When using Fax and Scan program in Vista Ultimate, the contact list (when selecting a new fax) does not show the fax numbers available, only email addresses. I recently added a new harddrive and reinstalled Ultimate, but no changes other than the hd swap were done, I remember prior to the change the fax numbers would show in my contact list, but now they do not.
I have a genuine copy of Vista Ultimate 32 bit which I received at a Microsoft presentation when Vista was launched. Shortly after I purchased a new computer and the supplier loaded Vista Ultimate at the factory and used my key number to install and activate what may have been an OEM version. I understand Windows Fax and Scan may not be in an OEM version. My problem is that I can not find Windows Fax and Scan on my computer and wonder can I install from the Windows Disk?
Have a web site (portal if you will) that i log into to get files etc from the office..it uses NT Challeng response for authentication once you hit the URL. Under XP it brings up the user id and password which lets me in..Vista on the other hand alos brings up the login dialog but just never gets authenticated. I suspect it's Vista given XP and IE7 works...anyone any thoughts? I've removed all firewalls etc to see what happens without them but to no avail...
Below is a list of software I have purchased, but am not using so I thought if anyone is interested in using any of the belowmentioned programs, send me a Private Message and I will provide you with my Serial/Activation Number/s.
Ace Utilities Acala DVD Copy CleanMyPC Registry Cleaner ConvertXtoDVD CyberLink DVD Suite 5 CyberLink Power2Go 5.5 CyberLink PowerDirector 6 CyberLink PowerDVD SE for Vista
I have some old hardware with an RS232 (9 pin) connection to my notebook. I have downloaded a driver for the Serial to USB converter, and my Vista Enterprise OS seems happy with it. However, the hardware only allows communication with COM ports 1 to 4, and as far as I can judge my USB ports are 8, 9 and 10. Can I renumber these ports to make communication possible, or is there another way of doing this?
I have recently installed Vista on my comps(2). I installed the first comp sans the Validation number and ran it for two days to confirm all was OK. I then validated it and decided to install to the second comp. I validated this setup (different number )and later found that I was getting probs. (eventually tracked it down to the battery in the wireless mouse being low on power). I reinstalled Vista perfectly then validated, ollowed by all the updates. ( I now have Windows.old using up disk space and am somewhat doubtful about removing it ).
I have Googled the following: How do I check my Vista validation? All I get is how to cheat the WGA with some crack! So, can some kind person tell me how to check on the comp where I look for the Validation number.
just for future reference. I got the 'Windows - No Disk' dialog with hex numbers yesterday. It happened with CodeBlocks whenever I would open a project. I cleared my 'recent items' list and that fixed it. There was a file in the list that was on a memory card. The memory card was removed. I guess that was the problem... weirdness
how I can print some e-mails without having to print a company logo that appears within the e-mail. I would also like to be able to dispense with the date at the bottom of the page that appears when the e-mail is printed.
I have vista 32 and I just purchased a cell phone Samsung M8800 Pixon. I plug it into my USB port using the sync cable and it doesn't do anything, no found new hardware no nothing. The only thing it does is it will use the power from the USB port to charge the phone and it shows that on my phone. Why isnt my usb pot recognizing new hardware when I plug into it?
I tried to phone you today to invite you to a breakfast this Sunday 10:30 am at Ely's Restaurant. Seems like the number I have for you has been disconnected. Are you interested in joining us?
I got windows vista ultimate 64 bit as a free gift from microsoft a while back for doing the windows feedback panel program. I am having the "product key already in use" problem, and they tell me on the phone they want me to pay $60 to talk to someone for help
Edit: I just had to call back and talk to someone else who actually knew what they were doing and they activated it for me! So um.. if anyone has this problem, make sure you try twice
I have Vista 64bit with a Contacts folder which seems to be totaly impotent as far as exporting. According to the Vista Help it should be possible, but I do not have the Export button! Anyway, all I want to do is to synch my Vista contacts with the Contacts in my phone running Windows Mobile 6.1.
What Microsoft suggests is to buy Outlook, import the contacts into it from the Vista Contacts folder, and upload them into the phone. I tried it with trial Outlook and it works. But I don't need Outlook for anything else, and don't want to buy it. Is there a workaround?
When I dial a number, I have to include 1 and the area code, which I have set in the rules. I'm having a problem where the Vista phone dialer is dropping the last two numbers of the area code (i.e.818-555-5555 dials as 1-8-555-5555 instead of the correct way 1-818-555-5555.
My computer will be on, but not online, and my home phone will ring and after the second ring my computer modem starts reacting like a fax modem and starts ringing and then says your call did not go through please try again. What can I do to stop this from happening? My modem is just automatically reacting after the second ring and I don't want this. I am using Windows Vista Home Premium.
We purchased a Acer 7520-5185 that came with Vista. We are a Telecommunications company and all our phone software run on XP. They will not run on Vista. We contacted Acer, but they will not help us they say they only support the hardware with Vista. We need to get XP on our computer. We paid a guy $400 to do this and use our XP disk from old computer, but after about 2 hours all he did was load Parallels Workstation and this does not allow some of our USB ports to work nor does it allow our modem to work at all. Is there some way to load XP directly on our Hard Drive (get rid of vista) and get the drivers for all our hardware to work.
When ever i am on my laptop or playing my ps3 and my house phone rings i instantly lose my connection. Both of these things are connected via Router (Wirelessly). So today I decided to call comcast (I have Comcast High Speed Internet) so when i called them they said that I needed a booster and that they would send a technition to hook it up. But is this really what i need?, is there anything i can do besides getting a booster? And what would this booster do?
Under the phone dialing properties i have my local area code just the way it was in XP but when dialing, the prefix area code get "truncated" by vista. See the example below; When i dial 240-555-1234, the dialer tries to dial it as 1 2 555-1234, same thing for any other area code i attempt to dial.I've searched and it seems to be a known issue but haven't found any solution yet...has anyone been able to solve this?
I have certain client software for my phone system that will install in Vista but won't work. is there a way i can run it in a virtual xp session inside of vista?
Have had difficulty installing Sony Ericson software onto my PC. They have been no help so thought id post here and see if anyone had a similar prob witha different program. Install seems to go fine. Progress bar reaches 100 % but then reverses back down to zero. Have uninstalled the program. Deleted it and cleaned the registry with Regvac. Not all the Sony keys can be removed. Are there some as standard within the registry. Is this the problem? My system is fully updated with windows update
New PC, new user of Vista...Intermittent sound from PC speaker & SKYPE phone; now only phone....Not even close, as a techie...'Device Mgr's:...Realtek High Def. Audio & Philips VOIP080..I noticed this a.m., Philips VOIP080 has taken over...Necessary to have two Mgr's? I'm not sure what other info you need..
I have an LG VX7000 cell phone and Verizon Wireless Mobile Office Kit VERKULG7000 (USB to cell phone cable and software and drivers for 98SE, 2000, ME and XP. I currently use my cell phone on occasion on my HP ZE5470US notebook computer running Windows XP Pro SP3. I have no trouble using the 3G connection or FAX/Modem connection with the cell connected to any USB port on the computer.
I just bought an HP DV9830US running Vista 64bit SP1. I plugged my cell phone to the cable and the cable into the USB port and Windows Vista can not configure the phone as a modem. This is a huge problem for me since I occasionally need connectivity when free WiFi or other internet/phone connection is not available.
I have been in contact with LG tech support and they say that the cell phone may not be compatable with Vista. LG suggested contacting Verizon Wireless. I contacted Verizon Wireless today and they said that they have had an incredible amount of issues with all of their hardware and software (especially music) related to Vista. Their tech and sales department were not really sure which direction to point me in. Of course, they wanted to sell a phone with internet connectivity built in, which does not help me one bit......
I can't get the drivers to install on vista for my new motorola cell phone, so I can import music to the phone. I already tried going to motorola's website and downloaded a newer version of the software, it still doesnt work.
The phone will not connect to the computer. Its a motorola v3m phone from verizon wireless. Any one else seen this problem? have a fix?
I have an issue with a custom TSP written in C++. It should be used by outlook to make a call. It works fine under windows xp, but under Vista it doesn't. I am not sure which is the problem because I am able to add it in the Advanced tab from Phone and Modem options and I am able to select it from the New Call dialog from Outlook to use it as a line. When I press Start call i receive an error "An internal error occurred in the automatic phone dialer. Close the dial phone box and then open it again". Also, using the dialer.exe application from microsoft I am unable to use it. The following error shows: "An internal error occured in Phone Dialer. Quit and restart Phone Dialer."
Have had difficulty installing Sony Ericson software onto my PC. They have been no help so thought id post here and see if anyone had a similar prob witha different program. Install seems to go fine. Progress bar reaches 100 % but then reverses back down to zero. Have uninstalled the program. Deleted it and cleaned the registry with Regvac. Not all the Sony keys can be removed. Are there some as standard within the registry. Is this the problem? My system is fully updated with windows update
I have Vista Ultimate with the Fax/Scan feature. Does this mean I can scan a document and then fax through the program? Also, with regard to the phone line, if I am understanding the setup, I just run the line in to my fax modem then out to my phone? Vista will then dial a fax number and send it without the need for a dedicated phone line?
Problem: sfc/scannow stops at 76 %, gives no Info just that it can not perform the requested operation
it started when I Restored the System to Factory Install with the Discs ( 2 Discs) sent to me by Acer by mail SP 1 is already on the Discs, all Updates installed successfully, including SP 2 Event Viewer shows some Errors but don't know witch are associated with the sfc/scannow
Problem Reports and Solution (reports but no solution found)
1.- Problem signature Problem Event Name:WindowsWcpOtherFailure3 OsVersion:6.0.6001.18000:1 File:basewcpsilmergedtutsystem.cpp Function:Windows::Rtl::SystemImplementation:irectFileSystemProvider::SysReadFileLine:1920 Status:c0000011 StackHash:0x563c8df4 OS Version:6.0.6001.2.1.0.768.3 Locale ID:1033
2.- Extra information about the problem Bucket ID:182505946 Problem signature Problem Event Name:CbsPackageServicingFailure Stack Version:6.0.6001.18000 Package:Package_for_KB973687~31bf3856ad364e35~x86~~6.0.1.1 Status:80070026 Failure Source:Execute Start State:Resolved Target State:Installed OS Version:6.0.6001.2.1.0.768.3 Locale ID:1033
Extra information about the problem Bucket ID:769551469
I suspect that its related to the CBsPackageServicingFailure or both or more don't know where to go from here would really like to get sfc/scannow working Email with Acer America this Computer is still under Factory Warranty don't know what it covers, but they DON'T want me to return it to Store in Winnipeg where I purchased it don't know if I been screwed, this computer (LapTop) does Not have a Recovery partition, it has 1 disc C and 1 partition 232 GB (my Emachine Home Basic Desktop did have a Recovery Partition on D) the Store made me set, 2 Discs after I complained and Acer sent me a set, 3.
Discs after some Emails already been at the store they are slick and have few answers , don't think I'll get far at the store.
i have vista SP1 premium 64bit and when i put in call of duty 4 or demigods (both pc games) it sounds like theyre running, but then they stop all of a sudden i want to install it and play, theres no scratches on the games and theyre both brand new