Changed Drive Letters, Computer Won't Boot
Sep 30, 2008
I was attempting to back up my hard drive to an external hard drive. The program (Norton Ghost 14) wasn't recognizing the drive. The Norton tech. helped me determine this was because under Disk Management there were no drive letters next to the drives. It showed a small partition on my primary drive, my primary drive, and my usb connected external hard drive, but none had drive letters next to them. I attempted to change their drive letters. It did something, but the letters still didn't show next to the drives. After this, everything disappeared on my desktop. I then rebooted and couldn't get to the login screen.Right now, when I start my computer I get the Dell bios revision screen, then the black MS Windows XP screen, and then the blue XP screen. Everything looks normal except that it stops short of the login area. My guess is that by changing the primary drive letter that my computer now cannot find anything because it appears the C drive is missing.
View 8 Replies
ADVERTISEMENT
Oct 31, 2007
my old boot drive was g: .. i followed this guide here and changed it to c:upon restarting .. the system doesn't load up .. it gets stuck on the Welcome screen and that's it .. am i screwed?
View 5 Replies
View Related
Jan 6, 2009
I have an older Sony Viao desktop. Today I thought it would be a good idea to change the drive letters around in the Computer Managment utility that comes with Xp. So I have 3 physical drives, one of them is external, and I tryed to take the two Cd/dvd drives and move them to the bottom of my drive list by disableing them, then going to the Computer Management Utility, right clicking on my Local H drive, and selecting Change Drive Letter... Did that, then went back to the device manager, enabled my two cd/dvd roms, and everythign seemed to be in order... LOL! Until I restarted my computer. Now windows wont boot up. Wont boot from MY copy of Xp, and to top it off, the bios freezes as sson as I hit any key.
View 5 Replies
View Related
Sep 14, 2005
I have an older Sony Viao desktop. Today I thought it would be a good idea to change the drive letters around in the Computer Managment utility that comes with Xp. So I have 3 physical drives, one of them is external, and I tryed to take the two Cd/dvd drives and move them to the bottom of my drive list by disableing them, then going to the Computer Management Utility, right clicking on my Local H drive, and selecting Change Drive Letter... Did that, then went back to the device manager, enabled my two cd/dvd roms, and everythign seemed to be in order..Now windows wont boot up. Wont boot from MY copy of Xp, and to top it off, the bios freezes as sson as I hit any key. So Im hoping someone can help me with this problem, because I have lots of important data on that machine that I need access to
View 5 Replies
View Related
Feb 15, 2008
After a reconfiguration of boot loader in suse Linux two of my drives swapped their drive letters in WINDOWS XP SP2 (weird) now i can not reassign the drive letters as the disk management utility in control panel fails to start and gives error " service execution failed".so can u suggest any third party windows based software for achieving the task i have searched the internet and found nothing
View 4 Replies
View Related
Jun 8, 2005
I recently did a format/reinstall of XP and I've found that my drive letter's have changed. It is set up in the following way:What I want to do is make the HD (personal) D:, the way it was before the format. Now I've gone to START->PROGRAMS->ADMIN TOOLS->CPU MANAGEMENT->Disk Management but I can only change the letters of my harddisks and the external drive there, and D isn't an option for the second HD (second partition, technically); presumable because the DVD-RW is using that letter.
View 10 Replies
View Related
Nov 8, 2004
I have just installed windows XP on the PC i am writing from and because i foolishly had a camera card reader plugged in and a seperate USB hard drive connected the installation has jumbled up the drive letter allocations.For example what would traditionally be the C drive has the letter F.
View 10 Replies
View Related
May 29, 2006
After reformating my pc, my secondary hard drive is now designated as drive "D". Before the reformat it was drive "G". I have software that needs to get data from drive "G" but the drive is not designated as "G" any longer. I can't remember how to reassign the drive letters so that I can designate the secondary drive as "G".
View 2 Replies
View Related
Nov 21, 2007
I just formated one of my servers to discover that local disk is not E: instead of C: , i tried to change it back, but it will not let me since it is the boot device?
View 2 Replies
View Related
Sep 13, 2009
I just bought a WD 1 TB to replace 120 GB slave (it was 'c:') I had. I intended to still use it as a slave and keep my 320 GB (it was 'd:') as the master. They're both SATA's so of course that doesn't matter so I just kept the 320 set as the primary in BIOS.At first boot up the computer started fine but when it started Windows the previous devices hadn't been loaded and I was asked to register again before starting. I re-registered and clearly all the previous settings are gone
View 2 Replies
View Related
Oct 8, 2008
I recently installed a new hard drive into a friends computer and installed XP Home.
I ran all the updates and service packs.
I left later that day and let him install all his applications.
I got a call tonight from him saying he really screwed up and doesn't know what to do.
I had to follow his thinking over the phone so I hope I get this all correct.
He had trouble loading the drivers for his HP printer. He would get an error saying that a C: empHP_WebRelease folder was missing. He did manage to figure out that for some reason when I installed XP it called the Boot drive "I" instead of "C"
View 1 Replies
View Related
May 25, 2004
I installed a Serial ATA hard drive. Booted from floppy,partitioned and formatted 120mb HD,with 2 partitions.
Connected my old IDE drive and booted from Norton Ghostdisc, cloned my old drive to the new one. Removed all drives and USB card readers except the new SATA drive. Windows will not fully boot, it halts at the blue Windows intro screen. Restarted Windows, and scandisk ran, but indicated drive letter "H" not "C", so I guess the windows installation is still looking in the original place for it's files, ie. the "C" drive, that's why it won't boot. You cannot change the "System" drive letter from "Computer Management" within XP, and I cannot get into Windows anyway. Is there a "work around" for this, other than a clean install? Even then, is it still going to be drive "H"? And that means another Windows activation. How many goes do you get for activation? I tried a windows repair installation, and reactivation (wasted). Windows then worked, sort of. Lots of things were missing and programs unuseable,as they were looking for their files on "C": so I went back to square 1, put my old drive back in for the moment
View 2 Replies
View Related
Jan 22, 2006
I bought a computer for my wife and kids. Well months go by and my wife tries to install something and notices that the MAIN drive is H: not C:
I figured that it was weird but no big deal. Well I purchased a printer for her and while trying to install the software it was giving me a "Windows - No Disk in Drive" error.
I did some research and spoke to HP tech support and they suggested that I search the web for a way to change the drive letters from H: (current hard drive) to C: (supposed to be default drive)
View 14 Replies
View Related
Dec 15, 2008
the hard disk partitions shown in the my computer folder usually have a name as well as drive letter associated with them.today as i opened my folder the name of the drives along with the folders cd rom n floppy disk were missing.when i select a drive the information shows up in the left hand pane
View 4 Replies
View Related
Sep 26, 2008
I was infected by a virus while changing to a different AV software. After a full day of cleaning, I have a perfectly usable and clean computer, however, my c: and d: drives are not displaying in my computer.They are listed in device manager, disk manager,and I can access programs off of them c: is my boot drive just nothing in my computer.I was able to create a shortcut to both of their root directories so I can browse them. All windows programs show them as viable drives and will browse, so this is more of a nuisance than a dire situation, however, it is a bit crippling.
View 4 Replies
View Related
Jan 3, 2006
I have Windows XP Home Edition, SP2 on two separate bootable hard drives in my Dell XPS B1000r. I have my 80 GB �main� hard drive and a 40 GB �extra� hard drive. I mainly boot from my �main� 80 GB hard drive, and that�s the drive that won�t boot after I changed the drive letter.
I wanted to rename the Drive letters associated with each of these hard drives. I was able to change the �extra� hard drive using the Disk Management option. I was not able to change the letter of my �main� hard drive, because I booted from it. I used Regedit to change the boot drive letter, based on the Microsoft Help & Support article:
http://support.microsoft.com/default...;EN-US;Q223188
View 3 Replies
View Related
Mar 21, 2010
I installed a new hard drive, the only drive, in my computer and installed XP pro. There was a card reader in the computer which was assigned c drive and the local drive was assigned h on the disk. I disconcected the card reader and changed the local disk to c from h in the registery. Now when I turn on the computer the blue screen introducing XP comes on and goes no farther.
View 3 Replies
View Related
Jun 14, 2005
The Hard Disk Drive Icons in the "My computer" folder changed from an XP look and feel to a Win 98 look and feel. I right clicked on the Icon but I cannot change from there. Does anyone know how to change back the icons?
View 6 Replies
View Related
Aug 27, 2005
I cannot find out why the partition drive letters are not showing up in disk management but are showing in "My Computer". I can view directories and file in explorer but links and commands do not work because they can't find the paths.
View 1 Replies
View Related
Dec 5, 2007
When I open My Computer by double clicking from the Desktop, my 4 drives C/D/E/F are displayed in the right window pane. Now when I try to open the D or E drives by double clicking the Drive letters, i'm unable to open the drives. Whereas with the same procedure i'm able to open the C and F drives by double clicking. When I right click my D and E drives. I'm seeing that the Explore and Search options/attributes are missing and in that place I get to see some junk characters displayed, and rest of the other options/attributes are displaying normally.
View 8 Replies
View Related
Jun 24, 2005
Correct me if I'm wrong but I was under the impression that hard drive letters were assigned each time the machine booted up & only c & d were reserved for the operating system & CD/DVD drive & if the number of drives altered from one boot up to the next these letters could change. The reason hat I ask is that I changed an internal drive which had several partitions on it only to find that this drive isn't recognized, but even though it isn't recognized by My Computer or disk management the other partition are labeled as if this were listed.I now don't have a an 'e' & 'g' drive listed. But I do have a 'J' & 'k' listed. Where is my other drive 'e' & 'g' & how do I get to use the data on them.
View 6 Replies
View Related
Jan 4, 2007
Hardware:
IDE drive; SATA drive; misc USB drives and card readers p4 (2G) Foxcon board (w/ SATA support); 2G Ram...
Software:
XP Pro SP2; Partition Magic 8; (& misc apps)
I bit the bullet and reformatted my hard drive after problems with a corrupted W98 partition. (My testimonial to XP is that w/ W98 I did this sometimes twice a year or more; I've run XP without having to re-format for over two years.)
View 3 Replies
View Related
Dec 15, 2004
I have no idea why but I have an issue where my brother's computer after a clean install of XP from 98 exchanged ID letters. Drive "C" is now "F" and the Zip drive is now "C". It may have been something to do with SP2 which I removed. Windows won't allow me to change the hard drive back to "C" even after I made it available by designating the Zip as "H". Trying in Safe mode did not allow the change, nor did Partition Magic change it. "C" was added to the name but I could not change it from "F". I already started over and reinstalled XP but it still came up "F" as the hard drive. Things work after the second install where the drives quit after the first half-way into re-loading programs. Now it is just a pathway issue. What else can I do short of starting all over? Is there a way to change the hard drive designation? Any help would be appreciated
View 4 Replies
View Related
Feb 10, 2007
Can you reassign a drive letters to a second hard drive, cd/dvd drive? I seem to remember something about that in XP but can not recall what it was I read.
View 7 Replies
View Related
Aug 1, 2005
At work we have so many network drives and in a recent upgrade to xp, the drive letters are showing up at the very end of the drive description. In certain applications, you only get to see a short portion of the beginning of the drive info and with the complex naming schemes we have, it is difficult to remember what's what and hard to tell the difference with just the beginning showing. It's very easy to remember what we've designated as K or N or P for example. Any way to switch these letters back to the beginning?
View 5 Replies
View Related
Dec 3, 2006
I'm trying to play Diablo II: LoD, which requires that the LoD expansion CD be in my CDROM drive. I mounted an image of the disc with Daemon such that it's in (virtual) Drive E: (normal CDROM drive is D:[b][/b]). But the game seems to only be checking my D: Drive for the disc, and it won't let me point to the E: Drive.
Is there a way to just switch the drive letters around, and if so, do you think this would even solve my problem? Perhaps there's a way I can just set E: as my default CDROM drive, so that the game would check there?
View 3 Replies
View Related
Aug 4, 2005
I recently had to reinstall windows XP to get rid of spyware. When I restarted windows, I noticed that my drive letters were not right. For instance,my hard drive is letter (H) instead of C. My floppy drive is correct (A). How do I change the letter back to C for my hard drive?
View 6 Replies
View Related
Jun 3, 2008
I created a new partition and installed Windows on it a while back, but when I booted up, it had the letter G and my other partition that I used to store music was drive C.I was going to change drive letters around so that my OS was on drive C, but I was wandering if this would mess up any applications I have on the system?
View 4 Replies
View Related
Jan 30, 2005
i feel that this is probley simple... but I don't know how to do it. I've right clicked directly on the dvd-player to see if I could change it and nothing is there. My dad has a dvd-player F: and a cd-rom drive E:, His computer was formatted recently, but now the software for each of the drives are mixed up. Putting a dvd in drive F:, tells us that drive E: does not contain a disk.I would like to just change the drive letters back to how it wants to be set-up.
View 1 Replies
View Related
Nov 29, 2008
My main pair of raid drives crashed and burned. So I installed XP on my second pair of raided disks and recovered the data from the first pair. But now my boot/o-s disk is D and my drive is C.Any tools I can use to change drive letters around and move boot information and such automatically?
View 9 Replies
View Related
Jul 16, 2005
My CD rom is showing up as Drive D: and my second drive partition is showing up as Drive E:. I want to switch them so the CD rom is always the last drive letter.
View 8 Replies
View Related
