Recently the following message is displayed after WinXP Pro SP3 boots:"One of the files containing the system's Registry data had to be recovered by use of a log or alternate copy. The recovery was successful.While the "The recovery was successful" is always in the message, occasionally some applications don't behave normally. A single restart cures this problem almost 100% of the time. Any clues what is happening?
View 2 RepliesI recently added a 300 GB external USB2 hard drive to serve as a backup and general storage repository. Before connecting the drive, the system was booted. Once connected, the drive functioned flawlessly. However, after system shutdown the next boot failed with "no boot disk found," which was easily traced to the external drive.
View 9 Replies View RelatedMy WinXP Pro SP2 P4 desktop takes a very long time to boot. The time seems to be spent in a routine MBA (Managed Boot Agent) V4.30, which is provided by LAN Works Technology Co. of 3M Corp. The process identified is a boot execution executive named PXE V2.20. Since there is no LAN present on which a boot file is located, the process completes with "No boot file found." The booting process proceeds with the OS file located on the C drive. Is there a way to safely eliminate the MBA step?
View 2 Replies View RelatedI am building a new desktop and plan to install WinXP Pro SP2. I have the Full WinXP Pro SP2 software. I would like to update this software with SP3 by slipstreaming. Are there any major caveats to slipstreaming in this manner?
View 2 Replies View RelatedMy wifes computer runs WinXP pro w/sp2, the computer boots up fine but when windows starts the winXP logo is all misconfigured, and it takes about 15 - 30 minutes for windows the completely start. The logo screen will look different each time windows is started. I will try to recreate the screen.This is a crude recreation of the display.I have gone as far as doing a complete format and clean install of WinXP and other programs. I still get the same thing! Could it be a faulty video card? (this one is integrated in MB). the MB is an ASUS A7N266.I will try using a spare video card to ruleout that possibility. If it is not a graphics issue what else? CPU, or MB. I saved many files to a USB drive I use for backups, is it possible for a boot sector virus to reside in the My Documents folder?I kept Norton AV, SpyBot SD, and AdAware upto date and tried to run scans frequently; however, these my not catch everything.
View 6 Replies View RelatedExcept for functions I hosed by changing settings, my year old Dell PC works and even sends e-mail and surfs. However, I must rebuild. I got the UBCD4WIN set, but have no way to build a CD. I have another computer but it is Win XP Home and doesn't have a CD burner.SO, my intention is to use the Reinstallation disk Dell supplied with my computer, and I'm wondering what to do to prepare for that. Our computers are connected to the internet via satellite. The XP Pro Home computer is primary, connected with a wired router. My machine I'm going to repair is then using a WIRELESS router.My question is whether or not I need to remove the wireless router before using the Reinstallation disk.
View 4 Replies View RelatedI was just wondering, is it possible to install 2 versions of XP Pro on one hard drive? This is because i have 2 versions of XP Pro, one in English and one in another language, so i was wondering if it would work. Also if it is possible, do i make separate partitions for each OS? If someone knows any good sites which is about this topic or has good tutorials of what i'm trying to do.
View 8 Replies View RelatedI'm having problems with a 3rd party app. on WinXP Pro SP3, and their support staff recommended that I install the latest version of the app. .NET FW 3.5 SP1 is a requirement for the new version. However, installation of this update has been unsuccessful. Would it be better if I uninstalled all of the current versions, then installed 3.5 followed by patch 3.5 SP1?
View 4 Replies View RelatedI have reviewed the following thread and discovered that the solution does not work on my WinXP Pro SP2 computer.Solved: XP shut down window Jag11 in post#3 of the thread and the original poster applied this fix which worked for the original poster, CactusJack: Control Panel>User Accounts Click Change the way users log on or off, tick the Use the Welcome screen, then click Apply Options.When I click on Start, there are only two buttons at the bottom: Log Off and Turn Off Computer, and no green icon for Restart. The green icon can be found when the Turn Off Computer icon is pressed and appears to the right of Stand by and Turn Off icons in the displayed window (Turn off computer) at the center of the screen.Is there a fix for this problem - i.e. how do I get the Restart icon back at the botton of the Start button display? Or, is this how WinXP Pro SP2 is normally, and not considered a problem?
View 1 Replies View RelatedInstead of getting the graphical splash screen with the blue dots moving from left to right across the screen before the user login screen presents, I am able to select Linux and boot up properly there. Each OS is on its own hard disk. I had earlier saved off each MBR in case I ever had a problem with it. I have checked the MBR for the WinXP disk (i.e. the 0th (1st) sector) on the disk consisting of 512 bytes. It checked out OK with no binary differences, so I am confident that there is no problem with the WinXP MBR or the partitions in it. Obviously there is a problem after control is transferred from the WinXP MBR to bootup WinXP.My strategy now is going to be to run the bootcfg /rebuild command from the Recovery Console after checking out the boot list from the bootcfg command - if I can get that far with the Recovery Console.I do not seem to be able to get into Safe Mode or the Advanced Options screen selection by pressing on the F8 key. My boot.ini file was edited OK and had an extra line to boot into Safe Mode, but that does not work now.
So, my theory is that if all was working as before OK, I should be getting the selection to boot into Safe Mode vs normal bootup with the changes I made to the boot.ini file. Since I am not getting that and experiencing the problem as described above, I am assuming that something is out-of-kilter with the boot.ini file.Also, my last shutdown in the morning yesterday went Ok. What I was doing before I shutdown for lunch was shredding files - everything went OK with no apparent problems, but I wonder whether something went adrift without being noticed and corrupted some files on my system - notably, the boot.ini file - at least this is what I suspect.Anyone see a problem with what I have in mind to do or have a better idea how to fix this problem?
I would like to know what background services I REALLY NEED and what services I have no use for. Can the forum members point me to a guide that can detail the services I can turn off in WINXP PRO SP2.
View 1 Replies View RelatedWhenever WinXP Pro SP2 is shutdown, the message "USRprbdA.exe - DLL initialization failed" is displayed. After waiting for a few seconds, the message goes away and Windows shuts down normally. Do you have any idea what's going on?
View 3 Replies View RelatedMy Toshiba laptop running WinXP Pro SP2 with NVIDIA GeForce 420 Go adapter has a 1'' black vertical bar on the right hand size of the desktop display. I have tried many settings on Display Properties window but have had no success in achieving a ''full' display. Many articles on WinXP Microsoft KB tells me how to configure multiple monitors but not how to get my primary monitor to work well. Toshiba's support site also offers no insight. Note that a full screen is displayed during boot and shutdown. I am running NVIDIA display driver. Any clues?
View 3 Replies View RelatedI know that I can unzip things with WinXP, but can I create a zipped file? I tried doing this with a large adobe acrobat file, and with a jpeg file, and although it SHOWED a new zip file, when I checked the size of the files, both of them were only five kb smaller than before. That's not much, I'm thinking, lol. What I did, was to right-click on the file and chose "send to" and then chose "compressed (zipped) file."
View 6 Replies View RelatedDownload the "Corp" version of Win XP Pro, file-sharing or torrent, and then run validation, fail, and get MS to sell you a retail copy of 1/2 price. Do the same thing, download Corp XP Pro. Burn a copy to CD on a computer it isn't install on, make up a receipt, and go to the Library and do a search of newspapers for computer shows from a couple years ago.Fill out the forms MS gives you and send in with the CD and receipt, and get MS to send you a retail copy for free. OK, I'm not really advocating anybody doing this, just trying to make a point. If someone is gonna pirate XP to begin with, what makes MS think that people won't be doing things like this? Why isn't retail XP sold at the price that is being offered to people with pirated Windows to begin with?
View 24 Replies View Related1) While I originally started with XP SP2, now I have a XP SP3 CD, with the SATA drivers successfully incorporated via nLite. SAME PROBLEM, even with the BIOS and XP Setup recognizing the HDDs on SATA ports instead of IDE channels.
2) I downloaded the Windows 7 Beta 64 bit, got thru the install to the point of "Updating Registry" and then the system lost power as with XP and did a soft restart.I am currently downloading to Ubuntu Linux to see if that also fails, at which point I definitely know I have a hardware issue. The question is: Which component? I am leaning towards PSU, with mobo in second. Please any insight from the pros would help.
1) I am unable to record data (mostly JPEGs) to a CD-R using WinXP Pro and my sony dru500ax DVD/CD recorder. I have in the past been able to do this with no problem using either the built in windows functionality nor Nero. Now I am unable to use either method and I don't know what has changed. Both methods get partially through the write process and fail (but nothing ends up being written on the CD).
2) I am unable to read CDs that were burned by my father on his computer. The disks clearly have stuff on them and I've been able to get to the content on other machines (at work, at friends, WinXP, Win2K3, etc) But when I put them in my drive and open the drive in explorer it shows that nothing is written on the CD
After automatic update installed updates at shutdown, my WinXP Pro SP2 laptop now boots only in Safe Mode. In this mode, I am able to copy files from C drive to USB connected backup drive. Hence, my files of interest are saved. Nothing I have tried seems to allow me to boot in normal mode.
View 2 Replies View RelatedI get the blue screen of death at startup on Windows XP Pro with this message: 0x0000007E (0xC0000005, 0xB9B6C174, 0xBA51ED44, 0xBA51ED40) I am unable to get into safe mode, and get an error when trying to boot to Windows XP disk.
View 9 Replies View RelatedI need the name of the .inf file that the hardware wizard needs to install this webcam. The Logitech QuickCam Zoom v.8.4.6 software installs but the hardware wizard says that a required inf file cannot be found. I spoke with Logitech support and they had me uninstall the software using Add/Remove, then delete Logitech folders, and edit the registry to remove all references to Vid_046, then perform a clean boot. Reinstalled the software, when it said to restart, I clicked no, then changed msconfig back to normal startup, then rebooted. Upon reboot, I get the Logitech splash screen saying to connect camera to pc. When I do, the hardware wizard starts but gives the error that the .inf file cannot be found and the Logitech screen says that no camera was connected. (Should I have rebooted, connected camera, then changed msconfig back to normal startup?) I ran services.msc and find that Human Interface Device Access is Disabled. Could this be keeping the system from finding the..inf file?
View 2 Replies View RelatedVolume Licensed WinXP Pro is obviously the official name as has been pointed out ad nauseum. "Corporate Edition" doesn't exist (allegedly, actually I personally don't care if it exists or not), is seemingly subject to more demands for proof of existence than God himself and of couse the term "Corporate" means its a pirated version of the said Volume Licensed WinXP Pro which has also been screamed about like its in the bloody constitution or something. I call Volume Licensed WinXP Pro "Corporate" because its easier to say and write for that matter than "Volume Licensed WinXP Pro". Thats it it, just works better nothing more.
In all the time XP has been on release and I have been working with it in the industry I have never yet heard anybody at all refer to "Volume Licensed WinXP Pro" or anything remotely similar; they all from IT managers to shop floor builders call it "Corporate" or similar....
I am unable to boot my PC most of the times.Whenever I switch on my PC,I see the following message nine ot of ten times. DiskError/Boot Faliure Reboot and select proper boot device or insert Boot media in selected boot device If I press enter after this messages & keep pressing following messages appear from time to time (Not simultaneously). If just after making the switch on, I press F2 key to check the boot device preference
If just after making the switch on , I press f11 key to reach the boot menu I always find the 1.44 MB Floppy option highlighted as the booting choice.(though there had not been any floppy in the floppy drive, I dont have any really)I make the hard disk option highlighted & it solves the problem only a few times. But next time when I try F11 key to check the boot menu again I find 1.44 MB floppy highlighted.
I haven't installed anything new on my computer but today after having my computer shipped to me via UPS I cut on my computer and where the XP load bar screen was I got: "reboot and select proper boot device or insert boot media in selected boot device".Seeing this I knew I went into the BIOS setup and tried to turn the system priority to look at the HDD. Instead I only had the option of the DVD drive and the CD drive.I have no idea how to solve this problem and don't have any of the recovery CD's. I DO NOT WANT TO REFORMAT because like a bad little boy I did not backup my 4 years worth of work.
View 9 Replies View Relatedfirst i get the HP blue screen. I tried F1, but i dont see my hard drive in the boot menu. I followed some steps in Hp's web site- took the cpu apart and unplugged both hard drives from the motherboard, plugged them back in. when i restarted ,i got the HP screen and then windows started to load up. After a few seconds the HP screen came back up and then the black screen: sk boot failure, insert system disk and press enter. I also noticed that pressing F10 for system recovery does nothing.
View 3 Replies View RelatedHow can I Reboot and select proper boot device or insert boot media wnidows xp without cd.It is possible.
View 1 Replies View RelatedI Installed a 2nd HD and cloned my first HD to it as a backup and would like to be able to dual boot. This is XP Pro. I would like to know what numbers to use in multi, disk, and rdisk.
View 3 Replies View RelatedI have a Windows XP Professional Edition and i incurred a spyware virus on my PC, so i made a dumb decision by running MSCONFIG and changing my SAFEBOOT option, I did this because previously I couldn't even get into Safe Mode, it would load the files on the screen.
View 1 Replies View RelatedI accidentally deleted a partition and later found out that my system is dead....The only way I recover out of that is I reinstall Windows and then install grub again to recover the Linux partition. But I feel the delete partition is a very rapid process just taking seconds and in that I don't think files would be deleted, so I feel potentially I can recover the deleted partitions including the boot partition. But I don't know how to do it. Also now when the boot partition is deleted and the system is not booting up what should be done to recover the system and data?
View 5 Replies View RelatedRecently I was playing a game when my computer froze up, when I restarted it, it froze every time on the Windows XP bootscreen. It boots fine in Safe mode with networking. (I'm typing this post on this computer)
View 2 Replies View RelatedI have a dual boot system (2 hard drives) booting Suse and XP and boot up through Suse's built in boot manager which gives me the option of booting to Windows or Linux. But since I barely ever use Linux I want to delete it off the 2nd drive so I can use it for a storage drive, so I'm wondering how to replace the Windows Master Boot Record so I can just boot into my XP drive. I'm scared that once I delete/reformat the contents of the 2nd hard drive (I'll probably use Partition Magic to do this through my XP drive) that I won't be able to boot XP up anymore. So before I do anything I want to just be able to boot into XP and bypass the linux drive before I delete it to make sure everything is ok.
View 2 Replies View RelatedI"m running WinXP SP2 Home. Hardware is 2.0 Celeron, 1 gig Ram, 64MB Nvidia Video Card, PS/2 keyboard and mouse, HD's are 250GIG Western Digital with 4 partitions and 27% free on the XP Boot and 200GIG Western Digital with 2 Partitions. I have a Lite-On DVD +-R/RW drive and a 3.5 floppy. I am setup with a Duel-Boot configuration Win 98/XP. I do not have a paging file.
My problem occures after I hit enter for the Select Operating System page. I Hit enter, Win XP proceeds to load. After I hit enter and Windows loads the blue welcome screen 1 minute has passed. I hear the Welcome Audio music, however blue welcome screen is still there for 30 more seconds. Next is my picture that I have as my background that is shown without icons for 1minute 21seconds. Windows now displays my icons on my desktop. the icons blink at minute 4. after 4 minutes and 51 seconds I am able to use my computer. At bootup I only have 43 programs running and 357MB of the 1 gig ram taken.
What I have done:
1) I have started in safe mode and defraged my PC, 0% frag on all partitions except a drive that isn't currently plugged in and it was 1% because it's my backup drive (not worried about that 1%)
2)Removing all connected Componets and rebooted, same problem.
3) I have tried using msconfig.exe and setting the startup selection as Normal- it's defaulted to Selective. Tried reducing my startup programs. ....