Access Denied In Accessing Folders / Files On External HDD
Sep 10, 2013
I have this annoying problem that just showed up recently since I've changed/upgraded laptops the past week.
I can't seem to access or rather run the files on certain folders for my portable drive. I've already changed permissions and made myself owner for the files but it seems it won't accept it and it's giving me off an error still saying that access is denied.
I've searched high and low on how to solve this but nothing seems to work.
- I tried the registry trick to "Take Ownership" and it didn't work
- Also tried various (advanced)security settings to allow/deny etc. No dice.
**Last option would be to reformat my portable drive and then just recover the emails again, will the permissions/ownership reset if I try to format the drive? Since deleting them is out of the option since I don't have "permission" for those folders/files.
View 7 Replies
ADVERTISEMENT
Mar 5, 2012
Manage Permission Inheritance in Windows 8 | VISHY Media on technologies and gadgets
Ever get this message or worse, one that does not have the access button attached? you cannot read it, you cannot look at it and you cannot delete it.
There are even worse issues where the permissions are GREYED OUT and you cannot do anything to them. (see below for a solution)
Windows 8 Consumer Preview has a robust permissions scheme that is more geared towards business users rather than err, consumers. An inherited permission means that Windows 8 set the Permissions on a volume, drive, or folder, that same set of permissions will be applied to all folders underneath it.
The solution is to ENABLE INHERITANCE to the volume drive or folder to gain access:
Another solution is to ADD a group called Everyone and give them full control:
Finally, there will be folders where everything is GREYED out in the permissions tab so it seems to be impossible to make changes. EDIT: Check below to see possible solution!
This REALLY sucks and the only solution I have found is a reg hack called "Take Ownership"
Add "Take Ownership" to Explorer Right-Click Menu in Win 7 or Vista - How-To Geek
Install the reg (right click and install) then right click on the folder or drive and select Take Ownership. That will allow you to go back into permissions and select full read/write controls by users.
View 9 Replies
View Related
Dec 29, 2013
OS: Windows 8.1 Pro x86 WMC
External Hard Drive: Seagate FreeAgent GoFlex (No external Power Required)
Problem: I can't access my External Hard Drive.
See The Screenshot Below.
Solution Applied:
Drive letter changed. (Not Worked)
Also tried Properties - Security - Advanced - Owner to Everyone. (Not Worked)
Checked the HDD in another PC Windows 8.1 x64. (Not Worked)
I connected the HDD then I installed the "Better-Explorer" through that i can access my external hdd normally but If I Reboot my PC then same Problem with the "Better-Explorer". & If I install The "Better-Explorer" Then if I connect my HDD Then from the beginning i can't access the HDD.
In Tune-Up Utilities Their is Disk Explorer through that I can explore my Ex HDD Drive. I right clicked on my drive from Tune-up & checked the disk for error and then repaired it (Windows Error checking tool) and then reboot my PC but it is still the same.
View 1 Replies
View Related
Nov 4, 2013
For some reason I cannot do anything in my Program Files for one of my hard drives. My C drive seems to be fine, as well as my 2 other drives. But in my F drive, Ive broken down the program files into a normal one and x86 one. I can basically access every other folder expect the Program Files in F drive. Program Files (x86) in the same drive works perfectly fine. Everytime i try to add a new folder or delete anything in my Program Files folder it says destination folder access denied and i need permission.
Ive tried fiddling with all the UAC and permissions but nothing seems to work.I even tried the command prompt :
"4. To Take Ownership of a Folder or Drive in a Command Prompt. NOTE: This command will take ownership of the folder or drive, and all files and subfolders in the folder or drive."
method but it says Access is Denied in my command prompt.
View 9 Replies
View Related
Sep 20, 2013
My new laptop that runs the despicable OS, Windows 8. I'm the ONLY user, the owner AND Administrator of my laptop, but I'm denied access to my own files!! I'm only a casual user, meaning I use my PC for "fun stuff"...i.e. writing & reading emails; playing games & searching the internet for things that interest me. I don't have anything on my PC that has to be "guarded" from others, as NO ONE ELSE uses my PC. That said, I should be able to access EVERYTHING on my PC, but the paranoid screwballs at Micro$oft have set up the most confounding OS, & I'm repeatedly denied accessing things like: Program Files, Pictures (even though I'm the one who put them there!!), Properties, etc. etc.
I know I'm not the only one who's been confronted with these problems, as I've read the same things repeated on sites in the many places I've visited in my attempt to figure out how to break the chains that Micro$oft has put on MY PC. How to change the settings so I can access my own stuff? I don't understand why MY computer is given the authority to DENY ME access to stuff I entered myself. When I couldn't view my OWN Pictures, (that I put here!!!), How I can use my own PC the way I want to...like the "good old days" of XP & even Vista HP?
View 3 Replies
View Related
Sep 5, 2013
I'm running Windows 8, (unfortunately), & I can't access certain files even though I'm the only one who uses this laptop & I'm also the Administrator. I tried numerous times to allow file sharing & change what I thought I should, but I kept getting red-lettered statements saying that I'm not allowed to make such changes.what steps to take so I can get to the files I need. There's no reason why I should be denied access to do anything when it's my own computer!
View 9 Replies
View Related
Mar 19, 2014
Alright, so I just recently got a new computer that has Windows 8.1, compared to my old one having Windows 7. I tried to transfer all of the files/folders over to the new one over the network and everything worked just fine. However, whenever I tried to modify any of the files that were transferred from the old one such as a png or txt file and overwrite the original through the program, I was always given an error box that said "access denied."
I'm pretty sure this is meaning that I need to get administrator privileges from the old PC, but I'm not sure how I would do that. My only option is to save the version to another folder then move it to where the original one was.
View 1 Replies
View Related
Aug 1, 2014
Cant access to see hidden files and folders. I would suspect a virus, but iam not sure that's even possible. I got Malwarebytes, Super Anti Spyware and Malwarebytes Anti Root Kit, all show 100% clean. I need to see these files?
View 9 Replies
View Related
Jan 3, 2014
I work on malware and viruses and I use a junker XP machine to do it. I have been doing it for many years, however, I have my first Windows 8 hard drive to scan and my XP machine beeps at me but the new drive never shows up for me to scan with my malware scan tools. Does this have something to do with Windows 8?
View 3 Replies
View Related
Oct 27, 2013
I just got a new laptop that had a second Hard drive bay, so to speed up copying all my information from my old laptop (which had Windows 7) I just took the HD out of the old and put it in the new.
Everything seems to work fine unless I try to access the files stored in the /users directory (which is where almost all of my work files were). When I double click the file for my username on my old computer, it tells me I do not have permission to view this folder.
Under that is a button that says Click here to permanently gain access to this folder (with an admin icon).
So... I click there. Then as it begins to open the folder, the green bar flies up and stops at about 95% and just sits there.
I had about 40GB of data in subfolders to this, is that how long it takes to change all their permissions? Or do I have to put the HD back in the old laptop and copy it another way?
View 3 Replies
View Related
May 19, 2013
So I use a program called crashplan to back up all my data, but the program began crashing whenever I open it. I would open it, the program would bgin running for a few seconds to a minute then just go away, close with no message.
SO I emailed crashplan and they told me to do this:
It appears that the CrashPlan backup engine is running out of memory. Please follow the instructions below to allocate more memory to the CrashPlan backup engine. Running Notepad or any other text-editor as an Admin, edit the CrashPlan engine's CrashPlanService.ini file to allow it to use more java memory:
1- Stop the backup engine: [URL] .....
2- Locate the Notepad program, right-click and Launch as Administrator
3- Go to File > Open, and navigate to C:Program FilesCrashPlanCrashPlanService.ini (note that you will have to change the option from .txt files to all files in the file selection screen in order to see the CrashPlanService.ini)
4- Find the following line in the file: -Xmx512m
5- Edit to something larger such as 768, 896, or 1024. E.g.: -Xmx1024m
This sets the maximum amount of memory that CrashPlan can use. CrashPlan will not use that much until it needs it. I would recommend starting out setting it to 768, and go higher only if you continue experiencing problems. You can set it as high as 2048 on 32-bit systems, or even higher on 64-bit systems. 6- Start the backup engine.
So I tried it but I couldn't save it, I got an error message that said "Access is Denied".
View 3 Replies
View Related
Oct 9, 2012
I am getting access denied when attempting to get into a folder. Just recently installed Windows8. I had the same issue with win7, but I managed to resolve it. What do I need to do to get around this? I don't remember ever having had a problem with simply getting into one of my own folders.
View 3 Replies
View Related
Jan 22, 2013
I have two laptops, Lenova with Windows 8 and HP Pavilion with Windows 8 pro. I have a HP Officejet 7560 hooked up to the Lenova.
When I try to access the printer from the HP, it can see the printer, but in trying to connect, Windows is telling me access denied.
If I hookup the printer to the HP, the Lenova can see it, connect to it and print to it just fine.
I have checked all the sharing and permissions settings on my Lenova, and everything should be set to allow another computer to access the printer, but it is still giving me the same message.
The Printer drivers are all up-to-date. I ran DriverScanner 2013
View 2 Replies
View Related
Jul 24, 2014
after uninstalling avast few days ago i was prompted to restart the system. Since then when i booted up a random folder named [e1136dde5b111b6e950b(windows defender files)] came up in program files. I cannot delete it since it's needless , nor' rename it , take ownership or anything. I've provided few screenshots showing it.
View 8 Replies
View Related
Aug 25, 2013
I originally had a RAID 1 and windows 8 pro 64 bit installed. I had a boot error and could no longer boot into windows. I purchased two new HDDs and created a RAID 1. Loaded Windows 8 Pro with no problem. Then I added the original two HDD so as to retrieve data. I went into the RAID BIOS and took the old HDD off RAID configuration. I then disconnected one of the original RAID HDD and now have only one of the old HDD connected to the motherboard.
In Disk Management, the disk I am trying to access is listed as DISK 1 and divided into System Reserved (D, 350 MB NTFS, Healthy (Active , Primary Partition) and (E 931.17 GB NTFS, Healthy (Primary Partition). But when I try to access the E: drive, I receive the following "E: is not accessible. Access is denied."
Any way to getting access to E: I would like to retrieve data.
View 2 Replies
View Related
Mar 14, 2014
I recently upgraded my W7 Home premium to a genuine copy of 8 Pro that I got through school and now every time it boots, note pad opens up and has a smaller window saying "Access denied." I don't see anything funny looking in the start up section of task manager and everything in 7 seemed to be good and virus free before the upgrade.
View 5 Replies
View Related
Nov 29, 2012
I upgraded my system from windows 7 to windows 8 and now my external WDD 1TB drive is displayed in my computer, but when selecting it I get an 'Access Denied'
View 2 Replies
View Related
Nov 19, 2012
Trying to delete a folder I get "Folder Access Denied" -- need to provide administrator permission to delete this folder. I am the only account on this PC an am Administrator. I click continue and get the same message with "Try Again".
View 3 Replies
View Related
Dec 6, 2013
I am currently using Windows 8 Professional (x64) as an administrator. My issue is that often certain programs or software do not exit properly and show up on Task manager as background processes. The issue is that I cannot end these processes because "Access is Denied" and must therefore restart my computer in order to run these programs. A simple example is Skype. When I quit Skype, it will show up as a background process on Task manager and I cannot end the process. If I try to sign into my Skype account again, it says that I am already logged in from this computer. Battlefield 4 is another example. I've never had this issue with Skype or BF4 previously, nor do I remember installing something significant that may have made changes to my PC.
View 3 Replies
View Related
Oct 17, 2013
Im using Windows 8 for very first time & I installed & activated windows 8.1 pro. & created Administrator local account but still windows 8.1 gives me access denied for most of the task (even for editing text file i have to run notepad as admin by right click option & open the file from notepad) how can i get rid of that annoying "access denied" popup in main Login ID. Some time internet connection get 651 error.
OS - Windows 8.1 Pro x64
note - I turned off UAC by pulling slider all the way down at the very first boot.
View 1 Replies
View Related
Dec 20, 2012
I am dual booting Windows 8 and Win7, using one 500gb hard drive. Win7 has been my main OS, so all of my music, photos, etc. are stored there.
How can I access the user data from my Win7 install , from my Windows 8 install?
Everytime I try to go to it from Windows 8 ---- > My computer it says that I don't have permission to access the files for that user,then attempts to do so for some random period of time, and in the end nothing happens.
View 3 Replies
View Related
Sep 15, 2014
Following a recent Windows Update, Windows Firewall on my Windows 8 system was disabled. Upon attempting to start the firewall through the services.msc dialog, I receive an error code 1068, informing that the dependency service or group failed to start. After doing some googling to attempt to resolve the issue I found the dependency service, the Base Filtering Engine (BFE) was not active. When attempting to start the BFE service, I am stopped with an error 5, indicating that access is denied.
I am unable to figure out why access to the BFE service should be denied, since this account is the only account on the computer and has administrator privileges. Because of these issues with the firewall, I am unable to access the internet and am creating this thread through a separate laptop computer.
In a potentially related issue, Windows is not "activated", though I had activated it approximately a year earlier. Because of this, I am unable to access my Microsoft Office programs. I believe that I am unable to activate windows due to a lack of internet connectivity caused by the above firewall issue.
My next step is to take the computer into a nearby service depot and pay the requisite charges.
View 1 Replies
View Related
May 4, 2013
When you right click on a photo and go to Properties -> Details , there is a link at the bottom called Remove Properties and Personal Information that will remove the camera EXIF data, GPS location and other metadata.
I took a photo on my iPad and emailed that picture to my Windows 8 laptop. The photo contains personal information including my GPS location that I want to remove. When I try to remove it I get an error message saying File Access Denied....You need permission to perform this action. I'm the only user on this laptop...I'm the Administrator. I have Full Control over this file in permissions. I even added the Take Ownership thing to the right click menu and tried that, but it still wouldn't allow me to remove the personal information from the photo.
It works on photos taken with my other digital cameras, just not with photos taken with my iPad.
View 7 Replies
View Related
Sep 22, 2013
I have 3 disks in my computer, of which 2 are SSDs.
I swapped the SATA ports between one SSD and the HDD so as to give the SSD a SATA port with maximum 6gb/s transfer speed, and now the access to the HDD is denied. The drive letters are correct, as they should be.
The user (myself, admin) did not change.
What can be done about it? I already tried to check the ownership of the drive and says STEVECOMPUTER/Administrators, which looks good, as my user account is an admin. Still, I have no access.
View 3 Replies
View Related
Jan 22, 2013
I have installed Windows 8 on a fresh SSD drive and also connected my exsisting extra harddrive which I have previously used together with Windows 7. When I try to access that harddrive I get a "access denied" message even though I'm a administrator, what do I need to do to get access to my hard drive?
View 9 Replies
View Related
Jul 2, 2013
My Windows Search is not working.
I try to start it from services management but the error 5 (access denied) rises (with user SYSTEM)
I tried create another user with admin privilegies, but it is not working as well, error 1297 rises
I think I added some folder to indexing and COULD this folder is not with SYSTEM privilegies...BUT I cannot see the folder indexed because the service IS NOT WORKING.
View 4 Replies
View Related
Sep 9, 2013
We just purchased a new office computer and it came equipped with windows 8. Everything seemed to set up wonderfully as I connected back up to the server we have here in the office that is running Windows 2008 Server. I set up my printers, I mapped the network drives I needed.
The problem I am having is that the mapped drives seemed to be "read-only." I can view and open all files, but I cannot save or create new folders on the drive. I have not changed anything on the server, as far as user settings or permissions because everything was working smooth on the former computer that ran WinXP.
I have checked the "manage your credentials" to ensure I have the proper Windows Credentials loaded. Below you will see a screen shot of what I keep running into.
View 5 Replies
View Related
Jul 24, 2014
When I open it and log in it doesn't I'm online. I can't even send IM mesages, I only see gray circle on the right side spining. Sometimes when I restart it It all works. But most of the time it doesn't I tried changing port number, reinstaling skype etc. Also skype.exe can't be killed in TM. I get info that Acess is denied.
I use windows 8 and latest version of skype.
View 4 Replies
View Related
Jun 18, 2013
I've recently made the move to 8 on my laptop and actually really like it. Now I've got an ubuntu 13.04 server with some samba shares set up that are completely visible on my Windows 8 laptop but when I try to access them I get Access Denied and it asks for my credentials again. I'm 1000% sure the details are correct, and I'm also sure it's a client side issue. I say this because there are 2 other PC's in my household, a win7 laptop and win7 desktop, both of which can access the shares when supplying the same credentials I do for my Windows 8 laptop.
View 1 Replies
View Related
Feb 7, 2014
I have removed my only admin account from the administors group and now i could not do anything in my pc..
It is just a local user account now and I also have no other account assigned as admin and my built in admin account is disabled.
View 3 Replies
View Related
May 17, 2014
In continuation to my previous thread on this subject, I now have another network printer problem in the same system. I chose to open it in a separate thread because the previous one became too long.I have 3 PCs on my home network
1. Windows XP (SP3) desktop with HP6500 E709a USB printer.
2. Windows 7 (Ultimate SP1 64 bit) desktop with HP 1018 USB printer.
3. Windows 8 (64 bit) laptop.
All computers can see each other and share folders on the home network.
Computers 1 & 2 can freely print on their own printers, as well as on each other's printer. Computer 3 (Windows 8) can print on the HP6500 (which is connected to the XP computer), but cannot print on the 1018 printer connected to the Win7 computer.
I know that on the Windows 8 laptop I have to define a local port for the network printer, but when I try to do it I get "Access denied" error message. Win7 denies access from Windows 8. This is strange, because Win7 does allow access to XP. On the WIN7 computer, under printer properties/security, print permission is granted to "Everyone".
So what could be the reason for the "Access denied" error? I guess it has to do with security / users / permissions, but I cannot find a solution.
View 2 Replies
View Related
