My scans take VERY long time to complete. Over an hour. Two internal drives:
1 - 495 G - 1 G Taken
2 - 232 G - 58.3 G Taken (my OS is on it)
And one external, which is disconnected for the time of the scans. You can tell me what to run to show you the exact memory, if you wish.
i am having really slow boot ups lately on my laptop. i have done things such as virus scans, defrag hhd, scan regestry with REGESTRY BOOSTER 2009, defrag regestry. i also have no start up programs in my strat up folder. Problem is that i could start from dead start to a fully loaded desktop in 98 secs....now it takes 124 secs to do the same thing. where it takes the longest is at the boot screen i just watch it load then the windows logo comes up and it smooth sailing from there. i would say it takes about 8-12 secs after the windows logo to get to desktop.
View 9 Replies View RelatedMy D Drive shows that 0% memory available. Calling a recovery D Drive? 173 mb of 9.99 GB available. Tried disk clean up, defrag. no help. What now?
View 4 Replies View Relatedi have a HP pavilion dv6314 laptop. it has vista ultimate x 64 bit version, sp1 on it. i have upgraded it's RAM to 4gb but i could only see 3069 mb being used in the task manager. but in the laptop's property it does show 4 gb memory. my question is what happed to that exta 1 gb memory, is it lost???? or there is something wrong???? I have updated the BIOS to the latest version from the HP website.
View 4 Replies View RelatedMy girlfriends laptop is having issues. its a gateway m-1617. her hdd failed so I replaced it with a working spare I had from a hp vista laptop. specs were the same so I thought it may work. but I am unable to re-install vista on it. the hdd is recognized in bios but when I get into the vista install screen there is no hard drive located to format. Do I need to order an EXACT replacement for the OEM hdd or can I make this one work somehow? Or is there possible other hardware failure??
View 9 Replies View RelatedI've noticed my system becoming pretty sluggish when running more than a couple of apps (internet explorer, the odd game etc). I'm running a Vista Home Premium set up with a Pentium Dual Core 3GHZ chip and 2GB RAM which should have (and previously did have) more than enough grunt.
When I look at Task Manager after startup (with little running) I can see that the Physical Memory utilisation is up at 70-75% and in the performance tab, I have approx 4MB free (and the usage history graph is up at approx 1.5GB). I'm very experienced with pc's so I know about Vista's superfetching etc, but the system is dog slow.
I've disabled everything that I don't need at start up (as well as some services which I won't use). I've run AVG virus scan, Spybot and AdAware repeatedly, along with CCleaner and Disk Defrag. Security Task manager doesn't show me anything suspicious either. I've uninstalled anything that I won't need, and still it's running incredibly slow. The windows experience score is still at 4.8, so in theory the system is sound. I can't see what's utilising all of this memory in the Processes so I'm stuck.
I have Vista 32 bit,intel core2 duo t7250 processor,3gb ram,nvidia 8600m dell xps 1530 laptop. My friend also has ame lappy. His system works perfectly fine, but my system is too slow.There is lag in simple operations also like there in a lag of 1-3 seconds in opening folders,it always takes to load/show all data in the folders. This problem is still persists even after i have disabled all unneccesary stuffs.
View 7 Replies View RelatedI have a new VISTA ULTIMATE installation, with very little on it as yet. I am the single user 'GECKO'. I have installed the software for my HP AIO, and it wants to store its scanned images in c:documents and settings under GECKO, which is okay. I believe the images actually are in folder c:documents and settingsGECKOMy Scans. However, I can't get a look at them in Windows Explorer because I get an error when I click on c:documents and settings 'not accessible - Access is denied. Since I am the only user, and the security properties all seem to allow me free access to that folder, why is this happening? And, more important - how can I fix things?
View 9 Replies View RelatedI have Avast Home Edition on my Vista laptop. I ran a scan yesterday but this morning the Defender bottom righthand icon had an exclamation mark in it and I'd thought, from using 3 other AV programs before, that Defender doesn't nag if you have other software doing scans? Or do I need to set it to do nothing?
Also, when I run the Avast scan, it says in its display (above Type of Current Scan etc) Scan Archive Files: disabled - should it be like that? What does that mean, and if I need to change it, how do I, as I couldn't find anything in the settings. I'm assuming there's no connection between my two questions.
I'm getting a pop-up during some (but not all) boot ups in the morning. It gives me the option of allowing it or cancelling it - cancelling means I don't know what the program is and don't want it to load. What the heck is going on? Is this mal-ware? Is it already on my computer? My mal-ware scans with Ad-Aware don't mention it. Nor do scans by Windows Defender. But it's spooky....
View 6 Replies View RelatedI am using this program to clean up my registry and it seems to work fine except the errors keep coming back. I can do a scan, clean up all the errors and then shut down and start up and I have a new 20 registry error list and most or all of the errors relate to "bad path for the value" and its windows files that seem to be at fault. I don't understand why Microsoft operating system would create registry errors on a startup, before anything has been installed etc. is RegistryBooster misleading me or what. I am running win7 but it did the same thing on vista home premium so I think the question is valid for this group.
View 7 Replies View RelatedMemory DiagnosticsIf Vista detects a memory problem in your system such as a faulty RAM module, it will display a notification asking if you want Vista to try to diagnose the problem.Then again you may also recieve the sudden BSOD with the error MEMORY MANAGMENT at the top. You can manually run this tool anytime just typememory in the search box inside the start menu.This tool offers you two options: restarting immediately and checking for problems, or running next time you reboot your machine (the memory diagnostic tool must run at boot time).
Network DiagnosticsWindows Vista also allows you to check the connectivity of your network connection using the Network Diagnostics Framework: An infrastructure and a set of built-in and extensible components that attempts to automatically diagnose and correct network connectivity problems. The usual way to run this check is to open Network Center and click the Diagnose Internet Connection link on the left Vista will either identify ............
Is my first post and i have a problem with avi file icon. I am from Cyprus and my english its not very good. Some of my avi files show a picture and some others show a black icon. I did not have this problem before. Before all my avi files show a picture. I have K-Lite Mega Codec Pack (new version). I try Vista Codec but i can solve it. If you don't understand my english, one of the moderators please delete my post.
View 6 Replies View RelatedI had 4GB physical memoryon the PC. With Windows vista 32 bit, available memory is shown as 3.3GB. I asked and was told that only under 64 bit windows, will the available memory be 4GB. When I upgraded to windows 7, I chosed 64 bit, but the available memory shown in the system is still 3.3 GB. Why is this and is there a way to make the full 4GB available? It's possible that my video card is using RAM instead of its own RAM. If I install a video card with its own RAM, will the full 4GB be available?
View 9 Replies View RelatedI have a problem with Vista Ultimate x64 SP1, I always seem to lose all my free RAM within an hour regardless of system activity, even while idling. I have noticed an svchost.eve process runs each time I reboot which seems to bloat constantly although when I close it down it only frees up about 800MB, what's happening to the rest of my 8GB??? When I launch Task Manager it says I'm only using 10% Memory but free RAM sits at 0?!?!
View 9 Replies View RelatedI had 4GB physical memoryon the PC. With Windows vista 32 bit, available memory is shown as 3.3GB. I asked on usenet and was told that only under 64 bit windows, will the available memory be 4GB. When I upgraded to windows 7, I chosed 64 bit (I did clean install of course), but the available memory shown in the system is still 3.3 GB. This is show in both task manager under performance->Physical memory->total, and 'property of My Computer'->Installed memory (4GB/3.3 GB usable)........
View 7 Replies View RelatedI am fairly new to the forums, and VERY new to Vista x64. The machine is new, and I was trying out some apps and games, I was in Secondlife when I got an error messege saying I was out of memory and needed to free up memory. I shut down the app and restarted it. Runs but I watched Task manager and saw my free memory down to almost nothing after an hour or so. The cached seems very high.
I did alittle research and decided to set a second page file on my 1TB hard drive, (OS is on the other HHD's )( regulated by system for size ) I'm not really sure whats going on. Example of just task manager and this page openis attached. Again, any help would be great in getting the memory set up on here optimal.
I have 6gigs of DDR3 memory at 1600hz. Running on Vista 64bit and every now and again my memory performance just maxes out. The problem can occur around the time when I am installing something but I dont think its always this way. I have read forums where it could be the hardrives performing self diagnostics. I have all the latest patches for vista.
View 7 Replies View RelatedI'm running Vista 64 Home (SP1) Premium on a homebuilt machine w/8GB (4 X 2GB modules). Windows is reporting 8 GB of Installed Physical Memory but is reporting only 4 GB of Total Physical Memory. I first noticed this when, after installing a game, the game system specs said 3092 MB of RAM.
I have checked the BIOS and it recognizes 8 GB. Memory Remapping is Enabled. Under Memory Remapping is "PCI MMIO Allocation: 4GB to 3328 MB" (?). MSConfig Boot Options shows Max Memory is not checked and no value in the box below. I tried enabling it and using 8192 as the value, but it made no difference. DxDiag shows 8 GB installed RAM. how I can get windows to make available all 8 GB of RAM? (Motherboard is ASUS Maximus II Extreme w/Intel Q9550 processor running at Q9650 clock speed, memory running at 1127 MHz
Problem:
1) Extremely slow shared printer response
2) application nonresponsive while printing
Network Topography:
1 Vista Home Premium 32 PC
1 Vista Home Premium 64 PC
Cisco SD2008 Switch
1 HP 4050 Laserjet (Parallel connected to Vista 32 Machine above)
Configuration of Printer:
Connected via parallel to Vista 32 machine
Printer is configured for sharing and is installed on both machines
test pages print successfully from both machines
Additional notes:
During printer setup on the Vista 32 machine, I attempted to install
additional 64x drivers, but could not locate them, so I skipped this step.
During printer setup on the Vista 64 machine, the shared printers were
identified successfully, and I added the network printer. I was not asked to
install drivers the way I have in the past when adding a local printer.
Printing using the shared printer on the local machine Vista 32 performs
with normal speeds. Printing from the network computer Vista 64 using the
shared printer installed on Vista 32 is extremely slow. Even typing in print
job changes in the print dialog window takes 30 seconds or so for each key
stroke to register a response onscreen.
I Called The FBI And Told Them There Is An Imposter Lurking In The Vista
Group.
Just FYI.
They Hung Up On Me.
Just FYI.
I know that when using 32-bit Vista you can't expect to see all 4GB of
installed RAM but I was under the impression that you should see between 3.1
and 3.5GB. My new Dell Precision laptop has 4GB RAM but only shows exactly
3GB. The BIOS reports 4GB.
So my MMC will not open. I click on it then UAC opens then nothing. I have run sfc /SCANNOW it can not fix the issues I will posted results. I want to fix this without reinstalling windows any solution come to mind.
Code: 2009-07-03 00:35:47, Info CSI 00000006 [SR] Verifying 100 (0x00000064) components
2009-07-03 00:35:47, Info CSI 00000007 [SR] Beginning Verify and Repair transaction
2009-07-03 00:35:55, Info CSI 00000009 [SR] Verify complete
2009-07-03 00:35:56, Info CSI 0000000a [SR] Verifying 100 (0x00000064) components.....
I have x86 homepremium, and like when i had 64, i still get tons of errors from my ram (its bad ram, and i beleive its cuz its 4GB too) Anyways, what should I do, I have 2 Slots, but I want 3GB and it has to be DDR2.. Would it be effeicent to go 1(2GB PC-5200 DDR2SD 667) and 1(1GB PC-5200 DDR2SD 667? OR should i simply just do the same but have it 1GB and 1 GB instead of 2 and 1 or does that not work well with dual channel sorry for my lack of knowledge
View 4 Replies View RelatedI have Vista Ultimate x64 Extreme, with 8 GB of memory, Q9300, and 2 velociraptors. I do NOT overclock, but would like Vista to use more of the memory. Typical load usage of memory is 2GB - about 25% of my total memory Maximum use of memory was 3GB - I would rather have Vista use memory than to use swap file. How can I get this done?
View 9 Replies View RelatedI have Vista Enterprise with 2gb of memory.
everytime i try to access a folder on my external hard drive (Toshiba 2.0 USB), it freezes explorer and and error message comes up saying out of memory, but i can't read it all because most of the window is just black.
also, before all of this started my NVidia graphics had a message pop up saying the NVIDIA Display Panel Extension cannot be created.
Possible reasons include:
Version mismatch. Reinstalling display drivers may solve this problem.
i've tried to download drivers but the only place to find them are on lenovo support and they didnt help
I am putting together a new build and since PC-6400 DDR2 is sooo cheap I thought I might consider 8GB on an X38 board. I already have 2x2GB dimms, and was guessing if I went to 8GB it might be nice to have 4 identical DIMMS, which are still available (ie, another 2x2gb of the pair I have now). Anyone have wisdom about this? My main uses NOW are MS Flight Simulator, Gigastudio, and both of those benefit from at least 3GB, beyond that I don't know. I don't forsee video editing.
View 9 Replies View RelatedDoes Vista SP1 recognise my 8gb physically or only as being installed?
View 9 Replies View RelatedWhy vista use alot of memory?
Even fresh install new PC with Vista 64bit and not install any
applications, still more that 1GB in used memory
I just got Vista this april for the first time Vista Ultimate 64 bit to be precise. It came with a new computer that has 4GB of Ram...which I thought would be plenty, but apparently not? Right now I have 4 programs running: Sony Vegas, Zune, Firefox and MS Word. Including all the background tasks like firewalls and all that good stuff, it says I'm using 2.65 GB memory. Ok I still have about 1.4 GB left right? Wrong...I have 12 MB?
2000 MB are cached. Whats up with that? Now Sony Vegas keeps crashing because I dont have enough ram and I cant open Windows media Player because I dont have enough ram....What happened to all my memory?
i have 4 gig of memory on my pc. i reinstall my vista. after the installation, my machine said that i only have 3gig. where is my remaining 1 gb (i put 4gb) on it. before i reinstall it my pc read my 4gb:o of RAM. but now 3gb only.
View 5 Replies View Related