Usually if I'm having trouble with Windows XP, I can boot into Safe Mode and run some tests and usually a rollback of the system settings work.But I can't even enter into safe mode. My computer completely restarts after flashing a BSOD for 5 milliseconds and then restarts. It would be awfully nice if I knew what that message said.It started out of nowhere, not after installing any software, just in the middle of a two player game of Mortal Kombat 3.Things I know: Windows will not boot up at all, under any circumstances(Tried with/without any media in, or hardware on the computer, tried all options in the failed bootup screen);Linux boots fine (It's on another harddrive... harddrive failure
When I turn on my computer, it starts up like it's supposed to. Then, when it comes to the Windows XP loading page (you know, the one with the bar scrolling underneath it), it suddenly goes to a Blue Screen of Death for a straight millisecond, then reboots again. Then my computer gives me 5 options. I could load Windows at the previous settings that worked, load Windows normally, and there were three other options that involved loading Windows in safe mode. I've tried all five. All five result in the computer rebooting itself again. There was a timer below for 20 seconds for me to choose an option, so I doubt that it's a worm causing this problem.My antivirus is up-to-date and I do regular scans. I have a firewall. It couldn't have been a power surge, because I have a power strip on the computer, and it says that it's protected. And, before all of this was happening (a few minutes before), my computer was acting normally. There wasn't anything funky going on, so I doubt that my hard drive was dead.
I use my administrator account all the time although I know it isn't the most secure thing to do with an NT based OS. My questions amongst many is that some of the related help files said add my current administrator account to the "power users" group. That way it will be a member of both group how would that work exactly and would it make a difference in terms of security?
I am running Windows XP. For the past 2 days, whenever I launch Internet Explorer (version 6) or the Control Panel, the Windows Installer launches first with a "preparing to install" message. This message will display for 2 minutes or so and then the Internet Explorer or Control panel window will be displayed. This is extremely annoying. Occasionally, when I attempt to print from Internet Explorer, the Windows Installer will also launch first and behave the same way. I have spent a day searching for a solution and the only thing I have found so far is a reference to a Windows Installer Cleanup utility
My friend has a dell computer with the latest version of windows xp.his system moves very,very,very slow.thats why I'm trying to get help for him on my computer.i do not know much about xp.we have ran registry cleaner and virus scan and i am not getting any error messages.it is a 2 gig system.
so i recently got sum serious ad pop ups on my comp, think it was about 10 a min at sum points! anyways wen i pulled the internet plug out my comp, i started to get 'cant work offline, connect, tryagain' These were popin were poppin up in extreme amounts aswell. I was doin sum work at the time on the comp, so i figured a quick and easy (TEMPORARY*) solution for the promblem would be to try and find the process and delete it. I deleted one process to many, by deleting a system process. I didnt think much of it at the time, but when i restarted my computer all that would load is the desktop backround and the mouse (no start menu, or desktop shortcuts). I can bring up the windows task manager, but it aint much good to me as aint got a clue how to fix my probelm
I know what to do but i am bit curious on the formatting bit. I have 2 hard drives, Harddrive "A" has all the window/program files as well as other programs like games and documents. Harddrive B is where i keep all my big files like videos and movies of course i want to format harddrive A but the thing is that harddrive is split in to 3 drives (C:, G:, F. I dont mind formating the c drive since it is all windows/program files but i dont really want to get rid of the G/F drive. I kno you can format the harddrive through the installation process of windows but i was wondering if it is possilbe to just to format the C: during that process or does it only format the whole harddrive
I reformatted my hard drive due to OS issues, I was running a trial version of Server 2003 along with XP Pro, and I had to get rid of Server 2003 because it was conflicting with XP Pro, and so the only way to do that was by reformatting both hard drives including XP Pro because Server 2003 was acting as the dominant OS, so I backed up all my ****, and reinstalled XP Pro, but now I get this hard drive problem that it says only 51 Gigs are remaining on a 250GB Hard drive, when the only thing installed on that hard drive is XP pro and maybe 15 applications, I tried using every program I can think of to find hidden files that equal a huge size but nothing shows up
My computer operated windows XP sp2, and have 3 hard drives conntected 1. HD 0 is 160 GB divided into 2 partiotions, one 20 GB containing the system the other 140 Gb containes data directories and film directories2. HD 1 is 120 Gb connected through mobile rack and also contains data directories and film directories3. HD 2 is 200 Gb connected through mobile rack and contains only film directories.Untill thursday night everything was perfect, but when i I opened my computer friday morning i found the following1. HD 0 second partition all film directories completly disappeared and the free space is 40 Gb instead of the original 50 Gb
I got a trojan that attached to my browser. I managed to get rid of it by system restore.A few days later I noticed I only had 127 GB of my 300GB harddrive showing.I did manage to find the missing space though Disk Management. It was showing 170GB as unallocated space. I named it E: and formatted it.It now shows in My Computer as New Volume E: When I open E:I get 2 folders, Recycler and System volume Information. SVI will not open. It gives me an error, ESystem Volume Information is not accessable, access is denied.I am trying to find a way to either resize E: to 1GB or smaller and move that 169 GB back to C: or get rid of E: altogether and put all the missing space back on C:
about two yrs ago my dad made a massive mistake of making two partitions on my laptop, and giving the C: only 2gigs of the partition, and the D: 28-29gigs. I wanted to format my computer completely anyways, and would like to know how i can format my computer and merge these two partitions. I have the formatting disks, but it never goes to a screen asking me about my partitions, it just formats everything on my C: (my default drive), but keeps everything on my D: intact (games, files, etc.).
Recently upgraded my laptop to windows XP from ME. I first replaced my 5 gig hard drive with a 20 gig hard drive. I added another 128 memory module for a total of 256. For an old machine it really hums now. Three minor problems are bugging me though. 1. I lost the sounds from my modem. The modem works fine except for no sound. I assume that the sound is from the unimodem half-duplex audio device that is located on the Lucent winmodem. I have checked everything. The system says that it is working correctly. I cannot even find the driver for this on microsoft . I thought if I could load a new driver it might work. No such thing. 2. System restore didn't work until I erased all the memory points and reloaded the program. Now if I open siystem restore and click on "settings" or "help" System restore shuts down. I assume it is corrupted and would like to reload it.
After I used Fix-it Utlilies the program erased essential system folders. So now when I do check disk it reboots, flashes a blue screen real fast (so fast I can't even read it) then restarts the computer, restarts check disk, restarts the computer, and on & on. It won't stop doing this till I interrupt check disk at the start by hitting any key but then I end up with a black screen with instructions which include safe mode, safe mode with networking, start windows normally & last known configuration
I can't boot from an installation CD to do a "repair" since Windows was preinstalled in the drive so I have NO CD. Does system recovery work?, who knows, I'm a noob and have no idea how to use it. The only thing I've tried to fix it was 2 things : 1) use system restore which failed; 2) use run> sfc /scannow but this file checker is also broken and will barely start before it errors and stops. I don't know what else to do besides reformat
When I turn the computer on as soon as the welcome screen comes up to sign in, a window pops up saying "The system is shutting down. Please save all work in progress and log off. Any unsaved changes will be lost. This shutdown was initiated by NT AUTHORITYSYSTEM. Time before shutdown: [counts down from 1 min] Message: the system process 'C:WINDOWSsystem32services.exe' terminated unexpectedly with status code -1073741482. The system will now shut down and restart." I have tried system restore which is unsuccessful, I have done "last known good configuration" which also doesn't work. I'm in grad school and need my computer
the computer boots up and goes to the windows 2000 screen but then the next screen would be the desktop but instead it reboots and goes to the same spot the 2000 screen but never makes it to the desktop, this happens over and over. I tried to go into safe mode but does the same thing tried command prompt only so I could type in SCANREG but it just reboots again I can't get anywhere to do anything.
The last thing I tried was last known good configuration. I clicked on it and a page comes up with all the writing I hardly got a chance to read it when it reboot again. but under the first paragraph wher it says something about last know good configuration it has a space and the it says project 1 like I could have click on that if I would have been fast enough.
I have Microsoft XP. This morning, my PC won't take me to the account members screen. After it goes to the XP logo, it restarts itself, then goes to the XP logo, then it starts again. What is happening to my PC? And can I correct this problem without losing any of my saved data?
i had done this many times before but have never stopped at an error like this from reformatting and installing a fresh xp on to a harddrive. I was trying to reformatt a brand new xp onto the harddrive cause for some reason the old one won't load up to desktop and it says system32/config is missing or something and needs reapir but i had try to repair several times and it freezes. So when i put the xp disc in it ask me to press f8 to agree and stuff to install windows XP just after that, it says at the bottom searching for pervious version of microsoft windows, i had restarted many times and tryed again but nothing ever happens it just says it. I even tryed leaving it to load for 14 hours and nothing happened..... im guessing something from the pervious version of windows was corrupted so it wouldnt install a fresh copy. But i really need u guys help on this. Can someone tell me how to fix this problem all i want is a fresh copy of xp on the harddrive and all the windows gone.
I was just wondering, is it possible to install 2 versions of XP Pro on one hard drive? This is because i have 2 versions of XP Pro, one in English and one in another language, so i was wondering if it would work. Also if it is possible, do i make separate partitions for each OS? If someone knows any good sites which is about this topic or has good tutorials of what i'm trying to do.
I just bought this computer about 4 months ago and over the last few days it has been randomly restarting on its own. I ran adaware and scanned for viruses with norton and they found nothing. Yesterday it restarted a couple of times, one time I had firefox and paint shop pro open, the other time, I had outlook express open. I'm not sure what could be causing this, the only thing I've installed within the last two days was the latest expansion pack for sims 2.
My wife fired up her PC this morning and it would not complete the boot process. Shows Windows XP page, then COMPAQ page, then black screen, then back to Windows XP page. Just keeps going in circles. I have switched it off and tried again but usually with same results. A couple of times I have gotten page saying there was a problem and asking if I wanted to start in safe mode. I've tried this. Seems to rapidly scroll through a bunch of lines of info, then quickly go back to the reboot cycle. I can go into setup or recovery from the COMPAQ page. I want to avoid having to reload all my wife's applications though. I don't have the original XP disk. I have current antivirus/spyware (AVG paid version, installed about a week ago). We've made no other recent hardware/software changes, although my daughter was on the net last night!
i aint doing it ! the computer keeps restarting on its own it all happened yesterday first time it just restarted i dont remaber doing anything suspicious.i checked my inside of computer and everything is intact, i checked for spywares and still no hope done a chkdisk etc.
A couple of weeks ago my computer started to act very strangely and after sending numerous windows errors it began to restart on its own for about 5 mins then restart again.It continued in this loop and actually the loop became smaller to the point where I couldn't even get onto the log on screen and it just kept saying press 'ctrl, alt, delete'.When I did it just restarted to the same point (small loop).I asked a few IT bods and they said that it couldn't read from the hard drive and managed to get a XP boot disk and it then started to run but not to my log on page. The page had a 'run' button instead of start.I copied over all of the files from the disk to the hard drive and ran it from there.Then hey presto I was back on to my log on page and home page.Then exactly the same thing happened.The error pop ups began and it began to shut down and restart.
My computer keeps restarting. I tried everything I could find on google with no prevail Within minutes of turning on my computer it restarts. I followed one suggestion un checked an option "restart computer when computer crashes" and now it just freezes within minutes of startup. It doesn't, however, freeze in safe mode if that makes a difference.I've tried pretty much every virus/spyware program in the book so I don't think thats the problem.
I bought a new HDD for my Laptop and I need to image copy my old HDD to the new one. I want to do image copy so I don't have to install everything again.
My Laptop doesn't have a floppy drive, but it does have USB2.
Set a sub woofer with no magnetic shielding right next to my computer tower for about 10 hours or so. I mean you can see the sub woofer effect the monitor when your holding it from about 8 inches away, so should I be worried about my hard drive? The computer appears to be functioning normally, but still, it would almost seem crazy for it not to be damaged. I don't know what difference it makes but here are the specs
Windows 2000 pro Small master harddrive was full installed an old harddrive from another computer an 80gig axs a slave. it shows it is drive letter F and can open it I deleted all the files that were on it so it is empty. Itshows in computer managment but how do I get it so I can put folders, files and like put the antivirus on that drive, I think I did something wrong but don't no what it is. It shows in computer management as Drive F and I put it as NTSF like the master drive
I have been running Windows 7 RC beta on a new 1tb harddrive and installed XP Pro on a partition in the D:drive. When I rebooted all that I could get to reboot was the new install of XP Pro. Is there a way to select which system I can reboot from or toggle between them? Hope you can help? Thank you. I am running a Pentium 4, 2 gb ram, 1 tb harddrive.
I am running windows xp pro with all updates on a intel III 1000 processer with 2 250gb hds. my ISP runs an antivirus and I run Norton antivirus and Spy Sweeper. Late yesterday windows did an automatic update and I installed them. This morning I cannot boot on the hd with the updates. I reach the window that displays system info in b/w. At the bottom of this screen are two sets of two symbols a Y followed by an infinity symbol. On this hd I do not reach the point of going to safe mode. I booted on the second drive but it is not up to date (luckily?). I cannot determine how to remove the updates from the first drive. I tried System Recovery, I get a message that it is corrupt and do I want to send a message to Microsoft.
