Windows Vista Home Premium 32-bit
Service Pack 2
Single user
---------------------
I have four drives showing in Computer They came pre installed with my computer.
Removable Disk F
Removable Disk H
Removable Disk I
Removable Disk I
When I click on each I get: "Please insert a disk into Removable Disk I '... same for each drive How do I get rid of them?
So I basically explained what I wanted to do with the title: I want to add desktop icons of removable drives whenever I insert a flashdrive/memorystick/or some other kind of drive. I also want it to disappear once that drive is removed.
This is probably the one feature I want from Macs that Vista doesn't have. The dock is the second, although that's an easy fix with so many dock programs around.
So am I asking for too much with this small feature? Already I have shortcuts of the drive icons on my desktop, but it looks a bit ugly, especially when an icon has a question mark sign on it. And I'm trying to keep my desktop as clean as possible. Last, I'd prefer that the program is free.
In Vista when I go into my computer it displays the space used on the hdds and the remaining space, but for removeable storge it does not automatticaly display it under the device name. Is there anyway I can get this working as it works in win 7 and not vista?
View 9 Replies View RelatedMy Vista Ultimate 32bit, with autoplay is a non-removable drive ( D: ). How to solve?
View 5 Replies View RelatedGiven an internal drive with multiple Vista installations how do I change the drive letter of the boot drive of an installation?
Best explained with an example. Given:
Partition 1: Vista 1
Partition 2: Vista 2
Partition 3: Vista 3
etc.......
In other words, Vista seems to insist on the currently running system living on C: (like in the olden days). I thought since W2K Windows can be installed on any drive e.g. my old system has W98 on C: (no choice there) but W2K boots from and stays on D:.
I have a newly built rig which I dual boot Vista HP 32bit and Win7 Ultimate 64bit. Up until about 3 days ago, I have been able to use my external USB backup drive, transfer music to my phone’s memory card, and use my thumb drives. Now every time I try to transfer something new to one of them, I get this. “The disk is write-protected. Remove the write-protection or use another disk” I booted into Win7, and I was able to transfer files with no problems at all. As soon as I go back into Vista, can’t transfer or delete anything.
View 1 Replies View RelatedEverytime I plugin my portable hard drive I need to create a new share and set the permissions. Is there anyway to have vista remember the share so everytime I mount the drive it sets this automatically.
View 4 Replies View RelatedWindows Mail's export only works to the local hard drive (heaven knows why). vereything works fine up to that point. Then the last step - copying the export from the hard drive to a removable medium fails. Eg I put the export into a folder on the desktop, but it won't copy to a USB flash stick: it gets started and then hangs - suddenly saying it will take 20+ hours to complete. There is no conceivable space issue. How can I do this last step, which is the key step? Have MS put in a spoiler?
View 7 Replies View RelatedI'm trying to fix a computer, they have a messed up display. They can't see anything on the screen, it's like this from the very start of turning on the pc. i have put some images up to help you see the problem.
View 9 Replies View RelatedAcer tech support said do a factory restore and the Vista Forum tutorial instructions didn't fix it.
BTW, I have Vista Home Premium X32, if that makes any difference.
I did install the "Vista Start Menu" freeware and it works, but I want the
original Vista Start button back, I got used to it.
I had a power failure today, and was completely pleased with Vista SP1, about to write a favorable review over the previous Ubuntu install that was on this machine until the power went out. Now it's a brick. Restore doesn't work, and I'll have to reinstall everything...why build restore points and backups if they don't work? All I got was chkdsk autorunning and a blank screen... total BS.
View 5 Replies View RelatedI'm running Vista Home Premium, and after installing an update to my ethernet card that killed my internet connection, I decided to do a system restore. After the restore, and reboot, Vista came up with an error/blue screen, and told me to insert my install disc and perform a repair. I did that, but of course, my DVD-Rom ate the Vista disc, destroying it.
So, after rebooting once more, I get no prompt to repair. I now get a black screen, where I can see my cursor and can move it with the mouse, but absolutely no response from the OS. All I see from the Vista is when it's booting, I get the green progress bar, but after that disappears it goes right to the black screen with moveable cursor. Does anyone have a clue what's happened? With my DVD drive eating discs, and unable to boot the OS, I'm really at a loss of what to do.
I disabled my microphone.Now I can't start the wizard to re-enable it.It fails to start stating no device found.How do I get it back?
View 4 Replies View RelatedI was taking a nap and when I woke up the power supply was dead. I replaced the power supply and have it all hooked up, but I now can't get my computer to boot up. The light on the MOBO is on, and everything seems to be good. One thing I noticed is the CPU fan no longer goes on where it had been previously plugged in. However, if I plug it in elsewhere, the fan works. So, now the question seems to be, is the CPU bad or is something wrong with the MOBO? Does anyone have any thoughts as to how I can test either or any other thoughts on troubleshooting?
View 4 Replies View RelatedA few days ago I upgraded my system to aforementioned specs. I needed to copy data from old Seagate 80 GB IDE drive to my new 160 GB SATA drive. What was really annoying that when I tried to copy a file from IDE drive to SATA drive for example a file of 650 MB started with great copy speed but gradually slowed to a crawl and it took a long time for me to transfer data.
View 6 Replies View RelatedIf someone could direct me to where that information might normally reside in Home Premium Vista.
View 5 Replies View RelatedI have fixed a few problems with my computers based on the information here. This is my first post. Last night, while playing Sims 2: Apartment Life, my moniter flickered a black screen twice and then froze. Almost immediately after I got a blue screen of death, however the computer shut off faster than I could read. So, this morning I turn on my computer and nothing. I got the white text and the nice big 'e' for emachines with the Boot and Bios keys listed. Then the monitor went to standby. I turned it off and then back on and tried to get boot settings so I could start up in easy mode - thinking something happened to my drivers, but same thing happened, monitor went on standby.
So, I turned the computer off, opened it up and took a look inside. A little dusty, but everything was plugged in right and I made sure the video card was secure. I took the plug out of the video card and put it in the default on board thingy. Started it up, same thing. So, now I'm thinking, '****, my card died'. 'Cept when I turn the machine on the fan starts up. So, I'm confused. I take the card out and start up the computer and BAM, it works. So, I'm still thinking its a dead card. Well, I try a few things, like uninstalling the old video card drivers, restarting and plugging the card in during restart. WIth the moniter still plugged into default and working correctly, I check Device Manager and what do you know?! It lists my card and starts trying to install the drivers. So I go ahead and reinstall the drivers. Says I need to restart, so I do. Sure enough, the monitor just goes to standby like before. Doesn't matter what I plug it into. So I take out the card, plug it into default, and go into my BIOS. I make sure it's reading my video card from the PCI-e slot and such, which it says it is. So, now I'm just confused......
I had a power failure today, and was completely pleased with Vista SP1, about to write a favorable review over the previous Ubuntu install that was on this machine until the power went out. Now it's a brick. Restore doesn't work, and I'll have to reinstall everything...why build restore points and backups if they don't work?All I got was chkdsk autorunning and a blank screen... total BS.
View 5 Replies View RelatedI tried to connect my computer to my HDTV and Vista decided it didn't want to load. It would get the to initial Microsoft Corporation load screen with the scrolling green bar and instantly lock up. Wen't back to my normal 19" monitor and had the same problem. It would boot into safe mode - after hanging on crcdisk.sys for an extended period of time (around 10 minutes). System restore didn't fix the problem. I started playing with components which turned out to be a frustrating game of trial and error. I narrowed the issue down to one of my hard drives (I have 4). When it is unplugged, everything is all good. When I connect it again, Vista locks up on boot. So does Vista point-blank refuse to start if there is a faulty drive in the mix? Keep in mind that all it had on it was movies and games, no crucial system files. And would anybody hazard a guess as to what has happened to the drive, and if it is recoverable. It's a Seagate 500GB.
View 4 Replies View RelatedI had my hard drive from my laptop die a few days ago. I was able to recover almost all of the files except for a few Windows file to an external hard drive enclosure. The old laptop was a Vista Home Premium unit and the new laptop is Ultimate. If it's of any consequence or usefulness, the recovery software I used was from R-Studio. How my files and programs to the new laptop I'm using? I contact Gateway for support and they were useless. Windows was not the issue, it was a faulty hard drive.
View 4 Replies View Relatedim installing AvP 3 and i just cant do it.
apparently for some reason the dvd stops reading...
when i enter "my computer" and try to go into drive d(my dvd) it just crashes,
then i have to wait from a range of 5 mins to 1.5 hours for windows explorer to restart...
and the game installation crashes too...
that happens with other dvds and cds too.
i have changed various dvd drives from various companies and i have updated all of their drivers...the problem is consistent.
im tired of buying new dvd drives and throwing them away for nothing.
obviously its a vista issue cause on my old pc everything works just fine(i have xp on that one).
most of the games i just copy the dvds files on my portable harddrive using my old pc and then do the installations through that harddrive on my current pc...
but this game is a "steam" game and that wont work...
any ideas?
ps:its not a hardware issue,its definately a windows vista issue.
I just found this forum while looking for a solution to rename the "Removable Disk"s on Vista (I.e.: set them with a significant name). It looks great so I decided to subscribe and share my little knowledge about Vista. Well, it's actually mainly to ask you to share your knowledge with me. Here is my story: I have installed BitDefender Antivirus 2009 on my Vista Ultimate x64 and experience two big issues. I have reported those issues to the BitDefender's technical support but it's the weekend, so not yet any answer...
First, Firefox 3.0.4 crashes when I exit the browser if I keep the BitDefender Antiphishing add-on enabled. Everything goes fine if I disable it (from the Tools/Add-ons pane of Firefox, not from the AntiPhishing's right-click menu). I didn't see a lot of people complaining about this issue yet. Do you know something about that and maybe how to solve it? Next, the Bitdefender services stop to run when I wake up my PC (I.E.: after a "standby"). And the following message appears in the System event log : "The BitDefender Virus Shield service terminated unexpectedly. It has done this 1 time(s).". This one is really a big issue as I often use the Sleep mode instead of a real shutdown... meaning that I will often be without any protection when I wake up my PC... Did someone else experience the same issue? If I get answers from BitDefender (I hope I will... as I paid for the licence), I will post them here.
I have a Dell computer, had it about three weeks. I have two hard drives in a serial ATA Raid 0 stripe 500GB each. They are controlled by Intel matrix storage manager software. I want to have the two hard drives separate, like drive C and Drive D In the Bios I have two choices ATA or Raid, I have tried both ways to have them separate, however still can't. I have to say that I found this forum by chance, by goodness I am glad I did with drivers for my scanner and printer.
View 9 Replies View RelatedI installed an update today (USB composite device dc3d) and it changed my DVD RW drive from "hard disk drive" to "devices with removable storage" I think DVD RW drives are supposed to be classified as "devices with removable storage" I was wondering if this #1 Matters #2 is correct #3 will cause any problems. Any thoughts? What does your "my computer" view show your DVD RW drive type as.
View 4 Replies View RelatedA Vista SP1 Home Premium problem - 9 live icons covering 9 dead icons: Several days ago I had a desktop with 9 live, working icons at the bottom of the desktop. ie: recycle bin, computer, network, control panel, etc. The 9th icon was a folder called 'powershell'.
Several days ago I deleted the 'powershell' folder, and, underneath that folder, was surprised to find a dead copy of the 'powershell' folder. The deleted 'powershell' folder was in the recycle bin, and an undeleted dead copy on the desktop. This dead copy cannot be accessed with selection, left-click, or right-click operations - so the 'Properties' info cannot be displayed.........
I have an old Dell Dimension 8250 test PC that I would like to install Vista onto. However, it has no DVD drives. I cannot even boot from external USB drives (3.5" disk drive, external HDDs, and DVD burner drive -- CMOS doesn't see them and found out PC doesn't support bootable USB devices). However, I do have enough HDD space (30 GB free on second partition) to copy Vista DVD (or make an ISO file) onto it through network (will take a while).
View 9 Replies View RelatedI've just got my new computer (Windows Vista Ultimate) and despite it coming with just one hard drive (if I'm not mistaken), when I open Computer, it displays two different hard drives: "OS_Install (C [102 GB free of 231 GB]" and "New Volume (D [465 GB free of 465 GB]".
Anyway, how, instead of working with this bizarre set-up, could I "merge" C: and D: into one hard drive (in Windows Explorer's eyes, at least) so that I do not have files arbitrarily split into two?
Was just checking some information in my pc, and i noticed both of the Hard drives were quite hot, theres no problems with the fans or anything in there so im not sure if theres a problem or they just get like that. The pc has been on for alot of the day and alot has been installed on it since they are new.
View 7 Replies View RelatedWhy doesnt my CD/DVD drives show up in My Computer?! Everytime I reinstall VISTA it appears, but after a while theyre not there? And when I put XP on the machine, it never happens. Only in VISTA, first I thought theyre not supported but when I first install VISTA theyre there...then as I said...give it a month and they dont show up and when I put a disc in nothing happens and I cant even type in their location ex. D:/ WHY?
View 6 Replies View RelatedI have been plagued with this problem on my Desktop, wherein the DVD drives go missing at random time intervals.
1> Checked the BIOS, both drives are shown (Tried the NATIVE and LEGACY settings)
2> Checked the cables and power supply ( Have put in a new PATA IDE cable for good measure)
3> Updated to SP2 thinking it would have a fix!
Searched Google and tried these Solutions
4> Uninstalled 3rd party Dvd writing software, which i had installed after discovering this problem. (Never had installed iTunes, roxio or zune software)
5> Checked registry values at HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlClass{4D36E965-E325-11CE-BFC1-08002BE10318}
There were no Upper or lower Filters entries.
6> Tried the Auto Fix at "http://support.microsoft.com/kb/314060" this doesn't work as it says Computer settings already match.
7> Then tried the auto Fix it.................
i've googled this issue all over, and though i've found many people with the same problem, none of their 'fixes' have worked for me. hopefully you guys can come up with something (without reinstalling vista again!) to make it work. as a note, i'm running Ultimate x64 and all of my hardware specs are more than enough and i'm pretty positive that's not the issue.
suddenly, in the middle of normal usage, my drives were no longer recognized by my computer (optical and virtual drives). they do not show up in "Computer" or disk management. they are recognized by the BIOS. i had DaemonTools installed at the time, it was the latest version; i've read that could be an issue. i have absolutely no idea how to get my drives recognized again - i've got some work i really need to get done and haven't been able to fix this............