Unable To Scan With Epson NX 415 Printer
Nov 25, 2009
I tried to scan with the Epson NX 415 printer but I get an error saying that it is unbale to communicate with the computer. I installed the latest drivers, and when I was chatting with the Epson tech support, they had me try to scan with Pain, but that too did not work. So they said I had a problem with the Windows Image Acquisition (WIA) service and to contact Microsoft. Not sure what I need to do to get this working. I am able to print fine with the printer. My OS is Windows Vista Home Premium 64-bit
View 5 Replies
ADVERTISEMENT
Jun 24, 2008
All phases of the printer operation run very slowly with all programs. It is a matter of Click and wait for probably over a minute and sometimes longer ? not just a few seconds delay. If this is not the correct place to ask we hope you can link us..........
View 9 Replies
View Related
Jun 15, 2008
I have a Dell PC with XP Home and a Dell A960 Printer attached to it. I also have a new HP Laptop with Vista premium that has also had the same printer attached to it at times so the drivers are installed on HP laptop. I recently installed a router so I can use laptop wirelessly. That works fine. However, I am unable to print to the host printer wirelessly. I get message saying printer cannot communicate with computer. I tried everything I found on Google searches. I have enabled printer sharing on both. Do I have to make the Workgroup names the same and if so do I change the Dell with XP or the HP with Vista? I changed the Dell once to no avail so I changed back. Do computer names have to be same? I am a novice at networking.
View 6 Replies
View Related
Apr 6, 2008
I have Vista Ult. I have thousands of faxes in my Sent Folder that are up to 7 years old, many from XP. Since I have re-installed Vista, I have been unable to get Fax and Scan to view these previous faxes under the Sent Items folder. The new faxes are saving in the same folder as the ones from XP and my previous Vista install. I cannot view any old faxes in the Sent Items folder, I have to go to the Fax folder in my Documents that I have set up as my folder of record in order to view them. I was never able to get Fax and Scan to view the old Faxes from XP even though they appear to be saved in the same cryptic fashion as those saved in Vista.
View 4 Replies
View Related
Oct 6, 2008
As Administrator, I already added one printer and it works fine. As Administrator, when I try to add a second printer I get message: "This operation has been canceled due to restrictions on this computer, please contact administrator."
View 8 Replies
View Related
May 3, 2009
I have a cannon ip2600 printer. It has worked for about 6 months and now I can't print. I have canceled all documents and tried to delete drivers so I can reinstall but vista won't let me. I get a message- Unable to remove ip2600 series x86,type3-user mode driver. The specified printer driver is currently in use.
View 5 Replies
View Related
Apr 2, 2009
I have a real problem. I have an Epson colour stylus 680 that was printing, connected via USB to a laptop using vista. I disconnected the USB cable for a while and now it refuses to print anything. Odd facts:
- The printer is installed again every time I connect the cable, (annoying)
- The PC detects the cable automatically, but still it doesn't print
- The print command is getting sent through, but isn't actually printing
- I have changed the ports various times and deleted printers, reinstalled them, and rebooted, etc, to no avail.
I have called Epson, who said it's better I talk to Microsoft, who then directed me to PCworld/Advent, and still I can't get the thing to work. Last time, the guy at Epson, by trial and error, I think, managed to get it working, but heaven knows how.
View 6 Replies
View Related
Feb 6, 2009
My wife has an Epson Stylus Photo 1280 printer. We installed the driver from Vista the issue she is having is she cannot go into the printing preferences to change the size (change the margins) it will not allow here. She prints true 12x12's and under Vista it will not allow her to change these setting under XP no problems. I was able to set a user defined 12x12 paper size. It is not listed as an option to print through the Windows Photo Gallery. And I can?t print it through my Memory Mixer software, it wants to change the dimensions and then it only prints a little square right in the middle of the page.
View 5 Replies
View Related
Jan 2, 2009
I have an Epson Stylus C64 printer which I am able to use as normal (with ink levels and status monitor appearing) on my old computer with Windows XP.
My new laptop is Vista and although I have installed the Epson Stylus Printer Software that came with the printer onto the laptop, the Ink Indicator Levels and the Epson Status Monitor options showing in 'Printer Prefences' seem to be grayed-out/disabled. I am unable to gauge my ink levels so have no idea how much ink I have available and/or when to replace it. The actual printing seems to be fine at the moment but I am unable to tell when the ink requires replacing.
I have tried to re-install the Epson Printer software but nothing seems to change - the ink levels and status monitor contine to be disabled/grayed out. I noticed that when installing the software I am asked to disable any anti-virus software - I have Norton installed but have no idea how to uninstall it - my computer also seems to be automatically provided with something called McAfee Security - again I am unsure how to disable this and whether in fact I need to do this - it may be that the anti-virus programs are hindering the Epson software from fully loading? Any ideas and/or suggestions would be most welcome.
View 9 Replies
View Related
Mar 23, 2008
I cannot install an Epson Perfection V200 Photo Scanner on my Vista Home Premium equipped PC. Epson technical support personnel have been zero. This is a new model scanner that is supposed to work with Vista. I have used the software disk that came with the scanner, and I have downloaded and used the latest driver from the Epson website. I have installed, uninstalled, and installed both of these numerous times. I always get the same error message......
View 9 Replies
View Related
Jul 29, 2009
I?m trying to install a network printer on a Vista machine. Vista is able to locate the printer on the network but when I select it for installation, for some time, Vista tries to connect and then pops up this message: "Failed Connecting to Printer - Access Denied" And then another window pops up with this message: "Spooler Subsystem Application stopped woring and has been closed." In fact the spooler service always stops, so I have to restart it on the services windows, within Administrative Tools of the Control Panel. The machine is new and has been installed yesterday. Everything else works fine. The printer I am trying to install is on a Windows XP Professional machine within the same network (naturally).
View 9 Replies
View Related
Mar 23, 2008
Dose anyone knows if they make a printer cable: I received a new lab top and it didn't come with the older printer jack on the computer. I guess I need to use one of the usb ports? My Epson 660 still works I hate the idea of getting a new printer when my old one works.
View 4 Replies
View Related
Jun 1, 2009
Just installed Vista SP2. Everything seems to work OK except for my Dell 1720 printer. It now prints an extra page before the actual document to be printed. There are just a few spurious characters printed at the top of this unwanted page. The following "proper" pages are OK. I have, so it seems, the lastest driver available.
View 7 Replies
View Related
Jun 17, 2008
I cannot set the default printer in Vista Business with SP1. I am connected to a domain trying to set a network printer hosted from a server as the default printer. I have seen a dozen or more questions similiar to this in this group as well as on other forums and found no answer. I see a MS-MVP come on and tell people to remove local printers such as the XPS and adobe printers. This is a ridiculous solution. Sure it may allow you to connect to a network printer but you have removed printers that you are going to need to use again. Unacceptable.
So far the only other solution that does not include deleting all the local printers off of the machine is to make sure you have write permissions to the default printer registry key. I have checked this and I do have write permissions(Full Control). SO WHAT NEXT? IS MICROSOFT EVER GOING TO COME OUT WITH ANOTHER FIX FOR THIS?
View 4 Replies
View Related
Jun 22, 2008
i have installed a printer from my main pc which uses xp pro to my new vista lap top ----- it shows the icon for the printer in the tray but i cannot still print any thing
View 7 Replies
View Related
Apr 10, 2009
I just upgraded my XP home edition to Vista home premium with an upgrade disk provided by Dell. Before the upgrade I uninstalled my HP 2575 printer and software because it was listed as a compatibility issue. After upgrade I reinstalled new software from HP for my printer from the HP website. I plugged in the USB cable from my printer. Vista recognized the new device but would not put it in the printer folder in the control panel. Vista did find driver software online but could not install it. The HP solution center tells me no HP devices have been detected. When I try to print I get a message that I don’t have a printer hooked up. That’s the back ground here is what I have done.
I have updated Vista; most were successful some security ones failed. I have Service pack 1 I uninstalled and reinstalled HP software many times I started my spooler and reinstalled printer and software many times. I checked Task Manager and the hpqste08 services are running. I uninstalled virus protection and turned off the firewall. I have done everything I can find at HP, Microsoft and here. I tried to reload Vista but got a Worker Thread Returned at Bad IRQL error message so I stopped reload.
The one odd thing I did find was in the Device Manager. In the Device Manager the HP 2575 is listed twice. Once under IEEE 1284.4 compatible printer and once under Other Devices. When I click on the one under IEEE 1284.4 compatible printer and update driver software it finds the driver and says it’s up to date. When I do the same on the one under Other Devices, windows finds the software for this device but encountered an error when trying to install it. It does this when looking online and when looking in C: drive.The printer still does not show up in the printer folder in the control panel.
View 7 Replies
View Related
Jun 10, 2008
I have a Vista Home Premium Laptop, an XP Home laptop and an XP Home desktop (and an XBox 360) connected to my Linksys wireless G router and an XP Home desktop connected via CAT5 to the same router. All connect to the internet fine. The XP laptop finds and uses the printer on the desktop fine. I had setup a share of the Canon I560 printer, connected to my XP desktop, on the Vista laptop and it worked fine. I don't believe I made any changes, but now it won't find the printer and I can't seem to install a new copy.
The Vista machine will not detect the printer and won't even find the XP desktop or laptop on the network. The XP machines find each other fine. All machines get their IP address from the router via DHCP. All are in the same workgroup, or it seems so. Strangely the Vista machine shows WORKGROUP and the XP machines show Workgroup, even if I type the name in caps, XP still shows Workgroup and Vista WORKGROUP.............
View 6 Replies
View Related
Jun 10, 2008
I have a Vista Desktop that has a wireless router. I have shared a printer, but I would like my Mac laptop to be able to print to it. Do I install the printer driver on the Mac or on the Vista machine? If I install on the Vista machine, is there a special installer? The printer is an HP DeskJet 2445.
View 4 Replies
View Related
Nov 21, 2008
I have a HP Color Laser Jet 3600n already installed on the company network. I just got a new gateway with Windows Vista Home Premium 32bit. When i go to the printer wizard it locates the 3600 printer on the network. Then it asks me to choose the printer software from a list. or choose a disk. I don't have the disk. So, looking through this list, it doesn't even have the HP Color Laser Jet 3600 in there. it's got a 3000 and then jumps to 7000.
View 9 Replies
View Related
Oct 8, 2009
i have a printer on my old windows xp computer. but i went to hook it up to my vista, obviously the printer is not compatible which sucks. so is there a way i can connect it through a network? i have no idea where to start or what to do first.
View 4 Replies
View Related
Dec 31, 2009
Problem: sfc/scannow stops at 76 %, gives no Info just that it can not
perform the requested operation
it started when I Restored the System to Factory Install with the Discs ( 2
Discs) sent to me by Acer by mail
SP 1 is already on the Discs, all Updates installed successfully, including
SP 2
Event Viewer shows some Errors but don't know witch are associated with the
sfc/scannow
Problem Reports and Solution (reports but no solution found)
1.-
Problem signature
Problem Event Name:WindowsWcpOtherFailure3
OsVersion:6.0.6001.18000:1
File:basewcpsilmergedtutsystem.cpp
Function:Windows::Rtl::SystemImplementation:irectFileSystemProvider::SysReadFileLine:1920
Status:c0000011
StackHash:0x563c8df4
OS Version:6.0.6001.2.1.0.768.3
Locale ID:1033
2.-
Extra information about the problem
Bucket ID:182505946
Problem signature
Problem Event Name:CbsPackageServicingFailure
Stack Version:6.0.6001.18000
Package:Package_for_KB973687~31bf3856ad364e35~x86~~6.0.1.1
Status:80070026
Failure Source:Execute
Start State:Resolved
Target State:Installed
OS Version:6.0.6001.2.1.0.768.3
Locale ID:1033
Extra information about the problem
Bucket ID:769551469
I suspect that its related to the CBsPackageServicingFailure or both or more
don't know where to go from here
would really like to get sfc/scannow working Email with Acer America this Computer is still under Factory Warranty don't know what it covers, but they DON'T want me to return it to Store in Winnipeg where I purchased it don't know if I been screwed, this computer (LapTop) does Not have a Recovery partition, it has 1 disc C and 1 partition 232 GB (my Emachine Home Basic Desktop did have a Recovery Partition on D)
the Store made me set, 2 Discs after I complained and Acer sent me a set, 3.
Discs after some Emails already been at the store they are slick and have few answers , don't think I'll get far at the store.
View 9 Replies
View Related
Mar 23, 2008
I am testing VISTA Ultimate and find that I cannot get any of my older scanners to scan - nor can I find VISTA drivers for them. I have
1) HP PSC950 AIO (It prints however)
2) MUSTEK 1200LP
3) UMAX POWERLOOK II
Anyone out there have any luck getting any of the above to scan in VISTA? If so, how did U do it? Did you find driver(s) somewhere?
View 9 Replies
View Related
Nov 7, 2009
i have vista SP1 premium 64bit and when i put in call of duty 4 or demigods (both pc games) it sounds like theyre running, but then they stop all of a sudden i want to install it and play, theres no scratches on the games and theyre both brand new
View 9 Replies
View Related
Mar 23, 2008
I got a new computer with Vista I am trying to set up my fax. Help told me to go to Start, All Programs, Windows Fax and Scan but there is no Windows Fax and Scan on my menu. What can I do?
View 9 Replies
View Related
Apr 14, 2008
I'm using Vista Ultimate with Fax and Scan. It won't recognize my Canone LIDE 30. All of my other programs that use the scanner do recognize it. I am looking for a sure thing ... a scanner that will work with Ultimate's Fax and Scan. I have heard that MS dropped TWAIN for this product and uses a different methodology.
I did have a network All In One but had nothing with problems using it with Vista. So now I'm thinking I'll just connect a scanner to the computer. I tried other software but I received a message that it couldn't access the modem because it was in use by another program ( not the case ).
View 7 Replies
View Related
Mar 23, 2008
I can't get WFS to successfully use the fax modem on my mobile phone over Bluetooth. The modem and Bluetooth connection are working fine outside WFS and I can successfully connect to a VPN over the internet using the mobile phone's modem via Bluetooth. I just can't think what could possibly be the problem. Has anyone else tried to set up their mobile phone as a fax modem over Bluetooth?
By the way, my carrier is T-mobile. I have already called them and they have confirmed that fax and data is enabled on my account. I'm using a Nokia 6233 but I don't think that should be relevant because I can already us the modem over Bluetooth to connect to the internet.
View 6 Replies
View Related
Mar 23, 2008
I have an HP pavillion dv6000, and i have all the printer, and scanner drivers, and my scanner is installed no problem but i don't know where to scan, in windows xp, i find my scanner in my computer? I have an HP PSC 2210
View 5 Replies
View Related
Dec 24, 2008
I use my computer to scan pictures or look at stuff on ebay. I would say I am on the computer 2 hours a month. I have a hp 2200 all in one printer that worked fine with my old cheap $400.00 computer. My husband thought he would be nice and buy me an upgrade I now have an $1100.00 computer that won't scan pictures and after two months and more time than I have ever spent on a computer I am finding out this is not uncommon.
View 8 Replies
View Related
Mar 23, 2008
i want to upgrade my windows vista basic so it can fax & scan. how to upgrade.
View 4 Replies
View Related
Mar 23, 2008
I am missing the Windows Vista Fax and Scan. How can I download or what file is it on the software?
View 9 Replies
View Related
Apr 5, 2009
I want to put more ram on my PC & I don't know where I can found out how much it can take. I tried crucial.com/uk but everytime I try to run the scan, my PC gets
the blue screen.
View 9 Replies
View Related
