On Starte Up Computer Makes Noises Like Working But Nothing Happens
Apr 3, 2010
My computer is a desktop HP Pavilion with Windows Vista (64-bit). When I turn the computer on the light that says is on goes on and the computer makes noises like is working but nothing happens, it's like the computer is off. That happened for a week then it really went on and I was able to use it like nothing happened. A week later the same thing happened, I wasn't able to used it for a week. Then a week later again I was able used it, and is been happening that for a month now. I ran my anti-virus but it didn't find anything.
Usually when I'm playing games, I play with my wired XBOX 360 controller, anyways...its plugged into my front usb port. So while im playing, after 10 min. the PC starts to make noise (humming noise). So i was wondering if theres anything wrong with the controller or the PC (because when i plug in my ipod to recharge for 1 hr it doesnt make humming noise even once). Plz i need a solution and thx.
Before i had vista With XP my comp never use to over heat use to stay 36?? celsius or lower Now since i got XP my comp runs at 39?? celsius or higher and my comp freezes when it hits 40 or higher is there any way that i can switch back to XP? or anyway to fix the prob non-money wise?
Sorry if this is the wrong section but, sometimes when im just on the computer my computer will make a noise. I really dont know how to describe the noise but its like when the fan in your room is turned to like extra fast. Whenever the noise comes my computer just starts to lag.
Sometimes there are loud clicking noises and the computer is generally loud when it starts up or whilst it's on. The computer will crash on occasions and won't start back up. I am thinking it is a problem with the hard disk as when it doesn't switch on, it is as if the computer cannot locate it. It is persistently crashing and not starting up and the noises are constant. What should I do?
I have been searching far and wide for a solution to my networking problem. I have 2 computers that i connect directly to each other by ethernet cable. Both computers also connect to the internet via wifi. So, on each computer, I have my Wireless connection, and the 'unidentified network' link between the two computers. The problem is that the 'unidentified network' settings never save, so when ever i restart either of the computers, I have to make the unidentified network private again, and there is no way that i can see to actually save the unidentified network settings in a profile. Also, to prevent the computer to computer connection from broadcasting over the wifi connection, i have to disconnect the wireless from one of the computers. I have tried making the wifi a public network and the ethernet connection private, but it never seems to work. anyone out there know what i can do?
my issue is while playing ET:QW my sound cuts in and out? only when gaming on a server. i have installed all the latest drivers for everything-- all 64BIT drivers.. so i am at a loss why my sound cuts out.
When I burn a data DVD using the right click - sent to d: my system laggs really bad.
My specs are AMD Athlon 64 X2 5000+ (2.6GHz dual core) 3gb DDR2 ram nForce 430 chipset geForce 6150SE (256mb dedicated and 1100mb shared) DVD multi drive all drivers are the latest x64 versions Windows Vista Home Premium x64 SP2 (up to date on all updates)
I'm using DVD+RW disks....
Is this normal.I mean my entire computer was lagging BAD and this is a fresh install of Vista (just switched from x86 to x64 a few daysago). None of my resources are being hogged up or anything like that page file was at about 1.5gb, 35% memory usage (out of 3gigs),processor usage was at about 10%.
Why am I lagging so bad when burning a DVD? Any other time, the computer is extremely fast.but while burning it took almost an entire minute to open up firefox.
He really must be stoned because earlier today he said that he makes more than $14,000 a week. In his dreams. If I made more than $14,000 a week, this would be the last place I would park my ass every day. I would be on a tropical island with five 23 year old BABES serving me drinks all day long while I lay in the sun on the beach.
Alias has to scam little old ladies out of their hard earned money to purchase Ubuntu and everyone knows that Ubuntu is free but NOBODY wants it. Imagine, Ubuntu is free and is still on less than one percent of the desktops out there. That should tell you all you need to know about that piece of crap OS.
If you're interested in solving a severe Java bug that makes IE7 crash when its DEP feature is enabled (as Admin, only to enable it: Tools>Internet [URL]
I have a problem with Aero, where some of the programs I run (iTunes for example) will be fuzzy! If I disable Aero, it goes back to crystal clear.
I have an NVidia 9800GT and 6GB of ram.
I would not have even known there was a problem had I not downloaded iTunes, since all of my other programs look great! I'm fairly new to this forum thing, so please let me know if there is any additional information that is needed.
Whenever i try to download anything it just make a little beeping noise when the downloading is done and then when i go to check where my program is it's gone,
On a fresh install of vista ultimate x86 if i increase my half-open TCP connections ,then on restart my PC freezes on the first black bootscreen & then BSOD Utorrent was killing my browser(firefox) so ive tried to patch the TCP connections again & again , same sad outcome - Unbootable PC. Ive just built it Abit AN52,Ath6400,2GB OCZ800,2xWD500GB AAK,Hitachi160GB S,8600GT ,Pioneer212 ,650W PSU.
Today ive installed Vista Ultimate x64 & im having no problem browsing with Utorrent running but im not used to a 64 bit OS, if i have any problems id like to return to x32 & keep my torrent client why something so small as to open more internet connections would kill my PC.
IObit Game Booster 1.1 - TechSpot Downloads. Very rarely do I find little free apps that actually do anything useful, but this app closes down all 2000, xp and vista processes not needed during gaming. I got an extra 7fps in Far Cry2 small ranch very high benchmark. That's the same increase as overclocking from 3.16 to 3.8 on my Vista 64 x48 e8500 with gtx280. You probably all know about it already, but I only found it recently.
Recently I had a crash while I was playing a game, so I rebooted manually because I had too. From that time, when Vista boots, my harddisk makes a weird loud noice everytime before entering loginscreen and my boottime is extended with +-20sec. I've figured out myself that since the crash ,I watched a startup log and saw that Vista does a quick chkdisk, which would explain the extra noise my HD does just before booting. I've tried everything , from checking for a dirty-bit , disabling autochkddk to even formating my system. But every time my system crashes, the next time it boots , my HD makes a weird noise.
After the rolling green bars of starting up vista, the hard drive makes alot of noise (lots of disk activity?), vista takes 5-10 seconds longer. The noise is very annoying! And I'm concerned that it will ruin the hard drive. Plus my 20 second bootup is also longer. This started happening after two months living with vista - didnt happened at day one.
I noticed the problem after installing new drivers for my VGA and manually installing some vista/office 2007 security updates. Coincidence? I've tried uninstalling the drivers and installing new ones - but no luck. I've also tried chkdsk /r in an elevated privledge command prompt and a defrag, anti-virus scan and spyware scan. Furthermore, the only thing I have changed in the boot up sequence is: adding 4 core cpu support when booting up, and stopping a few startup items. I have also disabled the readyboost service.
I have a guest side with no password and my admin side with password. i know for a fact that my password is not working anymore and i can not get into my side, im going crazy. i have googled and can only find programs to download, im really nervous and do not trust them. I have no money to take it to geeks squad. i have tried in safe mode, nothing.
I have a new Asus Laptop with Vista. Windows Mail has never worked right. After startup it only works for a period of time. (Anywhere from 5 minutes to 1 hour) It then just shows the following error messages. It also will not send an email until I restart my computer. It always works after a startup. I have Zone Alarm, but it acted this way before I loaded it. Is there a setting that should be changed? My internet connection is a Sprint Mifi. This is quite frustrating. I was able to load previous contacts from Outlook express without problems.
An unknown error has occurred. Protocol: SMTP, Port: 0, Secure(SSL): No, Error Number: 0x800C0148. An unknown error has occurred. Account: 'mail.comcast.net', Server: 'mail.comcast.net', Protocol: POP3, Port: 110, Secure(SSL): No, Error Number: 0x800C0148
i've got sony vaio vs36GJ it had mcafee on itself not good one my laptop has vista home premium x64 i've install nod32 version 4 its hang too much there nothing i can do alt+cntrl+del not working only way to get throught is forcing to shut down i don't know what to do
It started two days ago. When I woke up my computer was on but there was no display. I rebooted the machine and it it came up fine but seemed to shut abnormaly. Later that day when I tried to remote control into my machine I was able to get a black screen (so the connection was established but know video.) When I got home it was the same thing: the computer was on but no video and keyboard and mouse did not work. It seemed though, after looking at the logs, that the computer was functioning because there were logs created during the time it was "off." Looking through the logs I could see nothing abrnormal. Truly I don't know what I was looking for? Anyway, in power options I turned off the feature to shut down monitor after certain time. Turned off screen saver.
The sleep mode was already off. I was connected to PC via remote control from work and machine rebooted itself. All it said in log was: The previous system shutdown at 7:30:29 PM on 4/24/2008 was unexpected. Not sure if the reboot and the aforementioned issue is related. Anyway, I am not sure why this started happening. I did install a game call Rome Univerisalus or some such name. I uninstalled the game when I started having problems. It didn't work anyway. I am using Vista 64. I just recently built the computer. Didn't experience any problems until recently. Does anyone know how I can figure out what is going on? And even better, how to fix. I am thinking of using the restore point of before I installed the game.
I have a WD 3,5 Hard drive and I bought I case so I could make it external. However, when I connect it to my laptop, running on Vista Home Premium x64 SP2 it does not work. The drive is seen by Vista (it shows up in the Disk Management section in Computer Management) but it does not show up in My Computer. In Disk Management it appears Disk 1, Dynamic, Invalid, with a red downwards arrow. As I have all my info there a soluyion that requires a format is not an option.
Everytime I return to work after putting computer to sleep, the computer wakes up without no problem. But once I move the mouse, a shadowed box appeared. With the moment of the mouse, the size of that box enlarges or shrinks. If I click on the mouse, that box disappeared but then a window [View/Sort by/Refresh/NVIDIA Control Panel/New/Personalize] opens. I close this window, only to find the pointer of mouse stop working and the screen is frozen. For now I solve the problem by two ways described below, but it is very annoying to have to do it everytime I return to work from Sleep.
1.I open Task Manager, do nothing, and close it.
2.I right click the mouse on desktop, change the size of Icons. Repeat this action one more time.
I bought this computer about 2 months ago, installed a few games and anti-virus etc. I can play the games fine (Warhammer, WoW) on max graphics with no problems at all however the whole computer will just randomly freeze while playing. The freeze only lasts for about 10-30 seconds, during the freeze the sound loops in the background and the computer acts as if it is working really hard, occasionally it ends in a blue screen although this has only happened twice out of about 60 freezes. I have updated all drivers, checked my network and hardware etc. I thought it may have been a problem with DirectX as when i installed one of my games it froze on the install, i have since reinstalled DirectX off a clean download with no problems.
Before the computer actually came to the point of "shuting down just before it tried to load the o/s" it literrly kept shuting down on its own randomly for a week or so. Then the blue screen appeard with this error: 0x0000007BC , 0x84C5DBA0, 0x0000034, 0x00000000, 0x00000000 "Run CHKDSK /F and check for Hard Drive Corruption and then restart your computer"
Basically it's telling me the DRIVE is corruptet! Well, I plugged that SATA 2 HDD into my other computer (windows xp), detected it correctly and actually formated the drive and reinstalled XP on it without any types of problem. Does it still mean - SATA 2 is corrupted or broken!? How about the RAM then ... indeed, I did run the MemTest for 7 times and no errors were found. So the RAM are ok in this case, or am I wrong?! Maybe it's the PSU... ermmm no that cannot be 'cos the computer never shuts down, if I leave it run for (e.g 5 hours) and even if it's comes to "overheating" that cannot be the case eather, as its *again" never shuts down when you leave it run on the power.........
When I reboot my computer through Windows the computer shuts down correctly, but then the monitor remains black and the bios starts beeping out the error code for "VGA not detected". Why would this be? I am forced to press the power button and wait from 5 to 10 minutes to reboot normally. (I'm using Windows Vista Ultimate x64, have an ASUS P6T Deluxe motherboard and a Gigabyte Geforce GTX 280. 800 watts ZION power supply) Is this a BIOS settings or GPU problem? I already reseated the GPU. Could it be a power supply failure?
I would like to export my contacts from my computer to my second computer. Both computers use Windows Mail. I tried exporting the contacts as CSV and vCard files. Using both methods, I was able to import my contacts into my second computer but they weren't neatly organized in files: i.e. business contacts, personal contacts, family, etc. Is there a way to export my contacts so they are still in the correct files and are neatly organized?
I have a Vista Laptop that needs to access a printer on an XP computer in my sister's law office. I'm having trouble trying to even have the XP computer show up consistently on my sister's computer. I can ping it every time from the command prompt. I have all firewalls unenabled on both computers. Identical user accounts on both systems. File and Print sharing set up on both. The Link Layer topology is present on the Vista computer. When the laptop sits for a while the XP computer will show up on the map; but, Vista comes up with an error message when I try to access the XP computer.
Beyond that, the map will lose the XP computer on occassion. The Vista computer can access the internet well enough through the router. At this point I can't install the printer on the Vista computer for not being able to access the XP computer from Vista. I've networked Vista computers before on XP networks, and this is the first time I've encountered this problem. Additional info; net view will not show xp computer. Workgroup name is the same for both XP and Vista computer. The restrict anonymous registry key on the XP computer is set at 1. Was originally set at 0. (Norton's Systemwork altered setting)
I have a problem: I have a Windows 7 computer that is part of a Domain. By using System Restore, Windows has managed to ruin the trust relationship with the domain. I use a domain logon and am the only administrator on the machine (the Local Administrator is disabled). I cannot log in normally, due to the trust relationship issue. If I disconnect the network cable while logging in, I can (cached credentials), however I cannot change any UAC-protected settings because if I enter my credentials into it, connected to the network or not, UAC will simply show an error "This operation requires elevation". Nothing I try will work.
I cannot disjoin the domain, because those controls are protected by UAC. Logging in from a remote machine using my credentials will give me "Access is denied". Resetting the computer account in AD has no effect. I cannot format and reinstall because this laptop does not boot from CD by default and requires me to install a program to change BIOS settings (don't ask, it's a Toshiba, the usual way is broken). I cannot install this program because I am faced with yet another UAC prompt. I cannot remove the harddrive because of the laptop's design. how to salvage this computer?
I'm running Vista Ultimate on my present computer, have full installation dvd. I'm buying a new Dell computer that comes with Vista Basic installed. Can I move Vista Basic from the Dell computer to my old computer and install my Ultimate on the Dell?
