I recently purchased a USB external hard drive by Western Digital. The drive shows up in the device manager. but no drive letters show up in My Computer or Windows Explorer. I can click on Start,Run,F:, enter, and a window opens up with the drive letter as the header. Any ideas how I can get the drive letter to appear in My Computer of Windows Explorer?
View 2 Replies
I installed a new hard drive, the only drive, in my computer and installed XP pro. There was a card reader in the computer which was assigned c drive and the local drive was assigned h on the disk. I disconcected the card reader and changed the local disk to c from h in the registery. Now when I turn on the computer the blue screen introducing XP comes on and goes no farther.
View 3 Replies View RelatedI had a problem with my windows. When ever I plug in my Flash drive (i got a few: kingston data traveller 1gig, pendrive 128mb,etc) onto my usb port. Window will be able to detect the drive had been plug in. I can see the "Safely Remove Hardware" icon on the right side of my task bar. But i cannot see the drive appearing in "My Computer". If I double click on the "Safely Remove Hardware" icon and try to view the external drive information, I can see that its already detected and being assign with drive E: . Even if I open a windows explorer and type in E: , it will throw me an error "Cannot find 'file:///E:/'. Make sure the path or Internet address is correct". But if I were to restart my computer, then i can see it for the first time. If I disconnect it (thru the "Safely Remove Hardware") and plug it back in (or plug another flash drive), I cant see the external drive. Causing I had to restart my computer multiple time a day.
View 3 Replies View Relatedif we can assign a letter for a drive [for example, C:], then, can I assign a letter to a folder? Because when I save/open a file or anything like that, I can just type the letter of the drive if I want to access a drive
View 14 Replies View RelatedXP SP2. I have a card reader on my printer that I never use. how can I make that drive not show up in my computer?
View 2 Replies View RelatedI have two hard drives each divided into two partitions.I performed a clean install and repartitioned the C drive into C: and D:"My Computer" shows the C & D partitions correctly but does not show the second drive with it's partitions D: and E:In "Disk Management" of "Computer Management", my secondary drive is shown as Disk 0 and not being partitioned with all the GB combined.
View 14 Replies View RelatedMy office has a number of mapped network drives for each user which, unfortunately, start at drive letter F.Each time a USB device is used on the computer it is also automatically assigned the drive letter F (presuming that C is hard disk and D and E are CD/DVD drives). This has to be manually changed from within Disk Management.Apparently this is as a result of physical drives taking precedent over the mapped network drives.Is there any workaround for this other than moving the mapped drive letters further along in the alphabet? - this is not really a feasible solution at this time.
View 4 Replies View RelatedI installed a Serial ATA hard drive. Booted from floppy,partitioned and formatted 120mb HD,with 2 partitions.
Connected my old IDE drive and booted from Norton Ghostdisc, cloned my old drive to the new one. Removed all drives and USB card readers except the new SATA drive. Windows will not fully boot, it halts at the blue Windows intro screen. Restarted Windows, and scandisk ran, but indicated drive letter "H" not "C", so I guess the windows installation is still looking in the original place for it's files, ie. the "C" drive, that's why it won't boot. You cannot change the "System" drive letter from "Computer Management" within XP, and I cannot get into Windows anyway. Is there a "work around" for this, other than a clean install? Even then, is it still going to be drive "H"? And that means another Windows activation. How many goes do you get for activation? I tried a windows repair installation, and reactivation (wasted). Windows then worked, sort of. Lots of things were missing and programs unuseable,as they were looking for their files on "C": so I went back to square 1, put my old drive back in for the moment
I had to reinstall XP because of spyware issues. I saved important data on my slave drive. I reinstalled XP. Now the bios, device manager, and disk manager recognizes the slave drive but didn't assign it a drive letter. In disk manager it shows as a basic disk, NTFS, Healthy (Active), 18.65 GB,Online. When I right click the volume to assign a drive letter it is grayed out.
View 2 Replies View RelatedAfter reformating my pc, my secondary hard drive is now designated as drive "D". Before the reformat it was drive "G". I have software that needs to get data from drive "G" but the drive is not designated as "G" any longer. I can't remember how to reassign the drive letters so that I can designate the secondary drive as "G".
View 2 Replies View RelatedI have just bought and installed (to the point of completing initialization under Disk Management) a new 1 TB hard drive. Originally, I was planning to use it solely for data storage.However, I am thinking of installing Windows XP Pro and all the programs I currently use on it, thereby making it the new OS and programs drive, while using the original 120 GB HD as a data/backup drive.I think the main appeal of doing this, for me, is that it also presents an opportunity to reinstall Windows on a machine which hasn't had this done for more than three years, and which currently seems to take at least five minutes to boot to a "usable" state, despite having a reasonably high spec for its age (it was bought in 2001, but as a result of the upgrade
View 10 Replies View Relatedthe hard disk partitions shown in the my computer folder usually have a name as well as drive letter associated with them.today as i opened my folder the name of the drives along with the folders cd rom n floppy disk were missing.when i select a drive the information shows up in the left hand pane
View 4 Replies View RelatedMy hard disk and cd-rom drive doesn't show up when I go to My Computer.Doesn't work in Explorer or in Vapor.It's all there and working fine when I go to Device Management.I've got Windows XP Home Edition; service pack 2
View 2 Replies View RelatedMy external drive has always been "E" and I have several desktop shortcuts that relate. Recently I inserted a flash drive containing home movies and after viewing and a reboot later I noticed that my external drive is now shown as "New Volume F". I would like to change it back to "E"
View 5 Replies View RelatedA laptop has 5 mapped drives which are only used on the office. Offline files is not an option. When a user on the road clicks on a mapped drive by mistake, the explorer window locks up while it tries to find it.
Instead of doing something sensible like taking the explorer window to C: drive or desktop, it goes to the next drive letter. Of course this is also unavailable. So the machine is essentially unusable for about 5 minutes if the user mis-clicks once.
I have a dual boot system with both having windows xp.When I load into the 1st XP installation, the following is the list and assignment of the drives:
C : Local Disk (contains the 1st XP installation)
D : CD Drive
E : Local Disk (contains data and also few installed program folders)
F : Local Disk (contains the 2nd XP installation)
Initially when I noticed this drive arrangement after setting up the dual boot, I just left it as is, not knowing what to do.But nowadays I am having a lot of problems as the installed programs are not accessible because their target location keeps changing, everytime I keep switching between the two operating systems.How can I solve this problem?Can I do the follwing : Load into the 1st XP installation, and then change the drive letters (of the last three drives) such that they are matching the drive assignment as seen when loading into the 2nd XP installation.Here in a way I have kept the same drive name for both installations.But Will this work?I also have some of the program folders for the 1st xp installation stored in E drive, and after changing it to D drive, will all the links be properly converted upon restart?
not being computer literate , i am having a problem with a new hard drive . i took out the old one . i have the windows disc and product codes , but i can't get it to boot to start the windows installation. i have done it on another computer , and the disc begins installing windows on start up. i have tried starting the computer with the disc in place , and without it . obviously , i must be missing something to get it started . the disc is brand new .
View 8 Replies View RelatedOn our WinXP systems (SP1 & 2), when users attempt to us usb flash drives, sometimes the O/S tries to assign an already used network drive letter to the device, making it unaccessible. Of course, the non-admin users can't use drive manager to change the drive letter. Is their a way around this problem?
View 2 Replies View RelatedProblem is after reinstalling xp on a new hard drive my second drive only shows up in disk management does not show up in my computer .It has all my stuff on it from my old drive so really need teh info on it badly.But under disc manmgement where it shows up healthy with no drive letter everything is blanked out except delete partition.
View 4 Replies View RelatedWin XP Pro, USB 1.1 in front, 2.0 card added to PCI slot.I can put in a jump drive or a flash memory card reader and hear the XP bong, it does the new software found and says it's available, but It does not show on 'my computer'.I can go to manage, disk drives, and see it. I can right click and assign a drive letter, but still does not appear on 'my computer'.I can still open it after assigning a drive letter in 'manage' and read/write files from a new window.I'm suspecting BIOS? It was a machine I upgraded to XP Pro.
View 14 Replies View RelatedI have a Dell Pentium 4 computer that has it's C: drive changed to the drive letter F: which causes some problems for me. I would like to know how I can change it back to C: without reloading my OS.
View 7 Replies View Relatedas i know at winxp disk management there can change drive letter, i saw on there only have A: to Z: only, is it only can assign drive letter from A: to Z: only? if i need more drive letter how?
View 3 Replies View RelatedI am having an issue with changing the main drive letter on my mother's computer. I made a pretty amateur mistake when I was re-installing Windows XP for her and left my external hard drive connected from taking her files off of her old hard drive so the installing found "H:" being the most appropriate drive letter and now a few badly written programs she has tried to install automatically fail because they are set to look for drive "C:".I know my only option is to re-install yet again to get a fresh start, but I was hoping there was another possibility (albeit might be harder) to set the drive letter right. Typically I went to "manage" and "drives and storage" and attempted to change the letter, but Windows will not allow me to change the drive letter of the main volume. If anyone has any suggestion, please throw them out there-I may have made an newbie mistake, but I know my way around pretty well.
View 8 Replies View RelatedWhen I open an e-mail with an attachment,I get the message-drive letter access component has encountered a problem.I have to download it into my documents,then it will open.What is the problem?
View 10 Replies View RelatedI am trying to revive the local Priest's computer - he has nothing backed up (and I'm not even Catholic ;-))
He has a Dell Dimension 933r running Windows XP Home. When he started the computer yesterday it started to boot into Windows and then just restarts in an endless cycle. It got to a point where it came up with an error "autochk not found - skipping autochk" and then a Windows XP BSOD (the ones with some hex addresses) pops up with an error for about a tenth of a second (I cannot read anything on it - it is too fast).
I pulled the drive and put it in another computer. The computer (Win XP Pro) finds the drive and it shows as "healthy" in Disk Management, but it does not assign it a drive letter. I would just like to be able to get in and copy his data.
I've had to reinstall Win XP Pro on my computer.Now here's the twist, before the reinstall I had the following drives;
C (Computer Drive)
F (My Sister's Drive)
D (Mp3 & Wav)
E (Digital Pics)
I proceded to reinstall Win XP Pro only to discover that my original C drive was now labeled F, and the original F drive is now labeled C.
I installed it anyway thinking I could just change the drive letters afterwards. So I thought, I cannot change either one as drive F's status (Boot Volume) and drive C's status (System Volume), and Windows will not allow any drive letter changes to System and Boot volume drives.
I just upgraded my "guts" (mobo, ram, cpu) and am trying to get all set up. I installed windows XP on a brand new hard drive on a newly created partition. On the setup screen, it says C: Partition1 [NTFS] I left some unpartitioned space on the new drive for a later win xp 64bit version install and I also have another HD that is listed as D: Partition1. After the install, my system disk drive letter was F: and my other HD letter was E: I go to disk management and I can change my second HD letter but it won't let me change my system drive letter back to C:. How do I get my system drive letter back to C:?
View 1 Replies View RelatedI was doing a new installation of XP home on a new hard drive, XP formatted the drive as F: and installed the boot sector there because a thumb drive was in the usb port (which it recognized as C:). I wasn't paying that close of attention and I didn't realize XP would see that thumb drive as C:. My question: is there any way to change the boot letter back to C: without reformatting the hard drive?
View 3 Replies View RelatedI want the drive letter of my Sony DVDR/RW to be X, but every time I reboot it changes itself to drive H. I am using xp home, SP2.
View 7 Replies View RelatedI want to rename drive E (10gigs) to lets say drive S...is it as simple as right clicking and renaming the drive in most cases right?.
View 2 Replies View RelatedI have Windows XP Pro, sp3. When I got my first external hard drive (HD), I thought it would be a hassle to get windows to see it but it was very easy. I just plugged it in, via USB, and it put a drive letter in Windows Explorer (WE) and I could access it like any other drive. It was easy. My question is: if I get another external HD, can I use it along with my current external HD? That is, can I use the new external HD without unplugging my present external HD.
View 3 Replies View Related
