It has the little <!> showing down by the shutdown button on the start menu, saying "Installs updates and shuts down your computer." I did that. Then I did it again. And again.
Three reboots, still wants me to update. I have done the updates. Now what? I read once the trick was to disable the UAC setting. That did nothing. I get no error message. It boots up normally..then <!> comes back again.
Before the computer actually came to the point of "shuting down just before it tried to load the o/s" it literrly kept shuting down on its own randomly for a week or so. Then the blue screen appeard with this error: 0x0000007BC , 0x84C5DBA0, 0x0000034, 0x00000000, 0x00000000 "Run CHKDSK /F and check for Hard Drive Corruption and then restart your computer"
Basically it's telling me the DRIVE is corruptet! Well, I plugged that SATA 2 HDD into my other computer (windows xp), detected it correctly and actually formated the drive and reinstalled XP on it without any types of problem. Does it still mean - SATA 2 is corrupted or broken!? How about the RAM then ... indeed, I did run the MemTest for 7 times and no errors were found. So the RAM are ok in this case, or am I wrong?! Maybe it's the PSU... ermmm no that cannot be 'cos the computer never shuts down, if I leave it run for (e.g 5 hours) and even if it's comes to "overheating" that cannot be the case eather, as its *again" never shuts down when you leave it run on the power.........
When I reboot my computer through Windows the computer shuts down correctly, but then the monitor remains black and the bios starts beeping out the error code for "VGA not detected". Why would this be? I am forced to press the power button and wait from 5 to 10 minutes to reboot normally. (I'm using Windows Vista Ultimate x64, have an ASUS P6T Deluxe motherboard and a Gigabyte Geforce GTX 280. 800 watts ZION power supply) Is this a BIOS settings or GPU problem? I already reseated the GPU. Could it be a power supply failure?
View 9 Replies View Relatedi have of late, is that when i leave the computer running, normally only playing music or a film, after 30 minutes it my display goes blank: normally it doesn't (the monitor) display that there is no video input. But yet im blank, and then a minute goes buy and then my computer shuts off. I've done a virus scan with NOD32 - came black clean And a scan with Ad-Aware - again clean. I've recently reinstalled all my Operating Systems (i multi-boot: XP, Vista and 7) for better file management.
View 9 Replies View RelatedI have recently reinstalled my windows vista home premium edition which resolved all my driver issues. And now whenever I try to burn a DVD with vista dvd maker it shuts down the computer apparently without any reason whatsoever!
View 9 Replies View RelatedI just wanted to ask why this is, a friend of mine has a computer, its not vista doubt. It just Windows XP. So, it shuts down without any error or anything, I mean like your surfing on the web and the computer shutsdown and restarts, what can the issue with this be? I mean, it just turns off, without any warning, It turns pitchblack and the computer turns on agian. I helpt him defregmantating his computer multiple times, but it still dosnt work.
View 7 Replies View RelatedThere are two times when I have noticed it stopping for a reason. Other times I do not know why it shuts off. Once it stopped after I had a flash drive in the USB port. I did the proper procedure for "safely removing" it, but the computer still shut off when I took the drive out. Another time the computer more or less went to sleep. I was able to restart the computer without it rebooting. I wonder if there is some way to set the time for it to do this.
View 5 Replies View RelatedI have a new Acer Aspire computer running on Windows Vista. I've had it set up for a week now, running every day without any problems. Today, I switched on the computer and before Vista loaded, the computer shut down on its own. I tried again and this time got a screen asking if I want to run a start-up diagnostic. I chose that and the computer shut down again. I switched on again and this time Vista loaded and everything was ok. Apart from installing daily important Window Vista updates, I haven't changed anything on the system.
View 7 Replies View RelatedI am using Vista Ultimate and am on a fairly new computer, does anyone know what is causing this? I've ruled out overheating and energy problems. I set windows to not automatically restart and give me a blue screen on crashing, but it still shuts down and restarts with no warning. Is this a hardware issue? It's done this since I've gotten the computer but it seems to be getting worse now.
View 9 Replies View RelatedI am using Vista Ultimate and am on a fairly new computer, does anyone know what is causing this?
View 7 Replies View RelatedI installed Windows Vista Ultimate on several machines without incident. Yesterday I installed it onto my desktop. A Gateway that was previously running Win XP I had backed up my hard drive to an external becuase I wanted to do a clean setup. I chose those uptions as they appeared in the setup screen. The os set up fine. I then ran Windows Update. AFter everything downloaded I let the system install the 87 updates. The computer shyt down. I restaeted it and re-ran updates again. After downloading it installed about 7 more updates and shut down. Now when I turn on the machine. I get the "Splash Screen" tehn a black screen and in the top left corner it says: Booting "Windows Vista".....
That hangs for about two minutes then I get a screen that says Setup is inspecting your hardware configuration. Then a screen that says: The file ARFSPK0N could not be found Press any key to continue. I press a key and I get a Setup Failed and it just basically goes back to the beginning. I have tried installing the Original XP setup disc that came with my computer however it reads it then I get a message saying that Drive "R" could not be read and then my CD drive door opens. There is no disc in that drive as the setup disk is a DVD so it is in the DVD drive. I went into the whole setup screen and chnaged the boot order but nothing seems to work.
I've been facing the following problem, - actually i'm not been able to solve it - with the last Vista update the system has rebooted and says it is installing updates and reboot and says it is installing updates and goes like that for ever. I can't get the hand on it. Is there a way to solve it without restoring everything but maybe only the system or the boot part ?
View 5 Replies View RelatedAfter installing these two updates: .NET Framework 3.5 Family Update (KB959209) x64 Update to .NET Framework 3.5 Service Pack 1 for the .NET Framework Assistant x64 (KB963707), The performance of my PC drastically slowed down during start-up and running of other processes and programs. I decided to uninstall them; and the performance seemed to be back to normal. My question is: Are these updates really necessary for my PC; do I absolutely need them?
View 7 Replies View RelatedSometimes, after installing MS updates or other apps, I lose my sound. The only way I get it back is to use System Restore to a point where the sound worked. However, then I don't have the updates or apps. This tells me that it's a software problem with Vista - not a hardware problem. Now, I am about 11 MS updates behind - and no sound. Also, the System Restore doesn't work anymore (I no longer have a Restore point where the sound worked). I've Googled and have found that many people have similar problems with their HP laptops. I am using Vista, SP-2. I am now going to ionstall the updates since I can't go back to get the sound. I've checked in Device Manager (no problem) and made sure I'm using the most recent signed driver. I can't find any text indication that I have a problem but when I go to Playback Options and try the sound Test, I get a message which says the sound didn't play. Hope I included all the relevant information. If not, please tell me. I've tried everything I know of. I have a full backup of my hard drive
View 7 Replies View RelatedI don't know how it's possible, but it happened.. Must be some new feature they never advertised, but should!!The other day, Vista (Ultimate 64) was nagging me to reboot after installing some updates.. I kept putting it off but finally it wouldn't let me put it off for as long. In any event, I walked away to get some lunch and when I got back, my PC had been rebooted. I logged back in and things looked like it was starting up normally..But then I see down my taskbar, that I have three programs still open!! I'm like WTF? How is this possible?!?! They were: Outlook, an Unsent/Saved Draft of an email, and another Email which was just open. My web browser windows, and multiple tabs, were all gone though..OR WERE THEY!? I opened IE7 to begin getting my desktop back in order and get my email tabs all opened up, when suddenly I saw that IE7 had all my tabs in it as soon as it loaded!! I could not believe this!!
What's REALLY weird, and I think is confirmation that something had happened, was that I now had 4 tabs in one IE7 instance, whereas before I had two instances of IE7 (cascaded horizontally on my 22" widescreen displays) each with 2 tabs - one set was for email and one was for forums I frequent. But now, IE7 loaded up and I had all 4 of these COMBINED into a single IE7 instance (which btw, I'm trying to figure out how to move tabs from one IE7 instance to another, but there doesn't seem to be a way!)..In any event, I can not believe it still, thus I'm posting this here to see if anyone else has encountered this..If you don't believe me (even I will try this again), go and install some updates (not like SP1 but some basic updates), then wait to let it reboot and see what happens!!
Is it possible to acquire Vista Updates from one computer and transfer these to another one? The reason I ask is because my Vista machine only has a dial-up connection, but my work machine has broadband. So, can I 'grab' the updates on my work machine, save them to a USB or ext. hard-drive and transfer/install on my home machine?
View 9 Replies View RelatedI recently installed a Windows Vista 64-bit HP Pavilion CPU, and I checked for windows updates several times the day of installation. It took me two more days to find out the hard way that I needed two available updates, one for IE8 on Vista 64-bit and an SP-2 for 64-bit as well. I wonder why I had to work so hard to find out about these updates, why the ordinary Windows Update feature did not work as expected for me. For the future, where do I need to go to check for Vista 64-bit updates? Alas, another assumption bite the dust: The Windows Update page reliably tells you what you need to know about updating Windows.
View 8 Replies View RelatedIt came installed with vista home premium but yesterday i bought the vista ultimate upgrade dvd. I inserted the dvd and upgraded as per instructions. It was completed without any problems.I've installed all important updates and rebooted the computer many times.
Now my laptop runs really slow, takes a longer time to boot up -about 3 or 4 mins now. In my sidebar i have a CPU meter and usually both cores run at less than 50 percent but now it jumps around 90-100%?? The graph looks like a lie detector when charles manson answered no to the question if he killed anyone?!
I know I can only have one registered copy and that's on my computer but is it possible to have a working Vista on a friend's computer but without having to register it? I have the upgrade version of home premium SP1. I remember reading that it's possible to install Vista without registering for a certain amount of time and that the time can be extended. I figure they can't use windows update but I think the Vista HP SP1 by itself is rather stable regardless. I was going to have them use the Windows 7 Beta but it can't be downloaded anymore from Microsoft's site and I don't want to use torrents. They'd have bought Vista themselves by now but with a kid on the way and moving, they can't shell out the dough right now and their comp is acting up.
View 5 Replies View RelatedI have just got in from work and turned on my pc. It did an update as he "configure 0 out of 3 updates" screen came up when it was loading. Now when it gets to the logon screen and I enter in my password I get this: "You cannot log on because the logon method you are using is not allowed on this computer. Please see your network administrator for more information."
View 8 Replies View RelatedMy friend bought a new computer a few months ago that came with Vista installed. It also came with a bunch of other programs (bloatware) installed. I uninstalled all the stuff she didn't want, which included Norton AV, and replaced that particular program with AntiVir, which I have used and liked for years. She doesn't use the computer for much except playing pre-installed card games and reading email, and she didn't install anything except her Kodak printer. I installed the Comodo firewall, but that didn't work well for her, so when Zone Alarm released a Vista-compatible version, I uninstalled Comodo and installed ZA.
She began telling me the computer was freezing up from time to time. Then it began freezing up regularly. Now it is freezing up so badly that she can't even play her games. I reviewed the event log and found errors involving Windows Error Reporting service, and warnings about the printer. I turned off the error reporting and unplugged the printer. The problem persisted..............
I have an HP computer that was running Vista nicely and smoothly. However, it appears after downloading and installing Vista SP 1, the computer has a tendency of "freezing" and the only remedy is to press the power button. I did notice that when the computer freezes, my second bay DVD drive flashes, and the activity light on the console, which indicates HD activity, constantly flashes. It is a new HP Computer running Vista Premium Home.
View 4 Replies View RelatedI have a Acer aspire Laptop with Windows vista 64 bit It worked fine until the other day i started it and it wouldn't boot windows at all. The only disk that I got with my computer was the Windows vista anytime upgrade CD. It has let me install windows vista once before when my computer crashed. Now when I try to re-install Windows vista everything works fine until I get to the part where it asks me to select the drive on where to install it to.I can't find any where it is suppose to list them.Also what used to be my C: drive is now Drive X: I have tried to boot from dos,Treid to do the repair,Nothing seems to work. When I start my computer now the only thing I get is; Media test failure,Check cable Exiting PXE ROM Can anyone give me some ideas on what to try or do?
View 5 Replies View Relatedwhen i install Windows Vista and it is on Expanding Files it takes a really long time, its suddenly stops and its takes a really long time to increase the percentage of Expanding the files...
When it's finish Expanding the files it takes about 1 hr to install and when the installation is complete the start up takes about 30 minutes to finish and open the desktop and when im in the desktop, it takes about 10 minutes to just click on something and usually it freezes or locks up and it will just continue reading.....
I have already tested the "Windows Vista Upgrade Advisor" and it said that my computer can run any Vista Version. i've been so stress just waiting for the installation of this Windows.
xAorKZKHA.1592@TK2MSFTNGP06.phx.gbl> I wanted to try Win7 without losing Vista, so I installed it on a separate partition to dual boot.So I have Vista on C: and Win 7 on G: - same disk, different partitions. A boot menu was set up, but Win 7 boots by default if I don't choose Vista instead.I now want to move towards Win 7 on C:, and return to just one partition. But I have quite a lot of software and shortcuts now set up on G:, and if I were to delete C:, change G: to C: I'd have to start uninstalling and reinstalling everything so that C: was referenced. by everything. I'd rather install Win 7 onto c:, and gradually install software again, whilst being able to continue booting into Win 7 on G; to carry on working as needed. So, if I were to install Win 7 again onto the C: partition, either by doing an upgrade, or formatting C: and doing a fresh install,
a) would that cause any activation/legal problems, having Win 7 installed on the same computer twice in separate partitions
b) if it was OK to do that, which installation would become the default boot option.
Has anyone ever tried installing AOL software on a computer running 64-bit Vista?
View 9 Replies View RelatedMy computer has Vista Home Premium installed but about a couple of weeks ago my computer started to boot up slow (taking about 10 minutes). I couldn't figure out the problem and neither could anybody else so I am going to re-install vista.Is it possible to re-install vista without losing any personal or program data?
View 4 Replies View RelatedDesktop PC will be one year next month. I did not renew the Microsoft Office after trial period that came as a package w/ no future intention of acquiring it. I'm using the free Open Office program - word processing mostly at this time. Is there anything in the list below that is of importance? I only have a basic PC with DVD player for movies, etc. No scanner, printer or fax. Not even external hard drive or usb flash drive. Otherwise, I understand that I can just choose to hide the updates, so it will not keep reminding me. Also, I choose to keep my OS w/ Srvce pk 1 and MS IE version 7 for as long as I'll be able to. I had too many probs with Srvce pk 2 and MS IE version 8. Your opinion, if any, is welcome.......
View 9 Replies View RelatedI have Windows Home Premium 64 Bit and every time I restart I get a message saying 1 to 3 updates ... I then see this message again on startup. I feel like something is wrong with the update system. I reinstalled Vista and disabled automatic updates. However, after a while I started to get the same problem. I have Office, Visual Studio, Messenger and a few Adobe products installed.
View 9 Replies View Relatedmy pc started to shutdown by itself about two days ago.. it's a self-built with Intel Core2Quad Q6600, 4 GB Kingston 800 MHz RAM, nVIDIA 8500 GT, 320 GB WD SATA HDD, and ASUS P5K MB
i don't know the reason, but the night before it happened i detached the fan to clean it then re-attached it again "appropiately" and turned the pc on and it worked, and i did a deep system scan using trail version of BitDefender Total Security 2009 "which ends tomorrow btw" and i slept, and when i woke up the next day it was done and i read the report and all was good!
i turned it off, and by noon when i started it again, the problem appeared, and it started shuttingdown by itself since then..
i am writing this post while i am on SafeMode, and it's working on safemode and didn't shutdown in half an hour now ...
My windows xp that I have had for about 2 years suddenly started to shut down and restart on its own. Out of the blue, over and over. Boots up shuts down, Boots up shuts down. I use it for my business payroll and bill paying. When I do get it to stay on for a couple minutes I have to restart my active desk top. I have tried defrag and cleaning it up. Checked all my plugs and tried everything I can think of.
View 9 Replies View Related