my brother got a Mini Dual USB Camera
http://www.shoptronics.com/midumousbvga.html
That is what the product is.
Yes, i have the CD for this but when i try to install it i dont have any like ERRORS in windows or anything
I just cant get it to start to where i can get the images from and off the device.
On the CD it says
its a black CD
EOTSQXXC
DIGITAL CAMERA
Arcsoft Photo Impression 4.0
now if iplug the Port and the USB to the computer it will read it.
Here are some pictures of what happens.
http://img364.imageshack.us/img364/7514/dualmode3ib.png
http://img364.imageshack.us/img364/8171/selectdevice0sq.png
http://img364.imageshack.us/img364/2248/thecd5dd.png
I have Linux and Windows XP sp2 home Have tried searching the forum without any results Tried f8 when script for grub appears but have been unsuccessful
Spontaneous re-boots due to bug check I disabled: system properties > advanced > startup & recovery / settings > failures / automatically restar. Event viewer > save dump. I have read KB 385271 [ how to use dump check ] & KB 314084 [ how to gather information after a dump check ]. I tried to use pstat.exe to solve the problem, but I am unskilled.
almost once a week i receive a blue screen, so if anyone could tell me what is causing that i will apreciate it.i attached the contain of the folder mini dump.
i got this very old and cheap brandless webcam, it came with a mini-cdr which holds the drivers, when i place the mini-cdr into my dvd drive, it made a load noise, then the installer runs and i got the error shown in the top of the pic, as i continue the installation i got another error, shown at the botton of the pic, now i know maybe the disc is corroupt or something, so i decided to use device manager to install the drivers manually.
when windows did found the driver on the disc, it turns out to be a notepad file, which was strange, but i continue to install anyway, but windows pops up a message saying the driver isn't signed or could be harmful or something like that, i cancel the installation and uplugs the camera. i thought it made sense since the mini-cdr could actually be a coaster or a badly burnt disc, as the installer states there's an error, but should i try anyways?
Pentium 4, 2.44 gig processor, 2 gig memory, XP Pro SP3. I have had recurring BSOD for 2 months. After running a mini-dump with BlueScreen View, the problem appeared to be a corrupted ntoskrnl.exe file. I rebuilt the Boot.ini file, which loads the ntoskrnl.exe file. Still BSOD crashes. I then purchased "Registry Booster", and ran that. Continued BSOD crashes. I can send a JPEG of the BlueScreen View if any one can help me figure out the cause of these random crashes.
Here�s the problem I have been looking at a friends dell latitude d600 equipped with a 1450 Broadcom wireless mini pci card Driver for the card is up to date, the card is brand new, every time I shut down, then reboot I have to reinstall the driver again,�.the driver keeps getting dropped for some reason��..Xp pro sp2���.
I have been trying to install Windows XP as a second OS as I already have Windows 7 Ultimate installed. Unfortunately, after I select a partition, format it, and reboot the system stalls on the screen after the BIOS that has something to do with a list of devices and such. After 10 or so seconds a few characters and letters go blank randomly on the page. I rebooted and selected my cd drive as the boot device and accidentally didn't press a button in time to boot and a bunch of highlighted numbers were thrown all over the screen and a random smiley face on one of the lines.
I'm trying to dual boot 2 different installs of xp pro from 2 drives using the Windows boot loader. I've edited the boot.ini every possible way I can think of, but nothing works. I've done this plenty of times using a linux boot loader or dual booting from a single drive but I cant figure this out. I haven't been able to find any reference to this subject anywhere, but I think it would work. Anybody have a clue as to how to do this? I know I can use a different boot manager to accomplish this, I just wanted to make the Win boot.ini work. Or, does anybody know of a good boot manager if I cant make this work?
I have dual booting on my PC with Vista home premium on a 500 Gb SATA disk and XP Pro on a 250Gb SATA, both internal. Vista no longer holds terrors for me and I'd like to get rid of XP and regain better use of the 250Gb HD. Can I just remove XP from the control panel in the XP boot or is it a lot more complicated?I don't really want to re format the XP drive as I'd have to transfer a lot of data and files
I have Win XP home installed as OEM software on the C drive of my PC. I also have this OS as a Norton Ghost file supplied with the PC as a "Recovery CD". I have installed a second hard drive designated "D" This all works fine. I wish to install Win 2000 (which I have on a Microsoft cd) on the second HD. I would then hope at boot - up to be given the choice of which OS to load. Can anyone tell me what is the simplest way to do this?
this is the best way I know to explain all of this. I am running a 3 yr old Gateway with Windows xp and Sp 1 & 2. I have always stayed up to date with my Windows updates deleting cookies, defrags and so on. I am running Avast anti virus and Armor 2 Net firewall. I have noticed over a period of about a mth that my system has been getting pretty slow to boot up and load up web pages. Now I am having to manually start my PC and I have to do it in safe mode F8 and click on debugging mode. If I don't do it this way then everything loads up and then my PC just turns itself off. I have PC doctor and I have done a complete diagnostic test and I have gone to antivirus.com and did a virus scan there as well as with my Avast. I am thinking that I may have to totally take everything out and reinstall everything back in. The only thing is -is that I don't know what to type in to get the whole thing going. Also I have been getting a message but only sometimes that says RTL cannot locate HPOIPMO7.exe (HPOIMO7.exe) I haven't a clue what this is. Might it have anything to do with what is going on. I don't mean to write a book here but there is one other thing, the other day I had a window pop up that said that windows needed me to reinstall my xp software and when I tried it said that the version that I was already running was newer than the cd software I was trying to install and wouldn't accept it.
computer was in blue screen. Unplugged and rebooted. Hung at Starting Windows. Unplugged again and rebooted. Selected user and continued on. Hung after desktop image was downloaded and normal desktop was presented. If I moved the cursor to the task bar, got hour glass. Could not get task manager to appear and could not start any program.Booted in safe mode with networking.
but i think i posted this in the other area before. i had some bugs i couldn't delete in normal mode, so im like oh kay, easy, go in safe and delete the suckers. i restart my computer and f8, and try to go into safe mode, said something about your computer was shut down incorrectly or power lost and some files are missing now.
so im like, ummmmmmmmmmm... how do i get round this. so, i restarted my computer and put it in to the (Last Known Good Configuration), i know, i went to Run>msconfig>Boot.ini>tick /SAFEBOOT and restart my computer, not knowing this was one of the biggest mistakes i've ever done. it starts and it runs a little big and boooom!!! blue screen pops up and this is what it says, "a problem has been detected and windows has been shut down to prevent damange to your computer....
An infinite loop it seems. i was trying to start my pc in safe mode, to delete a .exe file from C:WindowsSystem32 which was suggested by a post to fix the "windows not genuine problem". To be able to do that, i ran msconfig and selected /safeboot under BOOT.INI tab. now everytime i try to reboot my pc it asks me to select an operating system (windows xp pro/microsft windows) if i select windows xp then it asks me to select a startup mode (safe/normal/last successful) and then no matter what i select it will reboot it self, and do the same again. If i select microsoft windows (instead of xp) then it shows MS Windows 98 screen and then goes into DOS prompt. from what i have read in some of the threads is that, i have a virus which is preventing my pc to boot in to safe mode, and because i have selected /safeboot from msconfig windows will only boot in safe mode, meaning i am stuck. the workaround these threads were suggesting was to find the boot.ini file and rename it to something else, which would fix the problem, because this file holds the info about in which mode your pc should boot. i tried to rename this file from command prompt (i cant get into windows, thats why), using "ren c:oot.ini boot.ini" but it says file name invalid. i think this is because its a hidden file. then i tried "attrib -h boot.ini", but it says attrib cannot be used in DOS mode.
I went into MSCONFIG and checked the box to go into safe mode so i could run some virus scans and adware scans and stuff like that. Now when it gets to the desktop it has the window that says Loading Windows and then after like 2-3 min. it says password is incorrect and that i should retype it and becarefull of caps lock and stuff like that. The thing is don't have a password. It does this when i boot normally too but it lets me hit ok and hit Cancel without a password entered.
All of a sudden it tries logging me in automatically when I start up but the thing is i dont need to log in. So I try to go back into normal mode and Ican't. I hit F8 during startup and went to the Boot Normally option but it still does to safe mode. What do I do? How do I log on or how do I get rid of this password thing? One more thing, the window that tells me the password is wrong has an OK box but theres no mouse on the screen for me to click it and I can't use the keyboard to select it.
I've got a problem booting Windows XP in safe mode though it works wll in normal mode. I press on f8 at the begining, I do get the menu where I chose the option "safe mode" and then it seems to boot up but after a few seconds all I get is a black screnn and a blinking cursor on the top left (this lasts for more then 15 mins when I get fed up and try again) What can I do?
I've got a Dell Dimension 4550 running windows XP w/ SP2 and ALL the latest patches here in my shop, and I've got the weirdest problem. I wanna sweep it clean of viruses and spyware, but can't boot to safe mode. It boots completely fine in normal mode, no errors or anything. The BSOD I get is: DRIVER_IRQL_NOT _LESS_OR_EQUAL 0x000000D1 (0x00000000, 0x00000002, 0x00000000, 0x00000000)
Hello everyone , i have read a lot of posts about slow pc in normal mode but i cant find any help. My PC Starts up very slow... WinRAR , Winamp .. starts also slow , for example i download a file which is rared. i press Open and then it stop responding for awhile
I went into bios and disabled the search for the A: drive , because i couldn't care less. then it brought me to the screen to choose to open in safe mode, normally, or from the last point where windows worked well. problem : i can not use my keyboard in this setting, it works in bios, but i cant choose to load from the last working point of the OS.
Went into msconfig and set up safe boot on restart.PC will not load in safe mode or in normal mode it just keeps looping back to the same screen.I have tried all the options on the screen.Is their anyway to get back to msconfig.I have the XP setup disk.
Ran smitfraud and rebooted but my computer keeps freezing both in safe mode and normal. I tried last good configuration but the same thing happened. Either just a black screen with the mouse icon or frozen on the long list.
Computer restarts before login screen unless I interupt boot to choose debugging mode (or set it using msconfig). I've disabled everything in msconfig with no change. I've removed all hardward except the minimum. No change. The error I get if I prevent auto restart during boot is a "Multiple_IRP_Complete_Requests) error. This problem started without anything being installed or removed. If I go in to the BIOS and disable ANY devices (i.e. sound), then the Debugging mode trick to get the computer started doesn't work which seems backwards.
I have a dual boot linux/xp system.I was looking at partitions - just listing them - in linux, and now win xp won't come up in normal mode. It will come up in safe mode, however. Can you help me get my "normal mode" back?When the horizontal moving bar comes up in normal mode, it just goes on forever. I see the disk light go on for about 8 cycles of the bar. It usually runs 11 cycles before giving me the user selection screen. Now the disk light goes out after cycle 8, and the bar keeps going. I waited 32 cycles before giving up.
I can boot up in safe mode, but it's frozen up a couple times, over about 20 hours of usage, and I've had to restart.I've tried running adaware, windows defender, housecall, kaspersky online scanner. They came up with 4-5 items but it didn't fix the problem.
On System Configuration utility (start<run<"type" msconfig) on boot ini tab I selected Safe mode & Minimal (Alternateshell) & restarted. Then On the screen I see only a dos prompt window, CMD.exe. No graphical window. No start menu or other destop icons.Restart & try with F8 key, other F keys...... no use. Then I repaired with the win xp cd. The problem going more worst than before. The machine display a message "Windows xp setup cannot run under safemode . Setup will restart now". Either I close it or OK it, machine restarts. I can't even try anything now
