I am trying to set up my dual monitor settings.Here is a link to my current desktop, not embedded because it is rather large. According to the settings, I have the my left monitor as my primary monitor, and my right monitor is my secondary monitor. What is bugging me is that my start menu is on the secondary monitor when I would like it on the primary. If I swap my primary and secondary monitors, my icons move to the right monitor, but regardless of primary/ secondary my start menu remains on the right. How do I move it to the left?
i have only one monitor, and somehow it is being treat as though its the secondary monitor in a dual monitor set up. i cannot view my start menu, or view any programs being opened, as when i try to open them, they presumeably open on the phantom primary monitor. even when i try to open display settings, i cannot see the box. i am able to move my mouse to the left border of the screen and move it off into oblivion, and occasionally drag random folders and short cuts over to view.
I currently have two monitors. The back of this computer has 2 video ports. 1 of which is DVI-I (4 pins next to the long pin) and 1 DVI-D (Does not have 4 pins). I currently have 1 17 VGA ONLY Monitor, and one 19 DVI-I, VGA, S-Video. I have 1 VGA cord, 1 DVI-D cord, and one DVI-I to VGA Adapter.Both Monitors work in the DVI-I slot. Obviously I can only connect the VGA to the DVI-I slot. I have been on intels support site for hours checking drivers, updating bios, etc. Can provide screen shots of anything needed to help with this. When I right click and go to "Personalize" I can click on the "greyed out" Monitor 2, click extend desktop, when I click apply the "working" screen flickers, asks do I want to keep these setting yet nothing has changed. Once I click yes it returns to display settings and monitor 2 is greyed out again.Under "Device Manager" under Display Adapters it says "Intel(R) Q45/Q43 Express Chipset", and under Monitors it states "Generic PnP Monitor"....
since nobody can fix my memory issue, i decided to run vista on my PC. everything went smooth, except when i leave my computer and the monitor goes into "power save" and turns off. when i move the mouse / press a key on the keyboard to turn the monitor back on, one of my screens goes all green and has scanlines running across from it, and its all jagged. when this happens, i cannot even log back into vista, or see anything for that matter. i have no choice but to manuall reboot the computer and log back in. the multi monitor support in vista really sucks, so i installed my nvidia drivers to see if i could use the nvidia multi monitor support and i cannot even find my nvidia control panel. anyways, as a last resort, i installed ultramon, which is a 3rd party multi monitor support program which seemed to work fairly well. but then, when the monitor goes into power save again...the same stupid thing happens.i have currently given up running two monitors with vista, and im running just one until the whole monitor scanline problem goes away.
Vista 32 & Nvidia Is there anyway to set "Horizontal Span" across two monitors? Burnout Paradise has the option to run 1,2 or 3 monitors but requires the Horizontal Span feature. The Extending the desktop to a second monitor setting does not work. Basically I need something that will allow me to set a 3300x1050 desktop resolution across both monitors. I've tried creating a custom resolution in the Nvidia control panel but that didn't work. For those that will suggest Ultramon there isn't a Horizontal span feature that I could find anyways. Browsing Google for an hour or so just came up with others looking for an answer as well. Just thought I'd come to where the smart people are and ask.
Maybe there's a fix this somewhere deep in the forums - I just can't find it. And I've read in other forums the same problem but no one seems to have the fix. Just got a new computer - HP with Vista Home Premium 64bit. Video card is ATI Radeon HD4850 with two DVI outputs. I have twin Acer V223W monitors connected with DVI cables.
I can figure out how to set them up in Vista, and also in ATI Catalyst, setting the default and extending the desktop and all that. I had been running dual monitors like this for years on my former XP machine. My problem is, each time Vista goes to sleep, or hibernates, and even on some restarts it reverts back to clone mode. HUGE pain in the butt.
I have Acer aspire 5310 basic vista with broken screen and I can't extended to the 2 monitor because is not exist in display setting. I can boot to the CRT screen when vista is loading but after Windows can't set the logo and the screen is black.But there is no problem with safe mode I can work with vista.I try to change in advanced setting but there is only one screen. I update VGA intel 945GMdriver..but nothing change.also can't change properties Monitor in advanced setting.
I recently started to use the monitor speakers - previously had the monitor volume turned right down. There is an annoying medium-high pitched hum thru. the speakers. The volume of the hum varies with the volume on the monitor, not the volume settings on Vista. Detaching the 3.5mm sound lead ( DVI lead attached )reduces the hum considerably. Detaching the DVI lead (sound lead attached ) removes the hum. Using VGA lead makes no difference. Have tried different sound drivers, different video drivers, reinstalled the o/s - makes no difference.
As the hum seems to be travelling down the DVI/VGA lead, tried a different graphics card ( with passive heatsink - no fan ) - makes no difference. Took the side off the pc and can just discern the same hum if I get my ear in the right place - from inside the pc. Detached the rear fan - no difference. Detached the mobo fan - no difference. The only thing left is the psu - could the fan noise/vibration be traveling via the graphics card to the monitor ?
I've just got a new computer with Vista. I want to set up a dual boot system so that I can also access XP.
I have read that this is much easier to do if XP is the first OS, followed by installing Vista, but I can't do that.
I have also read that it can still be done by creating a new partition from within Vista, then installing XP into that. I understand that this process will overwrite the Vista boot loader and the computer will then only boot into XP, but that a programme called VistaBoot PRO can then be used to reset that, and you are then left with dual-booting.
But has anyone had any experience of doing this? Or are there any foreseeable problems.
E.g. - when I start installing XP, will it need access to the motherboard/graphics card drivers?
One thing I'm wondering about is, at the stage where I can only boot into XP, the hard disk is a SATA one (no RAID set up) and I seem to recall XP having issues with these at boot-up?
I've just installed Vista Business x64, however I do have some problems setting up the Dual monitors. I have: On the left a Dell 2005FPW, which is pivoted (to read PDFs and stuff like that easier) On the right a Samsung 226BW, which set to normal. However, when I go to the NVIDIA setup, and try to tell which monitor is where and which should be the primary display. The primary display always tends to be placed on the left side in the software. I want the Dell to be the extended display, while the Samsung is the primary display. But the software (either in Vista or the NVIDIA driver itself) insist on that both the primary and the first mentioned display is the same.
Does anyone know how to make the picture on your desktop background extend onto your second monitor rather than having the same picture appear 100% on both monitors in windows vista with an ATI Radeon graphics card?
I have a HP Pavilion computer that has the video card built into the motherboard, I want to run dual monitors on the computer. Can I using the existing video card setup and get another video card to run the second monitor, or do I need to get a dual monitor video card? Or is there any other options for a dual monitor setup. This computer is not for high speed graphics. No gaming on this system. Just need to know the best way to approach this situation or what you would recommend.
I am experiencing a strange power problem with my monitors. I have two, each hooked up to a Radeon HD 800 series video card with dual DVI connectors. The problem is this: When I have my computer working as normal, if I switch off my secondary monitor, and then switch it back on, my primary monitor's display garbles and goes out for a second until my secondary monitor is back on. Also, anything that was displaying on my secondary monitor does not refresh and I can not access those programs. Does anyone know what is wrong and how to fix this?
I run a dual Monitor set-up and that has been fine with previous drivers. Since installing 180.48 yesterday, when I reboot or start-up, it all defaults to a single monitor and messes up my icons. Fault appears to be on the NVIDIA part of things, as it loses the tick in the second Monitor under the NVIDIA Control Panel "Set Up Multiple Displays". It doesn't lose the tick in "Do Not USe SLI Config".
I have a new computer with Vista Home Premium x64. I used a dual monitor graphics card in my old computer with Windows XP. Took the card out and install it in my new computer and updated the driver. But, performance is poor. For example I can't use Vista Aero. I would like to buy a new, relatively inexpensive dual monitor graphics card which is compatible with Vista premium x64.
I run Vista on a laptop and have a 2nd monitor hooked up via a docking station. I set my 2nd monitor (i.e. not the laptop screen) as my main monitor, however, after every restart Vista always reverts back to the Laptop as the main monitor. How can I stop Vista reverting backto the Laptop as the main monitor? (This happens aven though at no stage have I un-docked the laptop!)
I think after this update: Update for Windows Vista for x64-based Systems (KB968389) …my dual monitor video card: PNY VCG86GTS5XWB-OC GeForce 8600 GTS 512MB 128-bit GDDR3 PCI Express x16 HDCP Ready SLI Supported Video Card …sometimes does not bring the second monitor on after waking from S3 sleep. It’s still in dual screen mode as I can see a taskbar window fly to the second monitor. But I have to sleep and wake again to get it to come back on. Anyone else experience something like this? I don’t remember it ever happening before and was wondering if it could be the patch.
Got this dang computer (HP) with Vista Home. It drives me nuts. When I am typing it suddenly does something (maybe called a flicker) and the curser ends up somewhere else on the page.... (and the letters get typed out of place). I have my monitor set for 1024 X 768, I tried to raise the Monitor setting screen refresh rate, but it is set at 60 Hertz and there is no other option for it. If I increase the pixels there is still only 60 Hertz setting option. What is this problem and how can I get it fixed. Getting tired of screwed up text.
I've recently bought a new rig and decided to go with Vista Enteprise 64-bit version on it. I currently have a 30" Dell monitor and a 19" Packard Bell Maestro 190W setup that I used on my previous XP rig. Now, when I try to use my PB Maestro 190" Screen on the Vista machine, I get no signal. I can detect the monitor through the ATI Catalyst program but it cant it to work. The monitor works and shows stuff when I reload the computer, but it goes "No signal" just when Vista Loads...
I have downloaded Powerstrip and another monitor program to try and force it to 1440x900 settings, but still no signal.. Even wrote my own drivers for the screen with a fixed resolution 640x) but no luck. I plugged in my LCD TV instead and it worked like a charm! So i quickly switched the cables between the second 19" monitor and the TV and bam! I got the second monitor up and running! But I had to reload the computer and I lost the output, tried several times again to repeat the procedure with plugging in the TV and then the monitor.. no luck...
I added a second monitor to the GeForce 7100 GS using a DVI-VGA adapter and for the life of me cannot get it to display anything, the monitor is just in sleep mode. I've got the latest driver, Windows is up to date, checked the cables, tried another adapter, tried everything but, still nothing. The second monitor shows up in the device manager and in the Nvidia control panel. It's enabled and set to extend desktops. It seems the system knows it's there because I can move the mouse over, but cannot see anything. The power light on the second monitor just flashes. I've swapped monitors over, to make sure there's not a problem with the display and it's fine. When I do that, the main monitor is then plugged in to the DVI adapter and then that one goes to sleep. Just seems whichever monitor is plugged in to the DVI-VGA adapter just doesn't want to work........
Right now I am running a vista machine with 2 monitors one widescreen and my old one. I keep all my sidebar gadgets to the other monitor so I can monitor temps and system diagnostics. Today, my sidebar is on my main monitor and no mater what I do it won't go back to monitor-2, no mater what the setting is in the sidebar properties. What is going on here?
It has happened occasionally, but with no predictability that I can see. I change settings in control pannel / power settings / balanced to 10 min for monitor and never for computer. I check the "advanced settings" to assure that they are the same. I use balanced because that seems to be the default in the registry. I do not see the actual settings in the registry. Every so often Vista resets the settings back to 20 min for the monitor. I have looked at but it speaks of "System Settings page" - I don't know what that is. In any case, my settings have no effect and I can't get the monitor to dependably go to standby after 10 minutes.
I know this isn't a Graphics Card related thing, but it is the closest I can get.
At the moment I have a Hyundai ImageQuest Q17, and I think it's way to small, that's why I will be doing a student job in the Summer Vacation, what screen do you guys recommend? Here are a few things it should have.
- Good brand, a brand you can trust. - Widescreen - 19' or up - NO reflecting screen - DVI - Compatible with Vista
Recently I have bought a gaming PC, and after a few hours of such gaming, my monitor goes to sleep, the PC is still running and I can still be playing my game. just without a monitor!
The only way to get the monitor to work is to restart the PC.
Any ideas what the problem could be? At first I suspected an overheating Graphics card, but could it be other things? could it be a RAM problem? what could cause this? Has anyone else had this problem?
I would like to make it very clear that it is not a problem with Vista, or its power settings, as the computer remains runnings. It is also very unlikely to be the monitor as I bought it new yesterday.
Been having a monitor issue lately ever since I installed SP2 for Vista 64bit. Sometimes when I turn the PC on the monitor goes into immeadiate sleepode (the power button blinks). I don;t even see the BIOS boot screen....nothing...just black.
I sometimes can hear windows loading but nothing is on the screen. At other times I don't hear Windows loading at all.
I'm thinking it's a BIOS problem or maybe even a MB problem.
I would appreciate some help on this. I've never had this problem before SP2
Weirdness continues....managed to get some sort of display happening only to be told my windows system files are corrupted and that I need to do a repair...which I am doing now after several attempts to get the BIOS to boot from the DVD drive
Well I bit the bullet and restarted the PC...dissapointed to say that it's didn;t work.
It seems like the BIOS isn;t loding any basic video nor is windows.
Sometimes it just doesn;t even seem to be booting into BIOS at all.
I just bought a new Samsung LCD monitor with native resolution of 1920x1080 pixels that provides nice sharp display on my older XP desktop, but a pretty mediocre one as an external monitor on my newer HP notebook. Both systems use nVidia graphics cards, though not identical models. The XP uses GeForce4 MX 4000 card and the Vista notebook came with GeForce Go 6150 (UMA) chip. I wonder if Vista may have something to do with the poorer display or the different nVidia chip alone. I assumed the Go 6150 was a more capable chip and if anything, I expected even a better performance from it. In both cases the display res is set to 1920x1080 at 60 Hz, but the text display from the notebook looks pretty lousy.
I have a Viewsonic 28" LCD monitor (model vx2835wm) which is pretty good, but not the greatest quality to say the least. It is 1080p supported too.
However, I need something of better quality. My question is the monitor *must* have 1900x1080 resolution specifically to be 1080p supported correct, even if it offers higher resolution options?
Higher resolutions, 1920x1200 too, but not 1920x1080 specifically. Would this be a bad idea for Blu-Ray movies (my Sony laptop has a built in Blu Ray player)?
Suddenly my display has a big shadow going to the right on everything. I tried the obvious... turning on and off the monitor and turning off the computer, but still there.
