DVD Needed To Boot
Feb 27, 2009
I've just re-installed my os to Vista Business. I origionally had Ultimate, but I didnt need all the features for gaming and editing videos and after a while my computer got really slow and the registry cleaners just didn't do it. I just ran a clean install and now every time I boot up, I get the blue screen of death, unless I leave my origional Vista dvd in the drive. I've done a lot of research but haven't found anything on the topic. I have run all of the start-up repair features and i've gotten nothing back at all. This problem just gets really anoying considering I only have one drive and I have to keep putting the disk back in to start up again.
View 4 Replies
ADVERTISEMENT
Mar 29, 2008
Post in reply to: Robert Right click "Computer" and select properties. Select "Advanced System Settings". On the Advanced tab click the button labeled "Settings..." in the "Startup and Recovery" section. You should be able to figure out what to do on the Startup and Recovery dialog.
View 5 Replies
View Related
Jul 7, 2009
Can someone please guide me as to what services are really not needed in vista services?
I am unsure what to set as manual, disable, or, automatic?
View 6 Replies
View Related
Mar 23, 2008
I have a new desktop that is compatible with Vista 64 bit. That would give me the use of the 8 GB of ram.
Two questions:
(1) Where can I get the drivers that would be needed for my computer to run the 64 bit version? I haven't started the machine yet, but would run it a while with the 32 bit version. I assume I would download the drivers, then install the 64 bit version.
(2) Is it correct that any programs or hardware compatible with the 32 bit version will run with the 64 bit version, even though there will not necessarily be any improvement in performance?
View 8 Replies
View Related
Mar 23, 2009
My vista 32 install slowed down so much that I did a full install from scratch. Since the professionals say dead registry entries don't hurt ( see posts at Registry Cleaner ), what is it that might cause vista to get slower and slower?
I've heard it often said that windows seems to just slow down over time, and it seems to be true in my experience as well.
I'd like to know how to get my system running great without needing to reinstall..
Yes, I know this is a vista 64 forum, in fact I'm now using vista 64, not 32. But the general question should still apply: why do windows os'es (32 or 64) seem to bog down over time?
View 2 Replies
View Related
Apr 7, 2009
I am after a new graphics card for my computer but i need some advice as to wether it will run on my system or not.
I currently have an Nvidia Geforce 7300SE. and would like to upgrade.
Here are my system specs
OS
Vista Home Premium 32bit
CPU
Intel Pentium D Motherboard MSI Ms-7301 Memory 2GB DDR2 Graphics Card(s) Nvidia GeForce 7300SE Sound Card Realtek HD audio Onboard Monitor(s) Displays Samsung 19" widescreen Case Coolermaster Elite 334 Cooling x1 90mm blue LED front, x1 120mm blue LED rear
I have found this card and would like to know if i can use it.
BFG Tech - BFG NVIDIA GeForce 7900 GT OC 256MB PCIe
View 9 Replies
View Related
May 2, 2008
I have Vista x64 Ultimate & Netgear DM111 modem which connects throuh PPPOE, but just recently iv noticed it suddenly & frequently disconnects & when it redials, all i cud get is an error ''TCP/IP CP reported Error 31'' along with TCP/IPv6 reported error 733'' but when i boot its all OK, it happens only when i disconnect like for eg: when the power cuts or if im not sure even when i use utorrent & when it consumes 100% of network etc. ive even unchecked ''Allow the computer to turn off this device to save power'' Not sure why this is happening, i have no problem in rebooting & everythings back to normal, but its an hindrance everytime rebooting!!
View 6 Replies
View Related
May 11, 2009
This is my current setup in Control Panel>Programs and Features>Turn Windows features on or off.
To be frank, I haven't a clue what most of these features mean or do, and Help and Support has nothing to explain the function of the majority of them.
For example, if I rest my cursor over Microsoft Message Queue (MSMQ) Server, it tells me that it 'Manages and Catalogues removable media and operates automated media devices'.
Because I do use SDHC Memory Cards, USB Memory Sticks, Cameras, Card Readers and other sundry media hardware, should I then have this box ticked? If not, then just what does this feature relate to, or do?
Similarly, what the heck is the TFTP Client, and what does that do?
Advice about the other open boxes and their functions, would be appreciated, with the exception of Games, which is self-explanatory, and something I have no interest in anyway. Recommended settings with reasons for activation, will help me understand these features.
View 9 Replies
View Related
Oct 18, 2009
My NIS 2010 runs out in 15 days, and instead of paying them $60 for another year I'm wondering if it's safe enough to just use MSE and the built in firewall.I never had any complaints with norton, it worked great, never noticed it at all, but I just can't justify spending $60 for something is MSE is at least or even almost as good.I haven't seen many independent tests of MSE,while I know that Norton is one of the best at detection and removal.
View 4 Replies
View Related
Mar 23, 2008
I just purchased a HP laptop with Vista Home Premium (OEM) and want to = do a "Any Time Upgrade" which is offered on one of my menu. Question:
1.. Is a "anytime disk" needed for this upgrade? Or
2.. Can I use a Vista Ultimate (Upgrade) dvd for this upgrade the same = disk I used for my desktop installation?
View 7 Replies
View Related
Feb 15, 2008
having 2 gb of 1333 mhz DDR3....apparantly not enough if disabling the pagefile. So i bought 2 more sticks some 5 weeks ago, installed it and every 5-10 min i had a "hang-up" and needed to force down and then restart. Needed to remove the memory and then i saw it. It clearly says on the sticks 'OCZ3G13332GK' (the first G is for Gold), should have been 'OCZ3P13332GK' (the P stands for Platinum). The only difference here is the latency speed. So i returned the memory and yesterday i got the right one. Surprise .... surprise, 'hang-ups' are back. So the question : does anyone know if there is a problem with the memory when handling 4 sticks or could it be the Asus board? (P5K64 WS MB S775 Fsb1333 Q P35 4DDRIII13 4xPe16). I opened the case the first time i had problems put a fan before it, this did not make a difference. Didn't try this now.
View 4 Replies
View Related
Jan 1, 2009
I went to turn it on this morning, I just had a black screen showing the following words;
Press F2 to run
Press F11 to boot menu
Auto detecting PRI Master Atapai CDROM.
It then went to reboot and select proper boot device or insert boot media in selected boot device and press a key. I went into the BIOS to change the boot order and inserted my Vista home premium 32bit. I then got windows is loading in files. After a short while I got the black start up screen with Microsoft Corporation but after a few seconds it just froze. Moments later it went to a blue screen with white writing part of which said the following; A PROBLEM HAS BEEN DETECTED AND WINDOWS HAS BEEN SHUT DOWN TO PREVENT DAMAGE TI YOUR COMPUTER.
View 9 Replies
View Related
Aug 23, 2008
I am fairly new to the forums, and VERY new to Vista x64. The machine is new, and I was trying out some apps and games, I was in Secondlife when I got an error messege saying I was out of memory and needed to free up memory. I shut down the app and restarted it. Runs but I watched Task manager and saw my free memory down to almost nothing after an hour or so. The cached seems very high.
I did alittle research and decided to set a second page file on my 1TB hard drive, (OS is on the other HHD's )( regulated by system for size ) I'm not really sure whats going on. Example of just task manager and this page openis attached. Again, any help would be great in getting the memory set up on here optimal.
View 9 Replies
View Related
Apr 7, 2008
i can no longer boot up my computer as the boot/bcd file is miising or corrupt i found a windows artical on how to fix it and it didnt work ive also tryedd googleing the problem and got many results but none that seem to fit the problem or are helpful what can i do to solve this
View 9 Replies
View Related
Oct 8, 2009
I have a Dell Inspiron 530 Desktop and every now and then it won't boot up. I get a black screen with 'Windows Boot Manager' ," Windows failed to start. A recent hardware or software change might be the cause."
File: BootBCD
Status: 0xc000000f
Info: An error occurred while attemping to read the boot config data.
When I boot the PC with the Installation disc, it repairs it and it works until the next time. When I click on the details to see what is to be repaired, this come up:.......
View 9 Replies
View Related
Mar 23, 2008
I have windows xp installed right now and I dual booted with vista by re-partitioning my hard drive. After encountering problems with vista I delted the vista partition and resized the xp partition back to it's original size. I am now stuck with the windows vista boot loader which persistantly telling me that the windows vista files are not present etc. etc. Is there any way that I can delted the vista bootloader and go back to using the xp bootloader?
View 8 Replies
View Related
Jun 3, 2008
Vista used to boot up very quickly. Now it spends ages on the page with the "loading" bar. Is it performing some sort of CHKDSK during this time? I only have sidebar and rocket dock starting up, and it's fast again when it gets to the desktop, it's just that loading bit takes quite an ages, and it didn't used to. Virus/spyware/malware free. How do i find out if it's doing some sort of chkdsk at boot?
View 9 Replies
View Related
Oct 12, 2009
I built a new machine.Running Vista Home premium,8GB of Ram,Phenom11 3.2MHz.
I have 2 hard drives.First one portioned to C: and D:
Second HD portioned into D: and E: I have Vista on C drive.I would like to Dual Boot Vista with Windows7.
My question is do I need a Boot loader application or does vista have the ability to dual boot?
View 9 Replies
View Related
Mar 23, 2008
I have more or less completed all the driver upgrades and windows updates but I keep getting repeated boot failures of Vista. I can always get into Safe mode but in Normal mode the boot fails just after the first spash screen at the point when the screen goes blank to be replaced by the small circular Vista logo. After 2 or 3 attempts it succeeds to load but then the problem seems to reoccur, particularly when I have been back to XP for a while.
I had a similar problem with XP but that seems to have sorted itself out. I have tired looking in the logs for faults and failures but no clues there. I am running an ASUS P5E MB with Intel Quad 6600, 4Gig RAM, GeForce 8800GT and 2x250Gig HDs.
View 7 Replies
View Related
Apr 16, 2008
This is the best install I have ever done (or was)…I did a fresh install and followed a tweak which was to very enlightening, to say the least. From there I have been to a few other sites and moved on to fully customizing my desktop/login and……well…this is where I stuffed up…My BOOT screen no longer works properly, even with the original “winload.exe.mui” file replaced.
I downloaded and used “Vista Boot Logo Generator” I loved the results on my last install…It worked well. Upon deciding to do a fresh install with Tweaking in mind, I simply coppied over a Boot logo I made previously after allowing permissions and all that as well as changing the NO GUI in msconfig…ect….BUT......
View 6 Replies
View Related
Jul 29, 2009
i am new to this forum but i have problem with my system bootup. my system takes too long to boot and it started 3days ago. it takes about 120secs at bootscreen alone. i believe it is not my start up programs as it takes about 3 secs to start up from login page. i donot use any third party bootscreen. normally, my system boots in 30 secs but now i am facing a lot of problem which i do not understand. i have tried all the tutorials in this forum relating to bootup problems but found no luck.
View 6 Replies
View Related
Mar 24, 2008
XP is on 1st primary partition [active] and is old. Vista is on 2nd Primary partition and is new. Dual boot info, I believe, is all on the XP partition. Soon I will want to go to Vista only. Do I just delete the XP partition (after imaging it, of course!) and set
Vista partition to active? (Paragon Partition Manager). Will it then automatically boot into Vista (which has no boot.ini)?
View 5 Replies
View Related
Jul 1, 2008
I've had Vista x64 installed for about 2 full months now and I've recently begun having a lot of problems. One being: 187 seconds. What the hell? Before you ask, here are my specs. Lots of fast memory, a fast processor, 7200RPM boot drive (not listed), and ****ing awful performance. What gets me is that the delayed boot time is before I even see the "Welcome" screen.
My current boot time distribution:
1. BIOS does all its fancy stuff very quickly (about 6-7 seconds or so)
2. I get to my boot loader and it defaults to Vista after 5 seconds (dual-booting Vista/Ubuntu).
3. I then see the Vista loading screen (black screen with green loading bar) for about 4-5 seconds................
View 5 Replies
View Related
May 21, 2008
I need to do a CD/DVD Boot and I cannot find the option in the BIOS Boot Menu.
View 4 Replies
View Related
Aug 31, 2008
hp tool ask to do this "Then please go to using DOS system files column and add the link to where you stored the unzipped DOS boot up files. "so my question is , where can i get the "dos boot up files" for vista64? with the hp tool i need to locate the dos boot file address . so how do i do that? do i have to download vista64 boot files? every google links explains how to do this with xp. couldnt find any for vista. makes me feel like im the only person on the planet using vista.
View 4 Replies
View Related
Mar 23, 2008
I have installed Vista on my C: disk. After that I installed XP on D: disk. Now I can't boot Vista anymore.
I tried with boot.ini. I've read that there's a program called bcdedit.exe. I tried to make that one work on XP, but I failed. I don't have Vista's DVD, and I'm trying to avoid installing XP again. If there's any way around...I would be gratefull! (Is there any way I can edit bcdedit.exe in XP?)
View 5 Replies
View Related
Mar 8, 2009
I was running dual boot fine between XP and Vista now im running both Vista it only reads my newly installed drive on boot and i have no boot options as you do in XP/Vista installs, im a newbie to dual drives and was wondering how to set it to have boot options now!
View 5 Replies
View Related
Mar 26, 2008
I searched all over the internet for this simple (I think) problem, but I couldn't find any solutions. I have installed Vista on my C: disk. After that I installed XP on D: disk. Now I can't boot Vista anymore. I tried with boot.ini. I've read that there's a program called bcdedit.exe. I tried to make that one work on XP, but I failed.
View 5 Replies
View Related
Apr 10, 2009
I once read a post about a boot menu reappearing on every boot. Did a seach on google and found as the 10th result the post I needed (i recognised the text in the preview shown). Search on google 'site:www.microsoft.com boot menu'Found:But......that thread no longer exists. Also I cannot find that post again.With this post result? With a boot menu reappearing?
View 4 Replies
View Related
Feb 6, 2009
I have a HP pavilion laptop which came with 64 bit vista ultimate pre-installed. I shrinked the OS partition (160 GB), created new partition (40 GB) for 64 bit windows 7 ultimate. After installation of Windows 7, I cannot see the vista ultimate boot option when I boot my PC. When I boot into Windows 7, I still can see the vista partition. But instead of C: it is now displayed as E: I used the HP Recovery Disc to repair windows vista but I can only see a blank blue screen with the mouse pointer. How can I recover the vista?
View 9 Replies
View Related
Jul 29, 2009
The other night I was in a rush and I held down the power button until it shut off. the next day I tryed turning it on and after the MB homepage came up for 3 secs on the top left hand corner of the screen it said "Disk boot failure, please insert boot disk and press enter" so i fooled around with the priority settings a little bit and nothing worked. I then inserted the windows vista CD and it would say "Loading windows files" then the loading bar came up and it would always freeze at the same point and after about a minute a blue screen came up saying a problem occured and is shutting off the computer to prevent further damage. Iv tryed everything. could my hard drive be damaged or something? Please someone help me. I cant work with much because i cant even get into windows! :-( All i can work with is the Setup menu
View 9 Replies
View Related
