who use comodo firewall with media programs like dvd converters etc etc. Ive been trying to make a dvd of personal avi clips into a dvd, now the software i use it allok avi2dvd, however each time i convert the files which works fine, at the end of completion, the fireall pops up and basicly says its going to execute allok bla bla, it says if i use this application and trust it, then press allow, which ive done, ive also blocked it, anyway after that their is nooooo dvd files left at all, which normally it would create the dvd files for me where ive saved them to burn. is this a firewall issue? cause this is really annoying and ill rather not use comodo as a firewall if its going to do execute and delete the files ive just created...just makes no sence to me. iam lost
Can anyone help me with uninstalling Comodo completely? I have uninstalled using windows and everything seemed ok. However, using Security Center, Comodo is still showing as installed. Have tried using Revo Uninstaller and also a registry cleaned. Have also tried Scans with Spybot and Adware but it still sits there in an 'on' state. I have tried to reinstall Comodo but get the message that 'Comodo is already installed and would I like to uninstall now'.When I click ok to uninstall the box disappears but nothing else happens. So it appears that I am stuck with this firewall but there is no way to access it as the only reference to it is via Security Center. The next step is throwing the window......can someone please assist in this. Not too technically minded so worried about any remedies involving regedit or cmd !
After comodo notified me of available updates,i downloaded them, but then at the end the cfp.theme problem occured.I searched the comodo forum and I solved ( I had to run comodo under administrator mode) it but after that, windows no longer recognizes comodo firewall and the security center says that i must enable the windows firewall.
Attracted by the additional outbound protection offered, I decided to install Comodo. I seem to recall (but may be mistaken) that when I installed Comodo on an XP machine, Comodo automatically switched off the Windows firewall and Windows also recognised that Comodo was installed and had taken the place of the Windows firewall. Therefore I was surprised that after installing Comodo on my Vista machine that the Windows firewall was still on and when switched off still told me that I had no firewall. Is this correct behaviour or has my installation not gone correctly? Also, when I first log on I get a pop-up from Comodo telling me that svchost.exe is trying to access the internet - is that valid and what should my response be to set it permanently recognised as good?
I am using Vista ultimate with a new Canon LBP2900I laser printer. If I print with the windows firewall turned on it takes an age ti get a print out, if I turn off the firewall it prints stright away. All the drivers are up to date. In the firewall exceptions the printer is listed and ticked
COMODO Internet Security 3.5.53896.424 Released! Good news! We have just released COMODO Internet Security 3.5.53896.424! What is COMODO Internet Security? COMODO Internet Security is the product in which we have integrated COMODO Antivirus, COMODO Firewall and COMODO Defense+ in a seamless manner.
Our philosophy, as you well know, is about “Prevention” being your first line of defense. CIS now has an AV component however this AV component is there to make Prevention more usable. We believe in a Layered Security Architecture where Prevention - Detection - Cure (in that order) is the components needed for a good security. Of course Prevention being the first line of defense, CIS does not compromise on this philosophy and continues to prevent malware from infecting the PC in the first place. And with the help of the detection technology (AV) built in CIS we can now offer easier to use security technology that has “prevention” as its first line of defense. Download: Free Firewall Download! Best Firewall Software Protection. Computer Security Free Personal Firewall
When I first got my new Sony Vaio model VGN-NS30E, I installed Comodo Security Suite. It seemed like a good idea at the time. I wasn't happy with it and tried to uninstall it. I now run AVG free edition, and Windows firewall. I also now use Firefox browser, and am happy with my set up. I don't really like internet explorer, so don't use it. When I installed Comodo, the HopSurf Toolbar was bundled with it. I did my homework after the event, and found, ( online ) issues with HopSurf
Comodo removed Ask/IAC SafeSurf Toolbar by replacing it with HopSurf/IAC/Ask Toolbar - Donna's SecurityFlash. I have uninstalled Comodo/HopSurf, and when do a search cannot find it, but when I open ie, I get this...........
Been visiting the comodo forums after i installed their excellent firewall that is also 64 bit. Aparently they are developing newer antivirus software to replace their current thats nearing release (next month or so should see first open beta of version 3), & guess what, its also going to be free & 64 bit. If its anything like their firewall, im never paying for av again.
I'm a newbi on this board this is my first post. I just recently upgraded to a Windows Vista Home 64 bit. My old system was Windows xp. I found this board as I was trying to get the Norton security that came on my pc to uninstall. The info on this board is priceless. I was able to get rid of the Norton and have now installed AVAST. My question is should I also run COMODO firewall or just use the Vista firewall. And if I run the Comodo should I disarm the VF. Again many thanks on the Norton issue, I was pleased to find out that I was not the only one who could not uninstall that pos.
Windows Vista Basic sp1. Im using a 3rd party firewall program. In Administrative Tools---Services it shows Windows Firewall status as Started. But, in Security Center it shows my 3rd party firewall being On but Windows Firewall being off. Also, in Administrative Tools---Windows Firewall with Advanced Security is showing Windows Firewall being on in Domain Profile. Is this normal? Why would one show Windows Firewall as On and another show it as Off?
I downloaded Comodo anti virus protection onto my vista homa basic laptop on recommendation of family but it proved to just be a big mess up and i swapped to another anti virus instead but It wont let me delete the folder after uninstalling it, I have tried turning user account control off and have also tried changing the ownership and even looked to see what permissions i do have, I have full control over the folder yet every time i try and delete it i just end up with the error note saying destination folder access denied, and that i do not have permissions to delete this file I don't know what to do I have tried everything I have found through forums too but nothing
My custom built laptop doesnt seem to want to connect to my home network, but the internet cafe downtown has the same ISP and my laptop connects just fine there. The laptop works fine at home wired in but the wireless always returns the 169.x.x.x address. I will be posting the ipconfig / all as soon as im home.
Unlike a lot of people I actually don't mind the UAC running in the background. BUT... When I boot up my machine I get UAC prompting me to allow Explorer to run and the controls for my graphics card. Is there a way to permanently allow these programs to run? In other words, can you set up allowances for individual programs?
My laptop comes with Win vista basic with the hidden recovery all in my C drive. My laptop has 2 partition, C & D drives. Im thinking of installing Win XP in a folder under D drive, is it workable? This will allow my laptop to have 2 OS. Will there be any conflict?
I have a drive letter that's mapped to a network drive by default. When I insert a USB drive it tries to assign itself to that same letter, which creates a conflict and I can't figure out how to access the USB drive. Is there some way I can direct it to another drive letter?
Damn PC games always have issues rising up for me. Well, I recently got World In Conflict, but singeplayer doesn't seem to work for me. Once the resources are loaded in a new game, it closes and the annoying "_________ has stopped working, windows is searching for a solution" window pops up. I tried installing the patch, but that didn't help either. I tried configuring Data Execution Prevention, and ran as administrator. The game is fairly new and it was mean to be compatible with Vista 32/64bit so I'm not sure what's wrong with it.
I have 2 computers, one with XP and one with Vista. I recently got DSL and bought a hub to connect both systems to the net. When I do this i cannot connect to the net with either system. On the XP I get an error about IP address conflict, the IP address is already in use. I have the hub closest to the XP system. The tech had me try to release then renew my IP address in CMD prompt on the Vista computer and it give me an error about stating that an IP address has not been assigned.
WARNING DVD43 is installed on your PC. There is a serious conflict between AnyDvd and DVD43. For the stability of your system it is highly reccomended. Do you wish to do that now. click yes or no. Well I clicked yes. Now I get this FileC:unins000.dat does not exist-cannot uninstall When I went to the control panel, dvd43 was showing up, so I clicked on uninstall.came back that it has been uninstalled.
When my PC was delivered, and evaluation copy of McAfee Command Centre was pre installed. As I prefer to use my own antivrus product as well as Windows own firewall, I uninstalled McAfee. Although it didn't fully install, I removed the files left behind with the removal tool provided by McAfee. I installed my own antivirus product, aVast, and activated Windows firewall. If I look in Security Centre, the is a conflict warning saying that I have two firewalls activated. For some reason, McAfee is still shown as being present as both a firewall and antivirus protection. I don't know how this can be because McAfee is no longer on my computer. Furthermore I cannot find any way to remove the reference to McAfee.
Just just got the new Portal Demo through Steam. When I launch the game it starts for a few seconds then it crashes. Windows tells me that hl2.exe has a conflict, stopped working and has to close. It goes on to say that Windows will notify me if there is a solution. But unfortunatly there is none.
Here`s what I tried----------Here are My Specs: Updated Video drivers--------Vista Home Premium 64 Bit Disabled UAC---------------- XFX 8800GTS 320x2 in SLI Mode Updated Direct X-------------XFX 680i Motherboard Disabled Virus Program--------4x1 Gigs of Crucial Dual Sided Memory Disabled Firewall--------------PC2(6400) 800MGHZ Updated Bios-----------------Samsung 500 Gig HDDx2
There are alot of people having trouble with this Portal game. Some say to disable Services. Some say certain virus programs have to be completely uninstalled. Has anyone else had this problem and fixed it while having similar specs as me?
I purchased a new system with Vista Home Premium and install MS OfficeXp. All of the MS Office programs installed and opened just fine except for MS Outlook, when I open MSOutlook, I receive an error message advising me that Windows VISTA encountered a problem and must close. The the Error message is "THE ORDINAL 6718 COULLD NOT BE LOCATED IN DLL MSV.DLL". MSOfficeXp including Outlook worked find with my "old" WindowsXp Pro system but there appears to be a conflict with Outlook 2002 and VISTA. I have updated VISTA and MSOfficeXp on the Microsoft Website
I wrote a couple of days ago about stuttering sound, and how it would kill my FPS in Bioshock or any other games. I looked in my system info and saw this: <img src="http://img17.imageshack.us/img17/883/irqproblem2.png">
After installing Office 2003 on a Dell 1330 with Vista Home Premium, the default mail tool changed, of course, from Thunderbird to Outlook. I uninstalled Outlook, and the default email tool changed to Windows Mail. I have tried using the Default Programs control panel and other means to change the default email tool back to Thunderbird, to no avail. Each time it starts it asks me whether I want Thunderbird to be the default. Each time I click yes, but the setting doesn't hold.
I have gone through all the usual steps to define Thunderbird as the default. In Windows Mail, the option to change it so that it is not the default is mysteriously grayed out. how to get around this? Windows Mail seems more like a virus to me than a legitimate piece of software. It doesn't even show up in the list of Windows services, so I can't even turn it off! What's so weird about this is that it all worked fine until I installed Office 2003 ... now, I can't change the default mail tool.
does anyone have any reviews on Kaspersky? I was running PCtools firewall plus - but my dell rep said that it will conflict with vista - running dell Inspiron 530 gateway. I also have avast running - would I need both (I disabled windows antivirus but have defender running)
I have a single (lone) windows Vista machine connected directly to the internet via a dsl modem. I just viewed the following in my eventlogs:
"The browser was unable to promote itself to master browser. The computer that currently believes it is the master browser is JAYS. My machine is NOT called JAYS."
My firewall gives me this error message when i try to set it on. "Windows cannot start the Windows Firewall service." I have just installed SP1 but the problem started before that.
I have Vista 32 Home Premium and its an Laptop. And Im using Nod32 as Antivirus protection, but I thought that I maybe should buy a firewall also? Cuz Im using Windows Firewall, (the one in Control panel) but I dont really know if it is really enough, cuz Im using a router with out wires. Ps: On my other computer I tried Outpost once, and it totally screwed my internet, we had to buy some hardware thing into the computer and pay a guy to do that, so maybe not Outpost
I check my firewall options, the firewall is 'off' and in red. I continue to turn it back on, but when I check it again later; it is off again. Could this be a virus, something serious? or is it a setting that I need to change?
I'm really at the end of my tether with this issue - have a laptop which has windows Vista installed. Whenever I boot up the Windows Firewall is turned on. However, towards the end of the boot process, the Windows Firewall turns itself off, almost as if when a program loads it knocks it out. Is there anyway I can do a walk thru' of the boot up process so I can see if I can capture which program or process is doing it? At my wits end.
