Gateway Laptop Refuses To Boot
Jul 22, 2005
I have a Gateway 7210XG Laptop which has worked perfectly since I bought it in January of this year. Until I allowed Norton anti-virus to install new virus definitions and application s/w yesterday morning. That install requested a reboot. I continued what I was doing instead of rebooting right away. When I was done I clicked on OK and the machine shut down. I can't be sure but I think I saw from the corner of my eye a message flash on the screen and it hung up.
View 7 Replies
ADVERTISEMENT
Jul 16, 2009
I've recently purchased an HP G50 laptop, and decided to wipe off Vista and install XP - I did this with a few laptops before, no problem. However this laptop is proving to be a real headache. It won't boot from the Windows XP install CD at all The furthest I get is at the "Press any key to boot from CD" prompt, then the screen stays black. I booted without the hard drive to see if this was causing the issue, but the problem persisted. The CD had no problem booting on 4 other machines. I tried a different CD and that didn't make the problem go away. The laptop will boot any Linux install/live cd I shoot at it, yet it refuses to boot the Windows XP install CD.
View 8 Replies
View Related
Feb 19, 2008
I have a Gateway laptop that won't boot up properly. Sometimes it will go to the Windows screen that has the bar at the bottom like it is loading and then it will just restart. But here lately it has been just going to the screen that asks if you want to start in safe mode and all the other choices. But it just locks up and won't go from there. I think that my hard drive is messed up. I just ordered a new hdd. Can I just change the hdd to fix it or is it something else?
View 2 Replies
View Related
Oct 1, 2008
Trying to fix this for a freind. Computer will not boot from hard drive. Needing to keep the data on the hard drive. Any other (easier) method than buying an adapter and installing the hard drive into another system to back up.
View 4 Replies
View Related
Mar 15, 2005
A friend of mine had me take a look at her gateway solo 1450 because she said that when it booted she would get a message stating the OS was not found. I looked at it, and it has booted every time but once (30 different boots). The one time it didn't the BIOS did not recognize the hard drive as being present. Its a tough problem because its very hard to duplicate the error.
View 1 Replies
View Related
Dec 8, 2005
Not to sure if I poseted in the right place or not. I'm currently working on a friends laptop and was hoping I could get some help here. She has a Gateway laptop running Windows XP. It is running very slowly. If you restart of shutdown there are always certain files that always pop up as not responding. These are the same files that show up in Task manager as not responding. Her Microsoft Antispyware icon when double clicked never starts the application. Here is a list of the files that always show up as not responding.
View 14 Replies
View Related
Nov 24, 2006
Out of 120gb, there is a 7gb restore partition, and only 2.1g is used. I have partition magic, can i reduce that partition to like 3gb so i have extra space? and.I also got a restore CD... what the? I am not sure why I need a partition in my HDD and a restore CD. Restore CD cant be the same as the restore hdd partition since it is way too small.
View 4 Replies
View Related
May 17, 2007
I have searched through this site and haven't found a situation that specifically addresses the issue that I am having. I am working on an older Gateway laptop that has all of the original installation discs that includes WinXP Pro. I am attempting to reinstall WinXP Pro onto this system to no avail. It continually stops w/ 2 minutes left during "Finalizing Installation" "Saving Settings".
View 13 Replies
View Related
Feb 8, 2009
I hope i"m doing this right. Gateway laptop MX6436. Suggested Max RAM 2Gig. I replaced the stock 512 module with 2ea. 1 Gig Modules, Nothing! I reinstalled original 512mb, normal operation. Removed 512 & installed 1ea. 1 Gig module, normal operation. Then added the added the 512 module, normal operation. BIOS confirms 1 and a half Gig's RAM. Why won't the 2 Gig's work?
View 6 Replies
View Related
Jan 25, 2005
I'm having problems with my computer and I need some help desparately. My machine is basically unuseable, and I need to get it back up and running as soon as possible, so any helpful input would be greatly appreciated. Appologies in advance if I'm a bit verbose, but I want to be as clear as possible.I'll start off by mentioning that not all of the info in this story might be relevant, and that I'm just telling it in the event that it could be. A short time ago I bought 512 MBs of RAM and installed it, and it seemed to work fine. Also around that time, presumably through running a registry cleaning utility or something, I'd accidentally disabled a lot of Windows XP tools like Defrag or the Search function in Windows Explorer (some necessary files were missing in the System32 folder).
Shortly after this (lets say 2 days) I decided it was about time I reformat my computer, or rather, start a new XP install on a 200gb HD I'd bought some time earlier but never really used. However, this HD had two FAT partitions on it with a Win98 install, so I run Partition Magic to repartition/reformat it into a single NTFS partition - however PM seemed to have trouble with this - though when I checked it later on a friend's computer with the Windows Scandisk, it was ok. Anyway, shortly after this point, Windows starts acting all screwy. I mean resetting without warning, left and right. It had always done this once every few days, and I never found a cause so I learned to live with it, but now it was doing it after 10 minutes of running XP.
That was all background information that may not be relevant - now moving on the the actual problem. Removing all HDs but the 200gigger, I try installing XP on it (with the intention of partitioning/reformatting it using the installer instead of Partition Magic). However, the install does not get past the initial stage with the blue screen, freezing at a line saying "Starting windows..." or something to that effect, after it'd scanned my comp. I try this several times, no dice, freezes at the same point.
Not having any ideas, I put back in my old 80GB XP HD. It refuses to boot. It gets to the point just before it shows the XP loading screen with the icon and freezes (I believe it's a horizontal bar of ascii blocks). So, I decide maybe to try installing XP on the 200GB using a friend's comp, and do so with much success (also reformatted and Scandisked it with no issues btw) - it boots fine on his comp and I was very much happy. I bring it home, and lo and behold, it won't boot - it gets to that same damn ascii loading bar. If I skip out on it with a reset, I do get the "Hey dude Windows couldn't load, do you want to start in safe mode or something?" sort of message, and nothing on that works. When I start in safe mode, it counts down to a file called pud.inf, or something like that (I'm writing this at work right now for obvious reasons, so I can't check it) - I'm assuming that's the last file safe mode loads up before running Windows. Basically, I can get to whatever is exactly before showing the graphical XP loading screen with the Windows logo - all my computer ever displays is made out of ascii text, no graphics of any kind other than the motherboard splash screen on bootup. The problem is probably with my computer and probably not the HDs, but what it is and how to fix it is beyound my understanding.
View 4 Replies
View Related
Aug 21, 2006
Rescue disk for Gateway laptop, A friend has a laptop thats about 18 months old and had a HD crash.He can't find his rescue disk. Anyone know what the Gateway policy is on getting a CD?
View 1 Replies
View Related
Jan 17, 2008
I bought a new 80 Gig HD for my laptop along with 2 of the adapters to connect the HDs to an EIDE cable in a desktop so I could Clone the Laptop HD to the new larger one. It goes through the motions and says completed successufully. But when I install the new HD in the laptop, I get an error "disk read error".Is it possible the new hard drive is bad even though the copy was done or am I doing something wrong? I have backed up my desktop HD many times using Ghost with no problems but this Laptop will not go.
View 5 Replies
View Related
May 14, 2009
I want to install xs in gateway laptop pls give procedure error coming no disk found.
View 1 Replies
View Related
May 14, 2009
I want to install xs in gateway laptop pls give procedure error coming no disk found.
View 1 Replies
View Related
May 20, 2010
Gateway laptop says there is no disk in the drive when i want to format it.
View 2 Replies
View Related
Aug 29, 2007
I bought a gateway mt6711 notebook bundled with win vista on it. i had to reformat it and install windows xp pro because vista is just buggy right now with the programs i'm using,I have succeeded installing the win xp pro, but i'm now in the process of looking for necessary drivers for my pc, and it's not that easy. i need help locating them. here are the ff hardware without any drivers installed according to the device manager.
View 12 Replies
View Related
Jan 25, 2009
I am trying to fix a Gateway MX3702 Notebook for a suitemate of mine. When it starts up, it loads the initial Gateway bootscreen, and then goes to a black screen for approximately 5-10 minutes. After that a loading bar appears across the bottom of the screen, and it takes about 30 more minutes to fully load. After that load XP starts up fine and there are no other discernable problems
View 2 Replies
View Related
Aug 13, 2007
I have a laptop that was given to me in bad shape. When I turn it on, it almost immediately freezes, even when not connected to the internet. This makes it impossible to run a virus scan or anything. My ? is, what can I do to fix this problem. Even if I have to lose everything on the computer, I don't care cause I want to start fresh with the computer anyways.
View 4 Replies
View Related
Aug 22, 2007
I am trying to reinstall xp on a friend laptop.. I have watched the post screen identify the hard drive, and then in the installation it says the hard drive cannot be found. It is pretty annoying.
View 1 Replies
View Related
Dec 6, 2008
I have installed XP on my sisters Laptop which is a Gateway Model: ML6228 because she did not like Vista on there. Now I was looking on the Gateway site for Network Drivers for this model and the only one they had was for Vista only, Network Downloads
D20053-002-002.exe - Windows Vista (32-bit or 64-bit) Broadcom Wireless Network Driver version: 4.102.15.61 Supports: Windows Vista (32-bit) Note: This file contains the Windows Vista (32-bit or 64-bit) network driver for the computer models and components listed below. English, Japanese, and Spanish installation instructions are included in the file.
View 3 Replies
View Related
May 22, 2007
The problem: Windows refuses to boot, even in safe mode.Symptoms: System POSTs fine then hangs when windows kicks in. I've tried all the options when the 'windows failed to load properly' comes up, but they all hang. When I tried it in safe mode a list of drivers appears to be loading but then it gets to /mup.sys and it hangs there.Recent changes to system: Yes and one is undoubtedly the culprit, as this install of windows has been running flawlessly for over 2 years. Today I made two changes to the system....and in all my wisdom I made them both at the same time, although I'm pretty sure I know what screwed it up. I flashed the BIOS to the latest revision, upgraded the processor to a Athlon socket 939 x2 +4200 (from a single core +3200 I think) AND installed a small external SATA port (I think this screwed stuff up).The BIOS upgrade went smoothly and took place a few hours and reboots before the processor change in eSATA bracket install, so I don't think it's to blame.The processor install also went off without a hitch and the computer not only recognized it correctly, but the first boot was fine and went to windows. During this first boot I got the 'installing new hardware' little picture in the lower right hand part of the taskbar, but was never prompted for drivers.
View 2 Replies
View Related
Oct 15, 2007
I tried to install the Recovery System, from the original disc, onto a 2-year-old Gateway laptop, but appartently the TrayApp file (whatever that is) on the disc is corrupted. I can't get a new disc because Gateway no longer carries them. What else can I use? Can I buy a Windows XP (the original OS) update and install that? Can I use the recovery disc from another brand of computer, like Dell?
View 3 Replies
View Related
Oct 20, 2009
My grandmother bought a crappy old gateway laptop with XP on it (for 3 times what it was worth) from some guy she met. The whole thing was screwed up and practically unusable when she got it so she asked me to fix it. I already set up a working admin account and made it so it can do basic functions and everything last week. I've spent a lot of time on the microsoft websites help section trying different methods to fix different problem, finally got it to work with internet. But, assuming there are two versions, I think they installed the desktop version of WinXP on it.. It doesn't have any of the normal differences an XP laptop has vs an xp desktop, like it has no battery reading, and refuses to acknowledge it's a laptop and has a battery thus refuses to charge the battery, so it must be plugged in to work. I don't know the first thing to how to fix that. Also, I'm pretty sure these things come with wifi, it's not that old, it's a M405 like this one. It has no indication of capability to connect to wireless internet, so I have to keep the ethernet cable in at all times too.IE fails and as soon as I got it connected to the net 1000 popups started coming up, and it kept freezing going to websites and I kept having to ctrl+alt+del it, so I got safari and it's working a lot more smoothly.
View 5 Replies
View Related
Oct 26, 2009
I got blue screen of death on my laptop and it keeps on restarting before the window can actually boot up. It show's this message and reboots every single time when starting up Windows XP. I tried recovering the windows from the Recovery CD but it goes to the Gateway Symbol n freezes there and I have to restart the system every single time and try to boot from the recovery CD. it goes searching for recovery date on the hard drive and if not found any it will boot the recovery cd. but it goes to this scan and just freezes there with running the recovery data from the cd.
View 1 Replies
View Related
Apr 11, 2008
I've looked around and I'm having a hard time finding good info on this. I've looked up stuff like slipstreaming SATA drivers into the windows disc, but I don't think I'm doing it right. I got the correct SATA drivers from gateways website. I'm pretty sure this system just uses the intel SATA Chipset. Any way if anyone could help me install XP on my Gateway C-141XL laptop without having a floppy disc I'd really appreciate it.
View 2 Replies
View Related
Oct 20, 2009
I started facing a problem recently with my 3 years old laptop GATEWAY MX6453.
I have looked in the forum, but couldnt find someone with the exact problem.
My laptop suddenly started to freeze (temporarily) when I try to load any application. The freeze time could take 2 to 5 min (while the hard disk led is lit solid). I cannot hear the hard disk sound during this freeze. I could move the mouse but cannot click on anything. It just stops responding for about 5 min before the application loads and works normally.
View 9 Replies
View Related
Dec 31, 2006
I've read similar posts on this subject on the net and on techguy, but I've never found anything that seems to work.I have a Gateway computer running MS XP media center edition Operating system purchased sometime around the summer of 05.It had been running perfectly fine, well, almost perfectly fine, until just recently it decided that it did not want to start up. At first it was internittant and could be solved by turning the computer on and off along with playing with the powerstrip, now these methods have failed tend the computer refuses to boot up at all
View 14 Replies
View Related
Apr 29, 2006
Gateway desktop which I used for like 2 weeks with no problems. Now I can not even boot up. I've tried to boot up in safe mode & all the other options with no luck. I do not have the XP disks from him either. I am also not able to get to a command prompt.
View 10 Replies
View Related
Nov 12, 2009
I have what I perceive to be a big problem with my pc. I somehow deleted the necessary files to boot the computer. I have tried to boot in safe mode, but when I get to the screen to boot in safe mode and hit enter to boot it goes back to the gateway screen.
View 9 Replies
View Related
Nov 5, 2007
I have a HP ze5568cl laptop (Windows XP SP2). For a few years we've had trouble with the power connector. We've just wiggled the power cable to keep it connected and lived with the problem. It also gets very hot and the fan runs constantly. Yesterday when I powered it on there was no power, absolutely nothing. My husband has some electronic knowledge so we took the laptop apart and he soldered the loose part of the power connector. While he was doing that I cleaned the fan (couldn't believe how much dust was in there.When we plugged in the power cable the orange light came on so we were excited. When we powered it on all the keyboard lights lit up so we thought we had fixed the problem but.that's all it did. It went no further except that the fan kicked on.There is a clicking noise coming from the cd drive about every second with the green light flashing. I suppose it is checking to see if there is a bootable cd in the cd drive. I have attempted to change the boot order by holding F1, then F2 but it still continues to try to read the cd drive. I can't get to the screen that will allow me to change the boot order.
I also put the OS disk in the cd drive, hoping that it would start with the disk but it just clicks. Hubby removed the cover of the cd drive and I could see that the cd is spinning.There were no problems with this laptop prior to the power problem. It was really working very well especially considering the age of it.
The information in my sig is not for the computer with the problem. It's actually for an old computer which my son now has at college.
View 11 Replies
View Related
Jan 19, 2006
When I try to boot up my compy, and I get to the Windows XP loading screen, it looks like it's doing stuff, but then it restarts my computer. I'm on a LiveCD right now. When I try to do Safe Mode it restarts at Mup.sys. Any ideas on why it's doing this?
View 14 Replies
View Related
