A new hard drive for my computer and I am installing win2000 on it. When it come time to partition I cut my drive in half. Then windows proceded to format the first half and install the operating systme on it. It never asked me if I wanted to format the other half so I thought I could do that after. When I got to windows I did not see the other half of my drive. I would boot from my CD again and I could do it that way. Well I wasn't able to do it. How I can see my other drive and format it.
How do I make the second partition, which includes all files from another hard drive, pretend that it is the main partition? I want to simulate the second partition being my main one for a while.
I have my Windows format disc and I want to create another partition with it. I tried to create one, but it said something like "You have no more space to create another partition because you used up all your space on your Windows primary partition". See, when I reformatted my computer a while back I just created 1 partition for Windows and applied all the space onto that partition.
If there is a way I could remove some space off of my Windows primary partition and create another partition with the space I removed. I want to do this so I can put general things in my other partition such as documents, music, etc. and just leave the other partition for Windows and programs.
What are the steps needed to access one of my partitions, delete it, then use 1/2 the space and apply to system drive and the other 1/2 to another partition?
I bought a new computer.It appears to have been partitioned into a NTFS format and FAT32 format.The default drive for my documents & my pictures etc is the NTFS which I have been using happily. It is Media Centre Edition so I also have a few large files (>4GB) - though I dont keep them long term.NTFS partition has fulled up - but I cant move my large files to other partition to free up space
I've done a little bit of reading but my question is "Should I reformat the FAT32 to make it more of use to me?".I cant really see the need arising to access older OS files, except .JPG's (photo's I had on my old Windows ME Comp) or "Should I move all my smaller files (documents and photo's) to the FAT32 partition and use the NTFS drive for the bigger files?"
My hard disk arrangement is C(primary partition FAT32)for Windows XP D(extended logical FAT32) for non-os data (movies, pictures etc..) F(primary NTFS) for Vista.. I am formatting F: and then C: through XP installation CD (and C->NTFS from FAT32) is this ok??? will D: be accessible after installing XP on C???
I would like to know if it´s possible to take free space from an extended partition and redistribute it to a primary partition using partition magic 8.0..both partitions are NTFS
Now I am having multiple new problems. I want to completely erase the hard drive and install a new version of XP Home, not Pro. At the beginning of the installation process, it gathers system info. Immediately it responds with "no valid system partition" and the only option is to exit from the process. How can I get past this to complete the installation?
My existing C: drive. First I was getting the "Error 983" error. Then I un-installed SP2 which was causing a gang of problems, freezing programs for a couple mins mostly. After I got it uninstalled I did a disk defrag, then a chkdsk /f. Now I have partitioned the drive using PM8 again and this time after the reboot it is telling me it is completed but once Windows XP reboots there is no new partition.
Im trying to install Suse Linux 9.0. But I really want to have 2 new partitions, one for Suse, and the other as a back up.
I had perfectly working PC with XP Pro installed on a 160Gb Maxtor HDD.For no reason I error checked the hard drive, which the system did after rebooting, at the end of the test the system rebooted and announced that there was a error on the boot and boot.ini.Useing XP Emergency (on disk) I tried fixmbr which did nothing then I tried Fixboot. XP found the drive identified it as FAT and said that it was successfully fixed.The drive was FAT and is now unusable.Partition Magic sees it as a FAT drive as does XP when I switched the HDD into another machine.
i plan to format my computer again and this time i plan to split my primary partition before i format. When i go to format i want to format only the active partition with windows in it.I have two questions. This trick does work right? the partition i created in windows using magic partition 8 won't be formated along with the active partition right? I plan to backup everything on my second partition.When i created the second partition i had two options. to either make it a logical partition or a primary partition. I chose primary partition. would that work?i plan to install windows xp pro sp2.
Over a year ago when I setup my new system and before installing most of my APPS, I backed it up to a small HD. My Win Xp Pro MCE 2004 has become a little buggy (MY FAULT).How would I copy or clone the smaller HD over to my 80GB drive AND maintain the larger partitions? I have Ghost 2003 but I'm not sure if it permits me to set the partition size when copying HD's.
I reinstalled my OS several months ago, and decided that I might want a dual boot in the future. I already had an old, smaller drive in the machine that's labeled the c: drive. Reading one time that for security purposes it's good to have your OS on a drive other than C:, I decided to not alter the drive lettering.
I then partitioned a new internal hard drive into several logical drives. I formatted the D: partition as a Dos fat32 partition and the rest as NFTS partitions. Somehow, I allowed the D: partition to be the primary partition, while the E: partition which contains the Win 2000 Pro OS Winnt directory is a logical drive.
When I just checked disk management, I noticed that not only is boot.ini on the D: Dos partition, but so is ntldr along with the following Dos setup files:
To reformat my computer now and i downloaded all the files i'd need to reformat and compressed them into a single rar file to put onto my d drive.
Although when i go to move theses filesonto my d drive i get a message saying: cannot copy "reformatfiles": There is not enough free disk space Delete one or more files to free disk space, and then try again Free space on this drive by deleteting old or unnecessary diles click disk cleanup.
I've just resized a partition on my main physical drive, and the OS sees the adjacent partition as unfromatted.
I'm using Partition magic pro 7 and WinXp pro.
The partition I resized is the primary OS partition which is formatted as NTFS, the adjacent partition is FAT32. How can I get XP to recognise the FAT32 partition again?
I decided to try Linux. 'Ubuntu' was my type selection. After trying by running off a CD I then decided that I would pick up some partitioning software like 'Partition Magic' or some software along that line to do the partition. But somewhere(s) I read that virtual or software partitions are less then a good idea for reasons I don't recall at the moment.
Is it possible to recover data from an external HD that I accidently deleted the partition and created a new one I just got a "new" computer - it's actualy a hand-me-down that I was trying to do a clean install of Windows XP on. I booted it up with the XP disk in the CD drive, and thought I was telling it to delete the existing partition and create a new one on the C: drive, but I didn't realize that it was also recognizing the external drive, which was already plugged into a USB port (why I even went ahead and plugged it in I don't know - that was stupid mistake It was the first one listed, and I thought it was telling me that there were two partitions on the internal drive, not two drives I also didn't pay attention to the size it was telling me the drive was (stupid mistake #2), I just told it to create a partition with the maximum possible size
when i open Partition Magic 8 i see my Maxtor 6Y120P0 drive in a yellow color and the file system marked as "other": but my Windows 2000 Disk Management shows healty: under windows i can read and write to the partition, so what is wrong? what does Partition Magic wants?
I am about to wipe my h/d and do a clean install of XP. Master h/d is 40gig with a 160gig slave. What size partition should I make for the OS on master h/d? Original set up had none, just 40gig. I am thinking 10 to 15 gig but someone told me that's far more than needed. I guess it isn't terribly important, just looking for input and opinions.
Compaq PC that's a couple years old. The motherboard took a dump around the holidays and I replaced mb and processor then. The 160 gb drive that came with it has a 5 gb partition that's part of their restore bs. I'd like to dump that partition and make the c: partition back to full size. Is there a freeware app that'll do this without having to nuke the drive and reinstall the whole she-bang?
I need to reformat but I don't want to back up everything to CD's, and I don't have a better solution, my friend reccomended I partition the drive, move backups to the second partition, and reformat the primary partition. I was going to use Symantec's Partition Magic, but I see it costs quite a bit of $$, which I don't feel like spending on something I'm only going to use once. I was wondering if you guys would give your info on partitioning and telling me if this is even possible, and give me a good program to do so.
Trouble downloading with win98 it kept coming up with errors so I upgraded to winxp and it downloads great now except there seems to be a partition made when I did this and startups seem to take longer is there a way to get rid of all or most of the win98 so I'm with just the xp? No partition?
If I have a corrupt install of windows that still boots, can i install another copy of windows on a different partition, just using the system disk not anything like partition magic, and transfer files between the 2 partitions? I'd then format the corrupt partition.
I have a Samsung 160 gb IDE hard drive that was loaded with about 90 gb of music. I tried cloning this drive to a brand new Maxtor 250 gb with a ******** cloning program on the Ultimate Boot Cd 3.4..The clone took about 6 hours and when it finished, it said it completeted with no errors.. The problem now is that when I plug EITHER drive in, it does not show ANY of my files! I immedietly focused on retrieving my data from the OLD Samsung drive and for some reason when you connect it to Windows, it only shows it as having ONE 30gb partition that needs to be formatted? Has the parition that was holding my music become damaged? How do I access it again!? Its making me sick to my stomach to think I may have lost all this music
I'm trying to install XP on my new system (differnt thread for that problem lol) I read in a few threads that some like to make 2 partitions and use 1 small one for XP/OS and the rest for data programs and whatever else. 1. Is this the better way to go and if so how big should the OS partition be?(400gb hd) 2. I make the 2 partitions while installing XP do I make them both NTFS or do I leave the bigger one in raw format?
I got a laptop its been going good for ages, it has a partition C: is fine but D: has changed from NTFS to RAW now I can't get into it at all, all my pics, music, and word documents all unaccessesible, is there a way to put the NTFS partition back into D: with out losing all my information ? all help will be greatly appreciated thank you so much. Peace and Blessings.
I am having great difficulties in changing my partition. I have AcerPower with XP. Of course no discs came with the system (who's brainstorm was that idea) and I developed a virus and decided to reformat the drives to clear the problem. Yes, The partition is currently at 50/50 and that's no good. I want more like 95/5.
