All phases of the printer operation run very slowly with all programs. It is a matter of Click and wait for probably over a minute and sometimes longer ? not just a few seconds delay. If this is not the correct place to ask we hope you can link us..........
View 9 RepliesI tried to scan with the Epson NX 415 printer but I get an error saying that it is unbale to communicate with the computer. I installed the latest drivers, and when I was chatting with the Epson tech support, they had me try to scan with Pain, but that too did not work. So they said I had a problem with the Windows Image Acquisition (WIA) service and to contact Microsoft. Not sure what I need to do to get this working. I am able to print fine with the printer. My OS is Windows Vista Home Premium 64-bit
View 5 Replies View RelatedProblem:
1) Extremely slow shared printer response
2) application nonresponsive while printing
Network Topography:
1 Vista Home Premium 32 PC
1 Vista Home Premium 64 PC
Cisco SD2008 Switch
1 HP 4050 Laserjet (Parallel connected to Vista 32 Machine above)
Configuration of Printer:
Connected via parallel to Vista 32 machine
Printer is configured for sharing and is installed on both machines
test pages print successfully from both machines
Additional notes:
During printer setup on the Vista 32 machine, I attempted to install
additional 64x drivers, but could not locate them, so I skipped this step.
During printer setup on the Vista 64 machine, the shared printers were
identified successfully, and I added the network printer. I was not asked to
install drivers the way I have in the past when adding a local printer.
Printing using the shared printer on the local machine Vista 32 performs
with normal speeds. Printing from the network computer Vista 64 using the
shared printer installed on Vista 32 is extremely slow. Even typing in print
job changes in the print dialog window takes 30 seconds or so for each key
stroke to register a response onscreen.
I originally posted this 6-24 on only the Vista Printer_fax_scan NG with no response. Multiposted now to broaden the range of people seeing the post. Really need assistance. TIA.
I have a laptop (new HP) with Vista Home Premium SP1 preinstalled, 3 GB RAM,250GB HDD, AMD Turion 64 processor. Using Zone Alarm free as firewall and AVG 8 free as antivirus. Know that firewall is not issue since have full access to printers (can ping the network connected printers) and all other networked computers without problem. I understand that AVG has had a printing issue in the past but I totally turned off AVG by uninstalling itand this did not clear the issue with printing.
Out of the box I have connected the new laptop to the following printers using the latest drivers available from the manufacturers or using Vista's built in if the drivers aren't available from manufacturer's web site.
The following are connected through the home network via wireless and work flawlessly with 3 laptops running XP Pro (2) and XP Home (1).HP 2200DN - B & W Laser (network with Cat5e cable through WAP/Switch) OKIDATA 5150 - Color laser (network with Cat5e cable through WAP/Switch)Epson 1280 (connected through a Sony XP computer share) Epson R260 (also connected through the Sony XP computer)
The last printer is a Canon BJC80 which is connected via a USB to Parallel printer cable (Belkin) which works great with no delay on any of the laptops running XP.
I have a real problem. I have an Epson colour stylus 680 that was printing, connected via USB to a laptop using vista. I disconnected the USB cable for a while and now it refuses to print anything. Odd facts:
- The printer is installed again every time I connect the cable, (annoying)
- The PC detects the cable automatically, but still it doesn't print
- The print command is getting sent through, but isn't actually printing
- I have changed the ports various times and deleted printers, reinstalled them, and rebooted, etc, to no avail.
I have called Epson, who said it's better I talk to Microsoft, who then directed me to PCworld/Advent, and still I can't get the thing to work. Last time, the guy at Epson, by trial and error, I think, managed to get it working, but heaven knows how.
My wife has an Epson Stylus Photo 1280 printer. We installed the driver from Vista the issue she is having is she cannot go into the printing preferences to change the size (change the margins) it will not allow here. She prints true 12x12's and under Vista it will not allow her to change these setting under XP no problems. I was able to set a user defined 12x12 paper size. It is not listed as an option to print through the Windows Photo Gallery. And I can?t print it through my Memory Mixer software, it wants to change the dimensions and then it only prints a little square right in the middle of the page.
View 5 Replies View RelatedI have an Epson Stylus C64 printer which I am able to use as normal (with ink levels and status monitor appearing) on my old computer with Windows XP.
My new laptop is Vista and although I have installed the Epson Stylus Printer Software that came with the printer onto the laptop, the Ink Indicator Levels and the Epson Status Monitor options showing in 'Printer Prefences' seem to be grayed-out/disabled. I am unable to gauge my ink levels so have no idea how much ink I have available and/or when to replace it. The actual printing seems to be fine at the moment but I am unable to tell when the ink requires replacing.
I have tried to re-install the Epson Printer software but nothing seems to change - the ink levels and status monitor contine to be disabled/grayed out. I noticed that when installing the software I am asked to disable any anti-virus software - I have Norton installed but have no idea how to uninstall it - my computer also seems to be automatically provided with something called McAfee Security - again I am unsure how to disable this and whether in fact I need to do this - it may be that the anti-virus programs are hindering the Epson software from fully loading? Any ideas and/or suggestions would be most welcome.
I cannot install an Epson Perfection V200 Photo Scanner on my Vista Home Premium equipped PC. Epson technical support personnel have been zero. This is a new model scanner that is supposed to work with Vista. I have used the software disk that came with the scanner, and I have downloaded and used the latest driver from the Epson website. I have installed, uninstalled, and installed both of these numerous times. I always get the same error message......
View 9 Replies View RelatedI?m trying to install a network printer on a Vista machine. Vista is able to locate the printer on the network but when I select it for installation, for some time, Vista tries to connect and then pops up this message: "Failed Connecting to Printer - Access Denied" And then another window pops up with this message: "Spooler Subsystem Application stopped woring and has been closed." In fact the spooler service always stops, so I have to restart it on the services windows, within Administrative Tools of the Control Panel. The machine is new and has been installed yesterday. Everything else works fine. The printer I am trying to install is on a Windows XP Professional machine within the same network (naturally).
View 9 Replies View RelatedI have a Dell PC with XP Home and a Dell A960 Printer attached to it. I also have a new HP Laptop with Vista premium that has also had the same printer attached to it at times so the drivers are installed on HP laptop. I recently installed a router so I can use laptop wirelessly. That works fine. However, I am unable to print to the host printer wirelessly. I get message saying printer cannot communicate with computer. I tried everything I found on Google searches. I have enabled printer sharing on both. Do I have to make the Workgroup names the same and if so do I change the Dell with XP or the HP with Vista? I changed the Dell once to no avail so I changed back. Do computer names have to be same? I am a novice at networking.
View 6 Replies View RelatedDose anyone knows if they make a printer cable: I received a new lab top and it didn't come with the older printer jack on the computer. I guess I need to use one of the usb ports? My Epson 660 still works I hate the idea of getting a new printer when my old one works.
View 4 Replies View RelatedJust installed Vista SP2. Everything seems to work OK except for my Dell 1720 printer. It now prints an extra page before the actual document to be printed. There are just a few spurious characters printed at the top of this unwanted page. The following "proper" pages are OK. I have, so it seems, the lastest driver available.
View 7 Replies View RelatedI cannot set the default printer in Vista Business with SP1. I am connected to a domain trying to set a network printer hosted from a server as the default printer. I have seen a dozen or more questions similiar to this in this group as well as on other forums and found no answer. I see a MS-MVP come on and tell people to remove local printers such as the XPS and adobe printers. This is a ridiculous solution. Sure it may allow you to connect to a network printer but you have removed printers that you are going to need to use again. Unacceptable.
So far the only other solution that does not include deleting all the local printers off of the machine is to make sure you have write permissions to the default printer registry key. I have checked this and I do have write permissions(Full Control). SO WHAT NEXT? IS MICROSOFT EVER GOING TO COME OUT WITH ANOTHER FIX FOR THIS?
i have installed a printer from my main pc which uses xp pro to my new vista lap top ----- it shows the icon for the printer in the tray but i cannot still print any thing
View 7 Replies View RelatedI just upgraded my XP home edition to Vista home premium with an upgrade disk provided by Dell. Before the upgrade I uninstalled my HP 2575 printer and software because it was listed as a compatibility issue. After upgrade I reinstalled new software from HP for my printer from the HP website. I plugged in the USB cable from my printer. Vista recognized the new device but would not put it in the printer folder in the control panel. Vista did find driver software online but could not install it. The HP solution center tells me no HP devices have been detected. When I try to print I get a message that I don’t have a printer hooked up. That’s the back ground here is what I have done.
I have updated Vista; most were successful some security ones failed. I have Service pack 1 I uninstalled and reinstalled HP software many times I started my spooler and reinstalled printer and software many times. I checked Task Manager and the hpqste08 services are running. I uninstalled virus protection and turned off the firewall. I have done everything I can find at HP, Microsoft and here. I tried to reload Vista but got a Worker Thread Returned at Bad IRQL error message so I stopped reload.
The one odd thing I did find was in the Device Manager. In the Device Manager the HP 2575 is listed twice. Once under IEEE 1284.4 compatible printer and once under Other Devices. When I click on the one under IEEE 1284.4 compatible printer and update driver software it finds the driver and says it’s up to date. When I do the same on the one under Other Devices, windows finds the software for this device but encountered an error when trying to install it. It does this when looking online and when looking in C: drive.The printer still does not show up in the printer folder in the control panel.
I have a Vista Home Premium Laptop, an XP Home laptop and an XP Home desktop (and an XBox 360) connected to my Linksys wireless G router and an XP Home desktop connected via CAT5 to the same router. All connect to the internet fine. The XP laptop finds and uses the printer on the desktop fine. I had setup a share of the Canon I560 printer, connected to my XP desktop, on the Vista laptop and it worked fine. I don't believe I made any changes, but now it won't find the printer and I can't seem to install a new copy.
The Vista machine will not detect the printer and won't even find the XP desktop or laptop on the network. The XP machines find each other fine. All machines get their IP address from the router via DHCP. All are in the same workgroup, or it seems so. Strangely the Vista machine shows WORKGROUP and the XP machines show Workgroup, even if I type the name in caps, XP still shows Workgroup and Vista WORKGROUP.............
I have a Vista Desktop that has a wireless router. I have shared a printer, but I would like my Mac laptop to be able to print to it. Do I install the printer driver on the Mac or on the Vista machine? If I install on the Vista machine, is there a special installer? The printer is an HP DeskJet 2445.
View 4 Replies View RelatedI have a HP Color Laser Jet 3600n already installed on the company network. I just got a new gateway with Windows Vista Home Premium 32bit. When i go to the printer wizard it locates the 3600 printer on the network. Then it asks me to choose the printer software from a list. or choose a disk. I don't have the disk. So, looking through this list, it doesn't even have the HP Color Laser Jet 3600 in there. it's got a 3000 and then jumps to 7000.
View 9 Replies View Relatedi have a printer on my old windows xp computer. but i went to hook it up to my vista, obviously the printer is not compatible which sucks. so is there a way i can connect it through a network? i have no idea where to start or what to do first.
View 4 Replies View RelatedI'm trying to install my Printer Driver for Canon Pixma printer. When I run the executable to install the driver, it come back with "Printer Spooler is not running, Restart Printer Spooler. So I re-start Printer Spooler under Admin. Tools. Then I try to run the executable again. And again the Printer Spooler is stopped. It seems the executable stops the Printer Spooler?
View 5 Replies View RelatedI have a new laptop with windows vista and my desktop has XP on my desktop is a printer installed and with my old laptop i could print with that printer. Now I'm trying to get this to work with my new laptop but it doesn't work. On the desktop I have enabled sharing the printer and both computers are in the same workgroup and if i get the vista to detect the printer via the setup of "add printer" it will find it but when i try and
connect it it says "can not connect, acces denied" I've tried some things but
it didn't help. I've installed the driver of the printer and i can still print with my
old laptop.
I am involved with out U3A (Educational charity for retired people) we bought our membership secretary a new Vista computer when her XP system died and of course her old Dell all in one wont work. Does any one have details of a working all in one (printer / scanner fax not essential) which worked "straight out of the box" or with minimum driver download. I have searched the web without much sucess
View 7 Replies View RelatedI have added hp printer deskjet 5850 to vista hame as a 5600 (as told on hp website) It printed. then I added a laserjet 2100 via a parallel to usb. This works fine but the 5850 has stopped working. I tried plugging into a different usb port which has just clogged up the port but not got the printer working.
View 4 Replies View RelatedI have a PC running Vista Ultimate x64. Attached to that PC (via USB) is a HP Photosmart C3180. My wife's laptop is running XP Professional x86. I am trying to allow her to print to the printer attached to my Vista x64 PC. I install the printer properly and confirm it working on my Vista x64 PC. I then share it out under the name HPC3180. I disable password protected sharing and under the security settings of the printer I give "Anonymous Logon" permission to access the printer.
I know generally I would have to specify the x86 version of the driver under the "Additional Drivers" area in the properties of the printer; but in this case I do not know where to get the .INF files. I can download the drivers for the 32 bit version of XP from HP's site, but they aren't self extracting EXE files so I cannot get the INF file out of them to use. I even tried setting it up (on XP x86 laptop) as a "Local Printer" with a "Local Port" that points the printer. I then tried to use a variety of older and generic drivers. At worst it refused to print entirely. At best I got some sort of seemingly random output from the printer.
old computer newbie has desktop with xp hardwire connected and new laptop with vista wireless connected. printed is hardwire connected to old computer. so far I can only create a network showing new laptop and the new router installed between the old external modem and old computer. I really want to be able to use old printer from my new laptop.
View 9 Replies View RelatedUsing HP psc 2510, linksys wrt54g router, and Toshiba laptop with Vista os.Everything is great for a few days, then the printer will not work.Looking at control panel, printers, I see the printer is offline.How do I get it back online? The blue light is on, but it will not print network config page.I have to reset the router and reinstall the printer to get it working again.
View 9 Replies View RelatedI cannot get my 64 bit vista machine to connect to a printer connected to my 32 bit XP machine. I have read all kinds of advice on various forums and the microsoft support site but nothing seems to work. Both computers have been networked for some time, I am able to share files and folders, both computers see the other in their network folder. I have pinged the printer, the other computer back and forth and everything is OK. I can see the network printer connected to the host computer but when I try to connect, I get the message that the server does not have the correct driver(s) installed. The printer prints fine from the XP machine.
When I tried to install the drivers on the Vista machine I was told by HP that they do not have a full version of the drivers for my 64 bit macnhine but could only provide basic drivers which I downloaded and installed. I have tried creating a new port with the host computer name and printer name but all I get is the network path cannot be found. I have followed some of the suggestions for similiar problems on this site where people have had success but those ideas just don't work. The printer is a HP Photosmart 7960 which I have had for several years. Right now I am at my wits end and ready to go back and start over, maybe I missed something minor.
I just got vista home premium and tried to copy pothos from my Dell924.. won't work. I downloaded the drivers and softwear for vista 32bit and installed but to no avale. I can print. Do just take a stick and whack it?
View 4 Replies View RelatedWhen you turn on file and printer sharing, both file and printer sharing are turned on. Is there a way to turn on printer sharing only? by default, c$ is always shared on windows XP pro, I am not sure about vista/windows 7 home premium. So there is some security risk with file sharing, while there is less risk with printer sharing.
The PCs are behind the firewall, however, there is a possibility that the PC used by the kids have trojan or are even hijacked (anti-virus are installed but it's still not that secure). So I only want to share the printer.
If my printer is not turned on, Vista will not cold boot (returns from hibernate fine, but won't boot fresh). If I turn on my printer before Vista starts to load, though, I'm home free.
As well, certain installation programs will simply hang unless and until my printer is turned on. I just upgraded my Catalyst drivers yesterday, and while it was detecting my hardware it just sat at halfway across the meter for 20 minutes. I turned on my printer, and within seconds it was finishing the installation.
I just gave away my Dell printer because it was incompatible with Windows Vista, and i need a new printer ASAP. Please let me know which printers ($210.00 max) might be Vista-compatible. Specifically, I am searching for an all-in-one with scanning and perhaps duplex.
View 6 Replies View Related