Red Flag Avg Disk Queue Length
Jun 30, 2008
After doing a check on the health and performances of my comp, the program gives me a red flag for the Avg Disk Queue Lengh with a average of 2, minimum of 1 and a max of 6 I have Western Digital Caviar RE 320 Gb * 3 raid 5 (so good and fast disks) they are only 1/32 full so lots of room, the disk is defragged, all temps files are binned As you can see by my comp details I have a good setup, so why do I have such bad readings ???
EVGA 132-CK-NF780-A1, BIOS 05
Intel X6800@2.93
Video Asus EN8800GTX
Western Digital Caviar RE 320 Gb * 3 raid 5 .............
View 5 Replies
ADVERTISEMENT
Nov 13, 2008
l am trying to speed up my computer If it don't make sense to you just ignore this My comp. takes 5 to 10 sec. to open folder or Internet I been reading these threads on Memory Ram and Paging hope to speedup may be paging is not the first thing I should look at to speedup. here is the Diagnostic Report
Symptom: Excessive Paging
Cause:Available memory on the system is low.
Details:The total physical memory on the system is not capable of handling the load.
Warning: the average disk queue length is 2. The disk may be at its maximum transfer capacity due to throughput and disk seeks.....
View 5 Replies
View Related
Mar 23, 2008
I have Vista on my laptop. I need to connect to a wireless network which has WEP encryption with a 6 character pass phrase. Every time I attempt to connect Vista tells me that the pass phrase must be 5 or 13 characters long. The other users all have XP machines and are connected and working. There is no way to get the pass phrase changed.
View 7 Replies
View Related
Dec 14, 2008
Which is the maximum length for using the HDMI cable? Ok what i want to do is. I will like to connect my PC Graphic card Ati Radeon 3870x2 with my HDTV Samsung LE40A656F1 1080p 100Hz LCD 50,000:1 Both are 1080p capable and they have HDMI. But they are in separate rooms,the distance from pc to tv is 50ft long.
1)Is there any problem to use 50ft long HDMI cable?
2)Is there any <<special>> HDMI cable for 1080p?
3)Which is the best brand for the best results?
4)How do i know if my HDMI cable is 1080p capable?
(The main usage for my pc is gaming in 1920x1080 resolution and watching HD movies) I forgot to write that i already have 1 connected tv in my graphic card and i want to connect a SECOND tv in the SECOND hdmi of my card. Is that ok? i will find any problems in picture quality,sound or anything else? The purpose of all this is to play(1920x1080) games in my room,and watch 1080p movies in the living room. How i enable the second tv view in my card? (Btw i found a 15metres HQ hdmi cable) is that a good brand?
View 5 Replies
View Related
Feb 6, 2009
From the manifacture, the printer has a netbios name, a model number, its driver's name, its LPD queue name. On the server, the administrator assigns a print queue name and an IP address. what name is used for the server's print queue name and what's the purpose of it. On the other hand, why do we need the LPD queue name if we send the print job to printer's IP address? Lately, printers manufactures allow any remote queue name for LPD queue name .... how does that work compare to the specific LPD queues names?
View 9 Replies
View Related
Jan 20, 2010
You receive the message that your computer is infected and you can see the scan running behind the message box with the OK button? Is there a process to follow and a time frame before all the bad things take root? I have received the message a few times and did the following with what appears to be positive results:
Do not click OK!! Try to close the window with the X box. Shut the computer down in normal fashion. If you cannot do a hard shutdown.Reboot into the safe mode with no networking and run your scans.Reboot normally update your antivirus and scan again. I throught perhaps someone with a lot more knowledge could post a process to follow when you get this message. Is there a way to set key words in the firewall to flag this event??
View 7 Replies
View Related
Apr 9, 2008
How do I flag an email for followup? I can accomplish in XP at work. But cannot in Vista at home.
View 4 Replies
View Related
Jun 14, 2008
the print queue won't clear so nothing new can print. the test page is in the queue and says deleting, but it never does. consequently, nothing going into the queue will print. I can't figure our how to get the queue to clear so i can start fresh. rebooting the computer doesn't fix it.
View 4 Replies
View Related
Jun 9, 2008
I have Vista 6.0 (Build 6001; service pack 1) I'm also running Norton Internet Security. When I go to a website like MySpace most of the pictures are blank and have x's in them. Also if I click on a link before the page finishes loading I get a small icon on the lower left side of with a yellow error flag.
View 4 Replies
View Related
Nov 23, 2009
Is it normal for Disk Defragmenter to Analyze the disk AFTER it defragments? I know it does it before and then I click 'Defrag Now' and it proceeds to defrag my hard drive. But today I was watching it and noticed that all of a sudden it stopped defragmenting and the info changed to 'Analyzing disk...'.
View 9 Replies
View Related
Dec 28, 2008
I have four (4) hard disks C: D: E: F: all are connected with sata cable and power cable.(of course) The F: is outside from the pc and connected via external SATA and power cable (like usb NOT usb) I know,with USB external hard disk i can use the safely remove option.
Is there any option to safely remove SATA hard disk without Shut Down the pc?
1) Start-Control Panel-Device Manager-Disk Drives-Right Click on hard disk-Properties-Policies-UntikDisable the Enable write cashing on the disk??
2) Start-Control Panel-Device Manager-Disk Drives-Right Click on hard disk-Disable??
View 7 Replies
View Related
Mar 22, 2008
i was messing around with virtual disk programs and made 2 disk drives that are not really there. I can't seem to be able to delete them and its really getting annoying. How can i do this?
View 5 Replies
View Related
Apr 9, 2008
Is this normal? My disk cleanup shown me a 257GB of files to delete on my 80GB disk. I haven't local network and no external disk. I am using vista home premium with sp1, but this problem was without sp1 too. I attached link (for better understanding) to picture of cleanup.
View 8 Replies
View Related
Jun 17, 2008
I am a relatively unexperienced windows vista user using windows home premium at 32 bit on an acer aspire 6920 notebook. I noticed that occassionaly my disk space would drop dramatically without me doing anything. 100s of mbs would just disappear for no reason, so probably being stupid i decided to run the disk fragmenter to try and fix the problem. BUT to my horror i was shocked to find that the disk fragmenter began to eat up my hard disk space big style. I went from 79.7GB to 72.5GB in just over an hour. What the hell happened and can it be fixed? can i get my disk space back? i thought the disk fragmenter was supposed to help your computer not rob it. does anyone else have this problem and can someone please help me? im kinda desparate, i cant believe it.
View 9 Replies
View Related
Mar 29, 2008
My Disk is split into 2 partitions, Vista (C: ) and Data (E, each is about 70 Gb. I do not use the Data partition. I want to delete it and allow Vista(C to use all 140 Gb. The Help pages suggest that if I delete (or reduce the size of) "Data", the free space becomes unallocated? Can I repartition the disk to allow Vista C: to acces all 140 Gb?
View 9 Replies
View Related
Jun 20, 2008
When I try to open a disk, the driver ejects it and it says please insert a disk into drive. I tried uninstalling and installing the CD RW DRIVER, but it still doesn't work.
View 5 Replies
View Related
Mar 13, 2009
I need to replace my wife's motherboard, and I am trying to minimize the amount of change. She is currently running XP, but the hardware is old enough that I cannot simply swap the MBs, because a new board will need a different HAL. I was thinking about installing XP and migrating applications. I was wondering what would happen if I cloned her disk to a SATA disk and installed a Vista upgrade on top of the XP disk. I would run setup and provide the appropriate drivers at the F6 prompt. She has used Vista on occasion when we are out-of-town. I have a separate userID on my laptop that is configured to look as much as possible like XP. The question is whether a Vista upgrade would work on top of an XP image that used a lot of older hardware.
View 4 Replies
View Related
Sep 21, 2009
I have an HP DV7 notebook that I recently added a second SATA 500 GB hard drive in the expansion bay. The purpose of the drive is to serve as a data drive. I also intend to store an image of my system disk on this internal expansion drive so that I can restore my system and apps when I am in the field. For most purposes the drive seems to be functioning normally. However, I recently noticed that, without my instructions, HP Updates were installing suipport files on my expansion disk rather than on my system disk and I have become concerned that Windows Updates may also end up on the expansion drive (so far they appear not to have done this). On further inspection in Computer Management - Disk Managment I discovered that when I put the expansion drive into the 2nd bay, my original system disk was automatically bumped from the Disk 0 position to the Disk 1 position and my expansion disk became the new Disk 0.
In Computer Managment - Disk Management the system currently looks like
Disk 0 - F: Expansion Drive - Healthy, Primary Partition
Disk 1 - C: - Healthy, System, Boot, Page File, Active, Crash Dump,Primary Partition.
If I physically pull out the F: drive from the machine the C: drive returns to the Disk 0 position. I am concerned that my system and application updates are going to get splattered across two drives when I want them to remain on the original C: drive. I can find no way in BIOS or Computer Management - Disk Management to assign the Disk and physically swapping the drives makes the system disk unbootable. Am I at risk of splattering my Window updates across two drives? Should I instruct Vista to regard my system disk C: as Disk 0 and how to I do this?
View 4 Replies
View Related
Feb 17, 2008
I've persuaded my boss that I need 16 gig of RAM. The purpose being, of course, to make Vista fly. Is a RAM disk the best way to do this? Can I 'cache' the system disk in a RAM disk? Or is there a better way to make use of my new endownment.
View 6 Replies
View Related
Jun 19, 2009
I was under the impression that it was possible to partition a hard disk via Disk Management. I want to split the existing C drive into two drives but when I right click the drive in Disk Management there is no option to do this. Is this not possible in Vista?
View 7 Replies
View Related
May 9, 2009
I changed the Boot sequence to CD first, then HDD. Everything ran fine and vista seemingly loaded perfectly. After moving some files from my backup drive back onto my main one and installing some drivers, I was asked to restart my computer (for the drivers) so I did. Remembering that the boot sequence was still set on CD first, and since my driver CD was still in the drive, I decided to set the boot sequence back to the way I had it with XP: HDD and then CD. After doing this I quit BIOS and tried to boot, but I kept getting a message saying: DISK BOOT FAILURE. INSERT SYSTEM DISK AND PRESS ENTER.
So I restarted the computer again, this time with my Vista CD in the drive, and again, the computer wouldn't boot and told me to enter a boot disk. Not knowing what to do, I went back into BIOS and changed the boot sequence back to CD first, then HD. After doing this, and restarting with the Vista CD in the drive, my computer booted up with no problems whatsoever. I tried reinstalling Vista (twice), reformatting the target hard drive, changing the boot sequence around, pretty much everything I could think of......
View 4 Replies
View Related
Jul 29, 2009
The other night I was in a rush and I held down the power button until it shut off. the next day I tryed turning it on and after the MB homepage came up for 3 secs on the top left hand corner of the screen it said "Disk boot failure, please insert boot disk and press enter" so i fooled around with the priority settings a little bit and nothing worked. I then inserted the windows vista CD and it would say "Loading windows files" then the loading bar came up and it would always freeze at the same point and after about a minute a blue screen came up saying a problem occured and is shutting off the computer to prevent further damage. Iv tryed everything. could my hard drive be damaged or something? Please someone help me. I cant work with much because i cant even get into windows! :-( All i can work with is the Setup menu
View 9 Replies
View Related
Feb 8, 2009
I have an external hard disk where I backup my files and system backups. Yesterday, I purchased a larger external hard disk and want to transfer everything to the new disk. The only command I have noticed is DISKCOPY which might do this. Will this copy everything from the source disk to destination disk? Will the Vista backup directories and shadow (backup) files be copied too? Is there any other tool (preferably freeware) that will do this for me?
View 9 Replies
View Related
Jul 29, 2009
When I had XP, I had a startup problem so I rebooted with a Windows XP CD that came with the computer. It fixed it.
I'm not sure if this is called a boot or recovery disk, or both.
I was hoping to make a similar disk for my new Vista (Gateway)computer but I'm not sure how to do it. I read something about an emergency thing that takes up 3 DVDs!
View 9 Replies
View Related
Jan 13, 2010
I attended a Microsoft event, and received a free copy of Windows Vista Ultimate Not For Resale.I had to visit a Microsoft site to obtain my key.The key is good for both 32-bit and 64-bit installs.I have the key, and I have the 32-bit install DVD.But I did not install the Vista 32-bit version on my machine.I installed a 64-bit version of Vista Ultimate using my provided key.All worked well for many months.But then my system started acting up.Games would not remember where they lift off, and Texas Hold'em quite
working entirely.And when SP2 came along and refused to load.I read all I could on the web, and came to the conclusion that I have a damaged system file.I need to do a repair install.Problem is, I have no 64-bit disk.And, I can't even remember how I did it, or what I used to load that original 64-bit version install.I looked all through my disks, and just can't find a 64-bit version nor can I find a place to download it from.Does anyone else have this problem? And can you tell me what I should do?
View 9 Replies
View Related
Dec 4, 2008
I have been noticed that there are not as many options in Disk Clean Up I disabled Hibernation so that would not be listed but what about memory dump does this only get listed if the computer BSODS and restarts?
View 5 Replies
View Related
Jun 18, 2008
i am writing after i have just installed the new service pack 2 for windows vista and am just trying to suggest that with the disk defragmenter, as there isnt a lot that has been changed like the only things that have been changed are that you can now select volums to defrag. one thing that may help with this is to put a small graph (or GUI) similar to the windows xp one on it and maybe a timer if possible so that people know how long it is going to roughly be until it finishes, and a report message say as again in the previous version telling what amount of fragmentation there is and what files are fragmented. also another thing that i have noticed with vista is that it takes up a lot of memory and if possible would there be any chance of trying to make sure that vista uses less memory so that it can be more responsive. These sugestions are from over the internet that people would like to see
This post is a suggestion for Microsoft, and Microsoft responds to the suggestions with the most votes. To vote for this suggestion, click the "I Agree" button in the message pane. If you do not see the button, follow this link to open the suggestion in the Microsoft Web-based Newsreader and then click "I Agree" in the message pane.
View 9 Replies
View Related
Oct 17, 2009
I need some advise on fixing windows Vista Ultimate 32bit on a Toshiba Satellite L305D-S5934 Laptop
The one year warranty expired and did not come with any disks according to my sister-in-law and all my computers still run XP. The problem seems to be that windows does not load, she told me that when the computer was turned on it was giving messages that some system files did not load. Missing or corrupted
It tries to fix the problem when you restart but it can’t, so I downloaded the recovery disk and I tried system restore but it says no previous restore points, the system was never baked up either
Can anything be done or does she have to buy new Vista disk and drivers from Toshiba?
View 4 Replies
View Related
Nov 22, 2008
I have Home Premium Vista, 64bit and 688GB hard drive(size when checking C: drive). I recently checked and it showed less than half full. Then a few days ago I tried saving a file and I got disk full message. I checked the c: drive again and it showed full- no space available, which should not be. I did a defrag, check disk and that did not work. I do remember seeing a warning around that time, but it vanished before I read it all. I think it said a file was not working or was corrupted and may have said something about "Catalyst". I found Catalyst Control Center on my computer, but that seems to be ATI card (graphics card?). I did delete a bunch of junk so it can now function, but latest check still shows only 72 MB available and that can't be.
View 4 Replies
View Related
Aug 12, 2009
I am on Windows Vista and office 2003 and 2007 and I cannot stop my computer hard disk from tinkling away, blue light flashing, when I first put it on, its as if it has a mind of its own. I have stopped it installing automatic updates, uninstalled a lot of the start up things in msconfig and it is still active for about 5 or 10 minutes and is nearly driving me mad. It makes booting up so slow and all the programs are bionic
to start. I wondered if its to do with Word making its thumnails (file searching) does anyone know how to stop this, or any other suggestions that it may be.
View 9 Replies
View Related
Mar 23, 2008
For some strange reason my disk defragmenter has stopped working! I run it as usual from the start menu, it requests permission to continue, which I give, and then nothing happens! I've done a search and several others seem to have this problem as well, but no one's provided a sollution!
View 9 Replies
View Related
