A diskette drive 1 seek failure on my 2nd computer.I can't seem to get it to boot up normally.My boss recently had a dvd player installed by a salesman for a separate running program.Restarted the computer and I was offered 2 options:F1 to skip setup which won't work and F2 setup utility my only option.Not sure what to do at this point.
View 9 RepliesWhenever I try to use certain programs I get a Bad Image error message. Something like, 'The application or DLL C:Programs FilesACD SystemsBCGCBPRO64.dll is not a valid Windows image. Please check this against your installation diskette.' The first time I got it, I ran a Google search on it and it told me to insert my Windows XP disk and type scannow into Run. This worked the first time, but now a get this error message popping up on several other programs and the scannow thing doesn't work.
View 4 Replies View RelatedI lost my recovery diskett to my laptop. my daughter dropped the laptop and now it is giving me a error msg at start up and i can't get it started at all. say something about disk writing error. anyway.how use the recovery diskett? but i can't find mine.
View 7 Replies View RelatedDell 8400 desktop..On bootup, the Dell logo screen appears and goes to a 'dos-like' screen advising: Floppy diskette seek failure, strike F1 key to continue or F2 to run Setup Utility'.I get no response from F1 other than a beep. F2 brings me to the setup menu, but can I get to safe mode just in case my 5.5 yr old computer is about dead? Dell just replaced the motherboard & power supply in Oct after that quit working after a surge protected power outage. I don't have many personal files on the C drive other than my iTunes & my email
View 4 Replies View RelatedI recently installed a new hard drive into a friends computer and installed XP Home.
I ran all the updates and service packs.
I left later that day and let him install all his applications.
I got a call tonight from him saying he really screwed up and doesn't know what to do.
I had to follow his thinking over the phone so I hope I get this all correct.
He had trouble loading the drivers for his HP printer. He would get an error saying that a C: empHP_WebRelease folder was missing. He did manage to figure out that for some reason when I installed XP it called the Boot drive "I" instead of "C"
I have an old HD From a system that I got rid of. I want to put it into a friends system to see if I can retrieve the files off of it and put it onto my external HD. The hard drive was the boot disk and the computer I am installing it on has it's own boot disk. If I boot up with two boot disks will there be a problem? Is there anything I need to take into account before doing this? I am planning on installing the old HD onto an ATA cable that I unplugged from the DVD drive. The HD that is in this system is not on an ATA cable, I'm not sure what it is connected to, just a small plug with a blue cable going to the mother board.
View 3 Replies View RelatedI am try to two partition drive C and drive D in my computer but only one c or d instoling. i have 4000mb hardrive,please tell me how can i instol partition in my window xp professional.
View 1 Replies View RelatedI have a dual boot system (2 hard drives) booting Suse and XP and boot up through Suse's built in boot manager which gives me the option of booting to Windows or Linux. But since I barely ever use Linux I want to delete it off the 2nd drive so I can use it for a storage drive, so I'm wondering how to replace the Windows Master Boot Record so I can just boot into my XP drive. I'm scared that once I delete/reformat the contents of the 2nd hard drive (I'll probably use Partition Magic to do this through my XP drive) that I won't be able to boot XP up anymore. So before I do anything I want to just be able to boot into XP and bypass the linux drive before I delete it to make sure everything is ok.
View 2 Replies View RelatedI have a HP ze5568cl laptop (Windows XP SP2). For a few years we've had trouble with the power connector. We've just wiggled the power cable to keep it connected and lived with the problem. It also gets very hot and the fan runs constantly. Yesterday when I powered it on there was no power, absolutely nothing. My husband has some electronic knowledge so we took the laptop apart and he soldered the loose part of the power connector. While he was doing that I cleaned the fan (couldn't believe how much dust was in there.When we plugged in the power cable the orange light came on so we were excited. When we powered it on all the keyboard lights lit up so we thought we had fixed the problem but.that's all it did. It went no further except that the fan kicked on.There is a clicking noise coming from the cd drive about every second with the green light flashing. I suppose it is checking to see if there is a bootable cd in the cd drive. I have attempted to change the boot order by holding F1, then F2 but it still continues to try to read the cd drive. I can't get to the screen that will allow me to change the boot order.
I also put the OS disk in the cd drive, hoping that it would start with the disk but it just clicks. Hubby removed the cover of the cd drive and I could see that the cd is spinning.There were no problems with this laptop prior to the power problem. It was really working very well especially considering the age of it.
The information in my sig is not for the computer with the problem. It's actually for an old computer which my son now has at college.
I bought a computer for my wife and kids. Well months go by and my wife tries to install something and notices that the MAIN drive is H: not C:
I figured that it was weird but no big deal. Well I purchased a printer for her and while trying to install the software it was giving me a "Windows - No Disk in Drive" error.
I did some research and spoke to HP tech support and they suggested that I search the web for a way to change the drive letters from H: (current hard drive) to C: (supposed to be default drive)
I had a drive that was beginnning to squeal and i figured I could disable my drives one at a time to see which one was squealing. Of course, disabling the drives through the control panel doesn't actually keep them from spinning, so the whole thing was an exercise in boneheaded stupidity. Anyway, as soon as I disabled the c: drive the screen went blank (of course), and now when i try to reboot it complains about a non-system drive and asks me to insert a system disk. did I mention that this is a home-built system and it doesn't have a floppy, so i can't boot off the floppy? I tried booting off the XP install CD, but it won't except that either (this seems odd to me).
View 1 Replies View RelatedI installed a Serial ATA hard drive. Booted from floppy,partitioned and formatted 120mb HD,with 2 partitions.
Connected my old IDE drive and booted from Norton Ghostdisc, cloned my old drive to the new one. Removed all drives and USB card readers except the new SATA drive. Windows will not fully boot, it halts at the blue Windows intro screen. Restarted Windows, and scandisk ran, but indicated drive letter "H" not "C", so I guess the windows installation is still looking in the original place for it's files, ie. the "C" drive, that's why it won't boot. You cannot change the "System" drive letter from "Computer Management" within XP, and I cannot get into Windows anyway. Is there a "work around" for this, other than a clean install? Even then, is it still going to be drive "H"? And that means another Windows activation. How many goes do you get for activation? I tried a windows repair installation, and reactivation (wasted). Windows then worked, sort of. Lots of things were missing and programs unuseable,as they were looking for their files on "C": so I went back to square 1, put my old drive back in for the moment
I have a dual boot system with both having windows xp.When I load into the 1st XP installation, the following is the list and assignment of the drives:
C : Local Disk (contains the 1st XP installation)
D : CD Drive
E : Local Disk (contains data and also few installed program folders)
F : Local Disk (contains the 2nd XP installation)
Initially when I noticed this drive arrangement after setting up the dual boot, I just left it as is, not knowing what to do.But nowadays I am having a lot of problems as the installed programs are not accessible because their target location keeps changing, everytime I keep switching between the two operating systems.How can I solve this problem?Can I do the follwing : Load into the 1st XP installation, and then change the drive letters (of the last three drives) such that they are matching the drive assignment as seen when loading into the 2nd XP installation.Here in a way I have kept the same drive name for both installations.But Will this work?I also have some of the program folders for the 1st xp installation stored in E drive, and after changing it to D drive, will all the links be properly converted upon restart?
I have successfully cloned my primary c partition of a dual boot system with XP Pro on the 1st primary partition c: and XP Pro on the 2nd primary partition as d: I can boot into my XP on the c: drive with no problem, but when I attempt to boot into my XP on the D drive it hangs on the blue screen right before booting into the user profiles. And believe it or not it continuously loops making the windows startup sound and the shutdown sound. It does the same in safe mode. I will try to explain the process on what I did so it can help you experts figure out this dilemma that I'm having. My old drive an IDE 100GB IBM primary drive was partitioned into 3 parts:
c: 30GB FAT32 primary
d: 30GB FAT32 "
e: 30gb FAT32 "
All ran great in XP's on c: ,D: and :e except that i was running out of room in all the partitions and the drive is getting very old , I think (5yrs). I used XXClone Pro v.0.58.0 to clone my old c: and d: partitions to a WD IDE 160GB. I tried many other cloning proggys like Acronis True Image, Drive Clone, Paragon Drive Copy, Drive Image 2002, HDClone 3.1 Pro but they all either changed my new drive NTFS file system to FAT32 or made exact same size copies. I formatted and partitioned my new drive as follows:..............
I had voltage fluctuations last night due a snowstorm and the voltage dropped crashing my PC.It now won't boot and gives the error that a file is corrupted.Windows/system32/config..The PC runs an OEM XP home edition on a SATA drive, the PC also has an IDE drive (D) but the OSes are on the C drive.Inside the XP installation I have Linux Mint installed.When I boot I get the 2 options I always used to , XP (default) and Linux Mint.XP won't boot when selected and gives the error above.The Linux Mint, also on C and in fact installed as a program within XP, will boot, hence I believe the SATA drive to be undamaged.I can see the C drive and all the XP files from the Linux installation.I've tried using the original full CD and the recovery console but when the recovery console opens all it can see is the IDE drive which it labels D (and of course doesn't contain the original XP install.I can't remember how I got XP on the SATA drive in the first place, I don't appear to have any Hard drive drivers in the case I keep all software CDs in and I'm a bit flummoxed. I can only imagine I just fitted it and loaded the XP install disc but that's at odds with what seems to be happening now.Spent a large part of today Googling but can't find anything that will fix this. so far.I don't want to have to wipe and re-install everything unless there's no option, it's a fast way to kill a couple of days over the holidays.
View 8 Replies View RelatedI'm running Windows XP and want to migrate to another hard drive. I used the excellent open source utility CloneZilla to clone my hard drive to the new drive, and used the equally excellent EASEUS Partition Master to resize the cloned partition to fill the new drive. Next I edited boot.ini on my original Windows to add the cloned drive as another boot option. After a bit of trial and error guessing the disk path for boot.ini I was able to dual boot into the original or the clone.
Now I want to boot off the new drive directly without dual booting off the original drive as I intend to wipe the old drive after I am satisfied that everything is working OK. But here's the catch: the original drive is SATA, while the new drive is IDE. So I can't simply swap the cables around and be done with it. So I configured the boot sequence in the bios to use "HDD-0" instead of "SCSI" (for some reason this old BIOS thinks SATA is SCSI) and restart. The system gets as far as detecting the boot source (floppy first, then CD-ROM) and then stops. No "operating system not found" or any other kind of error, just a blinking cursor and no activity.
I get exactly the same behavior using "HDD-1" to "HDD-3" as the boot drive in the bios. The bios detects the drive itself OK. I have also edited boot.ini on the new drive to point to the same location I used to add it to the dual boot menu on the original drive, but that didn't help. I also booted off the Windows installer, went into Recovery mode and ran Fixmbr and Fixboot with the original SATA drive unplugged and without specifying a device name.
I'am using xp with service pack 2 i am using p4 2.8 ghz with 1024 ram maxtor 80gb hdd when i start my pc the logon screen does not show up if there is a cd/dvd on my dvd drive if i remove the dvd then restart then it's fine
View 12 Replies View Relatedi want my pc to boot off my dvd or E: drive
when i go to the boot sequence it says that it is booting off of the D: drive, which cant read dvds, and i dont know how to add drives to the boot sequence
i need i to boot off the dvd drive because i have linux on a dvd and need to boot it, then partition my hdd, then install the actual OS.
For whatever reasons I cannot set the BIOS so that the computer boots from the CD.What I did was:
1) Select the boot menu
2) Select the CR ROM device ( which shows in white letters )
3) Press ENTER,now it indicates : 1. 1st Master : SONY DVD
4) Press F-10,then it is asking for save configuration
5) Select yes and press ENTER
The problem is that when I start the computer it does not boot from the CD.Can anybody tell me how it is done ?
I just upgraded to a 300GB hard drive from a 250, which I will use as a backup drive. However, when I set it up, the primary boot partition got set up as D:. I have 5 partitions on this drive. The others were also mislabeled, but I could change them with the Computer Management tool. There is no C drive on this system. I want to make what is now D become C.The original also had 5 partitions. All I wanted to do is duplicate the old drive to the new one. Somehow, the boot partition became D and I can't change it from within Windows. Is there a way to do that? I have created the UBD for Windows using Bart's PE, so I can boot the machine independently of using the hard drive. If I can use that, is there a tool there or a command line program I can use to change it?
View 2 Replies View RelatedI recently purchased a new hard drive and used the software that came with it to set up the new drive as the boot drive and the old drive as the slave. However after installation, it still shows the old drive as the boot drive and the new drive as the slave.I have set the jumpers to "master" on the new drive and slave on the old drive. Is there any way to change this? I dont know what else to do siince the jumpers are set correctly. running winXP home with Dell Pentium 4.
View 4 Replies View RelatedI am having problmes booting my laptop. Normally for my desktop I'd just pop in the CD and boot from disk, but with this computer it isn't that simple.
My computer: Sony Vaio VGN-x505ZP
My OS: Windows XP Pro
The Problem: When I restarted my computer at one point (after trying to clean off some spyware) it told me a file was missing or corrupt: <windows root>system32hal.dll
A friend of mine's computer has three hard drives. The one designated as her C drive is an 8gb thing. She has a 40gb drive along with another 30gb one. In her cmos setup I couldn't get it to boot with a drive besides that which was designated C So can I just copy and paste all the stuff in her C drive into another drive but how would I get windows to boot off of that drive instead??? She has XP home
View 3 Replies View RelatedI have a notebook computer which the hard drive is dodgy in.I have restored to the HD and after a while it Windows XP corrupted again. I don't want to spend any money on it but I would like to keep using the computer so I looked at swapping the HD with another HD (from a USB case) but one was SATA and the other PATA.So the only option left (short of spending money) is installing and booting from the USB drive? Is this possible?
View 2 Replies View RelatedI am trying to upgrade the hard drive in a Thinkpad x60 laptop. I have a WD 120 gb SATA drive that I have tried to install with the Data Lifeguard tools. This does give you an option of installing the new drive as the new boot device, which is what I used. I did the installation with the drive attached to a USB port and an external enclosure.I have done this before with desktops without any problems. For this go around, the files seem to be copied correctly but the drive won't boot. I just get a blinking cursor. The drive is recognized when I attach is as an external drive.
View 11 Replies View RelatedI have a laptop here with an apparently dead CD drive, that needs a fresh OS load. Has anyone ever successfully loaded XP from a USB jump drive. I don't want to boot XP from the jump drive, but rather want to install it to the systems hard drive, using the usb jump drive.
all advice appreciated. If there is no method to do this, how hard is it to set it up to run over the network. I have imaged my XP cd to a .iso file. Can probably convert it if need be...
When the system boots into the new drive R:, it still wants the boot partition c: for something. If I boot with the IDE disconnected, it'll boot to the login screen, and allow me to log in, but after a few minutes of a blank screen & cursor, it drops back to the login.
I have PartitionMagic 7.0, and used DriveMapper to change all references to C: to R:, but that didn't do it. How do I cut my system's dependence on the failing drive, before it fails altogether?
I just bought a new hard drive today (120 GB Fujistsu) for my laptop computer. I installed it, and I am now trying to boot Windows XP onto it with the CD-ROM. But for some reason, the CD is not booting up and my computer keeps saying "Operating System Not Found." I tried changing the boot order from the hard drive to the CD-Drive, but that didn't help either.
View 3 Replies View Relatedwe have an XP box at work we use for testing custom apps we create...we threw in an extra drive and put Vista on this drive just to test out our apps...after testing, we removed the drive (and hence Vista) leaving just the main drive with XP...our boot options still list Vista as a boot option..i know fixmbr works with XP, but there is another command (can't remember what it is, never used it) for Vista...using XP, can i use the fixmbr command to remove the Vista boot option? if not, how should i remove the second boot option from XP?
View 7 Replies View Related800 MHz processor PC with 256MB RAM and a WD hard drive. She runs Windows XP Professional on it. She walked away from her computer for awhile, and when she came back there was a black screen on it saying basically that it couldn't find any of the devices that are actually attached to the computer i.e. hard drive, CD-ROM. It also said boot record not found. So I decided to have her try the Windows Recovery Console to try and help fix the boot.ini file. Well, when she typed in the command, it didn't work and said invalid entry or system drive not found.
View 2 Replies View RelatedWin XP Sp2, Dell 4100, HD 200gb. Bios boot order HD,CD,Floppy. After receiving msg.."Invalid Boot Diskette", "Insert Boot Diskette in A:" Ctrl-Alt-Del now boots system from C: This as a result of a motherboard failure and rebuild of C:
View 10 Replies View Related