I installed the HD Realtek Driver (rebooted) and went to set it as Default, but can't find it. It's definitely installed... see... So, I went to CP > Sounds > Recording .. and made sure to look for Hidden Devices.. so I could set it as Default. Not there! Remember (way back when), when it used to look like this?? This is what I'm trying to do in Vista.....
View 4 RepliesI have a Fujitsu Siemens Amilo Pi1505 laptop with Windows Vista 32 bit home premium installed. When I got the laptop there was an icon in the system tray near to the clock which when you clicked on it opened up a nice looking graphic from which you could alter the realtek sound settings and choose things such as concert speech room etc. It had graphics depicting speakers and other things.
That has now completely disappeared and I cannot seem to get it back or find it anywhere on my computer. It made making adjustments to the sound settings so much easier and I miss not having it. Is there anyway to restore it back so that I can alter my sound settings more easily
I'm using the realtek HD audio, when i plug my headphone or my speaker they work fine but i tried to mess with a microphone and i can't open the realtek manager, i can't even find it anywhere actually. I'm using windows vista home premium 32bit. I tried the new drivers, tried uninstalling and everything else. Is there something that i'm missing here? I can't seem to make the mic work w/o the manager apparently. On the device manager the Realtek high def audio shows this version 6.0.6000.16386. I tried download the 2.31 on the realtek website, to no avail.
View 10 Replies View RelatedMy PC has two hard drives. Windows gave me the option on boot up of proceeding with either Windows XP or Windows Vista home basic which worked fine. I then Ultimate 32 bit over the XP installation and again all seemed ok. However, the other morning I switched on the pc and got the dreaded Bootmgr is missing message. I have tried fixing using the vista disc but when it says select the OS to repair nothing is showing. If i click next and then choose the repair option it goes through the process and then you reboot but the problem still remains. I have also tried the command prompt options but they make no difference either. The Bios recognises both my hard drives are there ok.
View 6 Replies View Relatedhow do i take screenshots and WHERe are they located once they are taken?
View 8 Replies View RelatedIt didn't take long this time, either. Earlier this week, testers received alpha builds of Office 14, the codename for the successor to Office 2007. One tester from Russian site wzor.net has now leaked the screenshots of the applications included in the productivity suite. While he didn't screenshot every application individually, we do now know that the list includes: Access 14, Excel 14, Groove 14, InfoPath Designer 14, InfoPath Filler 14, InterConnect 14, OneNote 14, Outlook 14, PowerPoint 14, Project 14, Publisher 14, SharePoint Designer 14, Visio 14, and Word 14. Full Story: Leaked: First Office 14 screenshots
View 9 Replies View RelatedThe first screenshots of Morro have leaked, showing an interface very similar to the one from Windows Defender.
View 9 Replies View Relateddo somebody know something about windows seven? a download link or screenshots or a featurelist?
View 9 Replies View RelatedWindows 7 build 7600 and Windows Server 2008 R2 build 7600 screenshots have started to appear and the build is reportedly in the wild.
View 5 Replies View RelatedMy vista keeps locking up after various amounts of time, no matter whether its just idling, or im making the computer work hard. As ive read on other topics, I think its a driver issue, but I just dont know what to do. I will try another fresh vista install tomorrow and get the vista updates quickly to see whether that helps the situation. I have ensured it isnt overheating like it did initially when I bought the system, and it is now a safe and low temperature in a running state. Also, it only detects 3.5Gb of the 4Gb of RAM I have in my system. PC Spec:
Ive re-installed, windows, and it froze after I installed the chipset driver. I contiuned, and found a sound driver wasnt digitally signed. However it still crashes. I have got the latest drivers for it. For it to crash, all i did was open recycle bin, from idle state.
I shouldn't be surprised but here goes....I checked today for SP1 on windows update.. According to my computer no updates available however updates were last installed on 03/13/08 and yet when you look at installed updates it shows a windows defender update installed today. I have been reading several posts on this problem and have noticed that Carey Frisch posted a link to troubleshoot and now here is a problem and that is none of these apply to me... Once again Go figure!! Running Vista Business 32bit here in the good old USA and of course the English versionVista is and has always been updated right on schedule....
View 9 Replies View Relatedlet me start this nightmare story i had just done a fresh restalled and spent hours on getting everything installed on pc all was fine working perfectly untill that is i installed vista service pack 1 from windows updates the update process crashed halfway through so i had the only option to restart my pc then came the blue screen of death and it metioned if you have any new hardware installed make sure all drivers are installed etc etc of course i know it wasnt hardware it was because of me restating my pc half way threw the service pack 1 and the full files not been installed threw the update process crashed was the reason for the blue screen but the blue screen had notes advising me to clear shadow memory in the bois and any other memory so i stupidly assumed this was channel mapping and bank mapping and put them all to zero please see jpeg of what i changed i basically disabled everything that was enabled and put all the mapping channels and bank channels to zero and now when i switch on my laptop i get a blank screen with no post no ...........
View 9 Replies View RelatedComputer Model:a6200n
Yesterday afternoon some guy was moving the wires behind my computer to make space to pass by and move out the couch... then my computer shut off
I reconnected my computer and i know everything is correctly plugged in but my audio isn't working i can't hear a thing.
I am on Vista Home premium
And I'm using Realtek High Definition Audio
When i check the Sound settings everything is High and maxed out nothing is on mute and it shows that my speakers are emitting noise.
After installing SP2 I noticed that Windows had replaced my Realtek HD Audio driver with its own older version. It also now appears twice in the Device Manager; I can remove one of them with no ill effects but it is redetected at next boot and reinstalled. So I removed both of them, installed the latest Realtek driver and rebooted. Now I still have two instances - one (called Realtek High Definition Audio) with the Realtek driver and the other (simply called High Definition Audio Device) with the Microsoft drivers. If I force the Microsoft one to use the Realtek drivers it crashes horribly with a BSoD (so I won't be doing that again!).
Once again I can remove the Microsoft one with no ill effects but it's redetected and installed again on the next boot.Something in my memory tells me I always had two entries under 'Sound, Video and game controllers' but the second one wasn't called "High Definition Audio Device" and the Driver Provider was Realtek, not Microsoft. Trouble is, I can't remember what it was called, or what it was for. I could always do a System Restore to pre-SP2 and find out that way but it's probably worth finding out here first whether I'm worrying about nothing or not. It seems I've got two components of the same chip with drivers from different releases.
I can't get the the audio to work (at all) on Vista x64. I went from XP to Windows 7 that didn't work out because I couldn't find any audio drivers that worked. So I decided to switch to Vista for the time being, same thing no audio. I've tried installing the chipset and several versions of the audio drivers (RealTek). I've checked device manager and it detects it and shows it's working fine (even get the green bars when music plays).
View 8 Replies View RelatedI upgraded my Vista. Now every time I visit the control panel I get a message saying that "The audio driver on your system is not designed for Windows Vista. Please visit the website of your computer manufacturer or Realtek to download the audio driver for WindowsVista. Can this be for real? When I view the realtek site I don't see what I should be looking for.
View 6 Replies View RelatedI have a GA-73PVM-S2H motherboard with onboard Realtek HD Audio. I have a 2.1 speaker set up which has two small front speakers and one subwoofer. Until last night I had a Guitarport which is a kinda external sound card which i use for playing the guitar (its pretty cool). Anyway, i took this out and plugged the speaker lead back into my PC but since then i cannot get any sound out of the speakers. When i look at the Realtek Panel and get it to look like my set up, when i do the test thing on the speakers NO sound comes out at all. However, when i set it up to have REAR speakers i can hear the test sound but it comes out of the front speakers and when i play an MP3 i can hear the music REALLY QUIET as if it is the sound that would normally be coming out of the rear speakers which i do not have. It sounded to me like i had connected the speakers up incorrectly but there is only one lead and it is definately in the right 'hole' and i tried it in all the other 'holes' too but still not working.
View 8 Replies View RelatedMy computer has Realtek HD Audio Manager installed on it as the main audio manager. I have 4 speakers plus a subwoofer, so I set it as 5.1 speakers and unchecked the button for a center speaker in the manager so that it won't make my sub act as a center. However, on the back of my desktop, the jack for the sub is also the jack for the center speaker. So, whenever I listen to my music, it won't use my sub, but if I check the option for having a center speaker, it tries to make my sub act as a center speaker, which makes it sound awful.
View 6 Replies View Relatedfirstly, apologies for not so great english and especially for not being very computer savvy. my issue is that the audio fades in and out of hp pavilion a6010n desktop pc, windows vista home premium, sp1, 32-bit os. i always use headphones plugged directly into the front of the tower, and my lcd monitor has built-in panel speakers. this problem has been constant since i purchased the pc in august of 2007, but will resolve itself periodically sometimes for a few weeks or even a few months.
i have noticed that it most often happens upon start up and even often affects the boot up windows noises. then, if i open windows media player or anything else with audio (Internet videos, yahoo! news videos, etc.) the sound in my headphones will fade in and out from one ear to the other - usually (but not always) it is the left ear that loses audio, but lately both have done this. this will happen immediately after starting up, then usually reslove itself after anywhere from 10 minutes to an hour - then all will work well again...........
I bought a new computer with this configuration:INTEL G31/1600Mhz/asrock Intel® Dual-Core E5200-2.53GHZ-2MB-800FSB/45Nm Memory 2 GB Kingston onboard Sound card: Realtek High Definition Audio I installed Windows Vista Business x32 bit and everything is working properly except the sound card, I can hear music but it sounds so bad. I have 2 front and 2 rear speakers that worked great with my old computer (also with onboard realtek sound card) so I guess the speakers are not the problem. Let me tell you exactely how the sound sounds like.
I put Madonna, Fever song (which is a good one..)(MP3) and I bearly hear her voice... when her background vocals start screaming I can hear them bettter the the main vocal. It's like the front speakers and the rare swithced, but they didn't - from the Realtewk Audio Manager when I test the sound everything is ok.. I mean the front sound comes from the front speakers and the rare sound from the rare ones. I also tried to change the speaker configuration from 5.1 speakers to stereo and to quadraphonic but the sound is the same - only background voices!
I'm sure this has been dealt with, but I had my realtek HD installed perfectly fine and I deleted tunebite because I don't use it anymore and what do you know, my sound claims to be installed but when I open volume mixer it says no audio is detected. Does this mean I should try an OS reinstall? I tried three different realtek drivers and none have solved the problem.
View 5 Replies View RelatedIn my status bar, pop ups continued to pop up, stating that i just unplugged a device from the driver, then it would tell me i plugged it back in, all the time doing nothing remotely close to these insane accusations, i continued without really worrying about it. until i actually lost my sound, and it went crazy with those pop ups. so i uninstalled the driver, reboot, installed new driver from realtek, and it worked for like 4 hours, then no sound again. uninstalled driver, reboot, install, reboot, no sound, and i am apparently continuously unplugging the jack like a madman. so, another uninstall, reboot, but this time i install the driver from the cd i got with my pc (dell inspiron 530s-120b)......................
View 4 Replies View RelatedAlright, i had a problem trying to Enable realtek audio from the Sound Hardware list from Control panel. After an hour of hunting and freaking out constantly, I found a solution that was looking at me in the face the whole time, I feel kinda stupid.
To Fix - Goto Start > Control Panel > Hardware and Sound > Sound > Right click anywhere in this screen > Show disabled devices > Left-click speakers > properties > Device Usage > Enable.
I lost sound to my pc a while back. Finally had time to sort it out. It was showing realteck speakers not plugged in - they are within the pc, so I tried unplugging things and rebooting to no effect. I then tried disabling and restarting, only problem is I can't work out how to enable them. The files are there, but when I go into control panel sound and manage audio devices it says there aren't any.
View 9 Replies View RelatedI use an on board NIC card that comes with my Gigabyte MoBo, which is fine. My Question is:: How do I adjust these Advanced Setting for Maximum Performance. Speed, I want my Connection as Fast as Possible and have NO clue HOW TO SET these Advanced Setting shown here:
View 9 Replies View RelatedIt successfully unabled my previous version, and conveniently failedto install the new version. My PC is now deaf.How can I undo this unstall, or better, how can I find the download site?It is now impossible to go to the download site thru Vista forum. (and why
is that?)
And other sites try to sell this stupid Driver Detective software and not the Realtek update.
where I can download Realtek new version,or else, tell me how to undo the uninstall I did.
Is there a way to delete "failed install of updates" I have the most updated version of the driver. it installed a few times B4; now it won't, error code states already installed or not compatible
View 5 Replies View RelatedI have Realtek high definition audio onboard with one coaxial and one optical digital out. I have the newest driver. I need to connect PC with Panasonic AV Receiver via digital connection. When I use coaxial connection, sound works fine BUT sound is too silent! I have Sony DVD player with coaxial digital output too. If I use subjective for example 1-10 "scale", build-in RDS tuner (in AV receiver) has subjective volume 10, sound from CD inserted in DVD player has the same subjective volume 10 and sound from PC connected via coaxial digi has subjective volume 5. Only volume control i have in Windows is set to max!
View 7 Replies View RelatedMy System is in my sig. My 1y old Toshiba laptop w/Vista, using Realtek sound driver version, 6.0.1.5322. I had the left speaker go out. I ran through all system diagnostics. I checked for updates and found I have the latest driver. I then pulled the keyboard and disconnected both speaker leads from the board. Connecting the left speaker lead to the right board plug in, the speaker dose work. I then connected the right speaker lead to the left board plug in, and got no sound. FYI when I plug in the head phones only the right side works as well. My question is, based on information currently out there, is it likely I have an issue with the board or is there a known issue with the driver that would cause sound to go out on one side?
View 7 Replies View RelatedI just Upgraded mobo and processor and after much much much hassel, managed to get everytrhing working. For some reason, this new mobo wouldn't allow an install of an older version of XP, only new versions with sp2. My legit copy was an older version and wouldn't install right, but that's not the topic here. My new mobo comes with integrated Realtek ALC888S sound. 7.1 High Def with an hdmi output. I believe it's 24-bit sound and the specs on it look decent. I also have a SB Live! 24-bit card I've been using prior to new mobo. how do the two compare? Am I better off sticking to my SB Live! 24-bit card, or trying out the new Realtek?
SB = 5.1, RT= 7.1
SB = 24-bit, RT = 24-bit too?
SB = no hdmi, RT = hdmi
SB has eax support. does RT? RT is High Def, is SB?
I'm getting no sound out of my speakers(2.1), when I plug them into the green jack on the rear panel it says that I have plugged in the pink and black jacks, but neither of those are plugged in. I've spent hours on the phone with HP and looking on the internet but i can't find any solutions. I've updated every possible driver. Every now and then I can somehow get sound by messing with settings and restarting or doing a power drain or a million other things, but as soon as I restart the computer they aren't working again, and the same solution never seems to work twice. Also, when the sound does work, it still says the black and pink are plugged in.
View 4 Replies View Related