with new instal windows new drive i just recieved a replacement ibm 120 deskstar for my amd athalon im trying to instal from the windows cd everytime iget to the screen that says to creat or delte a partion it show the unpotion drive space i click eneter to instal the partion and it tells me theat there is not a windows compatiable partion to in stall to so i back up and try to cc reat a partion (C) but when i type in the partion space nothing happens the screen just keeps cycle the same options please help.
i was currently running windows as my only operating system (working perfectly) and decided to try out ubuntu. afterin installing it i decided i didn't like it so i put in my windows CD and deleated the 1st 3 partitions and combined them into a 49gb partition, formatted it and installed windows on it.this worked fine, it formatted correcly and then started copying the setup files onto partition 1, but then after it restarted it wudnt see that windows was there and wudn't continue the installation. it would just go back to asking if i wanted to install from the CD again. i was installing windows xp (no service pack) but i have done this many times with this CD and hasnt stuffed up yet.
I have integrated the drivers onto the windows xp home disk using nlite as well as integrating sp2 but after the restart it keeps saying failed to load os, why should I do to install it on my sata drive? this is making me consider consider vista, does vista install to sata drives straight from the disk?
My old IDE hard drive went out on me so i went and bought a 500g WD SATA hard drive. When I put the windows installation disk in it does not recognize my SATA hard drive. after looking into it online, i found that alot of people had this issue. I read a few suggestions and tried them, (using the F6 function during install with drivers on a floppy disk, and streamlining drivers intot he windows installation disk itself using NLite), and none of them seem to work. I then used my friends old IDE hard drive, installed windows, and used a program to make a disk image of my hard drive and transfer it to my SATA drive. This didnt work either. I havn't fiddled with drive letters, (you know c: and e: and so on) i am thinking this may help but I am not sure. It is not a boot order issue i know how to do all that and nothing works. I am looking for a way to get Windows XP onto my SATA drive. (yes my mother board detects my SATA drive, and it is showing up in windows i just cant seem to get windows on it.)
I would prefer to just copy it from my IDE drive since i have already installed all the updates so if this is possible please let me know.If you know what kind of boot disk i need for windows xp installation to recognize my sata drive during installation that would be a big help too. (i have tried sata controller drivers for my motherboard, i tried using the software that came with my hard drive, and this too didn't work.)
I'm trying to format my hard drive to install windows XP pro,I currently am running windows XP pro.The problem is I can't format, when I try to format with a fdisk I get an error saying:"Your program caused a divide overflow error.If the problem persists, contact your program vendor."I also use windows XP CD and the problem with that is when it gets to the blue screen of windows setup it freezes.Anyone have any idea how to solve it and get my hard drive formatted.
I have a five year old dell dimensions 8200. Three years ago, I added a 250 gig. D-drive. My computer has been so slow that I wanted to reinstall windows. So, erased and formatted my D-drive and put windows on it. I then added a program called "Wipe Drive" in order to erase my C-drive. (I was thinking to use my d-drive mainly and c-drive for backup). I closed my computer, then when I went to reboot, i first got the message "ntldr is missing press control alt delete." So, I did this. I soon did not get the ntlrd message and got a message saying failure to boot and press contol, alt, delete to restart. I tried to instal windows again and it did not boot. I did the f2 thing and made sure my cd-rom was first. I did the f12 thing and tried to open cd. Nothing has worked to help boot or get to the blue screen that lets me choose drive.I think I erased important start up info on my c-drive.
I'm running a pc with a 975xbx board and an e6600 that has worked fine for 2 years plus. A couple months ago i replaced my computer case, power supply, and got some new storage hard drives, but my RAM, mobo, cpu, and optical drives stayed the same.I was running windows xp fine for this whole time....and then a couple days ago as I was surfing the web, the computer just shut off spontaneously. no warning, no nothing, just black screen and the computer was off.Now, when I start up, I'll get to the windows startup logo before I get a 0x00000007e blue screen crash.In BIOS, my hard drives, RAM, etc are picked up fine. Just for kicks i moved some ram around, dropped to one stick, unhooked the optical drives, yet the problem persists.Now, if i throw in my windows xp install CD and try to repair or just reinstall, it doesn't find the drive at all. but the bios does.
If i take a new formatted hard drive and insert it, the xp install again doesnt find it.I have 2 raid controllers on my intel board, and the floppy disks for both, but when I boot the raid controller screens pop up fine and recognize drives prior to the windows logo. If i throw my install CD in, however, and hit F6 to go to the raid controller install, the xp cd can't seem to read my floppy disks, as if they aren't even there. but the floppy drive light is on, powered, and the cables are plugged in.This is just really confusing, as if my computer just doesn't read anything but the CD drive.I'm at a loss. I'm willing to just do a clean install of windows on a formatted hard drive, but the windows CD install program won't detect the new drive (it is low-level formatted).I'm using XP professional and it's a full install CD, not just recovery.
I have a compaq presario x1000 that is virus infected. it loads windows very slow and the dvd cum cd rom does not work. how can i reformat my laptop? is it possible to boot it using a usb pen drive since my dvd cum cd rom does not work?
if i do a clean install of windows xp to replace windows vista, will it create a windows.old folder that has all the stuff i had from before the clean install?
HI, I just installed windows 2000 professional onto my computer. Everything works fine except that the resolution is really grainy. On some web sites I cannot even make out what the words are. I found out that when I go into my monitor settings in display properties I am unable to install the drivers for my monitor. Does anybody know a way in which I can get around this.
My system is running with Windows 2000. Now, I just want to install Windows 98 on a separate logic drive, but it is immpossible to run the setup programm under windows 2000. How can i install windows 98 just the same.
I have two computers, one I use for gaming, the other for school. Both computers had 60gb Maxtor (school with lots of room, gaming with about 10 gb free). My school HD took a powder (the evil clicky noise of doom), but I was able to back up my files prior to that. Me being a quick thinker, I decide to upgrade my gamer puter to a 120gb (don't wanna go too nutso, as I am considering building a much superior computer), and put the good 60 gb in my old Athlon 700. Problem? I cannot get Windows XP Home to complete install on my gamer computer. (Athlon 700 installed just fine with 'good' 60gb).Gamer Computer: Athlon 1800+, 512MB DDR Ram 2100, KR7A Raid MOBO, GeForce3 Ti 200 (128MB DDR RAM), SB Audigy 2(AGP).
It is a RAID mobo, but i do not use the raid functionality, I did not have a problem before(I have my HD and my 2 roms on ide now). I go through the install steps, and I get to the very very end, where it states you are about to start Windows XP, and then it hangs, and thats it.I have tried to ensure there are no conflicts, I pulled out my sound card as well as my network card, and 're-seated' my video card and RAM. I have tried looking at using a winxp bootup floppy, booted into safe mode (the only error it detects is the missing RAID, no conflicts detected there). Heck, I even swapped out mouse and keyboard. I tried putting back the good 60gb back in the pc, and reformatting, but still get the same thing(sometimes the screen is black, sometimes the icky blue of xp, but that's it).I have no idea now. I did make sure that my bios was up to date before taking down the system originally, and it was, so no change was made there. Even swapped out the ribbon cables to ensure nothing was damaged on original removal.
I want to install a new primary hard drive and reinstall windows xp from scratch on the new c: drive. For the moment I would also like to retain the old disc contents and the xp operating system. To try to do this I installed a second hard drive and cloned the old drive c: to the new drive f:. I created a dual boot computer by editing my boot.ini file so I could boot from either the c: or f: drive. I replaced my primary hard drive with a new drive and booted up in the f: drive. Then I cloned the f: drive back to the new c: drive creating a dual boot system. My concern now is that if I reinstall windows xp on the newly installed hard drive, the Dell installation disk will wipe out the operating system and the contents on the f: drive. Is there any way to retain the old system? I'd appreciate any help with this.
My themes were all working fine but one unfortunate day i was installing one of the themes and it asked me to reboot from then on am not able to use any of the downloaded themes but i can use the themes i had installed prior to that i can use the themes i installed after that fatal installation. now the problems am facing are if i double click on a windows visual style file the themes (normally a window open with a preview of the theme) i dont get the preview of the new theme but the preview of the previously applied theme. If at all i save all the windows visual file to default themes folder and the go to properties->themes-> i just get a black box in center and if i apply that i get windows classic theme *the other problem is i get shrill noise which is unberable sometimes from the pc. i dunno how to rectify it.
I'm thinking about starting over. I have an O/S (winxp pro) that is hopelessly messed up. Is it possible to install a new HD, install xp pro on it and then install the present c drive HD as d drive and save all the data on it to the new HD? I don't want to reformat the present drive and loose everything there
i am trying to install windows xp pro onto. The problem is, i have a sata hard drive and no floppy drive. That means that i have to slipstream the sata drivers on a boot disk. I know how to slipstream, i just dont know what to slipstream. I have an ASUS a8v deluxe mobo, and i am not sure what drivers i will need. I think i am going to need Ulsata and viasraid
I cannot install windows on a PC. When i boot from either any windows xp cd or even windows 2000 cd, the first part of the installation first loads all the files and just as it says "windows is now starting up" whereby i should be given the option to press enter to load windows.the machine shuts down. I have tried everything i know.but it always shuts down at exactly the same place.
I dont know why but i cant install windows XP SP2 on my friends laptop. Its a Prestigio, it a 1.7 celeron with 1 gig of ram, 40GB hard drive and an ati mobile video card. When i install it everything works fine up until it asks me to enter the product key, at which point it tells me the key is invalid. Now i have reinstalled a spare computer with windows XP and used the code and it goes through fine (i didnt continue the install) but everytime i put the code into the laptop it doesnt work?
I am trying to install windows xp pro on my computer and it loads all the files from the CD but directly after it exits the blue windows xp install screen and then a flashing underscore (_) just flashes for ages. Does anyone know what to do? by the way i have a foxconn 945G7MA motherboard and a 300GB ATA conected harddisk as channel 1 master.
I have an Intel(R)Celeron(R),cpu 2ghz,Windows XP home 2002 with SP2. This was bought from Tiny computers 2 years ago. I never had the windows cd - it was already installed. As you may well know, Tiny have gone out of business thus my total care cover is now void. There is no problem with my computer at the moment but I have been looking into how to re-install if it should become necessary. Simple advice would be appreciated as I am not very computer literate!
just booted and installed windows xp SP1. I have 4 other computers connected to a working wireless router, with this computer connected by an ethernet cable. The cable is working properly, because my laptop can connect to the network through it. I need to connect to the internet on my new computer to run updates, download latest drivers, etc...basically getting this beast ready to start installing my favorite programs and games. But, when I plug the ethernet cable into the port on the mobo, windows doesnt detect it. There is no LAN option in the 'Network Connections' folder, but a '1394 Connection'. How do I get windows to reconize the port This is either a problem with the MOBO (asus crosshair) or a problem with SP1, and i dont know which
how do you create a self install cd of windows BUT installing it without any windows screens showing up only the ones I made myself. then it reloads to boot the system.
I have just done a fresh install of Windows XP - all is fine.Question - I am just downloading 92 updates from the M/soft site!!! Is there anyway to get hold of these and burn them to a CD so next time.
I have two problems, the file siteadv.exe is missing. I don't know why I can't get this fixed on McAffee's site, but when I put in my windows XP disc, the disc runs and the menu pops up. I click on install and a progress bar runs for a couple of seconds, then it says it needs to restart. The system restarts, goes to desktop and that is all. I get no menu that allows me to repair or anything. Do I extract this file from the windows cd, and why can't I get the cd to do any more than what I described. I have a dell XPS400.
i have a friends pc here that crashed and went to blue screen whilst playing a game i have tried to go to all the options like safe mode ect and it just rebooted, so i did a format of drive c: when i tried to re install windows xp there where lots it wouldnt load, dll files sys files ect and then it goes to a blue screen again. i spoke to a tech guy at work that told me to get rid of the partition and make it one fresh drive with a wipe now i am stuck with what to do
I would like to un-install Windows Messenger.I have never in all these years used it and it's more of an annoyance than anything else.Looking around on my computer I don't see how I can un-install it.
I have never had a problem before with windows updates. however, It says I need to download that windows validation tool so I click on it to download and install and it goes through everything like it should then says it failed to install, 4 times now it comes up error 0X80070005 I went through the thing where Microsoft is suppose to help you they get info and then help you solve it, I stilll haven't heard a thing from them. The funny part is that I downloaded the windows defender (Microsoft Antispyware) and to do so I had to go throught the windows validation and no problem it went through it and I downloaded it. Is that the same thing as this windows update? anyway I can't find error 0X80070005 can anyone help because I got thinking that I haven't had any windows updates for awhile I wonder if I can't get any until I get this downloaded? Any help would be appreciated
