I accidently updated to "USB" keyboard & mouse drivers, & now I can't do a thing after XP boots.I've tried Safe-Mode (knew that wouldn't work) Is it possible to restore the registry thru DOS? Maybe System Restore thru DOS?
View 1 RepliesI was messing around with CCleaner and deleted something to do with an old version of McAfee (which isn't even on my computer anymore) from the registry. Yes, it was stupid to mess with the registry I guess because I failed to make the backup and now my computer won't boot. I get the blue screen that says there was an error 0x0000008e, or something like that.
I have tried using F8 and choosing the last known good configuration but it doesn't work. Also, I can boot into safe mode and I tried running a system restore but after it finished and I rebooted, it said that I couldn't restore from that point.I haven't really tried another restore because I am a little afraid to do anything. I don't want to risk losing access in safe mode because I need to be able to back up some of my files if in case I have to do a reformat.
I recently removed a entry from my registry and since then I have not been able to get past my desktop wallpaper. The wallpaper will load but there are no icons and no taskbar.How can I restore my registry from the command prompt in the Recovery Console? I made it to the command prompt, I jus't don't know what command lines I need to enter. IF there is any other way to restore the registry, of course I'll try that too.
View 8 Replies View RelatedI am not sure if my computer has this capability. If there a good program to download and run. Currently, I use Acronis trueimage to backup the entire drive (my software drive as I have them partitioned).
View 2 Replies View RelatedThe situation is this, my computer got a trojan that place itself in the registy, so I followed teh instructions to delete those entries or teh registry itself, but I was to tired at the moment and yes I delete registries by accident. Well my questin is, If there's a way to restore those registries that I delete? I was not doing back up of reg, because teh registries were with the Trojan URL Leave blank. so I was deleteing the URL but in the instructions was saying I need to get rid of some registries, so I delete this three , by my big mistake, if theres a way to get those registry back ? can i grab another reg. from teh computer of my roomate, save it in a disk or jumpdrive anf then place them in my reg, and edit teh adress? So far my computer is not acting bad, but those registries I delte, are they going to cause me more grief later?
View 14 Replies View RelatedCCleaner was featured last April 18, 2006 on CNET's Download Dispatch Windows edition with a subject ''Mr. Sparkle'', and because of it I had downloaded the software and had my PC Cleaned. I had also read CNET's how to use CCleaner and even had followed it while I was cleaning my PC.
One problem though I had observed on that how to is that though it advise you to have the registry backed up so that just in case something goes wrong, you would be able to restore the registry back, it lacks the procedure on how to restore it. After cleaning my PC, noting happens though and I am glad my PC is still running fine with a cleaner environment. But let say if I find something wrong later, how will I able to restore the registry from the backup? Anybody here who knows how? It seems also that I did not find this option inside CCleaner.
I know that just exporting and importing the Registry does not put the Registry back to as it was before any new entries were made.
I've been told that doing a System Restore does not wipe out all new entries either.
I was told that the only way to put a Registry back as it was before new entries,is to do a System State backup using the Microsoft Backup utility.
Is the correct, and if not what method puts a Registry back, wiping out any and all new entries, the way it was
Bit of a long story but here are the highlightsAdded spare memory stick and PC booted up OK Closed down PC, fixed cover on, tried to reboot but failed, got message from Windows saying system files corrupt Found process on Microsoft KB http://support.microsoft.com/kb/307545/en-us and carried this out. Only difference being that I was able to use XP from a second drive to do some of the copying which saved me from going in to Recovery Console all the time Last step in the process is to do a system restore but I get a message that this was not able to complete Tried several restore points
View 3 Replies View RelatedMy computer encountered:STOP: c0000218 {Registry File Failure}
I've tried using the Windows XP CD to use the recovery tool, but it just reboots whenever I try
I installed XP-Home edition on a computer and did a file search for any file for Scan Registery and ScanDisk, but did not find any such file For Win 98/SE, the O/S at the start of computer, backs up the Registery - by defalut 5 back-ups, 1 for each day, but can be increased up to 99. If the Registery get's corrupted (or you want to remove all traces of a just installed and uninstalled program, you can shut down the unit, re-boot with F8 to Command Prompt and run: ScanReg (DOS Mode) and restore the 4 files: System.dat, User.dat, System.ini and User.ini Is there a similar functionality available in XP - Home Edition? Is there such file Win XP version?
View 2 Replies View RelatedI think i did something really wrong... i had a registry backup on my desktop and i wanted to move it to another area on my computer. I clicked on it and it said : are you sure you want to add the information in C: blah blah registry backup.reg to the registry? I dont know what i was thinking but i clicked on yes. And now i have several problems.... too many to mention but here's a few: anything windows site or microsoft site related cant get in.
View 13 Replies View RelatedThe registry on one of my computers is corrupt and if I try to copy the files from the WindowsRepair folder using the windows system repair tool, I'm told the files cannot be found. One possible solution I thought of is using the registry files from my other computer running Windows XP. I don't even know if this is possible, but if it is, how can I transfer the files. I would put them on a CD but the CD drive won't open when the system repair tool is running, and they're too big to fit on a floppy disk, even one at a time (the system and software files are both over 2mb.)
View 4 Replies View RelatedI want to backup my Autocomplete User Names and Passwords, Web Addresses, and Forms entries in the registry. What are the registry addresses for these items?
I tried to delete the registry entries which were bad, I had 30 of them, but the these two will just not go away, even by doing them manually, such as saving as a backup then deleting it manually and remerging. They just show up no matter what I do, or so use programs like Registry Mechanic, which I found only mediocre, very far from the ratings. to delete these two entries somehow from someone who is actully knows how to without using several so called registry cleaners, which only work partially.
View 7 Replies View RelatedI have entries in my Windows XP Professional Registry that are no longer needed. When I try to delete these entries the registry editor will not allow me to delete the entries. Is there a way that I can delete/remove these registry entries?
View 12 Replies View RelatedEverytime I try to export HKLM and HKU as Registry Hive Files using regedit, I get the following error message: Registry Editor Cannot export D:HivesLocal Machine: Error writing the file. There may be a disk or file system error. I am trying to export the above mentioned hive to my second hdd. Can anyone tell me what I am doing wrong
View 3 Replies View RelatedI foolishly deleted something in my registry. Now I cannot access the internet from a program that wants to communicate with it to register the product or collect information via the internet, such as Print Master.
View 10 Replies View RelatedWhen I did a clean install of XP, I saved the backed up the registry.
Can I import this backup to clean out all registry entries since the
install?
Or can I do a comparison between the backup and the current registry to look
at differences and delete them manually?
On my box at home, I have Norton System Works, which contains a registry diagnostic/sweeper.At work, where I run Windows 2000 Pro, I was wondering...I know there are various registry diagnostic & cleaner utilities out there on the web, but I thought I had heard that Windows itself either includes one on the OS disc or makes one available for download.Is there such a thing as an official Windows Registry utility?
View 8 Replies View RelatedI recently downloaded some drivers as I was trying to install a new printer who's software would'nt load. This did'nt solve the problem. I decided to get a printer that I had had before, Brother DCP-110C as I knew this had worked well. I tried to install yesterday (28th July) but could'nt and my PC keeps switching itself off near the end of the installation. I then thought I would use System restore to go back to a happier time when I had the first Brother printer. previous saved point wont let me to restore
View 4 Replies View RelatedMy computer had a turn yesterday and kept giving me the blue screen error on start-up, so using my windows disk I managed to run chkdsk. So I can get on now, but certain things won't run, like Media Centre, Firefox has forgotten my settings and also my iriver doesn't get acknowledged when I plug it into a USB port.So I am trying to run System restore to go back a couple of days.I can get into restore, and go through everything up to the point where you click 'next' in order to restore it.I click on next but nothing happens, it just stays there.
View 3 Replies View RelatedI am unable to acess any of my or XP's restore points. When I went to restore to an earlier date. All appeared to be going as it should. However, when I got to my profile a message window came up that said unable to restore to (chosen date/time) etc. I chose 3 other restore points over the last month, thinking it might be some recent problem, still a no go. Any help would be greatly appreciated? Is there a utility to use to check and see if there is something corrupted?
View 7 Replies View RelatedI'm trying to do a system restore without success. It goes through the motions but after it restarts always say "cannot use restore point, no changes have been made to your system". I'm trying to correct a font setting change that happened without my knowledge.
View 13 Replies View Relatedi want to restore my laptop. had restore turned on until about 3 weeks ago shut it off. question:if you shut off restore does it still keep the last restore points? and is there a way to restore in safe mode (cant boot in reg mode) if restore is shut of. when i try and turn on sys restore in safe mode it say "i cant"
View 1 Replies View RelatedRestore Incomplete is the message regardless of what date is entered. I have 8.5 gig disk space and turning off RESTORE , rebooting and creating a new restore point did not solve the problem--the message remained the same. Other than reinstalling XP I am at a loss as to what to do. I do not have a need to restore at the moment but I may need to in the future.
View 8 Replies View RelatedMy comp has been experiencing several problems and is running poorly. I bought an external HD, completely backed up everything important and was about to run a system restore as I had created a manual restore point following the resolution of previous problems. The link to the thread is found below. However, when I use the system restore wizard, I can only select November 8th, 9th, and 10th and today is the 10th. I created the manual restore point back in March 2006. I cannot change the month and I have no idea where to find manual points.
View 6 Replies View RelatedMy system restore is enabled but no matter what bold restoration point I choose I am told system can't be restored to that date, choose another restoration point. I do, the system shuts down and restarts and I get the same message.
View 7 Replies View RelatedHow do I do a restore to factory settings? The only thing I have been able to find is a system restore to an earlier date, could someone help me please?
View 6 Replies View RelatedI'm running Windows Xp porfessional. I was wondering if its possible to have system restore create a restore piont once a day automaticlly?
View 6 Replies View RelatedI have Windows XP. I create restore points, but when i try to use the system restore, it says; Restore failed, could not resstore computer. I choose a different date and get the same thing, Can't restore. Does anyone know why this happens?
View 12 Replies View RelatedMy norton anti-virus said that some files were mssing. It said that if I restored my computer to an earlier date that this should correct the problem. My computer has restore dates so I picked one from the previous day. When my computer re-boted it said that it was not able to restore to an earlier date because some files maybe corrupted. Said to restate the computer and trying restoring again. I did but had same results. Any restore date I pick, it says it is unable to restore.
View 8 Replies View Related