DVD Burner Won't Working
Jun 2, 2008
I insert a blank DVD and the computer won't even recognize that there is a disk in the drive. I've used these blank DVD's to burn movies on several other computers, and those DVD's that have movies on them, from the exact same stack of blank DVD's open up and play the movie perfectly, it's only the blank DVD's that are not being recognized...... This is really frusterating.....
The device is a SONY CDRWDVD CRX3102 SCSI CdRom Device it will recognize blank CD's but not BLANK DVD's..... I swear I've burnt DVD's using this drive before, but now it's not working.... am I crazy? or just stupid? What am I doing wrong.
View 5 Replies
ADVERTISEMENT
Sep 25, 2007
I'm looking for a DVD burning software for Vista X64.?
View 5 Replies
View Related
Jun 30, 2008
I'm using Vista Home Premium and over the past year have burned approx 100 DVDs without any problems using Roxio and Windows. I started having problems with burns being successful till finally every time I tried to burn a DVD it failed and I wasted a blank. The DVD drive itself works fine so I reformatted Windows in an attempt to remedy what I thought was a software problem to no avail. Every time I attempt to burn a DVD, no matter which method I try, the burn fails.
View 4 Replies
View Related
May 16, 2009
I am trying to make an audio CD. Using CDburnerXP however it isnt' recognizing my burner. I have a HP notebook dv7 vista 64. I had previous troubles trying to burn movies. I am afraid I may have deleted something I shouldn't have. Does anyone know how I can get the drive to become recognizable? Is there drivers I need to go back and download?
View 7 Replies
View Related
Jan 24, 2009
I am using an audio editor called WaveLab Essential 6. When I create a CD Montage of songs and try to WRITE to CD, it opens up the WRITE CD dialogue box and shows my device as Optiarc DVD/RW AD-7580A. Everything seems fine until I choose to WRITE. At that point, it shows that the CD creation progress is 100% and says that the CD was created successfully. The elapsed time shows 5 seconds and Saved Data shows 52.12 MB (5'9'' of audio). The real problem here is that the CD is still blank and nothing was recorded on it. Can anyone recommend a solution to get this CD Burner to actually write? It works fine in Media Player. I am using Windows Vista, Intel Pentium Dual Core, 3 Gigs, the CD drive is listed above.
View 7 Replies
View Related
Mar 23, 2008
I bought a new ASUS M51SN laptop last month running Windows Vista. I have subsequently loaded MS Office 2003, Skype, Norton SystemWorks and NERO8. I recently upgraded Vista with SP1, Nero, Skype and Norton to their latest versions and the ASUS Bios to 304. While I had a number of software problems prior to these upgrades, I placed my faith in the Vista upgrade, but am still left with a number of irritating problems.
My DVD burner has disappeared from Windows and Norton while Nero is still happy to test it (Diskspeed). The device manager says everything is good, but I cannot see the DVD in either Windows Explorer or My Computer. In the event log, I can see that the unit has encountered a number of bad block events, as well as a number of errors during a paging operation...............
View 5 Replies
View Related
Jul 27, 2008
Does anyone have any information about a Lightscibe burner that will burn to CD+R, all I can find is CD-R burners. Preferably Sata link Seems to have beaten everyone. OK, How about any burner that will burn CD+R.?
View 6 Replies
View Related
Jan 1, 2008
windows vista 64 recognizes my plextor 716a ide dvd rw in my computer but when I try to use any of the windows apps to burn something it says no burner detected. I tried deleting the filters and it still did not work.
View 6 Replies
View Related
Sep 28, 2009
which dvd burner shud i use for vista. it does not allow nero 6 and also where from can i download it?
View 6 Replies
View Related
Apr 13, 2009
I am having problems with my burner in vista... I was using freeware software (burnaware) to burn dvd's and it was working fine the past 3 weeks... then my fiance downloaded vista updates and now the software, any of my software actually is giving me an error message that there is not supported burner detected. not really being computer savvy, what can I do to get this resolved?
View 4 Replies
View Related
Mar 12, 2009
Most posts want advice on how to resolve an issue with existing hardware or software. I'm asking for advice on what to buy to avoid any issues. I need a SATA DVD burner for my new x64 build. So far I just have the case, power supply, and processor. In my wish list is the RAM, MB, HD, and OS. Each has been verified to at least "work" with x64 Vista according to the MS compatibility list. Now I'm looking for a DVD burner that some of you existing x64 users have installed and like.
View 4 Replies
View Related
Jan 24, 2008
I have two SATA burners installed with Vista x64, they burn fine but burst rate is only 14 mb/s when it was 60 mb/s on XP Pro
Does anyone know what driver I might have installed that I shouldn't have or need to install?
This is a Asus P5K Deluxe P35 chipset board.
View 9 Replies
View Related
Dec 11, 2009
I have a compaq laptop - only had it a month! & have Vista Premium home edition. Things were great with it till last night - tried to burn an Audio CD using "Cyberlink Power2go" and error message "no burner available or you do not have access to the burner" appeared. Used this program before without any probs so thought it might be a problem with the disc, tried another got same message, so I stuck in an original DVD to see if it would read that OK.
View 5 Replies
View Related
Sep 20, 2009
I wanted to create a data cd with some files/programs on it that i got off the net and it wont let me. Is there any good free software to allow me to do this?
View 5 Replies
View Related
Feb 15, 2009
I am not computer-wise. I have brand new HP laptop with Vista Home Premium. I am new to Vista. I burned two DVDs that will play on my computers, but not on any stand-alone player. Exploring the discs, I see they are lacking the folder AUDIO_TS, which I thought was mandatory even though empty. 1. Am I right to infer that this is the problem? 2. How do I fix it? (I believe the discs were burned with Windows DVD Maker product version 6.0.6000.16386). 3. If this is the wrong tack to pursue, what questions should I be asking?
View 6 Replies
View Related
Oct 15, 2007
Is there a burner for burning my PowerPoint slides to DVD?
View 4 Replies
View Related
Apr 4, 2008
How can I burn a DVD using Vista because all the burners you buy have free software for XP but not Vista.
View 4 Replies
View Related
Nov 21, 2009
My external DVD burning drive was working fine the other day as a matter of fact I had burned 3 DVD's but when I tried to burn the 4th one my computer still detected the burning drive but my burning program (ImgBurn) didn't detect the DVD media. Does this sound like maybe the laser went bad in the drive.
View 4 Replies
View Related
Apr 30, 2008
have windows vista home premium..was able to burn cd's but tried to recently and a box above the place where you drag the titles, says connect a burner and restart.
View 5 Replies
View Related
Apr 6, 2008
i've had my pc for a year brand new, its windows vista and its always burned my cd's now when i try to burn, the message "connect a burner and restart player" pops up
View 5 Replies
View Related
Nov 23, 2009
Was working, now its not --- Why
View 4 Replies
View Related
Aug 20, 2008
I've just bought an Optiarc AD-7170S Sata DVD burner. The problem is, it isn't recognized by Vista. I'm running Vista Ultimate x64. I have a Phenom 9550 Quad, 4 GB DDR2-800, and a Gigabte MA78GM-S2H motherboard. I've tried to download SATA/RAID controller drivers from the Gigabyte site, but Vista doesn't seem to be able to install them, or to properly download them for that matter. I've tried emulating IDE in my BIOS, but that failed too.
View 6 Replies
View Related
Mar 23, 2008
After I installed SP1 today, all third party burning software will not recognize my DVD drive as a burning drive. I can only burn from the embedded windows burning software.
View 5 Replies
View Related
Oct 4, 2009
WHAT COMPUTER SYSTEM AM I USING?: Windows Vista Home Premium with 64-bit Operating System. WHEN DID THINGS GO WRONG?:around the 1st October 2009. WHAT IS NOT ORKING?:my latest 32-bit version of Mozilla Firefox when connected to the internet. my latest 32-bit version of Internet Explorer when connected to the internet. my latest 32-bit version of Opera when connected to the internet. my Skype. WHAT IS WORKING?:my latest 32-bit version of Mozilla Firefox, Internet Explorer, and Opera when viewing a web page that is on my computer (html pages which I have made for example). my 64-bit version of Internet Explorer. my internet connection. here are pictures of what happens when these applications are not working:
View 5 Replies
View Related
Mar 23, 2008
My college aged daughter's laptop formerly worked fine but now has odd networking issues which prevent the system from browsing the internet. The system correctly obtains a DHCP address and is able to ping by name, can correctly run AIM and Microsoft Sidebar but still can not connect the IE7.0 Browser to the internet.
I have read a ton of links here within the Network and Sharing group but I haven't seen anything quite like this before. Even though the I know better, I still went through the exercise of testing for DNS issues as well as the often suggested MTU test but there weren't any issues. I have completely shut off the Microsoft Firewall to no avail. The system came with a free trial of Norton Internet Security but after it expired, I loaded a Symantec/Norton Antivirus (NAV 10.1) and did a complete virus scan which produced nothing. I also did a full spyware scan which also didn't locate any serious malware......
View 5 Replies
View Related
Apr 11, 2009
I am using a windows Vista 32 bit home premium notebook computer for which the wireless network detection has stopped working. I updated the driver for the built in wireless card with out any results. I also tried a plug in wireless card which windows detected and said was working properly and this did not work either. This leaves me to believe that something is wrong with the OS. I can get on the internet via dialup modem and also by the ethernet connection with a DSL modem. I have been to several hotspots that I know have wifi and no networks show up. All critical windows updates have been installed.
View 9 Replies
View Related
Jul 25, 2008
Lately when I've tried looking at different folders and files on my hard drives I keep getting "Windows Explorer has stopped working and will restart." It's driving me nuts, I can barely do anything.
Also, same thing with Internet Explorer...I'm getting real sick of Vista's shoddiness..
View 9 Replies
View Related
Jul 6, 2008
By now it should be obvious that, under the Vista operating system, I have Home Premium, there is a severe overall, general "has stopped working" problem.
Thus far I've experienced:
"Internet Explorer has stopped working"
"Windows Explorer has stopped working"
"Word has stopped working"
"Sherlock Holmes Nemesis (Adventure Company) has stopped working"
"Outlook has stopped working"
"Acid 4.0 (Sony) has stopped working"
"Acid 6.0 (Sony) has stopped working"
"Sound Forge (Sony) has stopped working"
Is it not obvious by now that Vista has a problem, maybe a compatability problem, with everything from Internet Explorer and Microsoft Word to third party programs which cause programs, as I mentioned, even programs made by Microsoft, to "stop working"? Is there no an overall "stopped working" patch or something that Microsoft has released by now?...............
View 9 Replies
View Related
Feb 10, 2009
All of a sudden some of my programs stopped working, for example catalyst control center is supposed to start as soon as vista starts, but now it gives me an error like:
"CCC.exe has stopped working"
Same with some others...
Yes i ran AVG, i ran malware, and superantispyware, none of them finds anything.
I cant even load daemon tools now, it gives me some error: "Engine loading was failed", cant uninstall it, it gives me another error, and some of the programs like netlimiter if i start them from my objectdock dock they automaticly stop working, only when i start them from the normal .exe they dont crash.
View 9 Replies
View Related
Apr 29, 2009
I installed IE8 a couple of weeks ago, and it totally messed up my email. I went back to IE7. I tried it again today after getting a Windows Update labelled "Important". As it said that it was "Windows IE8 for Vista", I thought it was worth trying. Wrong! The bugs are not worked out It changed my home page to "Road Runner", despite the fact that my carrier is Verizon! I once again went back to IE7. I will not try IE8 again until I read somewhere on here that the bugs have been worked out!
View 9 Replies
View Related
Jan 31, 2010
In CMD I would like to use the following command:
route ADD 82.211.0.0 NETMASK 255.255.0.0 192.168.0.1 MATRIX 3 IF 8
But CMD does nothing!
When I try route PRINT it does the same:
C:Windowssystem32>route PRINT
C:Windowssystem32>
I can use ipconfig and PATH:
%SystemRoot%system32;%SystemRoot%;%SystemRoot%System32Wbem;C:Program FilesATI TechnologiesATI.ACECore-Static;C:Program FilesQuickTimeQTSystem
I am the Admin and I start CMD with admin rights in Vista Home Premium.
View 9 Replies
View Related
