After automatic update installed updates at shutdown, my WinXP Pro SP2 laptop now boots only in Safe Mode. In this mode, I am able to copy files from C drive to USB connected backup drive. Hence, my files of interest are saved. Nothing I have tried seems to allow me to boot in normal mode.
View 2 RepliesI can't get WinXP to boot in normal everyday run of the mill windows.it'll start in safe mode/s.m.with networking/etc etc.When it goes to start it'll get to point and then "blue screen of death" will appear for a split second then it'll reboot.i had this problem previously and fixed it(virus!) but i have run everything i can think of Norton/Ad-Aware/etc etc and everything comes up clean.I've checked a few things out from reading other posts(i.e. msconfig stuff) but nothing seems to work.
View 13 Replies View RelatedHusband upgraded my puter yesterday. New mother board graphics card (VGA Asus more/new ram and new processor and a CPU. Will only boot up in safemode or safemode with networking. As it boots up a screen pops up that "appears" to be telling me why, but it goes off so quick I can't read it. Is there a way to freeze that screen so it can be read? Surely there's some kind of "log in log" that tells you this somewhere in XP?? After booting up for the 1st time we had 2 question marks in the device mgr and we finally got it so there are none. But still it will only boot up in safe mode. We're thinking that boot up screen will tell us what the problem is.
View 2 Replies View RelatedMy XP Pro box will not boot in Normal mode. The XP screen appears with the little timing bar active, then the screen goes black, I hear a brief chatter of the disk, and then nothing. No bootup sound and no further noise from the disk.After a forced reboot, the various options appear and I can get to Safe Mode.CHKDSK finds no errors.A system restore results in the same hang.(and after returning to safe mode, it indicates that the restore was successful).The ONLY thing that I remember doing before this happened was to set my Power Settings to Desktop, which only has Turn off Monitor afer 10 minutes. I went out for a while and when I returned, the screen would not return. IE it stayed black.
View 9 Replies View RelatedI am trying to clean up my hard-drive, and want to run my virus-scan program as well as ad-ware/spyware programs in the safe mode. My computer will bootup fine in normal mode, but will not bootup in any safe mode. It starts loading lines of sys files and stops at mup.sys pauses for about 3 seconds and reboots. It doesn't matter if I try safe mode, safe mode with network, or safe mode with command prompt. Any ideas how to get it to boot to safe mode? I have a new (P9MS)motherboard with a p4 2.8gig cpu 512 meg ram, GForce fx5200 video card, seagate 80 gig 7200 rpm drive.
View 18 Replies View RelatedI've been working on my father's computer (an HP pavillion zv5000), and realized that he had some Windows XP updates to be installed, so I decided to download them. What I didn't realize at the time was that he hadn't installed any updates in almost 2 years (though Automatic Updates appear to be enabled). When I rebooted after the installations were complete, I could not start in Normal Mode. When starting normally, I get a black screen with white writing saying that there's been a problem with the computer (can't remember word-for-word), and gives me the option to start in safe mode, safe mode with networking, and another safe mode. It also offers to start up with the last settings that worked, or normal mode. When I try to boot up in normal mode, it sends me back to that same screen, and likewise when I try to boot with the last settings. Now it only works in Safe Mode. I'm not really sure what's happened, and if it's related to the updates or if it could be a virus.
I can't get Updates to XP SP2 and in the process of trying to do so, I'm instructed to reboot, continuing to press F8, and get into "Safe Mode". When I do that, I'm not given an option to get into Safe Mode but am given an option on which of three devices to boot.How can I get to Safe Mode?
View 7 Replies View RelatedI have windows xp and all previous service packs have been installed thru automatic update. However when trying to install SP 3 using windows update it fails to install. I have then gone to the Microsoft website and downloaded SP3 and tried to load it from my desktop. It will go thru the installation and when it gets to the finish stage it seems to stall. I have left it run for over 1 hour with out it finishing, I have both tried to shut down andnormally and also hold the on button to turn the computer off. Windows will then only start in the safe mode. In the safe mode I can go back to a previous date and restore settings and re-start in the normal mode.
View 10 Replies View RelatedI've been trying to install Windows XP service pack 2 and I'm having no luck at all.I consistently have this message pop up everytime I try to install: Service Pack 2 Setup Error Service Pack 2 Setup could not backup registry key HKLMSoftwareMicrosoftWindowsCurrentVersionUninstallQ282010 to file C:WINDOWS$Nt ServicePackUninstall$ eg01617. 5: Access is denied.
View 5 Replies View RelatedWhen I install my BT Broadband PCI card (the one with an aerial sticking out the back), it crashes my system.Which is understandable because after a new install XP (recovery disk) on new hard drive, I am running on XP SP1 - and XP doesn't understand this new card. But should it crash in Safe Mode?If not, do you think this might indicate the motherboard is at fault?
View 1 Replies View Relatedthis is the best way I know to explain all of this. I am running a 3 yr old Gateway with Windows xp and Sp 1 & 2. I have always stayed up to date with my Windows updates deleting cookies, defrags and so on. I am running Avast anti virus and Armor 2 Net firewall. I have noticed over a period of about a mth that my system has been getting pretty slow to boot up and load up web pages. Now I am having to manually start my PC and I have to do it in safe mode F8 and click on debugging mode. If I don't do it this way then everything loads up and then my PC just turns itself off. I have PC doctor and I have done a complete diagnostic test and I have gone to antivirus.com and did a virus scan there as well as with my Avast. I am thinking that I may have to totally take everything out and reinstall everything back in. The only thing is -is that I don't know what to type in to get the whole thing going. Also I have been getting a message but only sometimes that says RTL cannot locate HPOIPMO7.exe (HPOIMO7.exe) I haven't a clue what this is. Might it have anything to do with what is going on. I don't mean to write a book here but there is one other thing, the other day I had a window pop up that said that windows needed me to reinstall my xp software and when I tried it said that the version that I was already running was newer than the cd software I was trying to install and wouldn't accept it.
View 7 Replies View Relatedcomputer was in blue screen. Unplugged and rebooted. Hung at Starting Windows. Unplugged again and rebooted. Selected user and continued on. Hung after desktop image was downloaded and normal desktop was presented. If I moved the cursor to the task bar, got hour glass. Could not get task manager to appear and could not start any program.Booted in safe mode with networking.
View 5 Replies View Relatedwe cant change the display depth below 16bit. we can only see windows in safe mode it just shows a garbled screen in normal mode
View 2 Replies View Relatedbut i think i posted this in the other area before. i had some bugs i couldn't delete in normal mode, so im like oh kay, easy, go in safe and delete the suckers. i restart my computer and f8, and try to go into safe mode, said something about your computer was shut down incorrectly or power lost and some files are missing now.
so im like, ummmmmmmmmmm... how do i get round this. so, i restarted my computer and put it in to the (Last Known Good Configuration), i know, i went to Run>msconfig>Boot.ini>tick /SAFEBOOT and restart my computer, not knowing this was one of the biggest mistakes i've ever done. it starts and it runs a little big and boooom!!! blue screen pops up and this is what it says, "a problem has been detected and windows has been shut down to prevent damange to your computer....
An infinite loop it seems. i was trying to start my pc in safe mode, to delete a .exe file from C:WindowsSystem32 which was suggested by a post to fix the "windows not genuine problem". To be able to do that, i ran msconfig and selected /safeboot under BOOT.INI tab. now everytime i try to reboot my pc it asks me to select an operating system (windows xp pro/microsft windows) if i select windows xp then it asks me to select a startup mode (safe/normal/last successful) and then no matter what i select it will reboot it self, and do the same again. If i select microsoft windows (instead of xp) then it shows MS Windows 98 screen and then goes into DOS prompt. from what i have read in some of the threads is that, i have a virus which is preventing my pc to boot in to safe mode, and because i have selected /safeboot from msconfig windows will only boot in safe mode, meaning i am stuck. the workaround these threads were suggesting was to find the boot.ini file and rename it to something else, which would fix the problem, because this file holds the info about in which mode your pc should boot. i tried to rename this file from command prompt (i cant get into windows, thats why), using "ren c:oot.ini boot.ini" but it says file name invalid. i think this is because its a hidden file. then i tried "attrib -h boot.ini", but it says attrib cannot be used in DOS mode.
View 10 Replies View RelatedI went into MSCONFIG and checked the box to go into safe mode so i could run some virus scans and adware scans and stuff like that. Now when it gets to the desktop it has the window that says Loading Windows and then after like 2-3 min. it says password is incorrect and that i should retype it and becarefull of caps lock and stuff like that. The thing is don't have a password. It does this when i boot normally too but it lets me hit ok and hit Cancel without a password entered.
All of a sudden it tries logging me in automatically when I start up but the thing is i dont need to log in. So I try to go back into normal mode and Ican't. I hit F8 during startup and went to the Boot Normally option but it still does to safe mode. What do I do? How do I log on or how do I get rid of this password thing? One more thing, the window that tells me the password is wrong has an OK box but theres no mouse on the screen for me to click it and I can't use the keyboard to select it.
I've got a problem booting Windows XP in safe mode though it works wll in normal mode. I press on f8 at the begining, I do get the menu where I chose the option "safe mode" and then it seems to boot up but after a few seconds all I get is a black screnn and a blinking cursor on the top left (this lasts for more then 15 mins when I get fed up and try again) What can I do?
View 1 Replies View RelatedI am working on a computer now that is failing to get online in normal mode. It can get online in safe mode.
View 8 Replies View RelatedI've got a Dell Dimension 4550 running windows XP w/ SP2 and ALL the latest patches here in my shop, and I've got the weirdest problem. I wanna sweep it clean of viruses and spyware, but can't boot to safe mode. It boots completely fine in normal mode, no errors or anything. The BSOD I get is: DRIVER_IRQL_NOT _LESS_OR_EQUAL 0x000000D1 (0x00000000, 0x00000002, 0x00000000, 0x00000000)
View 2 Replies View RelatedHello everyone , i have read a lot of posts about slow pc in normal mode but i cant find any help. My PC Starts up very slow... WinRAR , Winamp .. starts also slow , for example i download a file which is rared. i press Open and then it stop responding for awhile
View 3 Replies View RelatedI went into bios and disabled the search for the A: drive , because i couldn't care less. then it brought me to the screen to choose to open in safe mode, normally, or from the last point where windows worked well. problem : i can not use my keyboard in this setting, it works in bios, but i cant choose to load from the last working point of the OS.
View 4 Replies View RelatedWent into msconfig and set up safe boot on restart.PC will not load in safe mode or in normal mode it just keeps looping back to the same screen.I have tried all the options on the screen.Is their anyway to get back to msconfig.I have the XP setup disk.
View 11 Replies View RelatedRan smitfraud and rebooted but my computer keeps freezing both in safe mode and normal. I tried last good configuration but the same thing happened. Either just a black screen with the mouse icon or frozen on the long list.
View 14 Replies View RelatedThat is my simple question...How it was name safe mode? is it really safe?what happens during safe mode as compared to normal mode and all of the experts suggest to do these(scanning, running, etc) in the safe mode?can files be affected in this mode?
View 14 Replies View RelatedComputer restarts before login screen unless I interupt boot to choose debugging mode (or set it using msconfig). I've disabled everything in msconfig with no change. I've removed all hardward except the minimum. No change. The error I get if I prevent auto restart during boot is a "Multiple_IRP_Complete_Requests) error. This problem started without anything being installed or removed. If I go in to the BIOS and disable ANY devices (i.e. sound), then the Debugging mode trick to get the computer started doesn't work which seems backwards.
View 5 Replies View RelatedI have a dual boot linux/xp system.I was looking at partitions - just listing them - in linux, and now win xp won't come up in normal mode. It will come up in safe mode, however. Can you help me get my "normal mode" back?When the horizontal moving bar comes up in normal mode, it just goes on forever. I see the disk light go on for about 8 cycles of the bar. It usually runs 11 cycles before giving me the user selection screen. Now the disk light goes out after cycle 8, and the bar keeps going. I waited 32 cycles before giving up.
View 1 Replies View RelatedI can boot up in safe mode, but it's frozen up a couple times, over about 20 hours of usage, and I've had to restart.I've tried running adaware, windows defender, housecall, kaspersky online scanner. They came up with 4-5 items but it didn't fix the problem.
On System Configuration utility (start<run<"type" msconfig) on boot ini tab I selected Safe mode & Minimal (Alternateshell) & restarted. Then On the screen I see only a dos prompt window, CMD.exe. No graphical window. No start menu or other destop icons.Restart & try with F8 key, other F keys...... no use. Then I repaired with the win xp cd. The problem going more worst than before. The machine display a message "Windows xp setup cannot run under safemode . Setup will restart now". Either I close it or OK it, machine restarts. I can't even try anything now
View 4 Replies View RelatedI can not log to the admin account (no password set for the admin, hit enter).I tried that in normal mode and safe mode but no success.It is not a password problem.When I tried to log in it logged me out immediately.
View 1 Replies View RelatedInstalled drivers - now it wont shut down in normal mode, but will do in Safe Mode
View 2 Replies View RelatedWhen you turn it on, Windows XP boots up then I get a blue screen saying:"BAD_POOL_CALLER 0x000000C2 (0x00000043, 0xCF16C000, 0x00000000, 0x00000000) Beginning dump of physical memory Dumping physical memory to disk" Then it reboots to the same screen.
View 1 Replies View Related