I would like to know how to change the format of how the date and time are displayed on the Windows XP desktop (generally in bottom right of the screen next to icon tray).I have two laptops, both running XP Pro and fully patched. One of them shows the date and time as follows:
date and time incorrect error message is displayed on bios I have not installed any program, but a pop up is displayed on "ALL PROGRAMS BUTTON", eachtime i click on start button and some programs are highlighted, no program is installing correctly.
Each time I turn on my computer and as it is boots up it will delay for a time with a line that reads something like Automatic IDE Configuration and then a message that my date and time are incorrect. The date goes back to Nov. 2003. Once I correct the date, time and year things seem to perform ok.
Even though I'm logged in as adminon my PC (Windows 2000), I can't change anything andhave no access to the controll panel. I need to change the date and time on my PC, it's stuck on December 2002. I also can't change or delete any wallpaper, no access. I've had this problem for a while, postet it here and didn't get help, haven't been able to solve it, yesterday my PC finally blue screened with a STOP error. I booted from CD and re-installed Windows 2000, so I could at least gain access, but I need help with these issues,
A buddy of mine just moved to the US from the UK and his computer has XP pro on it but it has a 24 hour clock rather than a 12 and I can't find a way to change it and when he goes to certain websites and attempts to DL something it shows him Euro DL sites rather than US and news web sites such CNN and FOX show UK and or Euro versions by defualt even after cookies have been cleared.
I have a 4 year old computer that runs perfectly, except when I turn it off at night and then back on the next day, I loose a few hours on the time date at bottom of screen. I ajust each time I use it but the same thing happens each time I turn it off. Could it be the clock battery or? My operating system is Windows XP Home
I've been trying to reformat the drive and reinstall windows xp. I've done everything. The original problem was as follows: i rebooted with the cd and chose install xp (option 1.) Then it displays all of the available drives to format and install. Only my external hard drive (maxtor onetouch 300gb) was being displayed. I scrolled down but there were no more, and when I hit the up key i get a blue screen of death (with no error, message only "stop 000x00 or whatever
Have a Sony multimedia pc with WinXP Pro. It does keep time or date. I suspected the battery to be the culprit, so I replaced it. It still does not keep time. ? The pc is in warranty, but I will have to ship it out at my expense to have it repaired. Could the pc have more than one battery.The one I replaced is one I was familiar with as being the memory battery. It is about the size of a quarter.
I'm new to the forum and have a small problem that is driving me crazy. Searching all over different forums and the rest of the internet has left me without an answer.I understand that the taskbar clock will go out of sync once in a while. The problem is I can't sync with the internet time autoupdate option. It gives me an error but doesn't say what's wrong.I'd like it to update without a third party program if at all possible.
Where is all the locations that the time and date can be set in the computer. In control panel it is correct but some where in this box it is confused. I know I deleted something and it indicated that it was done months ago. Today my wife ordered something over the internet and it gave the date as Jan.
When I start my Averatec c3500 notebook (XP), the time/date setting is the same as when it was last shut down. I rarely connect this computer to the internet so I must manually reset the time/date when I first run this computer. If this requires a new CMOS battery, where is it located & how do I access it on a notebook PC?
I have a Dell PC running Windows XP that will not retain the date and time settings. Usually within a 24 hour period I have to go in and manually change the date from January 2003 to the current date and also put in the correct time. Does anyone know how to fix this problem?
My Fujitsu Siemens computer running under Windows XP resets the date to January 1st 2002 00:00:00 everytime i switch on and load windows?This started happening after i had problems with panda antvirus or should i say virus! any thoughts on how to sort this out would be greatly received
In the notitifcation area, where the time is displayed, i now have time (e.g., 21.26) and underneath that is the day (e.g., Sunday). How can I get rid fo the day???
I'm having this weird problem in my computer's date and time. Its adding 100 years randomly, because of that I have to set it to the right date because other applications won't work with that time and date.And when I say randomly, meaning you don't know when it will change the date and time.
I have a 9 year old desktop computer whose motherboard was replaced about 4 years ago with an AMD NF4XK8MC or NF4K8MC motherboard. It has a 64 bit 3000 processor.It is running at 1.81GHz and has 1.25 GB of RAM.The system is running on Windows XP including service pack 2. It is fitted with a 80 GB hard drive formatted to NTFS. Everything is running OK except that every time I switch on the computer and it boots up, it seems to forget the date and time. I go onto the control panel and reset the date and time and it managers to remember the date and time until I switch off the computer and reboot it. It is only a minor problem but is annoying tthat I have to keep resetting it.
basically the date on my computer has turned into weird symbols and I don't know how to fix it. The time is actually okay, i think it's just the date or something. I tried looking in the regional/language settings and what not but i couldn't figure it out. Maybe you can. Here's a pic of the problem. Notice the date on the right side of the pic.
Why does the time and date keep changing. I have done (I think) everything right manually and thro internet time to correct this. changes to proper time then next time I log on my computer everything is wrong again.
Well its January 2008 and today when i turned on my computer i saw that my date and time were wrong..plus when i was starting up my computer a message said something like i need to set date and time. I tried to double click the clock at the bottom right side of the computer screen but it does not respond. The time and date window will not pop up so i can reset it. I tried the control panel clicked on dates, times, language, and regional options then i clicked change the date and time but when i click that option nothing appeared.I even click the change the format ... but i can't change the time. So that's my question.I am using AVG free edition but it is in error state and it will not allowed me to update because my computer date is not correct.
Is there a way that I can look up the time and date of the activity on my computer? I am curious about both Internet activity, such as "at 3:43am on sept. 9, 2005 the page stumbleupon.com was being visited" and/or any computer activity such as "at 8:00pm the windows media player was being utilized" or "added files at 8:05pm". I guess what I am hoping for is a time-stamp log.I have Windows XP v.2002 SP2. I am connected to the Internet using Qwest DSL 7meg bandwidth max. I have MSN Premium as part of this package. And I am using Norton anti-virus 2004.
This is a very handy method of inserting the date and time (according to the Windows calendar) into a text document. As far as I know, this only works in Notepad, not in MS Word or Wordpad.Steps to insert date and time into a Notepad .txt file:1) Click Start > Run2) Type "notepad" without the quotes3) Push F5 on your keyboardThis simple shortcut can be very useful, especially when making logs or recording any kind of time-sensetive observations.
I am testing different XP windows scheduling ideas that are set to run every Wednesday morning at 1.00 am and Saturday morning at 1.00 am. How do I change the system clock to test the schedules which have been created? The system clock has to stay active for six hours, which is the length of time it takes to run all the projects.
Somehow my clock was a month out for a short period and all my outgoing messages in OE were wrongly dated. Is there some way I can re-date them? Otherwise, these messages will not appear in the correct date order in the sent items folder and this is important to me.