Open The Folder Access Is Denied
Mar 30, 2006
I wanted to move a folder from one location to another.I cut the folder, went to the desired location and pasted it.When when trying to open the folder it said access was denied.I went to it's properties and unchecked read only, tried to open it again, access is denied.I checked properties again and read only was still checked.I then did a system restore to 2 previous dates.Both resulted in the folder going back to it's original location.I was then able to go into the folder but did not have access to view any file in the folder.
View 9 Replies
ADVERTISEMENT
Jan 26, 2008
I have a new Dell computer with windows xp operating system. My old computer was a gateway with windows xp also. The mother board on the gateway crashed and I could not find a replacement thus I purchased the new dell. I extracted the hard drive from the gateway and installed in an external drive case. All works well and I am able to retreve data from the gate way hard drive with one exception. While the hard drive was installed in the gateway I elected to make some of the folders private, ie right click on folder, click on sharing and security and clicking on private. This worked fine in the gateway but when I installed in external hard drive I am getting an "access denied" error message when trying to open with the Dell.
View 1 Replies
View Related
Jan 30, 2008
I am using Windows XP Pro. I have three user profiles on our family computer. They all have administrator rights. On my profile when I click on the "program files" folder in windows explorer I can view all the program folders and files. When I go into the other profiles and click on the "program files" folder I get an error message that says "c:program files is not accessible. Access is denied." I know that in the past I have not had any trouble viewing this folder in any profile.
View 3 Replies
View Related
Jul 22, 2010
The rest of the message says "Make sure the disk is not full or write protected and that the file is not in use".In Folder:Properties, the file shows as 'Read Only'. Unticking this box followed by the option to do the same for all folders and subfolders, then using 'Apply' was unsuccessful, as when I tried to rename the folder after doing this,the message reappeared, and the folder was again 'Read only'.As Administrator, my understanding is that I have full permissions under the Security section of Properties, which appears to be the case, as all boxes are ticked.The path is as follows:- C:FOLDER:Sub folder 1Sub..1 cannot be renamed. It contains four additional folders, (each with loads of subfolders),of which 3 can be renamed, whilst the fourth one cannot, with the same "Access denied..." message appearing.
View 16 Replies
View Related
Apr 11, 2006
Files on my second hard drive were shared on the network (level 4, Network users could only read) and primary hard drive was reformatted and Windows XP sp2 was installed.(without the files being unshared) Now when trying to access the files the error "Access Denied" occurs and I cant access or delete the files (would really like to recover the data about four years worth of work taking up about 75% of the hard drive)
I am the Admin, and I can't change any of the folders propertys as I again get the "access denied" error. I've been looking everywhere for a solution to this, this is what I found from MS help (not very helpfull)
A file's permission may differ from the containing folder if one of the following conditions is true:
View 4 Replies
View Related
Apr 20, 2006
After the installation of windows xp the access to my computer is denied
i have followed the instructions until "click to clear the Use simple file sharing (Recommended) check box" because there appears to be no check box under this description.
I have over 20gig of ireplaceable files in this folder i would really appreciate some more assistance.
I'm using Microsoft Windows XP Home Edition sp2
View 12 Replies
View Related
Sep 12, 2005
I just completed a system restore on my eMachines computer. I have Windows XP. Now, I had one folder that I backed up, but now everytime I try to enter it, it says Access Denied. I did hide this folder on my hard drive before, but all of my other hidden folders that I backed up work fine. I would really appreciate it if somebody could tell me how to gain access to this folder, I have very important information in it.
View 3 Replies
View Related
Jan 15, 2007
I have a Dell 4600 with with 769MB Ram and Windows XP Pro. My XP boot sequence got corrupted (according to Dell) on my "C" drive. They wanted me to reformat the drive (and lose all my work). Instead I installed XP onto my secondary drive and nenamed it "C", set up a special partition on my secondary drive to receive the old files ("D") and renamed the "bad" drive to "G". Though I can access/copy most files from "G" onto "D", my "Documents and Settings/Administrator" directory on "G" (not password-protected, but contained a lot of files) are all "access-denied". I can't open/view these files on "G" or even copy them to "D". If I try to open them, I get a "files inaccessible, access is denied" msg.
View 3 Replies
View Related
Dec 17, 2008
Whenever I try, I get a dialouge box that says 'access denied'. Am I missing something?
View 1 Replies
View Related
Mar 25, 2006
I have a drive (D:) that I am trying to delete remnants of a corrupted OS (XP Prof) and am having a difficult time trying to eliminate 3 folders: a) My Documents; b) Recycler;c) System volume information. I have gone into Safe Mode, to take ownership of these folders but to no avail. I am logged on as Administrator, and have gone this route because in normal and safe modes, the message of "ACCESS DENIED" comes up. Need some
direction.
View 6 Replies
View Related
Jun 18, 2005
My computer died so I took the harddrive out and put it in my other computer as a second drive (not the drive to boot from). Now everything under the F:Documents & SettingsLen" directory cannot be accessed. If I look at the "Len" directory and all of it's subdirectories on the second drive "Make this folder private" is not check so I don't understand why I can't read it. In fact the "Make this folder private" is not checked. If it helps any the drive is an NTFS drive.
View 6 Replies
View Related
Jun 20, 2005
It says I am unable to access certain folders when I click on them.. Now that I have all my space cleaned out I am downloading a demo paint program for my school work.. and I get a message that my Temp folder is unable to to be accessed and I have prove access.
View 1 Replies
View Related
Jul 18, 2009
Using XP sp2, trying to clear out some useless files on an external drive, no matter how many files I deleted it didn't make much change in space recovered then I checked the size of Windows Live One backup file,50 gig,(wow) that's 60% of the total drive space, while trying to delete it,I get the message "cannot delete DO_NOT_DELETE.mediaID: access denied" Make sure the disk is not full or write protected and that file is not currently in use.
View 4 Replies
View Related
Aug 27, 2009
When I D/Load some programmes I get access is denied. I had previouly reformatted my HD and now have drive F, when I try to access certain folders or /and executable programmes access is denied. Currently trying to install Roboform in Firefox
View 7 Replies
View Related
Jun 1, 2007
I did a terrible mistake today. Typically I install XP in C drive and keep My Documents folder in D drive. All of my hard disk drives (except the linux partitions) are NTFS. I encrypted the My Documents folder and all of its files and subfolders.Today I reinstalled XP in the C drive, after a quick format on it. I was unaware of the fact that what might be happened to My Documents folder. Now I can only view the files and folders inside My Documents folder. Neither I open any file, nor I decrypt those files. Windows is saying access denied.
View 9 Replies
View Related
Oct 1, 2007
I reinstalled Windows with the backup feature provided with the backup (emachine). After I had updated windows completely & replaced my extensive collection of fonts I went to put all my personal files back. I get this message:
Quote: "FOLDER LOCATION" is not accessible.
Access is denied. It's the "C:Documents and SettingsOwner" folder
It has all my music, videos, photos, & work for things I do in it. I can get into my 'WINDOWS' folder and 'Program Files' but not that.
View 3 Replies
View Related
Dec 1, 2006
My computer started acting up. I ended up having to do a system recovery. When I did this though, it deleted all of my names (User accounts). In Windows Explorer I can still see them though, and even access the old files of that one.
Now, the main user account I used on this computer needed a password, so I assume that is why it is giving me an access denied message when I try to open it.
Is there any way I could be able to see these files? As I said, the accounts are erased from the main welcome page, so I wouldn't be able to click on it from there to type in a password.
View 6 Replies
View Related
Sep 8, 2005
I had to re-install Windows XP Sp2 and I'm having a problem with the mailboxes and other files in my Eudora directory. Eudora is receiving access denied to the mailboxes and I cannot rename, copy or move the email box files with Windows Explore. I get an "access denied" error.
I've tried using an app to remove controls from the files but it says they aren't being controlled by another program. And "properties" says they are NOT read-only.
View 2 Replies
View Related
Jul 27, 2006
i wanted to merge 2 partitions using partition magic 8. i igot the thing started but got an error 1552: frs entry is free
so i booted and the new partition was unaccessible (small hd icon with a question mark). i rebooted again and the partition was online but i couldnt access my data on it. i ran chkdsk /f, it corrected loads of errors but i still cant access my data. it says: "access is denied". i really cant afford to lose this data.
View 2 Replies
View Related
Apr 25, 2005
Every time i try to download the upgrade windows XP service pack 2 i get a message that says access denied, does anyone know how to fix the problem?
View 6 Replies
View Related
Jan 30, 2008
Failed boot and inability to read the file system from a boot cd.
I did a chkdsk /r on the drive, and the file system is back. Ive also done a pass on the drive with a virus scanner and noticed a folder C:Program FilesCommon FilesServices" with the all of the files consisting of randomly generated executable names (514 in total), refer to attached text file for full list.
In explorer, the files show as green.
The problem is the virus scanner logs the file as "access denied".
The file initially had security permissions set to everyone with write only and the owner was some wierd clsid like object.
View 1 Replies
View Related
Aug 19, 2008
I have a Dell 4500 using Windows XP who's processor died. I removed the hard drive and attached it to my Dell 1150 via a IDE/USB adapter kit. It appears that everything is available. However, when I go to 'Documents and SettingsJustJeff206documents it states that it is not accessible and that Access is denied. Other files that are not under my directory can be accessed. I have run Chkdisk with no problems detected.
View 1 Replies
View Related
Aug 22, 2005
I have 2 XP's PC, 1 was recently rebuilt last week. On the rebuilt PC, I created 2 shared folders and access to the shared folder files was working.
I created 3 new accounts (1 admin and 2 power users) on the rebuilt PC. When to you try to access a new rebuilt PC user account shared folder file from the other PC, I receive a read only and access denied message.
View 2 Replies
View Related
Apr 15, 2007
HD would copy files from the old HD to the new HD so I copied all the old HD files to a different partition of the new drive (G Drive).
I now attempting to copy or move files from the copied old HD to the new HD and I am receiving the error message Cannot copy Access is Denied. Make sure the disk is not full or write protected and the file is not currently in use.
Using Word or Excel, I can open some of the copied files if they are NOT in the Documents and Settings directory. But if I attempt to open the files that are in the Documents and Settings directory, the error message is Cannot Access Read-Only Document.
View 2 Replies
View Related
Jan 12, 2007
http://forums.techguy.org/windows-nt...ighlight=joono that ended in the conclusion that the offending copy of XP was pirated. I know for a fact that my copy is legal, I got the discs it direct from microsoft, so that should not be an issue.
I did the SP2 install thing and after about 20 minutes I got an 'Access is denied' error after which the removal wizard unravelled everything and I was back to square one. After a bit of research I came across http://support.microsoft.com/kb/873148, which looked promising, and followed the very clear instructions as far as step 2.e. but I cannot find an error that looks like the one illustrated.
View 2 Replies
View Related
Jul 4, 2005
I have windows XP home and I created a limited access account in windows so other people can use my pc and not change any of the config, but when I log on to the limited access account, I get many many times the ERROR Access Denied.
The problem is, the error message doesn't specify what programs are trying to load and are denied. Is there way I can see which programs the limited access account don't have access to, and grant access to the ones needed?
View 1 Replies
View Related
Dec 25, 2005
I have no idea what may have caused this problem, but recently, whenever I try to open a .msi installer file, I get an access is denied message. This happened a couple of weeks ago, and I left it alone. Now, I just discovered that when I open a .msc file (like services.msc), I get the same result. I went back to that same installer and the same thing still happened. And right now, I just recalled that the same thing happened with .log files. I just tried to open one and it wouldn't let me. Anyone have any idea what caused this or why it is happening? I couldn't find any help on Google or on previous posts.
View 1 Replies
View Related
Aug 17, 2005
I have tried for months to install the SP2 for my Windows XP. I even ordered the CD to try to install it that way. No matter what I try, including printing out all the help steps and doing them, it seems to be about to the half way point when I get a message that says 'Access is Denied' and it stops
installing.
View 4 Replies
View Related
Oct 20, 2007
I Recently had a norton antivirus trial period expire. I ran an uninstall and downloaded and ran the removal tool on the norton website. there was sometime I went with no protection and picked up some viruses. At sometime these removed my administrator rights.there is only one user account on this XP computer I lost my control panel, no access to security center, My active desktop went white and I get "access denied Please contact your administrator" messages when I right click properties on the desktop. So I ran several free antivirus programs and spyware programs and i believe i have removed any and all viruses and spyware. I Have regained control of the active desktop and can now use control,alt,delete! but I still have no access to control panel, security center, or desktop properties. I recieve a message saying "access denied due to restrictions on this computer contact your administrator"
View 14 Replies
View Related
Sep 9, 2005
I have a friend using WinXP SP1. They had a problem and the Computer would no longer boot up. Had to do a fix found on KB Site that copied "WindowsSystem32ConfigSystem and 4 other files. The computer then worked again as before, however it overwrote something, and the user can see all files on system, except the original "My Documents" folder. When I Click on it, it says a message along the lines of "Access Denied" I forget the exact error message. The other thing that happened is that none of the programs are available any more. eg: Office Products show Icons, but are not available to use.
How can we get the files in this folder back. It is the only Folder that is important, and the data will be copied to a CD and then I will have to format and reinstall all programs.
View 3 Replies
View Related
Mar 9, 2006
Okay, yesterday I downloaded 12.2MB .msi file for ActivePerl(Used for interactive Perl AI Bots), I got it, put it into My Documents and had to go to sleep after 30 minutes of downloading(Dial-up, gotta love it). Anyway, I got up the next morning and much to my dismay I got an error message saying "C:Documents and SettingsSammehMy DocumentsActivePerl-5.8.7.815-MSWin32-x86-211909.msi.Access is denied."Anybody know why this could be happening? The only idea I had was that I downloaded the wrong file, but I wanna be certain before spending 30 mins downloading again.
View 7 Replies
View Related
