I've upgraded to windows 8 from xp with a clean install, but I can't seem to get the audio working, I've manually gone thro device manager and up dated everything in there and its telling me all drivers are up to date. My speakers are plugged into the green 3.5mm socket and are powered by the usb connection.
View 3 RepliesNo Audio or Sounds from Speakers or Headphone Jack after upgrade to Windows 8
Compaq Presario CQ60-615DX
Processor:
Intel Celeron 900 @ 2.20Ghz 2.12GHz x64 bit
OS:
Windows 8.1 Pro
Audio Driver/Sound Processor:
Conexant Pebble High Definition SmartAudio 4.126.0.62 Windows 7 64-bit
Realtek High Definition Audio Driver 6.0.1.6914 / 5.10.0.6914 Windows 8 64-bit
The Laptop originally ran on Windows 7 and I updated the OS to windows 8 and upon doing this the audio stopped completely from all audio sources (i.e. windows sounds,speakers,line- in/heaphone jack).
I tried Disable/Reenable driver,Rollback driver,uninstall/reinstall and discovered that the driver is not supported for windows 8. Upon learning this I have tried other Audio Drivers (i.e. Realtek HD Drivers etc) and no avail.
I've recently updated to Windows 8.1 and it auto reinstalled the original audio driver and still, no sound. I have also checked all Audio Codecs and still no luck even going that route.
When I play an mp3 on let's say wmplayer the volume bar will move up and down with the levels of the song that's playing as per usual but I get no sound. Volume level can be at 100% and there won't be any noise at all, no distortion, white noise, just silence.
This happens no matter how sound is being produced music, videos, games, internet, windows sounds etc... And trying to get audio from headphone jack doesn't work either.
Any solutions to the out of date driver issue I am having? Seems that the driver not being compatible with win 8.1 is where the errors began. Is there a fix for this or am I best off getting a usb audio driver and running my sound that route?
HP ENVY 20-d094 TouchSmart Desktop
How can I use 'external speakers' (using the external speaker jack on the back of my touchscreen) ...
AND NOT have it over-ride the BEATS audio.? Once plugged in , the external speaker are heard BUT the BEATS AUDIO is muted. ! (OFF)
Is there a way to have BOTH speaker 'sets' be heard ?? The Touchscreens Beats Audio & my external Boston Acoustics speakers ?
I just bought a new pc and received it today, and i plugged my headset in to check if i hear audio from both speakers and headset but its not working. When i plug my headset in i only hear audio from my headset and not the speakers. Ive been googling and found something about it but with the newest realtek hd audio i dont have the Playback Device there, only the Recording Device. In this picture it has both the playback and recording device.
View 9 Replies View RelatedMy friend connected an external monitor to his Sony laptop using an HDMI cable. The problem is that there is no audio from the external monitor speakers. The sound still comes out of the laptop speakers. When I look in Playback Devices, I see what appears to be the speakers as a device (can't remember exactly what is was called, but it was a somewhat vague name like "audio device"), and I've tried various settings, yet I can't get sound from the speakers.
So my question is, does an HDMI connection on a monitor support audio, or does he need to get a audio cable and use the green audio jack that is on the monitor, which I thought was just needed with the VGA connector.
I have no sound in windows or in personalization nothing from the speakers, volume I set but no sound.
View 6 Replies View RelatedI have an alienware m14x laptop, which I purchased around 2 years ago. One part of the problem is what speakers I actually have built into the laptop and cannot look for the proper drivers to potentially fix this issue. The other part of the problem lies with windows 8 itself.
Whenever sound comes out of my speakers, (there only being a total of 2 speakers) it only comes out of one of the two speakers at a time. THIS IS CAUSING THE SOUND QUALITY TO BE COMPLETELY TERRIBLE. How to make ALL audio come out of both speakers at the same time.
I am using Windows 8.I am facing an issue with my sound all on a sudden. The volume icon on the task bar has a red cross on it. When I hover on that it says 'No speakers or headphones plugged in' (attachment-1).
When I click on the icon I get a screen like attachment-2 which says 'The peripheral does not appear to be plugged in'.
I checked in the Device Manager to see only 'Bluetooth Headset' listed under 'Sound,video and game controllers'. Also I tried to re-install audio drivers (Real Tech High Definition Audio Driver) which is provided with the laptop to no avail. I don't know whether this is just a driver/windows problem or a hardware problem.
I recently upgraded to windows 8 pro 32 bit. For a month there were no problems.
But one sunday afternoon i was watching some movie on my laptop and suddenly the speakers stopped working.
I restarted it, but to no avail. However my headphones still work, and so do external speakers work.
I tried reinstalling audio drivers frm the mfg's website-Didn't work.
I tried System restore to a point where i knew my speakers were working-Didn't work.
I even tried refreshing windows 8-Didn't work.
After almost a week now my speakers still do not work and only my headphones work.
I recently updated Nvidia Graphics Drivers in order to play COD BO2
I have a toshiba satellite p75-a7200 with windows 8. When I hook up my logitech z 2300 speakers it sounds like crap. Logitech z 2300 speakers are very good speakers so this should not be happening. When I hook up my logitech z 2300 speakers to my iphone or my old dell laptop it sounds good like it should. So this makes me think that their is a Windows 8 setting that is messing up my speakers. What settings in Windows 8 do I need to change my make my speakers sound good?
View 4 Replies View RelatedLatest version of Windows 8 This will take a while A few months ago Windows 8 quit producing sound through my speakers - overnight. I've tried a number of things I'll list here. Volume Control - red 'x' in bottom right corner. AMD HDMI OUTPUT and HEADPHONES are checked. Troubleshooting Speakers/headphones produces "doesn't appear to be plugged in' - they are. See next sentence. Potential issues that were checked. Check audio device issue not present one or more audio services isn't running issue not present audio device is disabled issue not present I can plug the speakers into a Vista PC and hear music so I know(?) the speakers and cable are plugged in and OK. Device Manager>Sound,Video and Game Controls>AMD High Definition Audio Device = device is working properly. Using most recent driver - Rollback is disabled. I have two sets of audio inputs on the back of my PC. Tried them both (have always used the top ones). Someone suggested checking my sound card - don't know how to do that. One last thing . . . I found an MS article telling me to disable/enable the AMD. Did that but as soon as I disabled it, it disappeared.
View 6 Replies View RelatedI am running a Compaq CQ58 with windows 8.1
A week ago, i turned on my laptop and discovered that my sound wasnt working. I cheaked the sound menu, it told my that the speakers were not plugged in. I looked in the recording menu which told me my build in mic was not plugged in.
I was able to have sound by plugging my laptop into my tv with a HDMI lead.
I got fed up with a slow laptop and no sound so i decided to reset my laptop, when the reset was finished my mic and speakers worked. I turned it off and when i woke up i turned it back on to find my mic and speaker was "not plugged in". All my drivers are up to date and i have no updates to do.
Previously I had Microsoft LX-3000 USB headphone, windows used to recognized those as headphone, but these new
HP USB headphone are recognized as Speakers. How I can I change it ?
unable to disable speaker feature that tells name of each key hit. the key disabling feature [or place in user manual that addresses this feature]?
View 2 Replies View Relatedall plugged in new computer drivers up to dateset to quadraphonic they were working yesterday but they appear to have stopped on their own. the test speaker option worked at first but now they dont when i click the speaker icon to test on the sound playback options tab the level indicator shows green as though they are working but there is no sound coming out of the rear speakers
View 9 Replies View RelatedI went to BIOS and enabled sound, but, when i turned on computer there was sound, but it was show as headphones, and speakers aren't plugged in. Actually is opposite, headphones aren't plugged in, but just like they are, and speakers are plugged in, but they don't work.
View 1 Replies View RelatedI am using windows 8 pro x64 with an asus P8P67 LE motherboard and have a 5.1 sound system. I installed win 8 fresh and the audio was working fine. One time when I booted up, the audio sounded off. The sound was only coming out of the front left speaker. I did the speaker test within win 8 and the realtek menu. The front right speaker is being detected as the subwoofer and the rest are fine. It's the only speaker not working properly so it's like having two subs. I tried setting it to stereo, 2.1, speaker fill, ect... with the same results. I have not messed with wiring or software. Sometimes it would go back to normal but then do it again randomly. In the end, I reinstalled win 8 and it worked fine. Then suddenly, it happened again. The only difference this time is that it will not go back to normal by itself. It seems to be stuck on this "setting". I did do some research but I guess I didn't do it well enough because I could not find an answer that would work. Again, it worked fine in win 7 and sometimes in Windows 8. I have checked the wires to make sure nothing has changed and that they are connected well and they are fine. I tried changing the speaker settings and speaker fill but with no results. I don't know what else to try.
View 3 Replies View RelatedI have an HP Pavilion dm4 3050 laptop. I have spent a lot of time trying to fix my bluetooth problems since updating to 8.
I go into add a device in a the CP and the machine finds the bluetooth speakers and I add them. I then right click them-> sound settings, then see my speakers below the default device speakers. They are listed as disconnected so I right click them and try to connect but they won't connect. I have updated the Intel bluetooth drivers but the speakers still won't connect.
Just got my Acer Aspire E5 572g back from repair at Acer Repair Center.
They switched out my prosessor, but now i got no sound. The computer came back with a clean install of win 8.1.
Added a screenshot showing drivers and that sound is "playing"...
Whenever I unplug the speakers jack and plug in the headphones, the sound stops! I have to restart the application or run another one and then the sound is back. This is really silly and takes time especially when you need to restart some game.
View 5 Replies View RelatedI have a windows eight computer, and when I plug in my microphone (on my headset) my speakers are muted. I assume there is a simple sound option somewhere that does this, but I have been unable to find anything by looking around or searching google. The headset does not mute speakers on other computers when the microphones are plugged in, nor does it differ with other headsets.
View 3 Replies View RelatedJust set up new asus essentio series desktop with windows 8.1. After initial set up the monitor speakers are on but no the connected external speakers. I assume I need to make some change in the control panel. Is that true. I want sound to come through external speakers.
View 2 Replies View RelatedAsus All in One
Asus ET 2410 IUTS
23.6 Desktop
Can I connect the Grace Digital Matchstick Speaker Dock that I have for my Kindle Fire HD to my Asus desktop?
I am not familiar with Bluetooth and whether I need connections or software to do this.
I might need a different kind of Bluetooth Speaker System than the Kindle Fire HD dock.
I have the Aux cable that connects to MP3 players and cell phones. Do I need a (line-in) cable or something else to make it work. Or is this Matchstick speaker Dock not made for computers?
I bought the plantronics .Audio 335 studio headphones, but when I plugged them in, it screwed up my sound. My compute'rs sound is now playing through both the headphones AND the laptop speakers. After unplugging it and trying again a couple times, I gave up and decided to just use my old headphones.
Except for the sound still played through both the headphones and laptop speakers.
Distraught, I restarted my computer. When that didn't work, I restored my system to a point I made yesterday. Still no luck. I've been scrounging google for a few hours now, and nothing is working. I REFUSE to refresh my system and reinstall all of my programs again.
I recently purchased the Polk Hampden Speakers. For some reason, the manual volume control built into the speakers themselves doesn't affect the volume level. The only way I can adjust the volume is by using my computers volume control software (the little white speaker in the bottom left of Windows 7/8). I am fairly certain the hardware volume control isn't broken, because when I first plugged them in ( a week or 2 ago) they worked fine. It wasn't until I disconnected/reconnected everything from my computer when I installed a new desk that this problem started.
However, even the software volume control isn't working properly either. In particular, when I go into the mixer to see the volume levels for each application, if I adjust the main "Device - speaker volume" it won't alter the specific applications volumes accordingly. Like, I can reduce the main - device speaker volume all the way to zero (not muted) and the applications will still have the same volume level as they did before I adjusted it.
Finally, even my keyboard bindings to the volume control are whacky. I can still adjust the "main - device speaker" volume with the keyboard, however since this "main - device speaker" volume no longer influences the individual application speaker volume level it is pointless to do so.
I have tried disabling all other sound drivers/sound hardware, but it doesn't work.
I have tried uninstalling/re-installing the USB drivers for the Hampdens which didn't work.
I have tried restarting the Microsoft Services responsible for audio output recognition which didn't work.
I have tried downloading the audio drivers specific for my motherboard, but that didn't work.
Additionally, applications sometimes don't recognize the speakers. If I start the application before turning on the speakers the application won't recognize the speakers unless I cycle through the speaker output modes (the little button under the volume knob) and get back to USB mode. Otherwise, I have to completely restart the application. This issue isn't as big of a problem as the manual volume control not affecting the volume output of the speakers.
I have tried uninstalling all my audio devices/drivers, but this doesn't seem to work. They just instantly re-install it appears.
I have a couple of speakers I use with my Desktop computer.
On a previous set of speakers, the power button soon wore out, so with this current set, I have them on a power strip, and use that button.
I now see that the volume control on my speakers is becoming staticky / crackly.
So, I've started using the on-screen Volume control icon in the bottom right, to adjust the sound.
I have to click and open it every time though.
Is there a way to make the Volume control "on-top" all the time, or can some other program do this?
I've installed Win 8 64bit on my Acer Aspire 8930g laptop, in January. Till recently, the 5.1 sound was ok. A couple of weeka ago, the central speaker is silent, the front left & right speakers are very low, the two back speakers and the sub are ok. I tried un-install and re-intall all audio drivers (Realtek HD audio & Nvidia digital audio) but the problem remains.
View 9 Replies View Related However I am experiencing problems with the sound. It just doesn't appear to be working, despite the volume being turned up to the max. The problem usually fixes itself briefly after a restart but it then cuts out after time.
None of the playback devices are muted. When I try testing the speakers, I get an error message saying "Device in Use: Please close any applications using this device for playing audio" - however, there doesn't appear to be any device using the speakers.
I have recently started using an HDMI cable to use my laptop through my TV
I had my laptop for about a year now. The problem is after watching 3-4 videos, the sound will not work on the next file. I tried restarting and it worked! But after another 3-4 videos, there was no sound again. Another thing is when I open a music file, it works again. But the cycle just goes on.
Acer aspire v5-551g Conexant high definition audio ...
when i connect my headphones they work OK, but i can also hear trow my laptops speakers and they are not disabling themselves like they use to.
View 4 Replies View RelatedI wonder if there's a way to make my own voice audible in the speakers/headphones when using a microphone?
I also have RealTek HD Audiomanager installed, since I have an ASUS board.
Could this be done in Windows?