My Vista home premium automatically locks after a short time. This is super annoying. I want to turn it off. My screen saver used to come on, but now it locks instead. I am using the Webshots screen saver, and it does not have anything on it for setting a password, so I cannot set that, as was suggested in another forum. Isn't there some way to simply tell windows to NOT automatically lock my computer, EVER?
View 6 Replies
After starting my computer, it runs for sereral minutes & then locks up. Yesterday, I tried to install Vista SP3, it failed to install. The message I got that it would revert the computer to where it was. I noticed all of my settings weren't the same as before. This was yerterday morning & the computer locked up for the first time last night. could this be the problem or could it possibly be something else? I,ve tried System Restore at startup & safe mode, but it won't stay running long enough.
View 6 Replies View RelatedThis is my 4th Vista install on this box in a week and a half. This time I failed to uncheck the "activate automatically" box after I entered the key. Checking System, it says I have 3 days before automatic activation. How do I kill that? - if this one flies, it won't be ready for at least 5 days.
View 5 Replies View RelatedAllow me to backtrack. A bit over a month ago, my video card started to show some pretty obvious signs of nearing demise. Graphical glitches in video games, random screen black-outs, and even more random total computer lock ups--but only when playing games. So, I replaced it. All was well. Until a couple of weeks ago. Now, all I'm getting is the lock-ups. These stopped when I first replaced the card, and only recently started happening. These locks are...different, though. For starters, they happen whether I'm playing a game or not. I don't have to be doing anything even remotely graphically intensive. Just staring at my desktop after startup will occasionally freeze. That said, it happens most often while I am playing games--but a counter to that would be that most of the time I'm on my computer, I'm doing that. So it's not exactly a reliable conclusion.
Something else strange about these freezes is that...they usually come to a slow halt, rather than slamming on the breaks. It's most noticeable when I'm typing. Letters will show up a split second late and within a few seconds, the computer is a brick until I manually reboot it. I've tried a few things. The video card is seated properly, the drivers are up to date. I cleaned out what little dust was in my computer. I defragmented. I tried to reinstall Vista. Tried to. I pop the disk in and it does its thing for what feels like forever, only to give me an error message and revert my system back to before it started. Honestly, I didn't write the error down though I know I should have. It was dawn, and I was too busy slamming my head against my desk.
My friend bought a new computer a few months ago that came with Vista installed. It also came with a bunch of other programs (bloatware) installed. I uninstalled all the stuff she didn't want, which included Norton AV, and replaced that particular program with AntiVir, which I have used and liked for years. She doesn't use the computer for much except playing pre-installed card games and reading email, and she didn't install anything except her Kodak printer. I installed the Comodo firewall, but that didn't work well for her, so when Zone Alarm released a Vista-compatible version, I uninstalled Comodo and installed ZA.
She began telling me the computer was freezing up from time to time. Then it began freezing up regularly. Now it is freezing up so badly that she can't even play her games. I reviewed the event log and found errors involving Windows Error Reporting service, and warnings about the printer. I turned off the error reporting and unplugged the printer. The problem persisted..............
just curious why it locks, and if it can be changed.
- If I turn on screensaver, and choose 'On resume, display logon screen'
- If I turn it off again, it locks my computer after the time set in screensaver. Even though it's turned off.
I've recentely bought a Qnap TS-109 NAS Sever. I am trying to copy all my bideo and music files over to it, however, as soon as I sart a transfer (either throught windows explorer or FTP) my computer slows to a crawl. Basically videos and music become juddery, my mouse and keyboard become very slow etc. Also I only seem to get about 3.5 MBPS when transfering files. Im on a 100mbps lan, my maths says that says thats a maximum of 12.5 MBPS, I know there are overheads but it should still be faster? Infact streming videos from the NAS server to my computer is worse that streaming them via my 54mbps wireless connection to my PS3. Is there something wrong with my setup? I am using two devolo highspeed home plugs between my pc and router, although my pc still says its connected at 100mbps and the homeplugs say they are linked at 100mbps.
View 4 Replies View Relatedthe computer was always flying...in the last mointh it has been jamming up. locking up where I have to got to task manager and end task to get out. sometimes it look like it is locking up , but is only going SUPER slow, because I can still use the mouse as in sliding the page up or down. when it locks I cant use anything.
sometimes It happens with in a few clicks of the web pages I enter. I have Kasperky installed and I get pop ups about intrusions............
I use Vista Home Premium 32bit and I want to install Toolkit to Disable Automatic Delivery of Internet Explorer 8 at also checked out this page at for the step by step guide to install it. But in Vista Home Premium 32 bit, I cannot open the Group Policy Editor. When I type GPEDIT.MSC from startRun and then hit the Enter key, the error message says soemthing like GPEDIT.MSC does not exists. After I downloaded the Toolkit, I run the IE8BlockerToolkit.EXE and it extracted 4 files:
IE80Blocker.adm
IE80Blocker.cmd
IE80BlockerHelp.htm
IE80BlockerHelp-GPFilteringDialog.jpg
I double clicked on IE80Blocker.cmd and then I cannot proceeed to the next step to setup the IE8 Blocker Template (IE80Blocker.adm) May I ask if anyone can shed some light on this? How can I install this Toolkit to Disable Automatic Delivery of Internet Explorer 8 in Vista Home Premium 32 bit properly?
On Win XP there was a tick box under folder options view tab to enable/disable automatic searching for network folders and printers. I cannot find the equivalent for this in Vista Business or Vista Ultimate. Does anyone know how to do this in Vista?
View 7 Replies View RelatedI used to have Vista Home Basic on my computer. I have a Logitech mouse that came with software, and it displayed a Logitech Mouse and Keyboard icon in the system tray. You could adjust mouse settings, and it told you when your wireless mouse's batteries were dying. So I got a new hard drive and a version of Vista Home Premium. Installed Vista and all of my programs, including the Logitech software. Now when I login I get the message that Windows wants to run setpointupdate.exe and I have to click Allow or Cancel. I never got this message with Vista Home Basic.
I've already Googled setpointupdate.exe and read many posts (including one on this site) saying that you have to go into your Logitech settings and disable automatic updates (tried that, didn't work), or that you had to uninstall your Logitech software all-together. But I want the software - I never change my mouse settings, but I like that the system tray icon warns me when the batteries are dying. Yes, I could uninstall the software and figure out on my own that the batteries are dying (by my mouse stopping working), but why should I have to uninstall this Logitech software? Isn't there a way to tell Windows that setpointupdate.exe is ok to run and that I don't have to click Allow EVERY time I login?
I have spent the last 2 days on the line with Microsoft experts. They tell me that I cant uninstall SP1. Since the automatic update for SP1 my computer just freezes. Whatever program is running says (not responding) and I cant Cntrl Alt Delete or anything. I end up having to cut the computer off and restart. Am I stuck with this, the worst update ever?
View 5 Replies View RelatedI did have my operating system set up on "Classic" setting to resemble Windows XP and when it was set that way anytime I slid the memory card from my camera in it would pop up the pictures in a new folder in my already existing software I store pictures in. All I needed to do from there were to highlight and drag them into another folder and delete the pictures out of the folder they popped up in...thus emptying the memory card from my camera. Since I have switched the look back to Vista appearance (Vista Home Premium) now I have to go thru Start, Computer, and then click on the drive to open the pictures on the memory card. I also have to manually open my picture editing software manually and drag the pics from the temp folder to my regularly used software to move the pictures. What changed just by changing the appearance of the operating system and how do I get it back without changing the whole appearance back to the "classic" look?
View 2 Replies View RelatedI would just like to ask a question about the UAC; if you disable the UAC account on a User does that disable it for the whole computer?
View 6 Replies View RelatedOk so I built the machine that I am using right now (see sig for details) close to the beginning of the year. Every once and a while (including the first day I used it) it would do this hard lock up sort of thing. Basically everything would be going ok and then all of a sudden the computer would completely freeze, even the keyboard and mouse would freeze. When I hit ctrl+alt+del, the circle on the loading cursor goes for like half a second and then freezes. The only thing I can do is a hard reboot. Up until recently, the problem had been happening sporadically and it didn't really bother me that much, so I didn't even bother troubleshooting it or anything like that. In the last week (even before vista sp2), it has just been locking up uncontrollably. I log into windows and within 5 minutes it has locked up again.
Here are some things that aren't mentioned in the computer build:
-I'm using a 500gb western digital mybook external hard drive and sometimes when i turn off the computer, the blue light on the hard drive stays on (the usb ports are still sending power, maybe it's overspinning or drawing too much power and causing windows to lock up but even without the hard drive plugged in it still freezes...just a thought though)
-I'm using an EDIMAX wireless card adapter (can't hard wire to where I am in the house) and I've heard that the card has issues with vista 64-bit so this is my best lead on the problem right now...the card is EDIMAX EW-7128g
-I am currently running a memory test to check for bad RAM but the test has been stuck at 21% on the first pass (10% overall) for about an hour and a half now ...
I Recently put together a new cpu, using Vista Home Premium 64-Bit. But for some reason the system keeps randomly locking up in 10-20 min intervals that I have to restart the system every time. Also when I try to install Vista 64 bit SP1 at the end of installation it tells me there is an internal error. Is this simply a case of bad Ram or something more?? Here is the system specs.
-AMD Phenom 9850 BLACK EDITION 2.5GHz Socket AM2+ 125W Quad-Core Processor
-GIGABYTE GA-MA770-S3 ATX AMD Motherboard
-XION Solaris XON-404 Black with Blue LED Light Computer Case
-CORSAIR DOMINATOR 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 1066 (PC2 8500) Dual Channel
-XFX GeForce 8600 GT PVT84JZAFG Video Card
-ARCTIC COOLING ACF64LP 60mm CPU Cooler for low profile PC
My 3 boys have a comp with Vista Home- none of their account are password protected- but have parental controls set up. Can I lock the computer from all their use using my admin passwod?
View 5 Replies View Relatedhow I can keep my laptop from automatically locking itself when ever my screen saver goes up. Basically, what I'm trying to make my computer do is simple. My brother has an HP laptop (I have a Toshiba), when he opens up his laptop or restarts it from sleep mode or what ever, it automatically loads onto the desktop. For me, it loads up the choose-a-user page, in which there is only one user, and it claims it is "locked".
I have tried a few different things so far, I went to my screen saver settings, unchecked "On resume, display logon screen", then I tried going to the netplwiz program from the start menu, disabled "Users must enter a user name and password to use this computer.", hit apply, and since I don't have a password on my computer, and I hit OK. Vista even made me log off and back in to change this setting. And it is still locking the computer every time it goes into sleep or the laptop is closed.
I have an HP xw9400 Workstation with Vista Business x64 SP1. Every day or other day the entire system just locks up, no screen of death, just everything is frozen. When it freezes I cannot move the mouse, use the keyboard, I do not see any movement from any taskbar or gadget bar icons so I know the system is completely locked up and its not just a mouse/keyboard issue. I also removed the wireless mouse/keyboard and used USB and PS2 connect mouse/keybard and still freezing. I upgraded the BIOS. Made sure I have all the latest Windows Updates Upgraded all the drivers I can think of Upgraded the SAS controller firmware Made sure Kaspersky is always running and up to date (anti virus/firewall enable) Uninstalled any software I did not think is needed. Made sure the PC is connected to a UPS and that the UPS is functioning well...........
View 5 Replies View RelatedI'm having some trouble trying to get my PC to lock up when it comes out of "sleep" mode. It also does not go into the Screen Saver anymore it just goes straight to "turn off display" and then it doesnt lock up the PC when it "wakes up". I am guessing this is an interface problem or maybe a registry problem.
View 4 Replies View RelatedI recently built a new computer and bought the Vista Ultimate upgrade for it. I'm running Vista Ultimate x64. My system is:Intel Core 2 Quad Q6600 2.4GHz 2x Geforce 8800 GTS in SLI Asus P532N-SLI motherboard 4GB Corsair DDR2 800MHz RAM 2x 150gb WD SE16 SATA drives running in RAID 0 Striped Seemingly out of nowhere, system services have stopped working. I have all kinds of problems:Can't open control panel Can't access my computer 'properties' (where it would show all the specs, allow me to change product key, etc) Can't access the "Personalize" menu from my desktop The "Aero" theme is unavaliable Can't access Windows Update Can't access Windows Ultimate Extras and many other system operations are blocked Can't access my 'installed updates' to even attempt to rollback any updates that may have caused this. I know what comes to mind immediately: Invalid product key, so the system is locking down. The only problem is, my product key ISN'T invalid and I only encountered this problem recently.
Yes, Software Licensing service is running.All of my NVIDIA FORCEWARE drivers are up to date.I have all hotfixes that apply to my computer. I used System Restore to as far back as possible to no avail. I tried booting from the Windows DVD and repairing from there, with no luck. I do have the Vista SP1 RC installed, which could be the issue, but it was working fine with it installed for the past week. And I can't uninstall it even if I wanted to because I can't access the installed updates. Sorry for the long post, but hopefully you guys get the idea, or anyone who is willing to help anyway. I'd like to fix this problem WITHOUT having to format and do a clean install if possible, that's the main reason I'm posting here. Because I know I can fix it with a clean install.
Intel Q9400 Quad Core
EVGA 750i SLI Motherboard
2x XFX 8800GT Alpha Dog Videocards
8g OCZ Platinum Edition RAM
1 WD Velociraptor 300g drive (main)
1 WD Green 1 TB drive (storage)
Alpine Cooling Pro Freezer 7 (cpu heatsink)
Vista Home Premium 64 bit
The install of Vista has been nothing short of a nightmare..the OS keeps locking up at random intervals and reducing me to tears. I can't even seem to get the drivers installed without issues. I have tried to do most from safe mode to no avail. The next step was to remove all but 2 g of RAM and one of the video cards but things are still locking up for no apparant reason. Sometimes the install hung on "expanding Files" sometimes it would make it through that only to hang at the splash screen or once the os had booted up. We ten tested all the RAM with a ram test and everything was fine. Im at my wit's end here as I have pulled everything out to make it as bare bones as possible.
One thought from a friend was that the raid drivers may be causing an issue as this has been known to happen on intel mobos. Although I thought I had the Raid driver off anyway as Im not doing an array....yet.
I have searched this newsgroup (as well as Google) and have found many items which are similar to this situation, but nothing quite exactly the same.
In my office I have 9 of the exact same computer (Dell Optiplex 755),all with the exact same software setup (Vista Enterprise 32bit).This issue is happening on only 1 of the computers (which leads me to believe that this is NOT a driver problem).
The user has her computer set to require a password when the screensaver is activated (normal windows screen saver, not some 3rd party program).
When the screen saver is activated, it locks the computer and the monitor goes black. All is well.
When she is ready to unlock it, she hits alt-cntl-del. 7 out of 8 times, the screen comes back to the logon screen where she can type in her password, and unlock the computer. But 1 time out of 8, the monitor will be totally black except for the arrow for the cursor.
She can move the mouse around fine (indicating the computer itself is ot toasterized).
Things we have tried:
* about 1/2 the time, unplugging the video plug from the computer and
plugging it back in will restore the picture (note that simply turning
the monitor off then back on *never* works).
* typing her password on the black screen will sometimes work (my guess
is that the prompt is in the right place)
Other than this issue, the computer works fine (meaning there aren't
other symptoms that indicate other problems).
how to stop Vista Home Premium from locking up when I right click on a file in a folder. Why is this constantly happening? It's becoming annoying to the point of making me dread doing some of my work where right clicking is necessary.
View 9 Replies View RelatedI need to use C:WindowsMicrosoft.NETFramework64v2.0.50727jsc.exe very hoften from cmd console.
I don't remember how you set up so that I don't need to write the whole path each time I wanna access this program
How can I prevent Vista from automatically shutting down after a given period of time? I like to listen to online audio all day, but not necessarity while working on the computer.
View 5 Replies View RelatedI use a laptop at the office and at home. My problem is that Vista won't update its network settings automatically when I change from one network to another. Per example, my office network has 192.168.0.0/255.255.255.0 addresses and my home network has 192.168.1.0/255.255.255.0 addresses. When I arrive at home and the computer connects to the network, it keeps its 192.168.0.0/255.255.255.0 address, which of course results in limited connectivity. I have to use the Repair tool each time to get the connection back (and it means waiting for a looooong minute in front of the computer...)
View 9 Replies View RelatedI created my folder pair, but SyncToy doesn't do anything unless I manually go in there and tell it to sync the pair up. I am upset it won't the sync without waiting for me. As long as the computer is relatively idle, sync away.
View 5 Replies View RelatedI have just recover my window vista business. But i don't know why the IE7 always opens automatically. Many times i cancel it but it still opens again and again. The possibility of having virus if very low because i have just recovered the window.
View 4 Replies View RelatedAnyone know if its possible and if so how to prevent Vista from keeping the message balloon of "Automatic Updates is off" from popping up?, each time I reboot after a few minutes this pops up and its irritating me, I don't have automatic updates on as I choose when to go and check for any, but this message will insist on popping up to remind me, but I'm not daft and would like it to know if its possible to stop it
View 3 Replies View RelatedI've noticed that my computer automatic shut the computer off and I was
wondering if somehow that I might have set up in my computer somewhere
without realizing it.
Can anyone help me on this?
I'll be reading something and before I know it, the computer turn it self off.
I turned it back on and it works fine.
