Boot Performance: Giving Warning
May 15, 2010
My machine (an H-P Notebook Pavilion running Vista Home Premium 64 SP2 with 4 gigs of onboard RAM plus 4gigs of ReadyBoost and 4gigs of PageFile) is generally running fine but I do install a lot of sofware apps to check them out and often uninstall them if I discover they are useless to me. I used to be an engineer before I became terminnally-ill so I really like utilities. Also, I tweak it frequently closely following the instructions from you really bright guys on the respected forums. Anyway, I periodically check the event viewer logs notwithstanding that health check finds my machine to be generally healthy. I haven't experienced any boot problems other than on rare occasion it will be nearly loaded and automatically return itself to the boot screen with the H-P logo and boot up fine then.
This evening I noticed several critical events under Diagnostics-Performance Operational. I'm pasting a copy of these into this missive because I am wondering if this is anything serious. Naturally, I don't have an original installation disk for the machine thank you H-P but I do have a set of disks that H-P provided me one time when they couldn't get my machine to burn disks from the Recovery partition that came in the first machine I purchased prior to them having to replace it when it crashed during a BIOS upgrade. I also have a raw version of my operating system I purchased but can't use because it voids my warranty.
View 5 Replies
ADVERTISEMENT
Jul 10, 2008
I have an application trying to write to the folder - C:DocumentumcontentXfersend the app is trying to create some new folders and files in that directory. But i keep getting an error that say Content transfer: Could not create the directory for sending content: C:DocumentumcontentXfersend121570333633526426059
View 4 Replies
View Related
Sep 29, 2009
here is my situation i am runnin vista home premium 32 bit
I bought dungeon keeper 2
I installed the game and the 1.7v patch
I followed the directions to put it into compatiblity mode for windows 2000
The game will start get through the intros and to the main menu
Here is when i run into the problem when i click new campaign it will load the hand and the x in the box at the bottom right but you cannot see the map on the screen just black you can here the sounds of when you scroll over where the map should be but no picture i can select the mission and then when it goes in to the game the interface will load but the game is still black no video animations no game nothing also when i try to go to options or pet dungeon from the main screen all it does it lock up in the animation between menus.
View 9 Replies
View Related
Oct 15, 2008
i've installed vista ultimate 64 on my computer. and ever since it either blue screens driver error which i have updated my graphics card. still blue screens
and some time it just randomly freezes the hard drive light flashes but the mouse or keyboard or nothing on screen works at all.
i really like vista but with this problem its forcing me to go back to xp and i dont want to
My Spec:
amd 64 x2 3.00ghz
4gb ram
nvidia px 7950 gx2 graphics card
2 x 500gb sata hd
View 9 Replies
View Related
Jan 2, 2009
Vista keeps crashing. It has given some excuses including memory reference errors and when I click ctrl + alt + delete on one of the less severe freezes it gives a security error dialog box. Now it has decided to crash before it even loads (well, during loading, logon, and post logon loading). I am typing this post from within safe mode, in which it works perfectly. I have suspicions about a mouse driver, but I'm not clear on how to access mouse drivers. Although I'm not sure because of the crashing before loading thing. And if nothing else works, would it be a good idea to re-install vista?
View 7 Replies
View Related
May 5, 2008
Lately, whenever I'm using MSN, something happens to my US International keyboard setting. My keyboard setting is usually at NL - United states International. Whenever I type a " followed by an e for example, it writes: ë. The problem: Now my best guess is that it's something MSN does, but after chatting for a bit, My keyboard setting sometimes messes up. Instead of typing "it's" for example, it types: ""it''s""' It really messes up. "e results in ""e
I have tried setting the keyboard to a different setting and back, but it doesn't work. If I switch to US -United states International for example, it works again, but switching back to NL messes is up again. so far, the only solution I have found to get NL - united states international to work again is reboot my computer.
View 5 Replies
View Related
Sep 19, 2009
This may actually be a Linksys problem, but I hope there's a workaround in Vista. Linksys wireless print server; network of computers (mostly Vista 32, some XP, one Vista 64, one Linux) that print through it to an HP LaserJet 1200 printer using HP PCL 5 drivers. All print jobs are OK, but many of them (somewhat unpredictably) are preceded by a junk page containing a couple of lines of PCL commands ("PJL COMMENT" and the like).
It is not clear whether the junk page is the beginning of the job or the tail end of the previous job -- thus I'm not even sure which computers are generating it. I think the former. That is, I think it is a set of PCL comments sent at the beginning of the job. Linksys drivers are not on the PCs. Instead I print through LPR or RAW protocol (both give the same results) on a TCP/IP port as recommended by Linksys.
I have tried the WinPrint print processor and 2 versions of the HP print rocessor. This seems to slightly change what's on the junk pages but not eliminate them. Printing several jobs in succession from the same computer, I usually don't get junk pages in front of them. But the actual conditions are hard to pin down. Trying to run around and try all the combinations is very tedious
View 6 Replies
View Related
Apr 25, 2008
Just recently (possibly since SP1) a number of web sites that I frequently visit have become inaccessible via my Vista Hoe Premium/IE7 PC. I can access them OK using WinXP/IE7 on my laptop so have no idea what the problem can be. The error message states "The website declined to show the page....This error (HTTP 403 Forbidden) means that Internet Explorer was able to connect to the website, but it does not have permission to view the webpage". With the exception of one site, none of the other four sites require any kind of log-in. I use Norton Internet Security but have disabled web protection to see if that helps - nothing, I've also binned my temp internet files - nothing!
View 5 Replies
View Related
Feb 17, 2009
Vista Ultimate with all the latest service packs and updates install, then installed IE8 RC1.
Installed Internet Explorer 8 Release Candidate 1 and had the following
problems.
(1) Windows would not restart.
(2) required going through Safe Mode startup to get Windows to finish installation.
(3) after rebooting several times, finally got it going.
(4) Aero was turned off after all of this.
Not sure if it was a remnant of Safe Mode or from IE8 RC1.
Note: If you have to reboot, then turn off the PC. Unplug the PC or turn the power switch off on the back of the PC on the power supply. Sometimes just using the buttons on the front of the PC does not remove all power and thus all facilities.
I have seen this many times; demanding a complete power removal before the PC would restart properly.
View 9 Replies
View Related
Jun 12, 2010
I've been running Vista Home premium for a couple of years. Over the past months it has started to slow down, with warning about low memory (2 gig RAM). I defragment quite often.
View 9 Replies
View Related
Mar 23, 2008
My father and brother both use internet mail and when they send any emails on to me in Vista mail I don't get the attachments (one was a .wmv ext) As far as I know I have checked/unchecked ALL the correct boxes in the mail options and my Avast online scanner settings and still I don't get the pictures intended or the attachments. I have removed Norton, checked my firewall settings and still nothing!
View 9 Replies
View Related
Jan 23, 2010
They have done it again. Microsoft geeks take a perfectly goodproduct Internet Explorer 7 and mess it up. They just can't keeptheir dirty little paws off that source code, can they? The URL dropdown now gives you an assortment of locations on your hard drive, something like Windows Explorer.
View 9 Replies
View Related
Jun 21, 2009
I just wanted to ask why this is, a friend of mine has a computer, its not vista doubt. It just Windows XP. So, it shuts down without any error or anything, I mean like your surfing on the web and the computer shutsdown and restarts, what can the issue with this be? I mean, it just turns off, without any warning, It turns pitchblack and the computer turns on agian. I helpt him defregmantating his computer multiple times, but it still dosnt work.
View 7 Replies
View Related
Jun 11, 2008
Whenever I try to convert an .avi file to DVD format, my PC starts the conversion process, and then suddenly shuts down. I'm not sure if this is a Vista problem, or a hardware one, or a ...? I'm not sure what the problem is, but I'm wondering if there's some kind of fail-safe, a breaker of sorts, that shuts the PC down when the cpu usage is above a certain level? The PC does get extra loud when it starts the conversion, so my guess is the processor is really being drained. But if that's the case, shouldn't a dual core processor be able to hand a simple video file conversion? Am I making any sense? Probably not. Is there some kind of test / check / diagnostic tool I can use to assess what's going on?
View 7 Replies
View Related
Aug 12, 2009
My Vista x64 PC is randomly powering off. MSI Neo4 Diamond MB, AMD athlon 64 X2 4200+ CPU, 2G ddr2-800 ram, 1TB and 500GB SATA drives, ATI Radeon HD4350 video card. started a couple months ago. either you get into Vista and are working and suddenly pow... it goes off like pulling the power cord. sometimes it will do it right before the screen gives you the login to Vista..Thought it was a power issue and upgraded a 500W supply to a 750W modular unit. No change... have completely disassembled the unit, cleaned everything, cleaned the CPU/heatsink and put new Arctic silver in.
I can sit in bios all day watching the hardware monitor and the CPU never get's over about 30-31 Degrees C. Voltages are good and steady. as soon as it's booted to Vista, it starts... even sitting idle it will do it. I have Windows XP and Windows 7 RC on the 500G drive. if I boot to either of those OS's, it will run for days without ANY issues... it is ONLY vista that has the issue. I thought it may have been the drive, so I made an image and restored it to the 500GB drive, then removed the 1TB drive from the system... Same issues.
View 6 Replies
View Related
Jul 5, 2008
I have a Vista Business from technet that had reached the end of activation, before I had the new key to reactivate it. Inserted the new key and reactivate, all ok, but I have still a warning that it remains 0 days to activate and the pc rebots.
View 8 Replies
View Related
Aug 25, 2007
WARNING!! Vista Windows Genuine Activation (WGA) Problems: Genuine Microsoft Software Advantage. There is a problem with Microsoft's WGA servers and they are not allowing Vista to be activated as Genuine.
Do not do anything that would require you to reactivate or validate Vista. EX: Windows Updates, Hot Fixes, Activation, etc. Wait a week before trying again to give Microsoft a chance to sort through the problem. If you do not, you will be left with a Vista that is considered not Genuine. If your 30 day trial period is almost up, or you are already in Reduced Functionality Mode, then see: - Read Tutorial
View 7 Replies
View Related
Mar 27, 2009
Do you know how to get rid of the annoying "wireless mouse battery level is critically low" popup? This is a ms wireless laser mouse 5000. It just started doing this about 6 weeks ago, before that it was fine. Did an update install new driver software or something? I just want to get rid of the popup, the mouse works okay.
View 6 Replies
View Related
Aug 31, 2009
I am receving a popup warning that a given device "could run faster" if plugged in to another USB port. I only have two external ports and have been using the same devices since day 1; Logitech receiver and iPhone cable. The only recent changes hardware wise is Dell installed a new motherboard. I have uninstalled the two USB composite devices and reinstalled them, no luck. I have check for updates and non are found.
View 5 Replies
View Related
May 15, 2008
I have disabled UAC on a Vista machine so that I can connect to it from a remote location and change its configuration. However, every time the Vista machine is restarted a window opens above the tray telling the user that UAC is off and that they should "click here" to turn it on. From ignorance or carelessness the user frequently clicks the window and re-enables UAC. How can I prevent this message from appearing? I want UAC off on this machine and I want it to stay off!
View 5 Replies
View Related
Feb 2, 2010
Iv'e been having a warning icon show up in the system tray lately, but I can't right click it, open it, or get any info whatsoever. Not a big deal really, just an oddity thats bugging me. Event viewer just shows normal error and warnings, although one DID show a reg. leak. Not sure if theres any relation there. Like I said, its not big deal...just more curious as to why I can't click or open the icon.
View 8 Replies
View Related
Jul 29, 2009
When my battery runs low I usually don't notice it's happening until it's too late. On my last laptop under XP I was given a screen pop-up warning to plug in my power adaptor before it was too late. I've searched all over the Power Management section in Vista and cannot find this ability even though I'm sure it's there. Where is it?
View 5 Replies
View Related
Feb 13, 2008
My coputer reboots without warning sometimes, often when i surf the Internet and listen to music (på otherwise as well) When Windows restarts it tries to solve the problem and i get this window that I attached. I have visited Realtek's website and downloaded som drivers but the problem remains the same. Does anyone regognize this problem? What can I do?
View 7 Replies
View Related
Apr 28, 2008
I just built this PC, installed Vista and also MS Works 2001. I keep getting a flashing UAC warning in the task bar that WKUpdate.exe wants to access my computer. I can click allow or deny, and it keeps coming back, no option to add to trusted users. I am about ready to turn UAC off anyway.
View 6 Replies
View Related
Apr 6, 2009
I have a program from a known vendor that I would like to install on Vista Business. When attempting Installation I get the message box: "Windows Security Warning" Windoes fouind that this file is potentially harmful. To help protect your computer, Windoes has blocked access to this file.
Name: Setup.exe"
I really want to install this program. How can I defeat this Security Warning?
View 5 Replies
View Related
May 30, 2008
I have Vista Home Premium 32 bit. I have issues with the system cold rebooting while surfing any websites. I have a Dell Inspiron 1720 system. I've had several avenues of support from Dell's "experts" from India. None has solved the issue so far. If I run a Video card stress test, then go on a website and surf, the system will cold reboot in less than 10-20 seconds. The CPU does not seem to go over 60c, and the memory does not seem to run out of resources. Currently, if I surf for about 30 minutes or so, I will get a reboot. I have reinstalled Vista with SP1 and all updates.
View 5 Replies
View Related
Oct 18, 2009
I am running Vista Home Basic. I have good computer knowledge and skills although certainly not an expert. I can't understand why I am constantly getting the low C: memory warning. I store all pictures and music, etc. on a separate hard drive, and I have carefully gone over my program files and uninstalled any that didn't seem worthwhile. I have a 70 gig hard drive which seems like lots and is more than any computer I've owned before. Sometimes it seems that if I delete files, etc. to clear up memory and the next time I come back to my computer I'm out of memory again. I often get the "could not complete back up due to insufficient memory" notice. I'm unclear on what is being backed up and if this is part of the problem. I have 3 GB of RAM and the Virtual Memory is currently set at 3242 MB
View 4 Replies
View Related
May 27, 2008
When I use harmless programs (such as createinstall free), I get a warning: an unknown program wants to access your computer (litteraly translated from Dutch). How can I disable this FOR ONLY THIS PROGRAM. That means: My intention is to disable it only for createinstall, and not for any other programs.
View 4 Replies
View Related
Jan 1, 2009
I went to turn it on this morning, I just had a black screen showing the following words;
Press F2 to run
Press F11 to boot menu
Auto detecting PRI Master Atapai CDROM.
It then went to reboot and select proper boot device or insert boot media in selected boot device and press a key. I went into the BIOS to change the boot order and inserted my Vista home premium 32bit. I then got windows is loading in files. After a short while I got the black start up screen with Microsoft Corporation but after a few seconds it just froze. Moments later it went to a blue screen with white writing part of which said the following; A PROBLEM HAS BEEN DETECTED AND WINDOWS HAS BEEN SHUT DOWN TO PREVENT DAMAGE TI YOUR COMPUTER.
View 9 Replies
View Related
May 24, 2008
I am using Vista Ultimate and am on a fairly new computer, does anyone know what is causing this? I've ruled out overheating and energy problems. I set windows to not automatically restart and give me a blue screen on crashing, but it still shuts down and restarts with no warning. Is this a hardware issue? It's done this since I've gotten the computer but it seems to be getting worse now.
View 9 Replies
View Related
Mar 23, 2008
When my PC was delivered, and evaluation copy of McAfee Command Centre was pre installed. As I prefer to use my own antivrus product as well as Windows own firewall, I uninstalled McAfee. Although it didn't fully install, I removed the files left behind with the removal tool provided by McAfee. I installed my own antivirus product, aVast, and activated Windows firewall. If I look in Security Centre, the is a conflict warning saying that I have two firewalls activated. For some reason, McAfee is still shown as being present as both a firewall and antivirus protection. I don't know how this can be because McAfee is no longer on my computer. Furthermore I cannot find any way to remove the reference to McAfee.
View 8 Replies
View Related
