I installed windows XP on a HP Pavilion with a 20 GB HD using NTFS then found out I should have used FAT32 on a HD that is less than 32GB in size. Also read that I cant go back to FAT32. I was reading on bootdisk.com that I can do a clean install and delete existing partition and when asked to reformat type in a number less than 32GB then go from there. Will this work? My main question is should I bother and why? It seems to work ok using NTFS although a little slower than my brand new Dell. Its just plain fast.
I'm trying to convert my external hard drives to NTFS from FAT32.I have used convert f:/fs:ntfs.I am getting this message:"The type of the file system is FAT32.""Enter current volume label for drive f:"
i have an old computer that has xp pro and i would like to put windows 95 on it but i can not because the file system NTFS is not supported by win 95 how can i convert the file system back to FAT32 to be able to use windows 95 is there any free programs or something that can do that?
Yesterday I upgraded my old computer to Xp, but I did so on only one partition, and I left It at FAT 32 just to see if it would work. Now Iam going to convert to NTFS because everything went fine and now I just want to free up space and reformatt the hard drive, basically getting rid of all the information on it and starting fresh. I just want to know if I can reformatt, and the steps for doing so if I can.I only have one partition on this computer that is why I am concerned about the reformatting thing. I tried to formatt when it was still FAT32 but it was saying that i needed to close all remaining things that were using this system.? I am going to convert to NTFS reguardless I just want to free up all my disk space that is being stolen from the old 98 system files.
Convert from fat32 to ntfs:From the command line: CONVERT C: /FS:NTFSHowever, the best way in my opinion is a 3rd party product such as Partition Magic (version 7.0 or later). Lets you do everything from within the GUI and it's a delight to work with. Without Partition Magic, this is a one-way process (you cannot convert back to FAT without a reformat)
At an office where I work, the XP installation has been upgraded, but the file system is FAT32.I tried to install a photo card reader, and the system crashed. What are the dangers, in converting to NTFS using the convert.exe command, in losing data already installed? I don't want to be blamed for the wiping out of any of the current set up, but I only know NTFS, and have never used FAT32 with XP.
I wanted to convert NTFS or FAT32 but my laptop don't have a floppy drive so I can not use the win98 or ME start up disk. I can not format my drive but I can use fdisk from the win98 cd.
I am using windows XP with SP2 presently running on the FAT32 file system. Can I now convert to NTFS? What will the effects be or will I lose all my data..Is there any advantage to use NTFS?
To change from FAT 32 to NTFS file system for more stability, security and less fragmentation, open the command prompt and type:Convert C: /FS:NTFS Is it safe to perform that little trick?
I have done analysis of my PC with Microsoft Baseline Security Analyzer (see image) and it tells me I should convert my D drive into NTFS. Is it safe ? Can I do it without loosing any data ? How can I do it?
so, a few years back i read a magazine that said to change the type of computer in device manager to standard pc because it made the computer run a little better or faster.so now i've got my laptop and i've noticed it getting slower and thought that i would do this... VERY BAD MOVE! i can still boot windows and everything - it meant that i had to let the computer reinstall all of the drivers for my hardware - but i have noticed in the device manager now that there are two instances of 'standard pc', there is also a new section titled 'other devices' with about 15 devices that seem to have no driver for them - some mention 'ISA' so i am guessing that changing to standard pc means that windows thinks my laptop is now a desktop pc with ISA slots? i find that when i put my laptop lid down the thing shuts down, when i press the power button it turns off straight away (doesn't even shut down!). i had had the laptop configured for ages to do nothing when i closed the lid and give me shut down options when i pressed the power button. i look in power options and i can only cinfigure the monitor screen and hard disk power off options - every other option is not available. when i do bring up the shut down options i can no longer choose standby.
i have also realised that i can not turn on my wireless connection - i've tried all sorts to get it to work with no avail! the laptop is an acer ferrari and when i call up the manager app it says that bluetooth and wireless are not present (by the way i can still get the bluetooth button to work - correction - it starts up with the button on but if i turn it off it won't let me turn it on again). the emanager and presentation manager buttons on the laptops casing don't work either (i have to access them via software route).
I am trying to reformat my HD but can't get past the "Loading Setup files".I have a Win XP SP1 CD from which I am trying to reinstall by reformatting my HD. Current OS on the computer is XP SP2. After booting from the CD, it goes through the Loading of Setup files and then I get the STOP ERROR. It says that "A problem has been detected and Windows has been shut down to protect your .....". I have tried restoring my computer to two different previous checkpoints but I can not get past that screen. I have never encountered this problem before because I have clean installed several times but this time I am having this problem.
Im extremely frustrated, computer keeps freezing not sure why. The freezing occurs randomly sometimes it occurs just after startup while other times i can play a game for a few hours before it freezes. Ive been in a repair shop a couple times and they havent solved the problem despite replacing the mother board and power supply. They also reformated the computer and still get the freezing problem. Also when it freezes i turn the power switch off on the back and then i get a noise from the speakers that sounds like someone tapping on a the desk. How can i discover the problem?
My friend has an old computer running XP pro. He only has USB 1. If I fitted a USB 2.0 PCI Card would this enable him to run he's printer which needs USB 2. I said it would but I don't want to buy it and find out I'm talking rubbish.
With a direct link to the software to convert .pst to .csv?My PST has corrupted(280MB size) nd tried fixing with few free softwares including scanpst but negative.
I have an EEE pc here, with only 2gb SSD inside, and running windows! (Yes i really would be better off selling it on ebay and buy some lego or something) - buuttt, I had a final thought before doing so; to span the volume onto my external drive. However when I try to convert my external 2.5" IDE 40gb HDD, the 'convert to dynamic disk' is grayed out. I don't know what to make of this, and have found nothing much specific enough on google so far.
I have a Dell OptiPlex GX1 currently running Windows 2000 pro.I went to Staples yesterday and purchased XP Home Edition and want to upgrade the Dell. I thought I would be able to just put the cd in and start the process but it keeps giving me an error and says that This version of windows is not compatible, What do I need to do to get XP home to install on this pc?
I run XP Pro SP1 with Fat 32 and when I try to back my 80gb hard drive to an external 80gb hard drive, I run into file size limitations. Since a full back up is over 5 hours, I usually try to run it when I'm not around but it stops to await a prompt from me to proceed to the "next media" In the documentation for the back up software, it discusses NFTS. For some reason, I chose not to convert to NFTS when I upgraded to XP but can't remember what it was at the time. What are the pros or cons with NFTS as opposed to Fat32 and what problems may I encounter with a conversion?
I already converted my HD from FAT32 to NFTS. I ran the "fsutil fsinfo ntfsinfo c:" and it shows my cluster size of 4096 KB. BootIT NG also confirms the 4KB cluster size.So..Is that all I needed to do? Is there an advantage of formatting a HD directly as NTFS? Is the convert command (with the 4KB cluster size) enough or will a re-format give better security, performance etc.
couldn't get on with vista - way too buggy installed xp - all going very well but now I can't read my emails is there a way to convert them into a format that xp can read?
I have a GM SATA 160GB External Hard Drive that is USB compatible.During a recent file transfer, a suspected Virus infection caused all folders to executable files which even could not be viewed. Failing in several attempts to recover any of the affected files, I resorted to various formatting procedures including Low-level formatting. RAW file format resulted and now I need an NTFS file format to be able to use the drive!
Ever wanted to convert your internal Zip Drive to a portable one? Purchase a Mobile Hard Disk Rack. Install your internal Zip Drive to the Rack. XP will automatically recognize the Zip Drive and you are good to go!
I have a Blackberry (BB) and in our firm we have MS Exchange server 2000. So when an e-mail arrives, it is sent to my BB too. But when the e-mail is written in cyrillic I cannot read it. I found out that when the message is sent as Unicode (Tools --> Options --> Mail Format --> International Options. For MS Outlook) I can read it, otherwise - I can't. But I cannot tell everyone that writes mails to me to do it that way, because not everyone is using Outlook. So is there any option in Exchange that will convert every e-mail that has arrived in Unicode, and that way I could read all cyrillic e-mails on my BB?
