multiple computers in my home. Problem is that when I hook everything according to the -schematics it does not go as planned. I have a verizon dsl modem and before I hook up my router everything works (internet). But when I connect my router I cannot get a connection at all. Also after I disconnected the router and connect just the dsl modem the way it was before I cannot get a connection either. I tried reseting the dsl box and I unhooked all the phone cords and ethernet cords and restarted the computer and it is still a no go. I am so confused I cannot understand it.
I recently got a new computer that came with Windows Vista 64-bit Home Premium edition, I have a DSL connection downstairs plugged into a router,I connect to the router from my room upstairs via wireless, I'm using a Linksys wusb54g wireless router which plugs into my usb port,It connects just fine with a good signal but when I'm trying to play a game (Diablo II) it constantly skips every 60 seconds (my connection to the game freezes for 10 seconds then goes back to normal) when its not skipping my game ping is very good (31 ping),it never did this on my previous computer (which was old and slow) my wireless settings (picture)
all of a sudden my wireless connection stopped working, so i did a system restore and it started working again, then it made the updates, and it stopped working again, the system restore worked twice and then after the updates, not working again, this time more permanent, when the computer starts it tells me that the bluetooth is on, but no existence of the wlan, the driver doesn't even show up on the device manager.
Then after some time my computer became stuck it didn't respond (this due to a different issue) so I decided to force the computer to turn off, when it restarted i had a wireless conection, then I turned off the computer and when I turned it back on no internet again, then I decided to try the force turn off again, and again I had internet. also if i have the internet working and i close my computer the internet stops working as well
I am using Vista and wireless E180 USB Modem connection from 3. For a long time i has been working fine, but now i cant connect to the internet. I gives me the message - command line option syntax error type command/?
I am running Vista SP1. When I turn on the computer with an ethernet cable attached and a wireless connection available, Vista will connect both the wired and wireless connections. This leads to a conflict and networking will not work until I turn off one of the connections. I then need to manually turn off the wireless, at which point the wired connections works. This did not happen on this computer when I ran XP.
I thought this might just be an idiosyncricy of this computer since I have not seen any discussion about the problem but I got ths same thing happening when trying to troubleshoot another laptop.
I purchased WRT54G Linksys wirless adapter & WRT54G Linksys Router about 8-10 months ago. Router wired to my desktop pc running Windows XP & my wireless connection running Vista Basic on a desktop in another room..Everything has worked fine until about 3 days ago when I keep going in & out of internet connection on the wireless pc. Updated drivers from Linksys and was on the phone with them for 3 hrs. yesterday. They got my connection back up, but only for 15 mins. or so before losing my connection repeatedly. These are my current issues:
1. I have always had full signal streghth on the wireless pc. 2. I am connected to the network. 3. It says I'm connected to the internet but I can't surf the web. 4. Internet connection keeps turning on/off (Globe then no globe) 5. There are no issues at all with the pc with the router attached. 6. When diagnose and repair it says nothing wrong with my connection or sometimes check with my internet provider. (Internet on main pc working fine). 7. It's random but I have been able to browse a couple pages here & there, sometimes for a full hour. 8. Windows Update says there's been an update for my wireless adapter for months but I always get an Update Failed message. My pc has worked fine for all this time without it. There have been no changes to either pc. I don't know why I'm having issues now.
I use a 3Com 3CWRDR100A-72 router that has worked faultlessly with many devices in my house; I use MAC Address filtering for security. However I have a brand new Sony VGN-FZ21Z that will not connect wirelessly to it...well sometimes it has but most of the time it doesn't, I have the router set to broadcast SSID and the FZ21Z sees it OK. With no encryption the FZ21Z will not automatically connect after coming out of standby or being shut down. Using WPA it has managed to connect probably 2 times out of 20 but mostly it fails - the log reporting a timeout error. I have a Sony VAIO VGN-N38Z sat next to it that is fine even when the SSID is not broadcasting.
I Am running a 64x vista os and I've installed a linksys PCI adapter into it. well the problem is that i have connection to the internet, but the connection just keeps identifying, normally i would mind, but recently i've notice that all online games lags (not like once every five minutes, almost constantly). I'm sure that the computer can cut the setting, and my connection is 10/10 mbit so ain't that either.
I have a big problem with my network and the shares. I have 3 laptops, each with Vista Professional. Also I have a WesternDigital mybook world. The laptops connected over wireless, the harddisk is connected over LAN cable. So now my problem: From two of the laptops I could acces the harddisk without any problems. But from the third I always get this error 0x80070035. It's not working with the IP as well as the name. From the 2 working laptops it works with both. I could ping the harddisk form each of the three laptops.
32 bit Windows Vista Home and I have McAfee security. This as my sons laptop and he could not get the OS to start up. I done a system restore have since been able to log in. From that point I have tried to connect to the internet with a netgear wireless router WGR614 v6. I can establish a wireless connection, but I am unable to connect to IE. When trying to do so, I get internet explorer cannont display web page.
When I try diagnose connections I get the host may be down and windows found a problem that cannot be repaired automatically. I am running a pc with xp home through the netgear router with an ethernet cable so I know the internet connection is good. I have tried to connect in safe mode. I have done an ipconfig reset and a dns flush. I disabled my windows firewall and still have no luck.
