External HDD, System Restore
Sep 5, 2008
I have Vista Home Premium 32bit running on a Sony notebook. I actually ran system restore last night and have not installed anything since so my system is clean/fresh. I have a Maxtor 500GB external HDD which I connect to my PC via USB2.0.
When I connect the drive, it shows up in Explorer, it shows up in Disc Management, it gives the correct capacity, etc. However, every once in a while (yes this problem is random) when I try to access files/folders on the drive, Explorer will just hang. The busy cursor shows up, and nothing responds. The ONLY way to fix it is to pull the USB cable. Rebooting doesn't work b/c on the "shutting down" screen it just hangs UNLESS I disconnect the drive. Other times, I can go into a folder on the drive but only a few of the many files inside show up. However, sometimes the drive works NO PROBLEM and is very speedy!
I can't run any disc scan utils b/c they hang and the HDD again becomes unresponsive until I disconnect it. And I can never see properties of ALL the folders, nor can I change folder icons. While any of this is going on, the drive NEVER grinds while hanging. It doesn't seem to be searching for anything. It's like it's clogging up something w/ Windows. Also, in Explorer, the green bar is always growing as if searching.
View 8 Replies
ADVERTISEMENT
May 10, 2009
I did a system "complete pc back up" throught the "Back up status and configuration" program that comes with vista. This saved the items to my external hard drive but using the restore feature I can not do a system restore from these files. I can find the external harddrive, it just can not access the files on the drive.
View 6 Replies
View Related
May 26, 2008
Why can't I use system restore to restore back to certain restore points? I was only successful twice with it. When my laptap was new and when I used it after re-formatting my hard drive. On all occassions after those two instances I can never restore back to any restore point. It always says that "unspecified error" line. If Microsoft doesn't know what happend, how could I. Why did they bother putting system restore if it doesn't work all the time anyway. It gives you a false sense of security.
View 5 Replies
View Related
May 28, 2009
After installing SP2, on 5/25, System Restore seems to have stopped creating automatic restore points every 24 hours. I checked the Task Manger and it is set for 24 hours. It shows a restore point being created on 5/26. System Restore shows the last Restore Point being created on 5/25 about 1 hour after downloading.
View 5 Replies
View Related
Apr 11, 2008
I have a recent problem installing Windows updates on Vista Ultimate as the update process stays on 'creating restore point' forever. I've let it run as long as 7 hours in this state, with no change. It looks like the system is unable to make a restore point sucessfully. I know it has worked in the past, as I'm fairly up-to-date on Windows updates. Reading some other threads, I've tried using Disk Clean-up to remove all by the most recent restore points, and then try to disable/re-enable system restore - this part without success. When I check the system properties for System Restore, the System Restore button is greyed out. I've attached a screenshot of the screen for reference. I've checked the group policies to verify the System Restore is not disabled there.
View 9 Replies
View Related
Jan 14, 2008
I suffered a hardware failure on the system (C:) volume yesterday, which is in a RAID 0+1 configuration (of four Western Digital Raptor 74GB drives). I managed to keep the system up long enough in degraded mode to perform a full (and successful) Complete PC Backup onto an external USB hard drive. This was done just in time, as at the next reboot, the RAID array failed completely and caused data loss (amongst others, my user profile files and the boot manager system file). When I booted up with my original Ultimate DVD and chose to completely restore the PC, it cannot find any images despite the USB drive being connected to the PC. I have verified in the BIOS that the USB drive was recognised. Upon further research, the original (pre-SP1) Vista RE does not support the loading of USB drivers at the Complete PC recovery stage - these drivers have to be loaded in manually via drvload.exe in X:windowssystem32.
I tried to load in drivers in C:windowssystem32 (surprisingly still accessible), but failed to do so. Has anyone done this before? Where do I find the correct INF to load into Vista RE in order to access my Complete PC Backup image? Do I need other INF files in addition to USB.INF to get this working? I presume it may be necessary to get the USB drivers onto a CD-R and loading them in that way, although I'm hoping the solution will be more self-contained on the PC's system drive.
View 9 Replies
View Related
May 11, 2009
I went to accessories/system tools/system restore and clicked it. I then got a small dialogue window asking if I wanted to continue and I clicked continue. That little window disappeared but then nothing hasppened. I was expecting to see a list of possible restore points but nothing showed on my screen. I clicked system restore again and got a message that system restore was already running and would now exit.
View 9 Replies
View Related
May 3, 2009
Not sure why but when I try to open system restore I get this message: "System Protection Settings has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available." I cannot make or restore my computer. If I go into system protection I get this error: C:WindowsSystem32SYSDM.CPL is either not designed to run on Windows or it contains an error. Try installing the program again using the original media or contact your system administrator or the software vendor for support.
View 9 Replies
View Related
Mar 23, 2010
I am new here and I have been having problems with my laptop for at least a few months now. And now I am fed up with it and just want to do a full system restore. I have no disks or previous system save dates. I talked to one of my friends and he said that i need a disc. I am just coming her for confirmation and or help. I am running a Toshiba Satallite P505D with and AMD Turion X2 dual core processor 4GB of Ram and a 64 bit operating system.
View 5 Replies
View Related
Oct 26, 2008
I wish the ****ing dumbass companies wouldnt preload computers with useless trials and dumb****. Ever since this computerwas purchased, I've had more problems than Lindsay Lohan had with DUI and drugs.
Holy ****. Games, Personalization, System Restore, System Backup (Error code 1068), User Accounts, and Windows Update. They show up, and then they dissapear right away. Any help please? Virusscan'd with AVG, tested hardware, it's clean, I dont know whats wrong.
View 8 Replies
View Related
Jul 29, 2009
My wife was on the internet and suddenly System Pro popped up and started scanning warning my wife of a virus attack on her computer and wanted her to buy the AV Pgm for $49.95. She just clicked all the exits and got off of the internet and now she is locked out of her computer. We can't get system restore to work, Can't get safe mode to work, She has AVG 8 installed but cannot start it. Tried SFC /scannow but was denied access. Tried putting the Windows XP disk in to do a repair and was unable to get it to start. I think the only thing to do is reformat the HD and start over but her PC ignores the A drive and the dvd drives. I cannot get into it in order to re format it.
View 9 Replies
View Related
Apr 25, 2008
I am trying to get rid of system restore shadow copies on my Vista home premium. I keep getting system error when I try to reduce the room used on my C drive as I only have 28gb of 145gb left. I have tried typing in:vssadmin list shadowstorage For the above command to run you must use elevated privileges:
1.. Click on the Start menu then click All Programs / Accessories
2.. Right Click on the Command Prompt option and from the drop down menu click on the Run as Administrator option
3.. At the command prompt type vssadmin list shadowstorage and Press Enter
(NOTE: if the command does not run change directories to c:windowssystem32) After the vssadmin has executed you will see results similar to the following:.....
The output above shows space used on the C: drive by System Restore is 237.419 MB. The maximum space allocated for System restore is 2.092 GB To view the number of restore points you currently have on your Computer run the following command vssadmin list shadows Next, to reduce the allocated space used by Vista's System Restore, use the following command: vssadmin resize shadowstorage /on=[OnVolumeSpec:] /for=[ForVolumeSpec:] /maxsize=[MaxSizeSpec] Where example: vssadmin resize shadowstorage /On=C: /For=C: /Maxsize=1GB When decreasing the space allocated to System Restore, you will loose the earlier system restore points. The advantage is gaining extra free space. If you are concerned with losing the previous restore points, wait until you do not need them anymore before reducing the allocated space. If you plan on upgrading to Windows Vista or running a clean install and will need extra space, consider reducing the space after installation has completed. It is not recommended to disable System Restore. The capability to restore to a previous point in time or having the new Shadow Copy feature available can be a time saver if something goes wrong or if you delete a file. source: John Barnett Windows Vista Support I keep getting an error message. I seem to remember doing this before with my XP but can't remember how. Is there an easier way?
View 4 Replies
View Related
Aug 28, 2008
I've been facing issues with backup / restore / system restore
View 7 Replies
View Related
Jun 19, 2009
The mystery, at least to me, my PC was running almost 2 years. and it was not until about 3 weeks ago that System Restore began to save Restore Points the size of Approx 3 to 4GB daily. Prior to that the Restore Points were well under 1GB. it would be 3 to 6 days before I noticed the loss of 1GB. So why suddenly would the Restore File grew 1 one day from well under 1GB to between 3 to 4GB? That now is the issue I would like to know the answer to. and perhaps that file being saved with each Restore Point is not needed. I mean it wasn't needed for almost 2 years. so I can't think over night it became important but it sure is eating up HDD space.
View 5 Replies
View Related
Apr 13, 2008
Trying to restore my system but when I attempt to see the restore points Vista tells me the wizard is already running the this program will close.
View 9 Replies
View Related
Mar 23, 2008
I have vista home premium and a new Laptop. I need to make System Backups (complete drive c I realize that Toshiba put so much junk software on my new laptop but could not see it's way to include a System Backup.
View 5 Replies
View Related
Apr 2, 2010
I'm using HD from my old computer (XP) as an external drive on my Vista laptop. The HD has XP on it. When I power up it looks like the HD is trying to boot XP on top of my Vista and freezes the system. How can I avoid this attempted boot? Where should I place the jumper on the HD.
View 8 Replies
View Related
Oct 31, 2009
I have Windows Vista, and I like to make my external usb hard disk stay at D: drive even after I reboot the system.
View 5 Replies
View Related
Nov 29, 2009
I am looking for a 1 to 1.5TB external hard drive to backup my system on. I do not want it to run backups automatically. What is a good one?
View 5 Replies
View Related
Apr 6, 2008
I have XP Home on my desktop and it has an external Western Digital USB attached drive that I have set up as shared on the network. I also have allowed updates from netowrk users in the share settings. I can see the drive from my Vista Home Premium laptop, but when I try to access it I get an error: "drivename" is not accessible. You may not have permission to use this network resource. Not enough server storage is available to process this command.
Now I shared the internal C drive on the desktop with the same share settings and I can access that drive from Vista with no problem. The only things I can't access on the C drive are documents and settings, WINNT and other systems folders, whcih is, I assume, as it should be. Otherwise I can access all the folders and files on the C drive. I have Norton Internet Security on the desktop and Norton 360 on the laptop, but my home network is in the trusted group for both firewalls and, since I can see the drive and can also access the C drive, it doesn't appear to be a firewall problem, but some kind of permissions problem, and of course I can't set permissions on the XP Home system. Can someone explain to me what is wrong? I have been searching for days on the web for answers, but as yet have not found a pertinent answer.
View 5 Replies
View Related
Jun 15, 2008
I have a WD MyBook 1TB external hard drive. It's a replacement for a LaCie drive that I broke accidentally. Because I broke my LaCie, which held all my backups, I need to do a full system backup so I have one on file. (I'm running Windows Vista Business SP1 on a Compaq Presario laptop. I've tried this both before and after SP1 and have got the same result.)
The weekly file-only backups I have scheduled with Windows Backup work fine. It's only the full system backup that gives me problems. Everything goes as planned: I select the MyBook as the destination, and Windows starts the backup. Once it gets near the end (I'd say about 90% done according to the status bar), I get the blue crash screen. Here's what it says: DRIVER_IRQL_NOT_LESS_OR_EQUAL Stop: 0X000000D1 (0X00000004, 0X00000002, 0X00000001, 0C807503FF)nvstor.sys - Address 807503FF base at 8074C000, DateStamp 458d543d It doesn't restart after that, it just sticks on the blue screen. I have to shut the computer off and then turn it back on to do anything.Can anyone clue me in on what might be going on? I thought maybe my driver was out of date, but Windows Update can't find a newer one, neither can it when I go into the device's properties. Unless I'm missing something there, or it's something other than a driver issue.
View 4 Replies
View Related
Jun 23, 2008
I've just installed Vista x64 and some applications to work. The the system and the applications are "fresh", proper installed and I would like to create an image of all system (all matrix RAID 0+1) on external harddrive. What software do you suggest for this purpose? Can I do it via ghost.exe from DOS level?
View 9 Replies
View Related
May 11, 2008
I remember with WinXP that if I had my computer turned on and was not using it for a certain length of time (maybe 30 minutes), it would 'automatically' create a 'System Checkpoint' in the System Restore area. I could also 'manually' create a 'System Checkpoint.' What I would like to know is - doees Vista (Home Premium) create such an 'automatic' System Checkpoint if I have notebook turned on, but don't use if for about 30 minutes?
(I believe there is a way to turn on an Automatic 'System Checkpoint' that you can schedule to be done at a certain time. That is not what I am talking about. I am talking about an 'automatic' System Checkpoint' that is done if the computer is turned on, but not used for 30 minutes or more (approximately).
View 8 Replies
View Related
Apr 7, 2010
Every time I try to run System Restore I get an error message saying that the restore was unsuccessful because of an error. Try again with a different date
View 9 Replies
View Related
Apr 8, 2009
It seems no posible to restore the system from previous "restore points" with Vista Bussines. I always get the message "System restore did not complete succesfully. Details: The writer experienced a transient error (0x800423F3)."
View 7 Replies
View Related
May 18, 2010
Daughters laptop was reporting that the HDD was about to fail, should backup and repair.
The concensus of opinion suggested a new HDD was the answer.
Have done that and created the restore disks from the original HDD.
Started the restore and went ok until nearly at the end of formatting the new HDD when I got the message
"error if it happens again contact HP" it did not happen again and appeared to restore files ok, did a verify and no errors.
Trying to boot from the HDD it now fails. Errors report registry incorrect plus others.
Cannot load my Vista version as is 64bit.
I cannot obviously send the errors to MS as the thing will not boot.
Any solutions obvious apart from getting a disk containing Vista 32 bit system
Laptop is an HP Presario running Vista HOme Premium 32.
View 9 Replies
View Related
Apr 18, 2009
Is there any utility built into Vista or XP to allow one to create a complete system restore DVD?
View 9 Replies
View Related
May 31, 2008
I have not been able to resolve my sound and messenger problems that occured after an update. However, when I go to system restore, it only goes back 5 days and I need it to go back 6. Is there any way to restore to a point previous to the points they offer?
View 4 Replies
View Related
Jun 29, 2008
F11 system restore. No luck. safemode nothing...seems like it tries to start then hear the hd grind for 10 seconds or so then black screen.
View 8 Replies
View Related
Feb 29, 2008
My problem is I can't get the "System Restore" to work. Every time I set it to do a system restore, it appears to go through all the right motions. Then after it shuts down and restarts itself, I get an error message: "System restore did not complete successfully. "An unspecified error occurred during system restore." It goes on to say that the computers settings have not changed. What's going on? I've tried several different checkpoints including one that I had manually set myself. None of them work, I always get the same error message.
View 7 Replies
View Related
Jun 8, 2009
I wanted to give my views with regards getting rid of System Restore points when dealing with spy/malware/virus. Through being around forums and newsgroups for a few years it's my belief that it's best to leave whatever System Restore points you have until you have got rid of any virus's you may have. I know it's more than likely that the virus will end up in a Restore point but it is harmless while in there if you don't Restore to that point and if while you are dealing with the virus and going through steps to rid yourself of it you happen to screw up your machine at least you'll have a System Restore point to get you back into a working system, even if it has a virus, you can then try again. When you have a clean machine then you go in and turn off System Restore to get rid of all checkpoints and then go straight back in and turn it back on and make a manual Restore point while there.
View 6 Replies
View Related
