Keyboard And Mouse Not Working Because Of Any Virus
Mar 8, 2008
I am having issues with my keyboard and mouse(hence the title). My keyboard works fine while in the bios and while booting, but once the Windows Bar stops going from side to side and I start to see my desktop load, the screen is in 640x480 resolution or something (like safe mode) and I can't use my keyboard or my mouse, even though the lights on both are lit(so they have power). Earlier, I was having problems with my hal.dll (long story, but I ended replacing it from my MCE OEM CD in the recovery console((which I have in my MBR Boot menu)), and now I am here). I think that that might be the contributing issue here, but I have no clue what to do next. The same thing happens when I enter safe mode. I would just boot from my XP DVD and do a repair, but DELL gave me a DVD-ROM OEM disk with my XPS 600 even though the only drive I can boot from is my CD-RW DRIVE as far as I know. I have checked my boot order in my bios. I can boot from USB or Onboard or Removable Hard drives and Cd Drives.
A buddy of mine is having problems with his PC. He said when he turns it on it seems to boot up fine (lights on case work) but his screen, mouse and keyboard are not working. Now Im assuming that all those burning out at the same time is next to impossible. I think it might have to do with the PC itself. I have yet to try a different screen and such just to make sure. Also if infact trying another screen fails i obviously will not be able to look in his bios, which leaves me kinda stumped.
so we just installed SP3 for XP. At first the boot was failing, made some hardware changes and all was good seemingly... now the keyboard and mouse no longer work, but they work when the computer just starts up. They just stop working shortly after. I plugged in a USB mouse and that works, so I was thinking it may be a problem with the PS/2 ports.
My PC seems to be working fine, running along. I went up close and checked if anything was fryed/unplugged yet no problems. My PC can turn on, but my monitor, keyboard AND mouse doesn't work
I am trying to install and new keybpard and mouse (Microsoft Wireless Laser Desktop 6000) I follow everything in the book, install the software and everything but they both dont work
I was in the middle of checking over my term paper and the mouse started to have a delay and if I moved the cursor slightly it would jump all over the page. Then I tried to delete a word with the keyboard and nothing happened. I turned off the computer and unplugged and plugged the mouse and keyboard back in and when the start up screen came up on windows xp to log in my mouse didn't move at all. Could any one explain what is going on? I would greatly appreciate it. I got to get my paper off that computer.
I went to a LAN party so I unplugged all my cables from the pc. When arriving at the lan party I plugged everything back in and booted into Vista Ultimate. Everything was detected properly and I encountered no problems.But when I got home again I wanted to boot into Windows XP Pro and that's where the problems started.
I know this is so simple for someone,but not me. I just changed the batteries in my wireless keyboard and now it will not type. My wireless mouse still works. I have had this problem before, but it has been so long ago I can't remember what I did to get it started again. I am using my laptop now.
I just recently reinstalled Windows XP on my computer, my USB keyboard is working fine, but my mouse is not working, I tried it in all the USB ports for it and I am getting no response, I am getting a curser on screen but no movement nor am I able to click.
My mouse and keyboard has both started to behave strange. 1.The mouse scroll wheel works sometimes when surfing on internet , but most of the time it does not. It works fine when typing in Word. 2.The mouse pointer jumps around randomly. 3.The left mouse button sometimes behaves as if it is the right button. 4.Sometimes the computer seems to freeze and will not respond to mouse commands. This can be “reset” by ctrl+alt+delete, and choosing “switch to” the program I was working in. This can happen even when only one program is running. 5.Sometimes the mouse seems to left-click and drag by itself. 6.The keyboard sometimes misses letters that I press
My first problem is that I can't shutdown my computer. I mean I can shut down the operating system, but the fan still runs. This seems to have come up within the last several weeks after I unplugged it once by accident. It wouldn't restart so I had to hit the reset button. I'd never previously used one, but thats what people suggested in other places when it wouldn't restart, just hit the reset button. So I did. Now I'm stuck with it not turning off. My second problem may be a direct result of the first. The last few days my keyboard and sometimes my mouse stop working.
I had a warning from kaspersky saying it had found and deleted a tojan.Ok, so it was gone, but since my keyboard and mouse just stop working when they feel like it. the strange thing though is the mouse will still move around (just wont make any tooltips appear or click on anything) and the keyboard wont type yet the shortcuts will still work for eg ctrl+alt+del, the windows logo key and ctrl+shift+esc are the ones i tried so far and they all work, and bring the correct things up
My dad's computer has come under attack by virus's and trojan worms
Not really sure what all started this..Tired several different programs to fix it..things were going good then BAM.Went into bios and keyboard works but after that point no keyboard or mouse.
I have a standard PS/2 keyboard and mouse which do not work as I try to enter Safe mode. As I am on Windows 2000 Pro, I need to log on as administrator. I am not password protected, but have no way of clicking the Log in button.There are no settings for Keyboard or Mouse in my BIOS setup
When i turned it on today, he got a message saying "New CPU Installed!" But, i am 100% sure did not install anything the previous day. did nothing at this screen, but simply reset his computer, and this time, it skipped this screen but a computerized voice said something like "------ inaccessible" , it is too garbled to hear. After this i can access computer normally, except for one thing. mouse and keyboard stop and start working at regular intervals
I am trying to fix a friends computer my usual story. Once it gets to the user screen for user selection both keyboard and mouse stop working, its either they stop working or the computer freezes, i am not sure. Life still goes to the mouse as it still lights. The keyboad works fine in the bios but not at freezing point.
My computer is stuck on the boot screen, the mouse is lit up as to be working the keyboard flashed its lights as it always does when you boot but then everything seems to stop there. the screen is stuck on the boot screen the keyboard doesnt seem to work (lights are gone and wont come back on.) the lights on the back of the computer (the yellow and green ones) are all yellow but one. The C light is green. they are a steady color. Not blinking. A,B,D are all yellow.
I have a friends PC, a gateway P4 2.6, winxp home. The mouse and keyboard up and died. He had a kvm switch, the electronic kind when it stopped functioning. I have tried usb, ps2 everything. The keyboard works on bootup, so I can get into bios etc... but when it gets to the windows screen, nothing. No mouse or keyboard. Safe mode is the same thing. Dont want to format and reinstall windows. On that note, I did try a repair, when it asks for admin password it wont accept it. Says invalid admin password.. The password IS windows admin password though. With no mouse even in safemode, and windows not accepting my admin password during repair,
My friends keyboard is not working. When she turns the computer on no lights come up on the keyboard. Have tried another keyboard and still the same. Unable to get into the computer to check bios etc as there is a password on the account.
I am experiencing a problem with the XP hibernation. The PC is resuming from hibernation with mouse and keyboard activity instead with the power baton. Almost like a standby mode.
I own a Dell Dimension 8400 system. I recently tried to download the Intel Chipset Software Installation Utility for the chipset from the Dell support website. As the installation of the software was completing, the computer froze and I turned it off. Now, when I reboot, the mouse and the keyboard aren't recognized after Windows XP loads. The mouse and keyboard do work before Windows XP loads.
I am working on a friend's PC and have encountered a problem related to the mouse and Keyboard being inoperative in Windows. The machine is a Dell E-310 with 3.0Ghz processor, 512 Meg RAM, XP Home and USB Keyboard and mouse. The machine boots into Windows and reaches the login screen OK. However, the Mouse and Keyboard are completely inoperative leaving the system stuck at the login screen. The Keyboard works fine when the machine is booted into the BIOS setup menu. I also booted the machine using a Knoppix CD and both the Keyboard and Mouse work perfectly in Knoppix. This seems to rule out any hardware issues and points to Windows as the culprit. Dell did not provide a CD with the Windows installation disk so I am kind of stuck on the problem at this point. The machine is past its Dell warranty date.
When my cpu spikes my mouse movements get jerky esp when hard disk is going then it can move around a bit by itself. Keyboard also have a delay between typing and the letters appearing on the screen.
I got a new graphics card today. So I went to Add/Remove programs, and removed the Nvidia driver. I rebooted the PC as requested. After rebooting PC (keeping the same graphics card in) the black Windows logo screen took much longer than usual. Then when it finished so that I could click on my profile, I couldn't, the mouse nor the keyboard are functioning. I tried a different mouse and keyboard. I unplugged my computer and restarted, I tried in safe mode and the same thing. The keyboard works at the BIOS screen because I can get into the BIOS and select safemode as needed.
my computers mouse frooze up and then i noticed the keyboard as well, and when i went to go in on safemode to scan for viruses it only came up with a tracking cookie.. now the computer is still freezing up and i reformatted the computer and after it was done it frooze as soon as the windows restarted...any ideas on what is going on?
My mouse and keyboard functions freezes within an hour of startup. I have a biostar u8668 pro motherboard, intel p4 1.7ghz, 512 ddr ram, cd and dvd writers and two hard drives. I am running windows xp pro with all the service packs and upgrades. I even flashed the bios with no apparent improvement. On immediate rebooting all is well for about the same time before it freezes again. What am I overlooking?
I have recently installed anti-virus on my other computer. I turned it off last night and this morning I turned it on to find the mouse and KB don't work. I noticed the optical light is on until the windows loading screen shows up and then it immediately shuts off. I have looked in the bios everything is enabled, I tried to boot into safe mode and that doesn't work either, as soon as windows starts loading the mouse shuts off. I tried repairing windows and when it reboots to re-install, the mouse light goes off again. Later, an error pops up looking for a file iaStor.sys, which i cannot locate because my mouse does not work.
After hibernation, cannot resume from ps2 keyboard or mouse. Resumes OK by momentarily pressing power button. Intel MOBD D915GAVL, WXP OS. No options in BIOS.
System infoV2 : PREMIER, XP Home Edition, P4, 2.6Ghz, 448mb.Did a complete virus and spyware clean and system runs fine now while removing some stuff from ADD/REMOVE I MAY have remove a driver or two by mistake , now my system powers nicely but i do not have use of my keyboard or mouse.Booting in safe mode just wont go anywhere so what next
i am running hp pavillion t550 with penthium 4, 512 ram, 80gigs hd. i have scanned it with pestparol and microsoft antispyware, scanned it with norton av many times and came out clean. done the error nuker too. i got about 70 percent space on my hard disc and at most times just using 260 on my ram.my pc just freezes up , randomly. it could happen after 15 mins. after loading or within 3 hrs. the cursor stays in one spot. no reaction from the mouse and keyboard.
