I recently just fixed my computer so that I have two OS's running on two partitions.My new OS works fine, but the original one i can't get into because I get an error saying that hal.dll is invalid or corrupt.I figured that I need to repair my boot.ini to fix this problem, but that requires an OS CD, which sadly did not come with my computer. Is there a way of getting my operating disk? or is there another way to repair the boot.ini without the CD?
I installed Windows XP Home on a barebones computer, and mistakenly made the partition for the C drive much smaller (1.96 G with only 33MB free) than the D drive (1.6 G used, 24.9 G Free). Now I keep getting low disk messages. I want to resize the partitions so that the C Drive is larger without having to reformat both drives if that's possible. The file system on the C drive is NTFS and FAT32 on the D drive.CPU is 1.3 Ghz Athlon with 120 RAM.
I have a question for you all and I hope you can answer it.I have two partitions on my harddrive at the moment. The first partition is my C: partition, where Windows XP and all the applications are run from. These partitions were set up by the people that made my computer. I have about 4 % diskspace left on the C: partition and I want to create more storage space on the hard drive by removing the second partition.The second partition is a back up of my older hard drive.I have both backed up already on external harddrive and I use Acronis True Image 10 Home to make a weekly image of my hard drive.
Hey there, i'm currently running on Windows XP with a 120 gig Maxtor Harddrive. During my last reformat I'm guessing I did it wrong and mistakenly made a second partition while leaving the old one intact. I've checked through all my biggest storage heaps for what could be causing my HD to be so full. But my multimedia section is only 28 gigs, whereas the harddrive is showing 85 gigs worth of used space. Multiple partitions is the only thing I can think of. So is there a way I could find out if I have an extra partition, which one is the right one to delete, and the process of deleting it, possibly without having to transfer all my files. Any help would be appreciated.
I am going to re-format my 40 gig HDD for reasons you do NOT want to wade through I currently have four partitions on a 40 gig HDD, two bootable c: w98; d: XP Pro. The W98 partition is wrecked and I also have wanted to setup a linux partition so I can learn that system and play around in the "open source" universe, so now's the time. The question is, given my 40 gig capacity, what is the optimal setup for the new partitions
Under my computer, I have two drives, C and D (empty). I have never intentionally partitioned my hard drive into the two drives, and have thought nothing of it until recently when I realised I have only 1GB of space left of the 45GB on the C drive.I was just wondering if there is an easy way of recombining these two drives so that I can have just one big drive back. I have heard that commercial products such as partition magic do the job, but I can't see much point in paying 70 for some software that will only get used once.
So right now I want to format my computer and I am. Right now I am at the part where you can create/delete partitions. What I see right now is this.Unpartitioned Space 7MB D: Partition 2 [NTFS]182001 MB (181831 MB free) C: Partition 1(PRESARIO_RP) [FAT32] 8771MB (598 MB free), so I have two exact computers In my house and one of the disks I used to format wasn't working and was scratched so it got messed up at the end and I quit the installation.So now that up there happened Where do I install?Can I delete the other ones after picking the one I need to install in? And do I need to download something else after I delete those, like Partition 1.
XP home edition re-installed, it gave the hard drive three partitions, C, D, and E. C drive has 9.75GB the other two have over 60 GB. I need to put more back to C drive.
1st post here and I hope someone has answers. THis is new to me. Ihave a 200gb HD. I have it partitioned into 5 partitions. Onepartition for my C: OS, D: Software, E: Games, F: Storage, G:Graveyard. Well I do this so if anything happens to my OS, I canreinstall and all my other info is safe. After the reinstall of myOS, everything was perfect, I had some issues with my G drive andaccess denied but I managed to take ownership. Well I installed someupdates etc last night and did some restarts without any issues. Idecided to do a disk check on G upon next boot up. Well I just bootedup this morning and only my C drive exists now, All my software whichis installed on my D drive is now inaccessable as well as all theothers. I went to Computer Management and it shows the rest of mypartition as 175gb of FREE SPACE?
I have a 200gb Seagate SATA HD. I have it partitioned into 5 partitions. One partition for my C: OS, D: Software, E: Games, F: Storage, G: Graveyard. Well I do this so if anything happens to my OS, I can reinstall and all my other info is safe. After the reinstall of my OS, everything was perfect, I had some issues with my G drive and access denied but I managed to take ownership. Well I installed some updates etc last night and did some restarts without any issues. I decided to do a disk check on G upon next boot up. Well I just booted up this morning and only my C drive exists now All my software which is installed on my D drive is now inaccessable as well as all the others. I went to Computer Management and it shows the rest of my partition as 175gb of FREE SPACE? Anyone has any ideas? There is no way that the rest of my drive is formatted as I never touched it so I assume it is still there.
i'm running xp proffesional sp2 i'm wanting to know how i can merge my 20gb system drive back into to one. it is currently split into two called: local_disc C - 11.2gb system_sav E - 7.69gb (this drive partition is blank and has been formated) i would like to merge these two partitions into one.
I have two partitions set up on my usb thumb drive. On the first partition it is a version of Linux (Slax) that I use for emergency boots the fs is Fat16. On the second, I have a standard Fat32 filesystem. But, when I plug in the drive while in windows, only the first partition shows up. I have made both the partitions bootable.
I had C: and D: and sense windows keeps be ing gay and needing reinstalls of fresh copies, I loose my games on C:. I dont have enuf space on D: to put games. So when I reinstalled XP today, befeore i installed I gave 2gb of unpartioned space to C: and now I cant access the other 30 or so gb. 1. How can I retrieve this 30 gb? A. Put it on D:? Or make a G Drive? ty
I have a Windows XP home setup on a pentium IV system. I have two hard disks partitioned to give 3 partitions on one and two on the other. Quite often when I start windows it appears to boot normally but in Explorer I can only see the home partition. Explorer runs very slowly and crashes. I've checked for viruses, run adaware and spybot but can't fix it. I have AVG and sygate personal fire wall running.
I, as do most, hate Windows Vista. Even after turning off the UAC and removing components that i found unnecessary, I still found problems. I much prefer Windows XP. Instead of manually removing components, security settings, etc., I decided just to remove Vista itself. I have searched and searched for a forum all over the internet and all i can find are threads about partitioning of about replacing vista on a laptop (which apparently has SATA driver problems or something to that effect). So I was wondering a few things: 1) Is there a way to install XP over Vista directly?
I am wanting to re-install windows as the computer no longer boots into windows.I have gone through the full f disk and format c: scenario while deleting creating partitions and then insert the CD to boot from so that the xp installation can begin.I feed the correct sata drivers and it finds the hard drive. here is where it goes wrong, I delete all the partitions listed and create a new one with the full 125gb of space. It then asks what i wish to format the partition with and i select NTFS. It goes to the screen signaling that it is beginning the installation but goes through it very quickly! as is complete in about 10 seconds, at this point it comes back and says "setup was unable to format this partition. The disk may be damaged "make sure the drive is connected to the computer etc etci don't think the drive is corrupt as it was working before i tried to restore my pc to a previous restore point when the pc was fully working after getting the pc back from a friend with missing registry files. (At which point i forgot the installation was also corrupt due to missing windows files, and not when i had successfully re-installed xp before lending the pc to a mate)
I have an issue here. I have a computer with a faulty version of Windows with some features missing. Basically, I have a Windows XP CD and I want to reinstall windows without reformatting. What i'm thinking of doing is setting up partitions C: <- For the new Windows Installation D: <- Previous Installation and maybe: E: <- Ubuntu F: <- Swap partition I don't want to use the previous installation, I jsut don't want to spend several days backing everything up.
I purchased a Dell Laptop two years before for working with PLCs at our machines. The laptop has Windows XP and only one partition 80GB. I installed many softwares in it. All my data is in this partition and I fear if anytime windows would corrupt, all my data including softwares for machines would also be lost. I want to create two or three other partitions but wondering how to do. Can anyone help me out?
i have bought a new hard disk and make 3 partitions- C, D ,E drive my C drive only has 10gb and now i want to make downloads and install all to D drive.. i try to move the whole programe files from C to D but fail as some files are either running or not moveable
i upgraded from windows 2000 pro..to xp pro...but instead of overwrite it created a dual boot......i want xp pro only...and the memory space that 2000 takes up....how do i unintall or whatever...where i only have xp pro....don't forget i'm as dumb as a rock...computer wise...i have dell compaq......if u need more as to specs..i'll find it..but difficult cause it locks up......
I am setting up a dual boot system on my comp with two partitions. What I want to do is Lock down the partitions.
So say when I am logged into Windows XP disc C: I wont be able to read or write files on the Windows XP disc partition E: Both are parititioned as NTFS is this a possibility
i have Windows XP Home edition i got the "NTLRD is missing press ctlr alt del to restart" error i do not have a windows xp cd i found a Windows 2000 server CD and i installed windows 2000 on the same hard drive but on a new partition i can now boot Windows 2000 in my computer it shows two drives C: and H:
c=Windows 2000
h=Windows XP
i found the NTLRD file online and placed it in H:now how can i boot windows XP instead of Windows 2000 ?
My company was messed up so I decided to clean reinstall xp pro, my hard drive was split into 3 partition, C, E backup and L photos and bits, at the point of the install were you decide,delete our make partitions, I decided to delete L as it was not needed and clean install onto C, leaving E with my docs and data
The install went fine, when I looked at my drives in admin tools the C is marked boot and E system, I was going to delete E and make new partitions, but because it marked as system, can not delete it.How did I do this and is there away to put it all back onto C, without reformatting
i realised my pc cannot resume from a standby or hibernate. it shows a BSOD. some kernel inpage error. i surfed several forums about it.they say to run dskchk. but i cant use any of hard disk utilities. dskchk doesnt find my drives. i installed HD tune. it says no disks were found. i thought maybe somethin is wrong wid OS.. so tried a reinstall. but even it cant find my partitions. so i cant even format my pc now.. i can open & use my drives perfectly from my computer but problem is with disk utilities... Disk management doesnt show any of my partitins, it only shows my dvd drive. disk defragment shows them but cannot defrag. so i cannot defrag, scan for errors, format any of my drives. at one forum sum1 mentioned trojan remover can fix this... i installed it & started scan.. but it detects my system files as malicious & asks for action. but i aborted the scan cuz i'm afraid if it deletes or excludes sytem critical files i wont be able to boot & neither i can reinstall OS. so there is very much chance of data loss.
I tried to increase the size of my C drive by deleting the D drive partition. The D drive was deleted but the C drive size appears the same. How can I now increase the size of the C drive to fully occupy the space that the D drive previously took up. I would like to end up with one large C drive and no partition.
I tried ghost 2003, the cloning of the larger drive to the smaller one didn't work (too big it said), I cancelled the operation, however, I now have a new partition on my drive, by looking at disk management, I now have cpavilion) D: recovery and this new drive G:VPSGHBOOT. I don't want it anymore. PC's 200 gigs, now it's divided into D:5.32 fat32 c:181.07 ntfs g: 7.00 fat, and also an unallocated 159.97 gigs All these fall under Disk 0: Basic 346.28GB online doesn't make any sense.
Found some very useful info on here so decided to sign up and post a recent problem i encountered with an external hard drive. the hard drive has a capacity of 80GB and came from another pc. there was a 25/55 partition already on it from the old pc. i tried to delete the partition that was 25gb. now i can't find that 25gb at all. when i plug it in to the usb slot i can only see the 55gb partition it used to appear as 2 hard drives in my computer and nothing else. when i use disc management to format it i only see 55gb.
I have a Thinkpad T43 with Win XP Pro. The 60GB hard drive has two partitions: one is an IBM_PRELOAD(C) and the other is an IBM_SERVICE partition. I would like to duplicate this disk onto a 120GB disk. I have tried to use the Win XP backup Retrospect Express 6.5, but I can't get either program to duplicate the IBM_SERVICE partition.
I want to partition my new hard drive. Its external. OS is windows XP. I had a look on the net and it looks simple, go to disk management and right click on the drive you want to partition and select 'new partition' This is the problem, i dont have the option to create a new partition. I have formatted my drive to NTFS and there is no data on it. It currently shows one partition the whole size of the drive.
