i've got sony vaio vs36GJ it had mcafee on itself not good one my laptop has vista home premium x64 i've install nod32 version 4 its hang too much there nothing i can do alt+cntrl+del not working only way to get throught is forcing to shut down i don't know what to do
View 4 Replies
I have been searching far and wide for a solution to my networking problem. I have 2 computers that i connect directly to each other by ethernet cable. Both computers also connect to the internet via wifi. So, on each computer, I have my Wireless connection, and the 'unidentified network' link between the two computers. The problem is that the 'unidentified network' settings never save, so when ever i restart either of the computers, I have to make the unidentified network private again, and there is no way that i can see to actually save the unidentified network settings in a profile. Also, to prevent the computer to computer connection from broadcasting over the wifi connection, i have to disconnect the wireless from one of the computers. I have tried making the wifi a public network and the ethernet connection private, but it never seems to work. anyone out there know what i can do?
View 4 Replies View RelatedWell I Formated my HD and installed Windows Vista Ultimate... But the installation prosses Was Very Slow...and when it finished, the system was So slow, that you cant do anything.. and i tried that with new Hard Drive that i just bought but the same thing happens.. Also i tried to install windows Xp and the Same thing there... But when i boot in Safe mode it Goes A little Bit faster , So What maybe the Reason that Happens that?
View 9 Replies View RelatedI have a problem with Vista. Recently, if I don't use a computer about 20-30. minutes and then try to run something then the explorer hangs and doesn't, ALT + CTRL + DEL combination doesn't work . If a program was run before the shell hangs then it will continue to work whereas the explorer is hanging. I have tried to left performance monitor opened and found that the CPU and HDD were not used while the shell was hanging. If I active use the computer without long inactivity then nothing happens.
View 9 Replies View RelatedOn a couple occasions now, I have left the computer, and then come back to the computer to see the screen all black with that circular Vista logo in the middle of the screen. I take it that means the screensaver was about to kick in? Well the system did not respond either time. What is going on here? These Vista freezes are getting tiresome. I have also had problems with Chess Titans. If I open IE while playing it, then system is guaranteed to freeze. If I try to maximize the Chess Titans window, the system is guaranteed to freeze. Some people warned me not to get Vista. If I can't fix the freezing, then I will regret not listening to them.
View 5 Replies View RelatedI keep having the problem of MS Outlook not responding, or clicking on a link in an email and nothing happening, or clicking on any way to get into explorer either from a desktop or task bar icon, etc. If I shut down or restart it clears up for a while, but comes back soon, eventually. I have IE version 7, Vista Home Premium with Service Pack 1. (32 bit) How can I keep this from happening?
View 5 Replies View RelatedWorking on a Toshiba Satellite A205-S4617, using Windows Vista Home Premium. It started out with hangtime -- a lot of hangtime. With anything that put a little stress on the system: music, games, movies were all useless to me now. Even web browsing was a chore, with a 15-second hangtime for each web page opened -- sometimes twice (much worse on the graphics-heavy sites). The system was also extremely slow retrieving files on the hard disk. I didn't know what to do for several months until I narrowed the cause down to the Windows Update Error 80070426. Based on advice to other people with similar problems that I found here and other places, I took the following steps: I made sure my copy of Vista was re-authenticated, then I tried installing the updates again. No luck.
The next option was to restore my machine to the factory settings. This could be accomplished rather easily with the system restore disk that came with the computer. Except that during my last move, the wife thought the computer box would make nice storage for drinking glasses, and promptly emptied the contents of the box. That stuff has not been seen or heard from since. Whenever I describe my computer woes to somebody and they ask why I don't just restore it with the backup disk, I just give the wife a hard stare and shake my head a little, saying nothing.
...........
I am having a problem where the clean install of windows vista ultimate 64bit is hanging on the expanding files (0%)
My pc spec is
asus m2n-sli dlx nf570
amd athlon 64 x2 dual 6400+
4gb pc2 6400 ddr2 ram
BFG geforce 8800 gt 512mb
500gb sata2 hard drive
I have Windows Vista Home Premium edition and I am using Windows Live One Care. Today there was an update to Windows Live One Care. Now when I open windows mail it gets stuck on the authorizing screen and I get this message Account: 'shawmail', Server: 'shawmail', Protocol: POP3, Port: 110, Secure(SSL): No, Error Number: 0x800CCC19
I have 2 e-mail accounts and the 2nd one works fine but the first one does not, I have not changed anything, it was working fine yesterday. I even deleted and remade both accounts and it still does the same thing. If I leave windows mail open eventually it will get past the authorizing and it will receive the e-mails but it is very slow on my regular e-mail address.
The issue is that ever since I installed Vista, it will randomly, without warning, hang for about 30 seconds and then resume without issue.
- Reinstall Vista (done)
- Change SATA to ATA (not possible with Dell Bios)
- Defrag HD (Done)
- Check for Hardware Errors (No issues under XP for 2 years)
- Virus program (does this when AVG isn't installed)
- Drivers (all up to date drivers, froze before nvidia/creative drivers
installed)
- Bios (Latest bios version from Dell)
I have watched the reliability monitor and event viewer and I am not seeing any errors at the time of freezing. I really think this issue needs to be addressed because in my search of these forums and the internet, MANY people are having these problems, but no one is explaining it well enough and so many of the answers are unrelated.
I did a hard install of SP1 over two hours ago on my desktop. The system installed and configured updates-went up to 100%..however...it is still hanging-what I mean by that is I am still on the blue installation screen and it says "Configuring Updates-do not turn off computer" I am not sure what to do...should I just shut it off and restart?
View 4 Replies View RelatedI recently purchased a nice shiny new HP Pavilion DV7-1130US. It came with vista ultimate x64 SP1. I wanted XP but that was not an option. For the first few hours it was very buggy and explorer was hanging alot. After awhile it got better and for about 2 weeks i was really starting to enjoy my lovely new laptop. Well today, for from what I can see no reason whatsoever, my laptop has become unusable. My symptoms are similar to those discussed in this thread: Windows Explorer Crashes I boot up, log in, everything seems ok for the first 30 seconds to 2 minutes. Then explorer freezes and I cant access or use any applications, everything goes into "not responding" mode, and none of my clicks register. Then 2-5 minutes go by and all my clicks happen at once. It seems like explorer restarts once or twice during this too as I get the "ding" sounds.
I have also received some memory errors, and fatal application crashes from various applications. I cant even do anything, I tried to get to system restore in the first 30 seconds after boot up when the computer is usable, but i cant make it and am not sure where system restore is located. I love my new laptop but I am so frustrated right now that I could smash it against the wall. I blame vista, as I am using an old ass XP desktop right now that works absolutely fine, never ever crashes, yet my shiny new fancy HP dual core 4 gigabytes of ram vista x64 bit laptop is ****ing worthless............
When you click shut down, Vista doesn't shut down, or do anything for that matter. If it cannot terminate all processes, in about 3 to 5 minutes it will pop up this screen that say like "this process is hanging, click here to terminate and shut down" or something like that.
View 9 Replies View RelatedI have been trying to run Windows Live One Care Safety Scanner (beta for vista) I can successfully install and run it but when it performs the scan and it reaches 97% completion the program hangs. I have tried uninstalling and reinstalling the software. I thought the problem might have arisen due to vista's securitythen reinstall th features so I first made sure to run internet explorer browser when I re-downloaded the scanner files. However, this has made no difference... the scanner still installs and runs but again upon reaching 97% completion hangs.
I am interested to know if anyone else has encountered this problem and better still if anyone knows how to resolve it.
I have a guest side with no password and my admin side with password. i know for a fact that my password is not working anymore and i can not get into my side, im going crazy. i have googled and can only find programs to download, im really nervous and do not trust them. I have no money to take it to geeks squad. i have tried in safe mode, nothing.
View 9 Replies View RelatedI have a new Asus Laptop with Vista. Windows Mail has never worked right. After startup it only works for a period of time. (Anywhere from 5 minutes to 1 hour) It then just shows the following error messages. It also will not send an email until I restart my computer. It always works after a startup. I have Zone Alarm, but it acted this way before I loaded it. Is there a setting that should be changed? My internet connection is a Sprint Mifi. This is quite frustrating. I was able to load previous contacts from Outlook express without problems.
An unknown error has occurred. Protocol: SMTP, Port: 0, Secure(SSL): No, Error Number: 0x800C0148. An unknown error has occurred. Account: 'mail.comcast.net', Server: 'mail.comcast.net', Protocol: POP3, Port: 110, Secure(SSL): No, Error Number: 0x800C0148
My computer is a desktop HP Pavilion with Windows Vista (64-bit). When I turn the computer on the light that says is on goes on and the computer makes noises like is working but nothing happens, it's like the computer is off. That happened for a week then it really went on and I was able to use it like nothing happened. A week later the same thing happened, I wasn't able to used it for a week. Then a week later again I was able used it, and is been happening that for a month now. I ran my anti-virus but it didn't find anything.
View 7 Replies View RelatedIt started two days ago. When I woke up my computer was on but there was no display. I rebooted the machine and it it came up fine but seemed to shut abnormaly. Later that day when I tried to remote control into my machine I was able to get a black screen (so the connection was established but know video.) When I got home it was the same thing: the computer was on but no video and keyboard and mouse did not work. It seemed though, after looking at the logs, that the computer was functioning because there were logs created during the time it was "off." Looking through the logs I could see nothing abrnormal. Truly I don't know what I was looking for? Anyway, in power options I turned off the feature to shut down monitor after certain time. Turned off screen saver.
The sleep mode was already off. I was connected to PC via remote control from work and machine rebooted itself. All it said in log was: The previous system shutdown at 7:30:29 PM on 4/24/2008 was unexpected. Not sure if the reboot and the aforementioned issue is related. Anyway, I am not sure why this started happening. I did install a game call Rome Univerisalus or some such name. I uninstalled the game when I started having problems. It didn't work anyway. I am using Vista 64. I just recently built the computer. Didn't experience any problems until recently. Does anyone know how I can figure out what is going on? And even better, how to fix. I am thinking of using the restore point of before I installed the game.
I have a WD 3,5 Hard drive and I bought I case so I could make it external. However, when I connect it to my laptop, running on Vista Home Premium x64 SP2 it does not work. The drive is seen by Vista (it shows up in the Disk Management section in Computer Management) but it does not show up in My Computer. In Disk Management it appears Disk 1, Dynamic, Invalid, with a red downwards arrow. As I have all my info there a soluyion that requires a format is not an option.
View 9 Replies View RelatedEverytime I return to work after putting computer to sleep, the computer wakes up without no problem. But once I move the mouse, a shadowed box appeared. With the moment of the mouse, the size of that box enlarges or shrinks. If I click on the mouse, that box disappeared but then a window [View/Sort by/Refresh/NVIDIA Control Panel/New/Personalize] opens. I close this window, only to find the pointer of mouse stop working and the screen is frozen. For now I solve the problem by two ways described below, but it is very annoying to have to do it everytime I return to work from Sleep.
1.I open Task Manager, do nothing, and close it.
2.I right click the mouse on desktop, change the size of Icons. Repeat this action one more time.
Ive ran all the usual virus and malware checks and all is clear. Ive checked Event Viewer I see an error every 2 minutes or so. Error message with red exclamation is: 'The Windows Search Service has failed to create the SystemIndex search index. Internal error 1, 0x800700b7, Failed to add Gather Application: Windows>.'' After this warning icon shows error message: 'The Windows Search Service is attempting to remove the old catalog.' Next another warning icon shows message:..........
View 7 Replies View RelatedI bought this computer about 2 months ago, installed a few games and anti-virus etc. I can play the games fine (Warhammer, WoW) on max graphics with no problems at all however the whole computer will just randomly freeze while playing. The freeze only lasts for about 10-30 seconds, during the freeze the sound loops in the background and the computer acts as if it is working really hard, occasionally it ends in a blue screen although this has only happened twice out of about 60 freezes. I have updated all drivers, checked my network and hardware etc. I thought it may have been a problem with DirectX as when i installed one of my games it froze on the install, i have since reinstalled DirectX off a clean download with no problems.
View 9 Replies View RelatedBefore the computer actually came to the point of "shuting down just before it tried to load the o/s" it literrly kept shuting down on its own randomly for a week or so. Then the blue screen appeard with this error: 0x0000007BC , 0x84C5DBA0, 0x0000034, 0x00000000, 0x00000000 "Run CHKDSK /F and check for Hard Drive Corruption and then restart your computer"
Basically it's telling me the DRIVE is corruptet! Well, I plugged that SATA 2 HDD into my other computer (windows xp), detected it correctly and actually formated the drive and reinstalled XP on it without any types of problem. Does it still mean - SATA 2 is corrupted or broken!? How about the RAM then ... indeed, I did run the MemTest for 7 times and no errors were found. So the RAM are ok in this case, or am I wrong?! Maybe it's the PSU... ermmm no that cannot be 'cos the computer never shuts down, if I leave it run for (e.g 5 hours) and even if it's comes to "overheating" that cannot be the case eather, as its *again" never shuts down when you leave it run on the power.........
When I reboot my computer through Windows the computer shuts down correctly, but then the monitor remains black and the bios starts beeping out the error code for "VGA not detected". Why would this be? I am forced to press the power button and wait from 5 to 10 minutes to reboot normally. (I'm using Windows Vista Ultimate x64, have an ASUS P6T Deluxe motherboard and a Gigabyte Geforce GTX 280. 800 watts ZION power supply) Is this a BIOS settings or GPU problem? I already reseated the GPU. Could it be a power supply failure?
View 9 Replies View RelatedHow do I transfer my quickbooks 2007 data on my xp computer to my new vista x64 computer with quickbooks 2007? Can this be done? If so how do I do it?
View 5 Replies View RelatedI would like to export my contacts from my computer to my second computer. Both computers use Windows Mail. I tried exporting the contacts as CSV and vCard files. Using both methods, I was able to import my contacts into my second computer but they weren't neatly organized in files: i.e. business contacts, personal contacts, family, etc. Is there a way to export my contacts so they are still in the correct files and are neatly organized?
View 9 Replies View RelatedI have a Vista Laptop that needs to access a printer on an XP computer in my sister's law office. I'm having trouble trying to even have the XP computer show up consistently on my sister's computer. I can ping it every time from the command prompt. I have all firewalls unenabled on both computers. Identical user accounts on both systems. File and Print sharing set up on both. The Link Layer topology is present on the Vista computer. When the laptop sits for a while the XP computer will show up on the map; but, Vista comes up with an error message when I try to access the XP computer.
Beyond that, the map will lose the XP computer on occassion. The Vista computer can access the internet well enough through the router. At this point I can't install the printer on the Vista computer for not being able to access the XP computer from Vista. I've networked Vista computers before on XP networks, and this is the first time I've encountered this problem. Additional info; net view will not show xp computer. Workgroup name is the same for both XP and Vista computer. The restrict anonymous registry key on the XP computer is set at 1. Was originally set at 0. (Norton's Systemwork altered setting)
I have a problem: I have a Windows 7 computer that is part of a Domain. By using System Restore, Windows has managed to ruin the trust relationship with the domain. I use a domain logon and am the only administrator on the machine (the Local Administrator is disabled). I cannot log in normally, due to the trust relationship issue. If I disconnect the network cable while logging in, I can (cached credentials), however I cannot change any UAC-protected settings because if I enter my credentials into it, connected to the network or not, UAC will simply show an error "This operation requires elevation". Nothing I try will work.
I cannot disjoin the domain, because those controls are protected by UAC. Logging in from a remote machine using my credentials will give me "Access is denied". Resetting the computer account in AD has no effect. I cannot format and reinstall because this laptop does not boot from CD by default and requires me to install a program to change BIOS settings (don't ask, it's a Toshiba, the usual way is broken). I cannot install this program because I am faced with yet another UAC prompt. I cannot remove the harddrive because of the laptop's design. how to salvage this computer?
I'm running Vista Ultimate on my present computer, have full installation dvd. I'm buying a new Dell computer that comes with Vista Basic installed. Can I move Vista Basic from the Dell computer to my old computer and install my Ultimate on the Dell?
View 9 Replies View Related- 2 Vista computers with Windows mail, networked through the internet;
- I get all the emails at my "main" computer but the other computer only gets email periodically!
I am stumped as to an issue I am having using remote desktop. I have several machines in the office that have been using RD for a while without issue. All are XP SP 3 machines. I have a new Vista Ultimate machine that I am trying to remote to with an XP machine. I have set up RD on the Vista Machine, Firewall is checked, forwarded to the correct port, set the port rule on the router...all the typical issues I am aware of. Everytime I try to connect I get "This computer can't connect to the remote computer. Try connecting again. If the problem continues, contact the owner of the remote computer or your network administrator." I can ping the Vista machine and I can remote from the vista machine to any RD enabled machine.
View 9 Replies View Related
