I recently added a 300 GB external USB2 hard drive to serve as a backup and general storage repository. Before connecting the drive, the system was booted. Once connected, the drive functioned flawlessly. However, after system shutdown the next boot failed with "no boot disk found," which was easily traced to the external drive.
View 9 Replies
Recently the following message is displayed after WinXP Pro SP3 boots:"One of the files containing the system's Registry data had to be recovered by use of a log or alternate copy. The recovery was successful.While the "The recovery was successful" is always in the message, occasionally some applications don't behave normally. A single restart cures this problem almost 100% of the time. Any clues what is happening?
View 2 Replies View RelatedI have a HP ze5568cl laptop (Windows XP SP2). For a few years we've had trouble with the power connector. We've just wiggled the power cable to keep it connected and lived with the problem. It also gets very hot and the fan runs constantly. Yesterday when I powered it on there was no power, absolutely nothing. My husband has some electronic knowledge so we took the laptop apart and he soldered the loose part of the power connector. While he was doing that I cleaned the fan (couldn't believe how much dust was in there.When we plugged in the power cable the orange light came on so we were excited. When we powered it on all the keyboard lights lit up so we thought we had fixed the problem but.that's all it did. It went no further except that the fan kicked on.There is a clicking noise coming from the cd drive about every second with the green light flashing. I suppose it is checking to see if there is a bootable cd in the cd drive. I have attempted to change the boot order by holding F1, then F2 but it still continues to try to read the cd drive. I can't get to the screen that will allow me to change the boot order.
I also put the OS disk in the cd drive, hoping that it would start with the disk but it just clicks. Hubby removed the cover of the cd drive and I could see that the cd is spinning.There were no problems with this laptop prior to the power problem. It was really working very well especially considering the age of it.
The information in my sig is not for the computer with the problem. It's actually for an old computer which my son now has at college.
My WinXP Pro SP2 P4 desktop takes a very long time to boot. The time seems to be spent in a routine MBA (Managed Boot Agent) V4.30, which is provided by LAN Works Technology Co. of 3M Corp. The process identified is a boot execution executive named PXE V2.20. Since there is no LAN present on which a boot file is located, the process completes with "No boot file found." The booting process proceeds with the OS file located on the C drive. Is there a way to safely eliminate the MBA step?
View 2 Replies View RelatedIs there anyway to see the BIOS boot order (1st CD, 2nd Floppy, 3rd HDD) through windows XP (possibly a registry key or something)? I ask because I need to make sure all of the computers in my department are set to HDD first and not CD incase they have a non-bootable CD in the drive and a power outage (or Windows Update) causes a reboot.don't want to goto every computer, and would like to do this all remotely.
View 2 Replies View RelatedJust wondering?? Is there a way to set the order in which items start when I start my computer. The items in the notification tray are what I am talking about. Is it possable to get things to pop into that area in a different order?
View 6 Replies View Relatedfitted a new hard drive due to virus and want to reinstall windows but went into bios to change boot order but it wont let me it has enter in red alongside all i can do is press it it wont let me go anywhere else.
View 7 Replies View RelatedBefore my latest power supply, when my computer booted, it would show the Welcome screen, then play the boot-up sound, then load the desktop. Now there is no boot sound cue until after the desktop loads. Is this something to be concerned about?
View 1 Replies View RelatedI am receiving the error message about missing or corrupt file and have seen many "fixes" posted on the web. But my trouble is a little different. I have the XP install DVD and when I put it in the computer and start it up it doesn't do anything different, i have tried to change the boot setup (F12 i think upon startup) and try to prioritize it to the number one spot, but it doesn't save the change (although it does look like the drive light is on during startup. I can't boot it up in Safe Mode or any of the options that appear on that screen. Everything I try takes me back to the black screen that says something along the lines of insert the original install disk and press R to go to the restore menu. I cant' get the thing to boot from the DVD. To note - on the screen where you can change the boot order, it doesn't say DVD drive it says CD but the drive came with the computer.
View 1 Replies View RelatedWhat happened was recently my computer restarted out of nowhere when I was browsing the internet. When my computer restarted, it would not go past the windows loading screen and just reset (blue screen of death). I tried going into safe mode however, nothing seems to work other than booting Windows into 'debugging mode' and everything works fine.I'm trying to correct this problem by possibly using the Windows XP CD to repair Windows. Here's when I run into another problem. The Windows XP CD simply will not boot. I've tried changing the boot order in the bios but the 'press <any> key to boot from CD' will always be skipped no matter what. I've even tried different DVD/CD drives and different Windows XP CDs.
View 1 Replies View RelatedI am building a new desktop and plan to install WinXP Pro SP2. I have the Full WinXP Pro SP2 software. I would like to update this software with SP3 by slipstreaming. Are there any major caveats to slipstreaming in this manner?
View 2 Replies View RelatedMy wifes computer runs WinXP pro w/sp2, the computer boots up fine but when windows starts the winXP logo is all misconfigured, and it takes about 15 - 30 minutes for windows the completely start. The logo screen will look different each time windows is started. I will try to recreate the screen.This is a crude recreation of the display.I have gone as far as doing a complete format and clean install of WinXP and other programs. I still get the same thing! Could it be a faulty video card? (this one is integrated in MB). the MB is an ASUS A7N266.I will try using a spare video card to ruleout that possibility. If it is not a graphics issue what else? CPU, or MB. I saved many files to a USB drive I use for backups, is it possible for a boot sector virus to reside in the My Documents folder?I kept Norton AV, SpyBot SD, and AdAware upto date and tried to run scans frequently; however, these my not catch everything.
View 6 Replies View RelatedExcept for functions I hosed by changing settings, my year old Dell PC works and even sends e-mail and surfs. However, I must rebuild. I got the UBCD4WIN set, but have no way to build a CD. I have another computer but it is Win XP Home and doesn't have a CD burner.SO, my intention is to use the Reinstallation disk Dell supplied with my computer, and I'm wondering what to do to prepare for that. Our computers are connected to the internet via satellite. The XP Pro Home computer is primary, connected with a wired router. My machine I'm going to repair is then using a WIRELESS router.My question is whether or not I need to remove the wireless router before using the Reinstallation disk.
View 4 Replies View RelatedI was just wondering, is it possible to install 2 versions of XP Pro on one hard drive? This is because i have 2 versions of XP Pro, one in English and one in another language, so i was wondering if it would work. Also if it is possible, do i make separate partitions for each OS? If someone knows any good sites which is about this topic or has good tutorials of what i'm trying to do.
View 8 Replies View RelatedI'm having problems with a 3rd party app. on WinXP Pro SP3, and their support staff recommended that I install the latest version of the app. .NET FW 3.5 SP1 is a requirement for the new version. However, installation of this update has been unsuccessful. Would it be better if I uninstalled all of the current versions, then installed 3.5 followed by patch 3.5 SP1?
View 4 Replies View RelatedI have reviewed the following thread and discovered that the solution does not work on my WinXP Pro SP2 computer.Solved: XP shut down window Jag11 in post#3 of the thread and the original poster applied this fix which worked for the original poster, CactusJack: Control Panel>User Accounts Click Change the way users log on or off, tick the Use the Welcome screen, then click Apply Options.When I click on Start, there are only two buttons at the bottom: Log Off and Turn Off Computer, and no green icon for Restart. The green icon can be found when the Turn Off Computer icon is pressed and appears to the right of Stand by and Turn Off icons in the displayed window (Turn off computer) at the center of the screen.Is there a fix for this problem - i.e. how do I get the Restart icon back at the botton of the Start button display? Or, is this how WinXP Pro SP2 is normally, and not considered a problem?
View 1 Replies View RelatedInstead of getting the graphical splash screen with the blue dots moving from left to right across the screen before the user login screen presents, I am able to select Linux and boot up properly there. Each OS is on its own hard disk. I had earlier saved off each MBR in case I ever had a problem with it. I have checked the MBR for the WinXP disk (i.e. the 0th (1st) sector) on the disk consisting of 512 bytes. It checked out OK with no binary differences, so I am confident that there is no problem with the WinXP MBR or the partitions in it. Obviously there is a problem after control is transferred from the WinXP MBR to bootup WinXP.My strategy now is going to be to run the bootcfg /rebuild command from the Recovery Console after checking out the boot list from the bootcfg command - if I can get that far with the Recovery Console.I do not seem to be able to get into Safe Mode or the Advanced Options screen selection by pressing on the F8 key. My boot.ini file was edited OK and had an extra line to boot into Safe Mode, but that does not work now.
So, my theory is that if all was working as before OK, I should be getting the selection to boot into Safe Mode vs normal bootup with the changes I made to the boot.ini file. Since I am not getting that and experiencing the problem as described above, I am assuming that something is out-of-kilter with the boot.ini file.Also, my last shutdown in the morning yesterday went Ok. What I was doing before I shutdown for lunch was shredding files - everything went OK with no apparent problems, but I wonder whether something went adrift without being noticed and corrupted some files on my system - notably, the boot.ini file - at least this is what I suspect.Anyone see a problem with what I have in mind to do or have a better idea how to fix this problem?
I would like to know what background services I REALLY NEED and what services I have no use for. Can the forum members point me to a guide that can detail the services I can turn off in WINXP PRO SP2.
View 1 Replies View RelatedWhenever WinXP Pro SP2 is shutdown, the message "USRprbdA.exe - DLL initialization failed" is displayed. After waiting for a few seconds, the message goes away and Windows shuts down normally. Do you have any idea what's going on?
View 3 Replies View RelatedMy Toshiba laptop running WinXP Pro SP2 with NVIDIA GeForce 420 Go adapter has a 1'' black vertical bar on the right hand size of the desktop display. I have tried many settings on Display Properties window but have had no success in achieving a ''full' display. Many articles on WinXP Microsoft KB tells me how to configure multiple monitors but not how to get my primary monitor to work well. Toshiba's support site also offers no insight. Note that a full screen is displayed during boot and shutdown. I am running NVIDIA display driver. Any clues?
View 3 Replies View RelatedI know that I can unzip things with WinXP, but can I create a zipped file? I tried doing this with a large adobe acrobat file, and with a jpeg file, and although it SHOWED a new zip file, when I checked the size of the files, both of them were only five kb smaller than before. That's not much, I'm thinking, lol. What I did, was to right-click on the file and chose "send to" and then chose "compressed (zipped) file."
View 6 Replies View RelatedDownload the "Corp" version of Win XP Pro, file-sharing or torrent, and then run validation, fail, and get MS to sell you a retail copy of 1/2 price. Do the same thing, download Corp XP Pro. Burn a copy to CD on a computer it isn't install on, make up a receipt, and go to the Library and do a search of newspapers for computer shows from a couple years ago.Fill out the forms MS gives you and send in with the CD and receipt, and get MS to send you a retail copy for free. OK, I'm not really advocating anybody doing this, just trying to make a point. If someone is gonna pirate XP to begin with, what makes MS think that people won't be doing things like this? Why isn't retail XP sold at the price that is being offered to people with pirated Windows to begin with?
View 24 Replies View Related1) While I originally started with XP SP2, now I have a XP SP3 CD, with the SATA drivers successfully incorporated via nLite. SAME PROBLEM, even with the BIOS and XP Setup recognizing the HDDs on SATA ports instead of IDE channels.
2) I downloaded the Windows 7 Beta 64 bit, got thru the install to the point of "Updating Registry" and then the system lost power as with XP and did a soft restart.I am currently downloading to Ubuntu Linux to see if that also fails, at which point I definitely know I have a hardware issue. The question is: Which component? I am leaning towards PSU, with mobo in second. Please any insight from the pros would help.
1) I am unable to record data (mostly JPEGs) to a CD-R using WinXP Pro and my sony dru500ax DVD/CD recorder. I have in the past been able to do this with no problem using either the built in windows functionality nor Nero. Now I am unable to use either method and I don't know what has changed. Both methods get partially through the write process and fail (but nothing ends up being written on the CD).
2) I am unable to read CDs that were burned by my father on his computer. The disks clearly have stuff on them and I've been able to get to the content on other machines (at work, at friends, WinXP, Win2K3, etc) But when I put them in my drive and open the drive in explorer it shows that nothing is written on the CD
After automatic update installed updates at shutdown, my WinXP Pro SP2 laptop now boots only in Safe Mode. In this mode, I am able to copy files from C drive to USB connected backup drive. Hence, my files of interest are saved. Nothing I have tried seems to allow me to boot in normal mode.
View 2 Replies View RelatedI get the blue screen of death at startup on Windows XP Pro with this message: 0x0000007E (0xC0000005, 0xB9B6C174, 0xBA51ED44, 0xBA51ED40) I am unable to get into safe mode, and get an error when trying to boot to Windows XP disk.
View 9 Replies View RelatedI need the name of the .inf file that the hardware wizard needs to install this webcam. The Logitech QuickCam Zoom v.8.4.6 software installs but the hardware wizard says that a required inf file cannot be found. I spoke with Logitech support and they had me uninstall the software using Add/Remove, then delete Logitech folders, and edit the registry to remove all references to Vid_046, then perform a clean boot. Reinstalled the software, when it said to restart, I clicked no, then changed msconfig back to normal startup, then rebooted. Upon reboot, I get the Logitech splash screen saying to connect camera to pc. When I do, the hardware wizard starts but gives the error that the .inf file cannot be found and the Logitech screen says that no camera was connected. (Should I have rebooted, connected camera, then changed msconfig back to normal startup?) I ran services.msc and find that Human Interface Device Access is Disabled. Could this be keeping the system from finding the..inf file?
View 2 Replies View RelatedVolume Licensed WinXP Pro is obviously the official name as has been pointed out ad nauseum. "Corporate Edition" doesn't exist (allegedly, actually I personally don't care if it exists or not), is seemingly subject to more demands for proof of existence than God himself and of couse the term "Corporate" means its a pirated version of the said Volume Licensed WinXP Pro which has also been screamed about like its in the bloody constitution or something. I call Volume Licensed WinXP Pro "Corporate" because its easier to say and write for that matter than "Volume Licensed WinXP Pro". Thats it it, just works better nothing more.
In all the time XP has been on release and I have been working with it in the industry I have never yet heard anybody at all refer to "Volume Licensed WinXP Pro" or anything remotely similar; they all from IT managers to shop floor builders call it "Corporate" or similar....
What are the order of Windows Operating Systems after 98SE?
View 3 Replies View RelatedOn my old coputer I could print documents so they came out with the first page on top. I ca not find how to make that happen on my new computer with XP.
View 4 Replies View RelatedCan any one let me know how to change the Name Resolution order in Windows NT4 please?
View 1 Replies View Related
