The connection was reset , or it has timed out I've tried everything it said to do except this one, how do i do it; it says if your computer or network is protect by a firewall or proxy, make sure that firefox is permitted to access the web.
View 11 Replies
I have lost the timing bar on my tool bar for no apparent reason, I still have the clock etc. and the start bar. I also lost the Google toolbar, which I re-installed. I have tried all methods to re-stall the timing bar without success.
View 9 Replies View RelatedI started this thread many weeks ago and was being helped but had hardware problems and commitments and I have to start again.I have up to date XP2 in a clean system. The problem - unimportant but annoying, is that my screensaver, whichever I use, unpredictably resets to one minute no matter what delay time I set. When it does this the screensaver does not run. I admit to sloppy attention to detail - I can't remember when this started but it was probably more than a year ago. A quick fix would be nice but now I have a bit of time to experiment.
View 10 Replies View Relatedhi everybody.every since i install sp2 on my pc ,kazaa lite has a problem with connection.it keeps trying connecting but it reemains on trying, even if i let for 2 hours
View 2 Replies View RelatedI shut down system restore and went into safe mode to clean out spyware,ect. In safe mode, spybot,i used ewiedo,smit,adware. i dont recall but i think spybot was the only program to find an item. When i rebooted in normal XP, i have been unable to connect IE6,Weatherbug,Widgets to my wireless connection. However Firefox is connecting pretty good,atlhough my wireless program is funny, its telling me there is no internet connection as i surf I tried 'internet options' such as resetting IE, i tried that scannow command. again, i dont have the system restore option to use. but also yahoo widgets are not connectiong nor weathebug.
View 3 Replies View RelatedI'm setting up my friends home network. They have 2 PCs connected via ethernet and one laptop on wireless. The router is a wireless router / modem from 2wire. PC number 2 and the laptop both connect with no issues. PC number 1 is weird though. I can go to 192.168.1.254 and it opens up the router system page and I can go through and change and view settings. However when I try to go to any websites it immediately goes to "Internet Explorer cannot display the webpage." I have tried netscape and the iTunes store and nothing can connect to the web. I have linux ubuntu on a Live CD and I can boot from that and it connects to the internet just fine.
View 2 Replies View RelatedWhen I start up my pc I can not connect to IE. I have window XP SP2 Professional. I start up pc AVG will update and scan for virus while scanning for virus I tried to connect to IE which I can not connect to IE I have to waite until AVG stop scanning for virus and then I have to reboot the pc so I can connect to IE, I have check all my Network connection, my ISP every things O.K. and sometime it take long time to connect to IE
View 3 Replies View RelatedIve been trying to add a wireless laptop to my desktop dsl. There are only two computers. The desktop win.xp already using dsl from att. And the new laptop with win.vista premium. Next is the linksys router which I cant make head or tails how to hook up. I called linksys and was asked to hold for a tech.that could help me set up the router. After fifteen minutes holding, the line is hung up by them and the phone goes dead. Im no better off now than before I made the call. And still not wired up to go online with the laptop. As for knowing which wire goes where I know nothing, 0, of how to place the wires. So Im hoping someone here can tell me. I went to HELP @ att and couldnt understand how to fix anything. Probably more fault being mine more than theirs.
View 3 Replies View RelatedMy buddy recently had a system crash. (XP) He used his system restore cd and all is working well except.he is not able to connect to MSN. We have tried to reinstall but get a not able to connect message. We have restarted, checked the physical connections.
View 3 Replies View RelatedMy son cannot connect to any ISP on his PC, he tried AOL and People PC and each time he gets a message " This page cannot be displayed" I believe he said that AOL told him the problem was with his computer, he called the Computer company and they said his problem was not the computer, it was the fault of the ISP.
View 6 Replies View Relatedi've follwed every steps written about Remote Desktop and still can't connect to the remote computer. Is it because I use Panda Platinum instead of Windows Firewall?
View 1 Replies View Relatedafter download the newest windows-update - after starting or change the user, the browser dials immediately to our provider. (automaticaly Connection) How can I stop the automaticaly connection or disable it
View 2 Replies View Relatedmy computer crashed and I reinstalled windows xp then used the duracom recovery disc. Now i can't connect to internet,they tell me to copy drivers to disc, but don't understand how to do this or what to download to disc to reinstall to my other computer
View 6 Replies View RelatedIt keeps on saying that the port is in use by another application or somethin of that nature even when there are no other applications running.and only essential process' are running.
View 3 Replies View RelatedSo I think I may have gotten a virus, I am unable to connect to the net and AVG refuses to install because it can't write to the registry, thats what the error says.
I'm installing the latest version of avg 9, and I can't install it in safe mode eitheir.
My old computer is a Dell Optiplex GX1 Pent3 with a fresh install of Windows 2000. My brother had been using it with Win 98 and a dialup connection and all was fine. Prior to that I had it on a DSL connection. Now I want to get it back online at home where I have a cable modem and my usual computer with a DLink router.I know the router and cable are ok because I just had another XP computer on it.Nothing I do will seem to connect the Windows 2000 Pro to the internet . I tried disabling the onboard LAN connection(a 3COM 3C918 Integrated Fast Ethernet Controller and installing another LAN card but that didn't work either. I also connected it to the modem without the router.
View 9 Replies View RelatedI am unable to connect to the Internet with IE 6, but Firefox 1.5 works fine. Pc-Cillin also does NOT connect for upgrades. Another oddity is that FTP connections in IE 6 seem to work fine.Through another forum, I found out that if I open a webpage through My Computer, it also connects just fine.
View 14 Replies View RelatedI have Windows XP SP3 and I did some updates two days ago: I allowed a java update that was hanging around in my lower tray for a couple weeks, updated my adobe to the latest version and I updated to Internet Explorer 8. After having IE8 for less than 24 hrs, my husband and daughter said they didn't like it, so I did a system restore to three days ago and now I can't connect to the internet at all. From the small amount of research I've been able to do here at work, it seems that once you download IE 8 you can't revert back to a previous version? Could anyone tell me if that's true? I can't even open the internet options tab from the control panel to see if there is a settings problem.
View 14 Replies View RelatedI can't seem to be able to connect to my wireless Internet on one of the computers I have. (It's NOT a laptop) I plugged the router into the computer and it can't find my network, or any, really. It works on a different computer. I'm guessing the wireless config is turned off or something. I have played around with the computer and can't seem to turn it on. Where would it be located? I'll post updates as I get them.
View 2 Replies View RelatedI recently had to take my computer back to factory settings and now I cannot connect to any web servers eg. music planet.
View 2 Replies View RelatedI have been having alot of trouble lately. Every time I try to click on a site I get an unable to connect message, if I go back and try again it usually goes through the third or fourth time clicking the link. This is happening with every site. I am running windows ME. I have tried disabling Norton, running ccleaner, all spyware utilities and nothing helps. It has taken me about 45 minutes just to be able to post this message.
View 1 Replies View RelatedSorry if this has been asked before. I have an HP pavillion laptop with win XP. I have a movie i made with windows movie maker stored on the LTop. I also have it saved to a cd-r disc.What do i need to do so that I can play the movie (running it from the saved movie on the Ltop, or playing the CD in it on the Ltop) on a TV. I would think that all I need is some sort of cable;the ones that have red/white/yellow ends on them or something similiar.I want to show my family the mini tale i made on my 25" or 32" Sanyo tv, (and not my laptop)
View 8 Replies View Relatedi am having trouble connecting to the internet on my xp pro. i am using a wired connection and it detects the connection and connects but then it crashes right away and error message pops up and it asks me to submit a report
View 8 Replies View RelatedUpstairs, I have a desktop and a laptop. They are connected to my wife's computer, downstairs, via wireless. Both my wife's downstairs computer and my laptop, upstairs, will connect to the internet just fine, but the desktop will not, even though it shows that there is a strong signal being received. I am running Windows XP Pro, version 2002, with SP2. The computer has an AMD Athlon chip. It used to be a Tiny computer, but after having a major meltdown, about two years ago, I took it to a repair shop, and they installed an ASRock I/O K7S41/K7S41GX motherboard, as well as a new power supply, so I don't really know what to call my computer, now. I guess it's just sort of a mongrel, Heinz 57 Variety.
I have tried using System Restore, but it won't allow me to restore to a former point, no matter how far back in time I go. I started it up in safe mode, then ran AVG, but no viruses were found. When I go to Control Panel, then "Network Connections," it shows that the wireless network is up and running. Even so, I tried repairing the network, by right-clicking on "Repair," but got the following message: "Windows could not finish repairing the problem, because the following action could not be completed: Failed to query TCP/IP settings of the connection. Cannot proceed. For assistance, contact the person who manages your network." Unfortunately, that person is me, who is totally clueless
I formatted my pc, and when I go to My Network Places->Add a network place or set up a home or small ofice network, nothing happens and I cannot connect to the internet.I dont see the internet icon on my tool bar
View 14 Replies View RelatedTrying to connect my uncles's pc to the 'net, with no success. pc config is as follows: windows xp home sp1
celeron 2.4ghz 224mb ram conexant soft 56k internal modem trying to connect to the 'net via tesco isp, device manager shows modem connected to com 3, only com3 dosen't show in the ports section of device manager. the problem is the modem tries to dial but then a box pops up with cant detect dial tone( phone line working correctly) the computer says the port is already in use(?). the modem fitted is the second one i've tried, with no success.
I'm dealing with the following issue:
- I can ping www.google.co.uk and recieve return with no packet loss
- I can use msn messenger
- I can ping my router and othr networked computers
- I cannot connect to web pages via IE7
- I cannot update AVG free - "connection to update server failed"
- The computer has been rebooted numerous times
- The internet is known to be working because I'm posting from it.
The computer runs Windows XP SP2 is connected by ethernet to the router. The windows firewall has been disabled.
I am going to have a comp with win xp pro and use this computer as a storage server where i am going to share the drives and folder so a few user can save and retrieve their files from there of course thr a network where the enviroments is still NT but this computerwill be runnin win xp pro , the questions are
1- having 2 nics on this comp will benefit the speed access to this computer from those users that will save there and retrieve files ?if so, can anyone explain in short what i am suppose to do(or any link that explain how to procced to do this? does each NIC from this computer should connect to a different switch or both nics should be connected to the same switch ?
I'm trying to connect my PC with Windows XP Pro. via RDC on the internet, the screen pops up with blue screen but it never refreshes for login screen to come. It's stays there while and then it will disconnect. But am able to login on my own network either LAN or WAN. Outside my network it never works, what should I do pls!
View 6 Replies View RelatedOk so we have a compaq that operates windows xp and a newer computer that operates vista. We are trying to connect a HP DesignJet 650c(c2859b)buy HP. This is IMPOSSIBLE! PLEASE help me.I have the driver on the compaq but it will not connect to the plotter which is connected to the vista. What do I do? How do I get it to fully connect and work with out unplugging the plotter?
We have 3 computers and have connected all 3 to a d-link router. The problem we are having is that only 2 comps will work online at one time. The other one gets an error message. Our system is windows xp and we have tried rearranging the cables but the problem stays the same.
