Getting Data From Corrupt Fat32 Drive?
Sep 6, 2007
Tomorrow I will be picking up a corrupt fat32 drive containing video files, an incident happened which would have been recorded on the drive, while trying to review the video the the dedicated software reported fat32 corruption, please re-format !I am going to try and mount the drive as a slave on my system if this fails I intend to run spinrite still no go then fsck (XP still has fsck for fat32 - right ?) If all else fails could you guys recommend any (preferably free) software to retrieve files from a corrupt fat 32 drive I have heard there is software that will scan the drive right down at a byte level and retrieve particular types of files ie jpeg or avi identifying them from their byte structure
View 2 Replies
ADVERTISEMENT
Apr 19, 2009
How do I check for this and fix it?
View 1 Replies
View Related
Aug 2, 2009
I have my windows XP Partition on the C Drive. I am trying to extract all the info from my D Drive and put it onto an External Hard drive. For some reason it is just not letting me transfer the files. I have tried to send and copy them over with no luck. I have tried using Acronis T.Image, but doesn't work (tells me that there is bad sectors and can't transfer). Tried using bootable disks (UBCD 4 Win, Drive XML, Norton partition manager 9.0 etc. As soon as I start extracting files it gives me and error message and asks if I want to ignore, retry etc. What would you suggest. I was going to run a disk check on this D drive, but I am afraid of it wiping out some of my files. Is there another bootable disk that I should use for extracting my files.
View 4 Replies
View Related
Dec 31, 2006
I had a bad HDD failure which corrupted part of my WinXP OS with the result that I am unable to boot into Windows. I have reloaded Windows on another HDD and I will be able to recover most of my data from backups. However, there is still some recent data on the bad disk which I am frantic to recover. I am able to find the "Documents and Settings" folder where I believe the "Outlook Express" data is held
I am unable to get into the folder as my username on the computer was passworded (the password is known). Neither am I allowed to copy the folder to my new drive. I cannot access the folder from my new OS even when I password myself with the same username / password. I have attempted to repair the bad drive's copy of Windows but that wasn't successful. I don't want to replace the bad copy with a fresh as this would reformat the drive taking with it the folder I want (and can't copy). Any work on the folder would need to be on the bad drive, it seems. I have run out of ideas.
View 2 Replies
View Related
Sep 2, 2005
I have a HP Pavilion a250Y running a Pentium 4 with WinXP Home.
The "installed" 80GB HD has had it's boot sector scrambled and will no longer boot up. I installed a second 20GB HD from a previous HP computer that I now have up and running with Win XP Home. I want to reformat the 80GB HD and would like to temporarily store data from this drive onto the 20GB HD. The main concern I have is that the larger drive is formated in NTSF and the smaller in FAT32.
Questions:
#1 Can I store the NTSF data on the FAT32 drive just to keep it protected with only the intent to transfer it back to the 80GB HD after reformating?
View 4 Replies
View Related
Mar 26, 2006
I recieved my new PC today. Something obviously went wrong when I was installing drivers and necessary software. It was either during ZoneAlarm or ATI's display drivers (from the CD, until I could download the latest off the site). After that things have been a bit unstable. I managed to uninstall ZoneAlarm. I turned off auto-rebooting and tried launching GAIM as it was affected by the ... mess. gaim.dll wouldn't launch, and I got the IRQL_NOT_LESS_OR_EQUAL blue screen. I scanned with NOD32 and I didn't find any viruses, but everything inside driver.cab is, well, see for yourself.
View 1 Replies
View Related
Feb 7, 2010
Scanjet 3970 & Windows XP home. Had a "trogan horse" attack - supposedly had fixed; however, scanner would not work. Got message "An error occurred communicating with the scanning device". So tried to uninstall and reinstall. Now get message saying "The configeration data for this product is corrupt". Now what do I do??
View 1 Replies
View Related
Jul 1, 2008
I've recently had a problem when opening many programs such as Microsoft Office, iTunes, etc. When I try to open them Windows Installer appears and there is an error message stating that an error occurred while attempting to create the directory C: DocumentsandSettings/AllUsers/Application Data - then the program fails to open. When I found this Application Data folder and tried to open it there is a message saying it is corrupt and unreadable. Any ideas as how to repair this folder? as I currently cannot open many programs on my computer due to this error. Thanks in advance! btw I have Windows XP Pro
View 1 Replies
View Related
Sep 4, 2005
I can recovering my data from a hard drive I've recently corrupted . Whilst in the process of moving/renaming partitions I've managed to corrupt my harddrive which contains an xp operating system, four partitions and 150 gigabytes of movies etc. I've now installed xp on my other drive but it wont recognise the other one. Infact its not recognising the other disc or its patitions at all, even thru windows recovery 'chkdsk' where it just says disk it unformatted. Norton disc doctor at least recognised the disc as corrupted (and unformatted) and declares a bad partion table but is unable to fix it. I think my data is probably lost for good and I'm going to have to reformat
View 2 Replies
View Related
Feb 26, 2005
let's just say me and my PC haven't been getting along very well lately . In the last 2 weeks I've successfully fought off a nasty CWS infection, subsequently upgraded to XP SP2 and all the latest patches, and now this. I was using the machine yesterday morning, and it was exceedingly sluggish. Task Manager showed that TurboTax which I'd left running wasn't responding. I repeatedly attempted to close TT, and 2 minutes later it finally closed. Instead of rebooting immediately, I went to IE to browse the web. A few minutes later the machine came screeching to a halt. No BSOD, just frozen.
I resigned myself to using the reset button. On the reboot, the machine started to load XP, then reset on its own back to the BIOS splash screen. I attempted to reboot normally, same thing. Last known good configuration, same thing. Safe Mode, same thing. So, XP is hosed. I loaded the System Recovery console and started looking around. Dir reports a problem enumerating directories on C:/. Chkdisk reports there are errors it can't fix.
View 14 Replies
View Related
Jul 10, 2005
Can I install XP on a hard drive which has only one partition with data without destroying the data?
View 2 Replies
View Related
Nov 18, 2005
I wanted to convert NTFS or FAT32 but my laptop don't have a floppy drive so I can not use the win98 or ME start up disk. I can not format my drive but I can use fdisk from the win98 cd.
View 5 Replies
View Related
Feb 17, 2005
I keep getting the following message errorloading C:winntsystem32msa64chk.dll. I tried to clear it by reloading windows xp but not only did it not change but now i have a corrupt file on some software. which says cannot find data base file or data base file is corrupt.
View 3 Replies
View Related
Aug 9, 2005
With W98/W95B you could easily use a tool to convert FAT16 to FAT32 from within windows and not lose the data (most of the time anyhow) that was on that drive/partition.Is there any tool to convert FAT32 to NTFS without wiping (formatting) the drive/partition? I haven't been able to locate any tools to do this with and so far have been moving/copying the data I want to save on a partition to another partition and then right clicking the partition I want to convert and choosing FORMAT to NTFS instead.
View 6 Replies
View Related
May 2, 2008
On a newish Asus laptop (Series A9Rp) and before using an included Conversion .bat file... I successfully restored this machine to it its original state, adding drivers etc from a third CD-ROM. I also, for the purposes of learning, restored it to a full installation using the hidden partition which appears to be located on C: drive After doing this I converted to NTFS.
View 14 Replies
View Related
Apr 25, 2006
using BT client, when one of the shared files was "corrupt or missing" so she turned it off, and reset the computer.
When loaded again the entire drives files when accessed gave the message that the files were "corrupt". (The drive is secondary ide master).
She restarted again but then windows would not load, she called me, i entered safe mode but as it was loading it gave the option to not load sptd.sys, i found that windows would hang halfway through booting when this file was run so i opted to not load it and enter safe mode.
I found sptd.sys was part of daemon tools which may interfere with nero (both installed on her computer). so i disabled the file and booted into windows successfully.
The "coprrupt" drive had some data on it, but 120Gb worth had vanished. i ran scandisk which crashed, so i tried some file recovery software (stellar phoenix) but that only found a couple of directories with minimal data in it.
There is only about a gig worth of really irreplaceable data, which i would like to retreive, im pretty sure at this stage that all is pretty much lost.
View 5 Replies
View Related
Aug 3, 2005
I have recently added a 160Gb Maxtor 6 P160PO drive in an external hi-speed USB housing connected via a 4 port USB-2 card. I have tried copying large amounts of data (13-20Gb) but after a few minutes, I get "The drive is not ready" and it disappears from My Computer. If I disconnect it and re-connect it, it will reappear. The same happended with a 20Gb drive I swapped in, so it seems that it's not the drive. I have tried a different port to no avail.
View 1 Replies
View Related
Sep 2, 2009
my parents pc was running super slow, like taking 10 mins to boot which it never use to, so i decided to format. All was going how it normally does when i fix computers and then it gets to 3% of formatting and suddenly jumps to 12 then gets to 100% really quickly and states format could not complete as the drive is corrupt, pick another drive.
So i restart try again same thing happens, ive tryed unplugging the cables etc but none of it works.
So i figure the drive must have something wrong, load the recovery console via the disk and trying do a chkdsk where i get the message
View 14 Replies
View Related
Oct 4, 2010
I have an EEE PC running Windows XP with the most recent updates and service pack. I think I got hit by a malware. All of a sudden yesterday my sound card stopped working, so I rebooted the system and now it won't start because "system32/DRIVERS/isapnp.sys" is missing or corrupt.The problem is that I don't have a CD drive in this computer and I'm not sure how to go about fixing this otherwise. I'd love some suggestions! I really do not want to have to erase it and start over.....that's a last resort as there's a lot of data that I need.
View 1 Replies
View Related
May 25, 2008
Had to replace the hard drive in my desktop and installed SP3. No problems yet. Any ideas on how I may be able to pull my files off the old drive? Can't get into it from My Computer although it does show up and shows there is data on the drive.
View 2 Replies
View Related
Jul 27, 2010
how can i recover my delete data after formet my drive
View 1 Replies
View Related
Sep 3, 2005
My hard drive just changed to fat32 for some reason and all the data is gone? Does anyone know what could be wrong, can I get my data back? When I start it up it goes through a check, ive left the check running and its been going ages, im not sure what its doing. Says something about lost clusters and truncated?
View 1 Replies
View Related
Jan 27, 2006
I got a 2nd hand lap top from my boss yesterday. Took it home last night and formatted the hard drive, then installed Centos and Linux over it. Got to work this morning to discover that my boss hadn't copied all his files over! I need to recover all his Outlook files.
View 11 Replies
View Related
Aug 24, 2007
My Sony Vaio had a file missing hal.dll file. A computer guy tried to use a boot disc to get the file and cant. Says my hard drives have crashed. And he cant do anythng because its a raid system and 2 hard drives.suggested i call someone to remove the data. its not backed up!!!
View 14 Replies
View Related
Sep 9, 2005
I am new to this site and I come here today to ask a question, perhaps someone here will be able to offer a bit of advice.I have a toshiba laptop, running xp pro sp2, 80GB hard drive.Hard drive inoperable due to bad sectors. My hard drive was partitioned into several sections with the C: section containing the os and the D: section containing my data. I could not boot my system so I tried reinstalling os on C: section again, it required a format. I formatted the C: section and then attempted to reinstall os, no luck!Using a third party diagnostic CD I see that my data on the D: partition is still available and intact. The diagnostic disk creates a makeshift os which allows for very limited manipulation of information on hard drive. Since I can not install os onto bad hard drive section C how can I transfer data from the section D: partition to either a new hard drive or to a storage medium?
View 3 Replies
View Related
Aug 13, 2005
I am running Windows XP SP2 with a Silicon Image SATARaid card running a 150GB mirrored volume. The fee space indicated by windows explorer indicates I have 19GB but when I add all the directory sizes together it only comes to 90GB. I have checked "Show hidden files and directories" and also ran a virus scan.I remember reading an article about how hackers can use disk on remote hosts and hide the data but have no idea how to check this, also I may be barking up the wrong tree.
View 4 Replies
View Related
Mar 13, 2007
My old hdd was used to run Windows XP Pro, where my profile was password protect and set for private. Since replacing that crashed pc with a new 1 that runs Windows Media Center I have been able to recover all except the data listed under my account's My Documents. When I scroll over it it says folder empty. When I click on it it says access denied (something like that). How can I retrieve this data. I tried some freeware I found online, but all it did was locate previously deleted files to recover. I want to recover stuff not previously deleted.
View 3 Replies
View Related
Jan 19, 2005
The harddrive is partitioned into an C: and D: configuration. However, when I try to access the D: drive, a message tells me the drive is not formatted. IT then tells me formatting will erase all data on the drive. My question is this; if I format D:, will I lose the Data already on the C: portion of the drive? I am trying to figure out if I need to backup everything on my C: drive before I format.
View 1 Replies
View Related
Jan 28, 2005
I Think After Reinstalling Windows Xp A Created A Partition, That Now Wont Let Me Access My Files. Is This Possible? Can They Be Accessed?
View 3 Replies
View Related
Apr 8, 2007
I have a computer that has a normal C drive with windows XP installed. I added a second maxtor drive for my data drive. It seems when I add my second drive to my windows xp system it causes XP to lock up with a big blue screen after a certain period of time. It usually is when I have intense drive activity when I am installing programs such as visual studio or some thing like that. Both drives are in the Windows XP NSPF format so I don't think that is the problem.I get tired of reinstalling Win XP everytime this occures.
View 8 Replies
View Related
Apr 1, 2005
The motherboard in my old HP computer died and I have got 40 GB worth of data on the hard drive that is still working.I got a new XP computer and added the old hard drive as a slave, to get the data out, but apparently the old XP program is locking me out. How do I get around this block, so that I can get onto the old data, to save it, and get it ready to be reformatted, for use in another computer?
View 7 Replies
View Related
