Verifying AHCI Mode After Vista 64 Install
Nov 28, 2008my taskbar is messing around and being unresponsive, and very hard to click.
View 4 Replies
ADVERTISEMENT
Compatability Mode Install Vista Hp
Mar 23, 2008Where do I find the compatability mode to install a program on Vista HP >
View 4 Replies View RelatedX64 New Install: Slow Internet Connection In Normal Mode; Fast In Safe Mode
Oct 12, 2009Using my ISP (Roadrunner Carolinas) speed test site; I get around 200 to 400 kbps download speeds using IE in normal mode. If I boot to Safe Mode, I get around 3500 to 4500 kbps, which is what it should be (this is what I used to get in normal mode before I re-installed Vista). Running the same speed test with Firefox, I get around 1500 to 2000 kbps in normal mode, but if I try to download a file it ransfers at only the 200 to 400 kbsp rate (if I'm lucky). Here's more detail about the system and what I've done so far:
Installed all updates including SP2.
Using Windows Firewall, no anti-virus.
Updated network drivers directly from NVidia (Chipset is nForce750i)
Updated graphics card drivers directly from NVidia
Disabled all LAN protocols except for Client for Microsoft Networks and IPv4
Connected via ethernet cable directly to cable modem, no router.
I've deliberately refrained from loading anything but the basics until I can get this sorted out..........
Ahci Controller To IDE
Feb 26, 2010I have the following setup (see below) and would like to add the unallocated space to the C_drive. Is this possible?
View 5 Replies View RelatedAHCI Disable ,not Working.
Jun 11, 2009i hv intel core 2 duo processor, windows vista 32 bit, Ram 2GB, 230GB hard disk, vostro 1500, my problem is BSOD(blue screen of death), my friend told me that go to BIOS and disable AHCI drive with flash cache in onboard device. i do this and system working properly but very slow,and i do every neccessory chkdsk C: /f /r, reinstall window , enhance paging file to 12000MB, etc.etc. but whenever again i enable AHCI it gives me BSOD and give me message which i send u***STOP:0+0000007B
(0+81AO4BAO,
0+C0000034,
0+00000000,
0+00000000) {i hv no cross sign on my keyboard thats y where there is + sign its mean its multiply sign.} when ever i enable AHCI it gives me this message before start..
Installing SP1 Start AHCI Disable
Apr 27, 2008After installing vista service pack 1 on my pc, it started hanging occasionally. This doesn't happen when I disable AHCI in the bios. Anyone any ideas as how I could fix this? (I'm running Vista Ultimate)
View 4 Replies View RelatedUpdate Wont Install ,cant Use Safe Mode
Mar 18, 2009Last week, I was unable to install Microsoft updates. They failed every time. I overcame this by doing a system restore to an earlier date before the previous updates. They then installed. However I was left with Microsoft Net framework 3.5 Service pack 1 which failed to install. I went to Microsoft download site and downloaded from there. The my troubles started, in that now on opening my machine it tries to configure these updates and says on screen "configuring 3 of 3" gets to 87% then closes automatically and restarts the process overagain. I tried to open in "safemode" but exactly the same thing happens. Is there anything I can do to stop this, or am I forced in to doing a restore to factory settings, or I note that I have another option of "last known good configuration (advanced)". As I am not advanced this causes me concern.
View 6 Replies View RelatedWin95 Install Hangs In Compatibility Mode
Jun 21, 2008I'm trying to install Mario Teaches Typing 2 (Yes, from the Win 95 days) on my Vista Windows Home Premium system using Compatibilty Mode. It starts installing okay, but then it hangs with this error message:
Problem signature:
Problem Event Name: AppHangXProcB1
Application Name: ntvdm.exe
Application Version: 6.0.6000.16386
Application Timestamp: 4549adf0
Hang Signature: 3fda
Hang Type: 32
Waiting on Application Name: hpqste08.exe
Waiting on Application Version: 82.0.173.0
OS Version: 6.0.6000.2.0.0.768.3
Locale ID: 1033
Additional Hang Signature 1: f98fcc1eb065216f2118c4433ce642fc
Additional Hang Signature 2: 39ee
Additional Hang Signature 3: 38d04008f00861830867acb48460f00e
Additional Hang Signature 4: 3fda
Additional Hang Signature 5: f98fcc1eb065216f2118c4433ce642fc
Additional Hang Signature 6: 39ee
Additional Hang Signature 7: 38d04008f00861830867acb48460f00e
I was told that this software would work on Vista in compatibility mode before I bought it for my kids.
Difficult Issue: Audio In Safe Mode: How To Manually Install If Possible
Jun 29, 2009Vista Home premium, SP2. HP Pavilion Notebook. Have to run in -SAFE mode with networking- for next week till new hard drive arrives.
I will then install it as my computer will not boot in normal mode. HP Warranty is replacing hard drive.
But as an aside, I can access my hard drive and copy files to my external HDD.
In the meantime, I wish to use the Internet to access audio via HULU or other sites.
How can I manually access my audio while in safe mode?
VISTA OEM Install: Install Of Vista Instead Of Using The Recovery Disks
Feb 28, 2009I have hp laptop with Vista Home Premium (OEM) installed. I've made Recovery Disks using the Recover Manager. I wish to have a clean install of Vista instead of using the Recovery Disks. I've read previous threads but I have to say I am only getting more confused.
- Can I perform clean install of my Vista OEM?
- Can I use any copy of Vista OEM cd and use the Product Key sticked behind my laptop?.........
Check The Memory For Errors BEFORE I Load/install Windows Vista Home Premium X64 To Avoid Install Hang-ups
May 25, 2008I would like to check the memory for errors BEFORE I load/install Windows Vista Home Premium x64 to avoid install hang-ups. Can you make an ISO CD of this program, load it in your CD/DVD drive and check your memory for errors? I recently updated the BIOS on the board (DP35DP) and it does show all of the 4GB of Kingston ValueRam PC800 1.8v (2x2gb) installed. I have good reason to believe that it's from a respectable manufacturer. Just want to make sure the memory is good before I load up the OS.
View 9 Replies View RelatedVista Won't Boot In Any Mode Safe
Nov 15, 2009I have beed having problems with stability with my vista x64 system. After crashing several times from video driver problems (Nvidia 9800GT) Vista won't boot in any mode safe, restore to last known,etc. I put in the original disk I purchased and I get Status: 0xc0000225 Info: An unexpected error has occured. I can not even get to the repair screen or even put on a clean install. The x32 disc will boot but has no x64 repair tools. What do I do?
View 9 Replies View RelatedVista License In A Rather Peculiar Mode,
May 3, 2009I have acquired my Vista license in a rather peculiar mode, I will describe it so bear with me (there's a question at the end): I had been looking for a Vista license for a while but most IT shops didn't have any types on stock until I reached three webshops which were offering Vista Home Premium (both x32 and x64, the type that I now run). All of them were advertised on site only with the simple name at a price around 100 and something USD (about 130 I would guess with currency conversion).
I called all three asking for an update quote mentioning my interest in a purchase. Two called me back confirming the price but saying the license there was OEM, therefore it can't be sold like that, only with a system purchased from them, either on the spot or purchased from them less than three months ago. I had no idea what OEM means at the time. The third one however accepted my order and shipped a Vista package, which contained a brief OEM manual, a sticker and the original DVD (with all those cute colorful Microsoft holograms). Of course the package was legit, I put the sticker on my PC, installed it, passed genuine validation & everything. But I still wonder, since this package is obviously OEM and I didn't get my computer from that company anyway, is there a chance I could get in trouble for that? OR maybe the company who sold me the license will get in trouble?
Vista 64bit Sleep Mode
Mar 23, 2008I have both Vista 64 Home Premium and Vista 64 Ultimate )on two exactly the same Asus computers. After I have put the computers into the sleep mode they immediately restart.::
View 4 Replies View RelatedVista Does NOT Start The VNC Server (service) Mode.
Aug 5, 2007I just built a Vista Ultimate x64 box, after a lot of effort I finally have most of my old Win2K Pro applications workings except for Real VNC. I have three machines in the work group, unfortunately one is Win2K Pro, XP Home and now the Vista x64. I think due to the Vista firewall or something else it will NOT let other machines access the Vista box, but I can access the other machines just fine from the Vista box. The work group seems to work fine. I am able to see/edit files on each computer Hdd.
The main problem as I have narrowed it down to, is that Vista box does NOT start in the VNC Server (service) mode. And I dont know how to get it to start. When I goto Start>Real VNC>Start VNC Server Service. It says the service is already running but I don't see the icon with the IP address in the task bar.
Vista Corrupted Start In Safe Mode
Jul 21, 2009I have Vista Home Premium 32bit. Vista became corrupted to the point where I was not even able to start in safe mode. I managed to make a set of backup dvds through the HP backup system just before the computer completely died. Vista Home Premium does not recognize these backup dvds, even though it does show that there are files on each of the dvds. Is there any way to retrieve the information on them?
View 4 Replies View RelatedRouter Shuts Down In Sleep Mode Vista 64
Oct 5, 2009I have our wireless router hooked up to my computer at home. When I shut down my computer, the router stays up and working fine, allowing our wireless laptops access to the internet. The ethernet light stays lit and everything is fine. However, when I put my computer in sleep mode - something I would prefer to do rather than shutting it down when I'm not using it - the ethernet light goes out and the laptops can't connect to the internet. It even says no network connection is available. Does anyone know if there is something I can do? Change a setting in Vista or in the system BIOS ? Is it something to do with the router? The router is pretty old - Actiontec (GT704WG) but we've never had any problems with it. I'm running Vista Home Premium 64 bit on a custom built system with an E8500 @ 4.0 Ghz and 8 megs of RAM Motherboard - Gigabyte GA-X48-DS4
View 2 Replies View RelatedXPS M1530 With Vista Home Premimum Bring Up In Administrator Mode
Mar 23, 2008I have a Dell XPS M1530 with Vista Home Premimum. I have found no way to bring it up in administrator mode. I've tried F8 F11 and no joy.
View 6 Replies View RelatedSwitch Between Entertainment Mode And Game Mode X-fi
Oct 16, 2009How do you switch between game mode and entertainment mode with creative soundblaster x-fi?
View 5 Replies View RelatedHaving Two Copies Of Vista On One Computer: Install Vista On The Smaller Drive, Boot With That, And Access Files On The Other Drive
Dec 25, 2008Right now I have a single 640 gig HDD that everything's on. I've got a laptop too that I'm gonna be taking out on rotations eventually. I wanted to get a new smaller (250GB) HDD and put my Vista on that, so my 640 will be data only (then I could take it with me in an external enclosure and leave the desktop for my mom to use til I come back and collect it). I was gonna DBAN the 640, but I wanted to get the data off of it first- about 170 GB of stuff that I'd rather not lose.
My question is-
Can I install Vista on the smaller drive, boot with that, and access files on the other drive? Would it work if there's another Vista running on the other drive? (both SATA).
How To Turn OFF "Test Mode" In Vista X64 Ultimate
Dec 16, 2007Is there any way to turn off "Test Mode" in Vista x64 Ultimate? Once upon a time I disabled driver signing through bcdedit /set nointegritychecks ON or bcdedit -set loadoptions DDISABLE_INTEGRITY_CHECKS (don't remember anymore). Now I would like to enable it back on, but can't. bcdedit -deletevalue loadoption or bcdedit /set nointegritychecks OFF/NO didn't work. Also atempt to remove only the "test mode" watermark by overwriting user32dll.mui also didn't work. I managed to overwrite the file with changed files in bots system32 and syswow64, but nothing changed.
View 9 Replies View RelatedInstall Sp1 On Vista
Jun 2, 2008Is anyone having any problems after installing sp1 on vista?
View 9 Replies View RelatedI Can't Install Vista 64 Bit
Mar 23, 2008I have Vista Ultimate upgrade. I'm currently running Win 2000. Obviously I can't install Vista 64 bit from this OS so I'm following the instructions here which says you can boot from CD to install Vista 64 however the previous operating system must not be removed prior to install. In my system Win 2k is on a different hard drive than the one I'm installing to. When I start the install process, on the screen where you select the custom option, it says that upgrade is disabled. I assume this means it did not detect my previous OS? I can install my Win 2k on the hard drive where I wish to install Vista. In the past however, when I had the previous OS on the C: drive and I installed
Vista on the same drive Vista would end up on the next available drive letter (i.e. E. Nothing really wrong with this but it's kind of awkward and can't be changed later.
Vista OS Want To Install Dos 6.22
Feb 15, 2010I have vista operating system on my laptop. I want to install DOS 6.22 as well. Can I do that? Or is there any way to run it in my laptop?
View 5 Replies View RelatedCannot Install Vista 64 Bit
May 13, 2008I have Vista Ultimate 64 bit. I install this program (Shipping Assistant) and it will not open (however the previous version worked fine). I get this error:
Description:
Stopped working
Problem signature:
Problem Event Name: CLR20r3
Problem Signature 01: shippingassistant.exe
Problem Signature 02: 3.3.21.0
Problem Signature 03: 48230c97
Problem Signature 04: System.Data.SqlServerCe
Problem Signature 05: 3.5.0.0.............
Vista Install Sp2
Jun 25, 2009I have Vista Ultimate x64bit and trying to install SP2 Standalone onto my Dell latitude E6400 and is telling me to install SP1 first, but SP1 is installed. Did anyone have simular problem, or suggestion on how to solve this issue? besides installing OS with SP2 included. I googled the S_it out of it, but no go.
View 4 Replies View RelatedVista Dvd Will Not Install
Feb 13, 2009when i try to reinstall vista i get this error. i bought and installed a new hdd and want to install vista on it. when i try to boot (turning comp on with vista dvd in drive) with vista dvd i get no boot device found. also when i run f2 setup at boot i don't see my dvd or cdrom.
View 9 Replies View RelatedRe-install Vista Which Was Pre-installed On PC
Oct 8, 2009Can anyone tell me the best and easiest way to re-install Vista which was pre-installed on my PC when purchased. I'd like to re-install because of performance problems. I have the business edition.
View 9 Replies View RelatedDelete Vista And Install Xp Pro Sp3
May 8, 2009I have a compaq presario v6000 notebook with vista preinstalled and i want to delete vista and install xp pro sp3.
View 9 Replies View RelatedUNABLE TO INSTALL VISTA X64
May 14, 2009I am experiencing a whole deal of difficulty running a clean install of vista ultimate x64.
Now upon install it seems to boot fine and get into the initial install setup of keyboard type (US etc...) and the selection of the OS, I select my HDD to install vista on and the installation goes away copying files and extracting files ... then upon the reboot to setup the rest of windows this is where it all goes terribly wrong, i have had several different errors and BSODs examples are below:
0x0000001a
0x00000024
0x00000034
0xc0000005
iqrl_not_less_or_equal
CACHE_MANAGER
BAD_POOL_HEADER
Now i have researched all the errors i have had show up and can define nothing in common with them all, I have removed the X-FI creative sound card, wireless kbd and mouse and gone back to basics, i have checked all my hardware and it IS compatible with x64 but still no luck.
My system consists of:
M/B - PN5-E SLI
PSU - Thermaltake tough power 1100W
CPU - Q6800 quad core
PGU - EN8800GTS x2
ram - 1G x4 kingston ddr2
HDD - WD 500G
i can get no replication of the error it just goes mental on the initial reboot after installing windows, and then reboots over and over, sometimes it gets further and gets back into windows but then i just get told the pc rebooted unexpectedly or the install was interupted to reboot and reinstall, i have tried to repair the half install but still no resolve (the even weirder thing was i tested vista ultimate x86 (32-bit) and all installs fine.
VIsta SP1 Fails To Install
Jun 17, 2009Vista Ultimate - Win SBS R2 Domain member Symantec Anti-virus Corporate edition ISA firewall client. I have 2 vista systems on my small home network. I tried the push update of SP1 and it failed and I tried the downloaded SP1 and it failed with the usual error codes. I wnet through KB947366 and actually got the long install but it failed in pass 3. My other system had no problems and is at SP2. Both vista systems have nearly the same applications and both are domain members.
View 6 Replies View Related