Could someone take their rime write us a tutorial on two topics? How to Rebuild a registry, and Backup and restore from DOS. For Vista. Im sure many could use this. All i found on google was that the reg is stored in System.dat And User.dat but it doesnt say what OS Version(s).
View 5 RepliesCCleaner registry utility deleted the registry keys for cd optical drivenow vista does not reister my cd and dvd drives.CCleaner does not have a backup facility so cannot restore.The key 4D36E965-E325-11CE-BFC1-08002BE10318 is missing.It is not in the registry.How can i get it back and get my drives working again?
View 4 Replies View RelatedA "friend" sat in front of my PC and tried to do me a favor, by running a "free" Registry fix software program. It took me a while to delete this program, but now I've discovered a problem. My Start menu now has missing items, for instance the Games category, no longer shows the games that once were there. I've looked for a restore point, prior to my "friends" intervention, but it does not exist. Is there a way to re-build the Start menu and restore it to it's previous existence?
View 5 Replies View RelatedI figured I'm gonna have many questions so I signed up. Here's my first one. I just purchased Uniblue's Registry Booster 2009. I ran a registry scan, and my system has over 300 errors. I'm trying to clean it but this application says "Your system settings prohibit you from doing a registry backup" when I click the "Clean registry button." How do I change those settings? Can someone give me detailed instructions on how to adjust system settings to enable registry backups?
View 7 Replies View RelatedThere is a link for activities on the Registry for XP and previous Windows, but I cannot find one for Vista. Will someone (with more knowhow than I) please advise me either what is the link, or tell me how to make a backup of the Registry. If I make a backup and then whilst removing unwanted files make a mistake, how do I activate the Backup? Will the activation of backup also restore the removed files?
View 9 Replies View RelatedI've been facing issues with backup / restore / system restore
View 7 Replies View RelatedTried backing up windows mail settings and restoring after a clean install. three methods, all the same results.
1 saving registry keys.
2. Windows backup.
3. Widows easy transfer.
Everything is fine but the signatures. They look grayed out and when I click on them Windows mail crashes immediately.
I know that few of you bother with Restore Points. It's something I play around with for the experience. But I have found out through two reinstalls and more BSODs than I can count that on "my" machine SP1, Auslogics reg. defrag and System Restore just don't play well together! The only way I could get my system to not crash on boot today was to start in safe, uninstall A.R.D. and restore to the only point I had left.
View 9 Replies View RelatedI backup up data to a remote Western Digital drive using the Vista Backup verything seems fine. I selected to backup all files on the "Back Up Files" menu except TV Shows, Compressed Files and Additional Files. My question is, If this hard drive dies and no longer lets me access it (which is what happened to my last XP computer) can I save registry and all other files that will let me restore to another hard drive with the least amount of hassle? Also is there anyway I can save profiles and passwords and the like. Ideally, I'd like to backup my entire hard drive and be able reinstall it to a new hard drive if this one dies. When my XP hard drive died I had my documents saved but had a real problem with this other information.
View 6 Replies View Relatedi, being a bit new to pc and being more comfortable with macs managed to mess up my machine so bad i had to re-install windows.
I am now wishing to restore one of my backups to restore my system to its original state.
When i go to the backup and restore section in the cp i am not able to restore from a backup and am told the bacup disk cannot be found.
I really need that backup cos i had all my music, photos, programs(i hope) in that backup.
1)I have Vista Ultimate 32bit and i use often the backup/restore computer to restore my computer. Is there any way to do this without using the vista cd? Like booting from partition or something?
2)Is my cpu is core 2 duo quad q6600 4cpus 64bit compatible? 3)Which os is better to install 32 0r 64bit?
How do i reset the restore points so as far as vista is concered no backups have ever been made on this machine, then i can try a restore by saying i made the backup on another pc, its the only way i can think of to let me restore my folder!
View 4 Replies View RelatedIn trying to restore old messages and newsgroups to a re-install of Windows Vista Mail, we have definitely done something to fowl up the application. We are having a lot of wierd problems, including connection issues to the newsgroups. As a result, how do we completely rebuild a new installation of Windows Vista Mail? Is there a way to delete the current install and then re-install a fresh copy of the application?
View 4 Replies View Related"I am running Vista 32bit. My PC has two hard disks and I backup to the second one driveD.I have had a problem that resulted in reloading Vista.When I now try to restore the backup it says "files made on a different computer - there are no backups on this computer".
View 9 Replies View RelatedI want to build a PC. I've browsed around the 'net looking for information on Complete PC Backup. The only thing that I've found on the 'net explains how to do a backup & restore. I've browsed around the Microsoft Vista discussion groups & found out that it is possible to do incremental (I wish that it would do differential instead of incremental backups.) as well as full backups.
Can I give the backup files names or does Windows? For example, before I install certain software can I give the backup a file name such as "before installijng XYZ software"? The way I understand it with incremental backups, the full backup has to be restored first & then the incremental backups are restored next starting with the oldest & proceeding to the latest. Since the Complete PC Backup does incremental backups, does the Restore wizard restore the incremental backups in order?
I have been placing my backup on an external USB 500GB drive. My computer with Windows Vista Ultimate melted down. I have been attempting to restore my documents from the USB Drive. I have restored some folders and now have 89,378 files mostly unrecognizable, such as: 7D6a3B81-0000DD52.nws. Isn't there a reasonable way to see the folders in the back up files so that one knows what to restore?
View 7 Replies View RelatedI just installed Family Tree Maker into my laptop that has Vista. Found a problem when I went to restore from the backup that was created using my desktop which created a .QIC backup file so it's not recognized. What can I do to recover these backups?
View 7 Replies View RelatedMy vista machine is in repair. Is there anyway to restore the vista backup to another laptop I use that runs XP?
View 4 Replies View RelatedI just recently got a new motherboard processor etc, and so i had to reinstall vista, well, i decided to go ahead and up to x64 so i backed up my hard drive under my current ultimate32bit and then formatted and installed ultimate64. So i thought i'd do a restore of my drive's backup, so i popped in my install disc, clicked repair comp, clicked restore a backup, chose the backup i wanted, confirmed, then a box popped that said basically, "The windows restore has failed. This backup can be restored on this computer. Please use the correct Windows Recovery Envirnment (x64) WinRE."
View 4 Replies View RelatedI just used Microsoft Backup for the first time. I have an external USB hard drive G: with 70GB free pace and 10GB already used. This was the first time I have run Backup START > CONTROL PANEL > BACKUP AND RESTORE I selected the option to backup everything. It ran for almost 80 minutes. I thought it was running because all the while, it was displaying the file that it was currently processing and then periodically, it would show the message writing to (G When it was finished, it wrote the following three lines
Last backup: 12/15/2009 9:49 PM
Next backup: 12/20/2009 11:00 PM
Where to save files: Local Disk (G So when I looked at G:, I could not find anything new. When I checked properties for G:, it was still 10GB used and 70GB free. Properties for (C were 30GB used 75GB free before and after backup. How can I tell if backup really happened? Did backup leave a log file?
I have a strange problem trying to account for the space usage on my disk. The disk capacity is 186 GB, and there is about 12.5 GB of available space. However, when I look at file sizes using ShowSize, TreeSize, or just manually looking at folder sizes in the explorer, I can only account for 99 GB of space. I have backup/restore turned off. Where's the rest of the disk space?
View 4 Replies View RelatedI recently downloaded a cleanup program that had good reviews from download.com. After using it, I saw that most of my programs in Accessories folder have disappeared!! For example, the System Tools folder is there but Cleanup and Defragmentar are not there, similarly, I have lost Calculator and many other programs. Besides, I somehow cannot use the backup restore that came with the cleanup program. I have uninstalled the cleanup program but how to get my accessories programs back? I am using Windows Vista Home Premium 32bit.
View 4 Replies View RelatedRunning Vista Home 64 going to upgrade to 7 professional. I understand that I will have to reinstall everything. My question is if I am using the vista backup and restore once I have completed the 7 install will I be able to restore my files with 7 even though it was originally backup up with vista or do I need to manually copy all my files onto an external drive instead of relying on the vista backup?
View 4 Replies View RelatedA new machine, VGN CR220E, Vista Home Premium. As common, today, no Backup / restore disks.(or any other software and/or manual) I was told one can make one (CD-ROM or DVD I'll like to. Also, I don't see Outlook Express.
View 4 Replies View RelatedI'm operating Vista Ultimate x64 on an HP Tx2 Touchsmart. (The 3rd one.)I've had the Touchsmart for a month and the case broke - so before I swapped it out at Best Buy I went over to the Backup and Recovery area of Vista and made a full restore on to an external hard drive. The folder "WindowsImageBackup" now exists on my G: external drive. I go swap out the two machines, come home and try and get Backup Status and Configuration to recognize the G: drive backup - it finds the drive, not the backup. I get to the point where it searches for a backup to restore - but it won't see anything there. I can see it, but apparently Windows can't. Besides cuss at HP for making a machine I had to return twice because of hardware issues. It's a sweet little tablet (multi-touch) but I've got some lemons right off the rack. Don't let me down Vista community!
View 4 Replies View RelatedIf I download Macrium Reflect and backup my OS (Vista), will I be able to restore the entire OS back to Vista, after trying Windows 7, but prefer Vista?
View 4 Replies View RelatedDoes the complete pc backup compress the files..like say 20 GB on two 4.7 disks or is it linear like 5 4.7 disks for 20 GB? And I don't know why but if I do a complete backup and then try to boot off the disks and press enter it doesn't recognize the disk and just boots up normally.
View 7 Replies View RelatedI have a HP Pavillion M8150N with a quad core 2.4, (2)320 drives, upgraded to 4gbram (that was a waste) ... and ... its a great machine. I bought it 18 months ago and it fixed every problem I had with my old celeron 1.7 machine. I bought a project pavillion M9040N desktop box with no hard drives. I bought an HP Restore Disc and moved my (1) unused 320 SATA drive from my 8150 to the other machine ... and expected to just restore vista and have a backup machine.
It wasn't quite that easy. After (20) tries, I <powered on>, <hit F10>, entered the setup program and made the HD the first device, made the CD the 3rd device, made the HD the first boot device, and set it to display the parameters as it loaded. I dont know if I said that right.....
I am working with a PC that has account and password issues so the user is blocked from accessing his files. I have tried Orphcrack on the system but it's not showing any passwords. The user tells me the system has been acting odd for some time now and - of course - he does not have a backup and to make it worse his tax information is on the system so he had to file an extension to get time for me to do this recovery and restore. I need to pull his files from the system to wipe, perform a clean install, setup his account and restore his files.
View 4 Replies View RelatedI have successfully used my Vista installation DVD to backup and restore Complete PC many times. But yesterday, it suddenly stopped booting and no longer prompts me to "Press any key to boot Vista from the installation CD/DVD". Other computers boot fine from this DVD, so it's not faulty. The only changes to the system configuration since the last successful boot from the DVD (literally the night before):
1. Automatic Security Update for Microsoft XML Core Services 4.0 Service Pack 2 (KB936181)
2. Automatic Update for Windows Vista (KB947562)
3. Changed location of Documents, Videos, Music, Pictures to USB HDD, and then reverted back to defaults.
I have an Acer notebook with Vista SP2 oem . I intend to upgrade the internal drive from 80 to 500 GB but as the machine came with an early version of Vista home premium pre-installed I do not have a Vista cd to reinstall the os only a recovery dvd. I have a free version of Macrium reflect that I use to make an image of the comlete C: drive. Is it possible to swap hard drives and copy this image to the new hard drive without any prior formatting or os loaded on it.
View 6 Replies View Related