Wireless Network Connection / Correct The IP Address Manually
May 28, 2010
I have two computers and a printer in a wireless network both computers using XP.The master which is a Dell Dimension is operating correctly. The slave which is a Dell Inspiron laptop will not connect to the network correctly.Trying to repair the Wireless Network Connection in "Network Connections" results in a message cannot complete task of correcting IP address,Can I correct the IP adress manually or is there another solution?
I now cannot access my wireless network in the house. I have a Linksys WRT54G router. The Int, WLAN & Ethernet lights are on. When I get into the home internet connections "details" on my HP, it states "acquiring IP address" and list all 0 (zeros.)
XP has stopped connecting to my wireless connecter "Wireless Network Connection Not Connected" Device manager says everything is normal, and I can identify other local wireless networks. XP recognizes that the connector is there, but it won't hook up. I have disabled and reenabled the wireless connector and reloaded all of the Broadcom software. I tried to do an XP repair, but I am using SP3. The slipstream recovery disc that I made is asking for a password to get into XP, but there isn't any. I've verified this with three different password cracking programs. Everything else is working; I am on an Ethernet connection now.
how to force XP to connect or know what drivers I need to reload that are used to connect to the wireless connector besides the Broadcom's that I have already reloaded? I really don't want to do a complete XP reinstall.
I reinstalled windows xp sp3 on a old laptop. Everything went fine except for internet connectivity. I have a wireless network to which I connect several computers and devices and everything works like it should.When I try to connect my laptop to this network, it fails.Every 5 seconds it goes from not connected to acquiring network address.I am sure that the key is correct, I am sure that my router is belkin router is wireless G and so is the Ralink RT2500 card. I am also sure that I have not white listed MAC addresses so my laptop won't connect. Basically I have done every simple thing that perhaps could be causing the problem.
Is there anyway to enable your wireless network connection and disable it with the starting & stopping of your web browser (IE 6.0), Win XP Pro, service pack 2. I like my wireless connection to be disabled when I am not surfing the web. Can I automate this task some how?
I can connect to the internet, but I don't know when I get kicked off. The display on my taskbar always shows it is disconnected. When you pull up the screen is says " non connected" but it actually is, then about 15 mins later it kicks me off and I have to re connect manually. This is very time consuming and is a pest. I have tried restoring my registry to an eariler point and have checked for spyware and virus.
I am using a Toshiba Satellite Pro 6100 Laptop running Windows XP.I restarted the laptop, and was prompted to either start Windows normally or start uing last know best configuration-I chose to start with last known best configuration.Now when I go to Network Connections, there is no Wireless Network Connection Icon. However, when I go to Device Manager, the card is present under Network Adapters(Toshiba Wireless LAN Mini PCI Card), and it states it is working properly.How do I get the icon back into Network Connections, so I can use my wireless again?
In the Wireless Network Connection Properties box under the Wireless Networks tab, there is a checkbox available for "Use Windows to configure my wireless network settings." In the past this box was checked and stayed checked all the time even if I rebooted, restarted, etc.. Starting a few days ago whenever I reboot, startup, etc. by default this box is now always unchecked and I have to go in and recheck it each time.What's making this box uncheck itself and how do I get it to stay checked again?
I got my computer fixed See thread I am having another slight problem. I don't think that this problem was necessarily caused because of the others issues I have recently fixed because I have had this issue in the passed but it just seemed to fix itself. I have a HP zd7000us laptop with wireless capabilities. However I the system does not even show any wireless network available. My desktop in my house has no problems going online with the wireless, neither does my psp for that matter. It's like the computer doesn't even know it's there. I went to the hardware wizard on my system and it says the wireless card is working properly but it will not see any available wireless networks.
I have found in Group Policy that there is a policy called Turn off Microsoft Peer-to-Peer Networking Services and is located under Computer Configuration Administrative TemplatesNetworkMicrosoft Peer-to-Peer. I have enabled this policy and applied to a test Windows XP SP2 machine. I have found that on this test machine I can still create a new ad hoc wireless network. how I can prevent users from creating ad hoc networks? Or why this policy is not working the way that i thought it would?
I install windows xp, I was missing some drivers so i was able to get what i needed and my computer is running just fine but the wireless network connection is reading in Spanish. I've already gone to the regional settings and made sure it reads English, there is no other part of my computer that i have come across that reads in spanish except this section.
I have a local area connection icon when i go into network connections--it was automatically set up with the laptop, and there used to be another icon i could click on to activate and select between detectable wi-fi's. This icon has mysteriously gone missing, does anyone know how to get it back? I tried a wireless connection setup and it didn't work.
I have Win XP Media Center 2005 and have added my Outlook Express to the Start Programs Folder. However, when booting up, it attempts to open OE before opening my Wireless Network Connection and naturally, it can't do the OE Send & Receive when opening. Is there any way to regulate what order programs in the Start Programs are opened, i.e., to open the Wireless Network Connection first?
The Network Setup Wizard tells me that it found disconnected network hardware. My Broadcom 802.11g Network Adapter wireless connection is apparently disconnected. Any ideas on how to rectify this?
I took my daughters Gateway M320 laptop and did a restore from the CDs that came with the laptop. After doing all the Microsoft Updates, ALL the wireless driver installs from Gateway there is no 'Wireless Network Connection' icon. I have also checked Device Manager and there is no wireless adapter. Before this exercise she was running wireless fine. It does work 'hard wired' but no wireless icon.
Does anyone happen to know how to successfully create a network in Windows XP Pro for a wireless laptop and for an Ethernet-hooked-up (non-wireless) computer. I'm trying to printer and file share the two together BUT I've exhausted myself in trying to make it happen. Has anyone successfully done this? Am I missing something? Perhaps hardware?I would truly appreciate any help or advice.
i get one problem sorted with screwed up ram and another bites me. i think i'll either become a computer tech guy or gain a computer phobia. Ok, so my problem is this;
1. my wireless software and hardware seems to work fine but can't find my hub to gain access to. 2. It says that if i have used another program to access the connection use it. Although i have not.!! 3. I went into advanced settings and clicked use windows to access...didn't work. 4 I disabled and enabled the other settings to kick start my connection. . 5. however there is a connection and i do have data transfer but no connection. 6.i am still getting the same response, which is;
No ip address or any other information regarding my connection.
Dell Dimensions 4600 Windows XP SP1a. No local area connection because no IP address/cannot renew IP address. No network adapter. Running thru ethernet directly to modem with D-Link router hook up for wireless computer. Have internet access on wireless, but not on desktop.
I keep getting an error message that the network is unable allocate an ip address to my computer ive had this problem before in australia and some tech support guy fixed it for me but i cant remember what it was that he did
I keep getting the following pop-up error message: "window-system error- there is an IP address conflict with another system on the network". I don't really understand it, but I guess I should do something about it. Can anybody give me an idea? I saw in another, similar yet unresolved posting that the experts requested IP Config details. I was about to post those here, but am not very knowledgable about security. Before posting such data in a forum, is there anything that I should exclude in order to avoid the meddlesome entry of reprobates?
I've got 2 Identical computers...WinXP Pro SP2...and I'm trying to set up a wireless connection. Just got the router (Belkin F5D7230-4)set up downstairs and after alot of BS it's working fine, I've got the matching wireless PCI card upstairs and can't get any available network! As a matter of fact....I had a hell of a time installing the card...my MOBO just didn't want to recognize it! I'll break off here so anyone that's had a similar problem can reply.
My computer has recently started saying "acquiring network address" and has not been able to connect to the internet. My toolbar has also reverted to what looks like an older version. I run on xp and I have internet explorer 7. I have run virus scans and stuff already. I have also done some research, but most explanations for my problem are full of techno-lingo. However, I have tried running ipconfig but that hasn't worked. If anyone could offer some step by step instructions, I would greatly appreciate it. I'm not that good with computers but I know some stuff. Oh yeah my connection is wired (however you say 'not wireless').
I've been trying to use Remote Desktop to connect from my home computer to my office network's machines. I've followed all the instructions except for the part where it talks about getting a "virtual private network connection". Not sure if I have this part done right. Not even sure if this is the problem. Is there something that needs to be set up before being able to connect from a home computer to an office machine?
I have this one computer in my house that uses a Motorola wireless adapter to connect to an 802.11g network through a router. However, recently, the computer acted up. I reformatted it, and reinstalled the adapter software. However, i cannot access its control panel to configure any options. This i have no explanation for. I have no option to make windows use its own controls instead of the software's because i have no connection.
I've been getting a couple messages whenever i turn on my computer.The first one says "Generic Host Process for Win 32 Services encountered a problem and needs to close." This message seems to trigger two problems: (1) the sound is not working, and (2) the wireless connection does not work after my computer goes into hibernation--I have to do a complete reboot to get the internet back.The second message says "Anti-Spyware | Unexpected Problem was encountered. Error #: 0x80004003.I assume these messages are related but I'm not sure.
My wireless connection disconnects randomly, usually after about half an hour.I can still ping an outside website, like yahoo. But I can not use IE or firefox. I try the following but still would not restore the browsing: repair wireless connection, disconnect and re-connect wireless. The only way to get the connection back is by log off and on.
we're trying to do a wireless network with desktop. We've got the wireless part working, we can get to the internet from the laptop. But I can't figure out why it's not seeing the "workgroup" and the shared folders that we shared on the desktop. I turned on my own laptop and the shared folders just popped up without even trying, but on my mom's laptop, I can't see the workgroup at all. I had the printer installed at one time and it worked. But then I changed the name of the desktop computer, and then I deleted that printer and tried to re-do it, but it won't even see that there's anything under the workgroup. And then sometimes it won't even see that there IS a workgroup.
I was randomly cut off my wireless network.. Thought it could be a temporary problem so just slept it off, woke up again this morning and I've not been able to connect my laptop to the wireless network. I've even come down to the host computer and placed my laptop next to it, to see if the signal was any better.. and it is just non existant. I click on "wireless network connection" and refresh network list and it just "no wireless networks were found in range" and whenever I click refresh network list it just comes up with the same message straight away.. Not allowing it to search. I'm so worried it might be something to do with my laptop because I am going to uni next week, so NEED wireless when I am there.
I am trying to set up a home network. However after installing a Belkin F5D7000 Wireless Desktop Network Card I get the following error: PCI Simple Communications Controller Error.. Search For Drivers. I have the installation disk and I have tried manually pointing the Hardware Wizard to the file, but it will still not pick up the drivers. I have the latest drivers from Belkin - no joy.This is the second card I have tried and after installing into another computer it worked fine. However the machine I am trying to install onto is older. Pentium III 450 on a B7XAN Motherboard. O/S Windows xp pro.
I have two computers wireless connected. What I now want to do it set up a password so hacking into the system by outsiders is as difficult as possible. I think we are talking "network key" or "Wired equivalency Privacy Key". I know nothing about setting up a wireless connection so don't want to risk disturbing the existing set up which works fine; I just want to add password access.One computer has Windows XP Home and the other Vista Home Premium. Can anyone give me some not too technical advice that will help me do this please?
