Different Characters In File Properties Instead Of Numbers
Feb 1, 2014
I am using a Dell laptop with Windows 8 Home. The file Properties show strange symbol-type characters where there should be numbers etc. See Screenshot...
It's been like this for a while and I have probably installed half a dozen programs etc. so I don't know what did it. I don't want to upgrade to v.8.1 as it took me ages to get a 3rd party Start button set up and 8.1 over-writes it I rolled back to a previous image of v.8.0 (True Image not System Restore).
I recently upgraded from windows 7 to windows 8 pro. The install went well. During the post install I found that I could not use the numeric keys to enter numbers into my browser address bar. I tried all three browsers, Firefox, IE 10, and chrome. I tried a second keyboard with the same results. I verified that the system worked correctly at the OS level by entering numbers and special characters into notepad. There are several other places that the problem is present.
When I enter my password to get into Comcast webmail and when I enter a password containing either a number or special character in a prompt for accessing one of my network devices. Any problems with keyboard control after upgrading to win 8?
Can I delete these old folders from 2012 i posted a picture there are others with random numbers and letters as well that are not folders, they appear to have a windows KB file in theme are they safe to delete? Here is the picture...
I have two monitors and when I boot up my computer the UEFI splash screen appears on my smaller second monitor, rather than on the main monitor where I want it, but the login screen appears on the main monitor. As I normally only switch the second monitor on when I want to put something on it to avoid obscuring what is on my main monitor this is rather irritating.
I am assuming that the reason for this problem is that my main monitor has an identity number 2 and the secondary monitor is numbered 1.
My setup is :- Windows 8.1, 64 bit; Asus RAIDR Express PCIe SSD; Asus GT630-SL-2GD3-L GPU; Asus SABERTOOTH Z97 MARK 1 Motherboard, BIOS version 0602; Processor Intel i7-4770S @3.1 GHz; Kingston Technology XMP Beast Series 32GB 2400MHz DDR3 Memory.
I have tried uninstalling the drivers for the Dell monitor and rebooting the computer but it still comes back with an identity number of 1. There is nothing in the Nvidia control centre to enable me to swap the numbers. Is there any way of swapping the identity numbers over?
The iiyama is connected from the DVI port to the DVI port on the graphics card, the Dell connects from a DVI port to the HDMI port on the graphics card.
I have a lot of files who are stored into folders (~ 2-3K worth of folders with 2-20 files in each folder) and I need to search in each one to see if there are any files that are similar in name. None will be exactly the same so I need to only compare the first 10 characters and if there are 2 files that have the same characters, then I need to have them displayed so I can decide if I should delete one. The problem with commercial duplicate detectors is they match the entire name or the CRC of a file which in this case will be different.
I like to use a few ASCII characters in emails and letters. Like registered trade mark or cent symbol, etc. Sometimes even the happy face. Using Win XP I would use the Alt key plus a number. Now when I do that, nothing happens. How do I access these characters using Win 8.1?
I am using a hotmail account for an account, but it is 8 character password, and I would like it to be shorter than that so that i can use it pretty conveniently. how can i do this?
I have a number of special fonts (all are .ttf) that I installed, and some that came with software for use with the programs. All of these fonts worked fine when installed on my Windows 7 64-bit computer.
I have installed all of these fonts on my Windows 8 64-bit computer, and some of the characters on the fonts do not show. Windows has substituted other characters in place of these.
Yet when I open the font in a third party program like Font Creator, all of the characters on the font appear true.
Is there a setting in Windows 8 that I need to adjust so the characters will show as they are supposed to?
Some files, when open with notepad, can be easily read in English. For other ones, I get characters. How could I read these characters, is there any online translator for this? or I should learn basic C++ or other means?
But I'm afraid there is not a setting in Windows 8 to get this done. Okay, then I handle the programs seperately! Until Windows 8 I could always rightclick a shortcut, then get "Properties", then I chose "Maximized". But to my unpleasant surprise I only get the latest documents (Which is very handy indeed!), and a choice to "Loosen the program of the taskbar".
I cannot seem to get the "taskbar and navigation properties" pane, only the "taskbar properties" pane. I am running as administrator and have upgraded from Windows 8 to Windows 8.1 on a new laptap that I have just purchased, but am still having trouble getting the "taskbar and navigation properties" when I right click the taskbar.
The "taskbar properties" only gives me three tabs ie. taskbar, jump lists and properties, but I need to access the navigation tab on the "taskbar and navigation properties" pane.
Just as it says, if I right click on "Properties" in My Computer and try to pull up the System Information sheet, the whole desktop shuts down and then re-opens.
I am running an AMD Athlon 4400+, overclocked 7%. I am going to set it back to 5% and see if this continues.
I have this entry in my system log:
Code: Log Name: SystemSource: Microsoft-Windows-WHEA-LoggerDate: 9/28/2013 10:25:18 AMEvent ID: 18Task Category: NoneLevel: ErrorKeywords: User: LOCAL SERVICEComputer: ASUS-PCDescription:A fatal hardware error has occurred.Reported by component: Processor CoreError Source: Machine Check
My previous OS was Windows 7 64-bit. I used rip my favorite music tracks and was able to edit the details in the Details tab of the Properties window after right-clicking on the file name. The system hardware is the same. OS is now Windows 8 64-bit. But when I open the mp3 file's property window and go to the details tab, I get fewer options in detail and I CANNOT edit any one of them. I have run sfc - no problem. I have opened the Explorer as Administrator and still the same issue. Here's the screen capture:
I am the sole user of the desktop PC. And that I have another PC at another place with same configuration also running Win 8 64-bit. On that PC for the same file I see more details on the screen and I can edit the fields. I might post the capture from that PC later when I go there. I also ran the mp3Tag to get over the possible issue with ID3 tags.
First of all I want to say that this is not much big of a deal to me but still annoying nonetheless. I noticed that in some scenarios, for some reason, the "Properties" option in the rightclick menu of a file doesn't do anything when clicked on. You'd expect that a properties box of the concerning file would show up but nothing is happening. So far I noticed this in the following 2 scenarios:
1. When selecting multiple files in the Recycle Bin at once and then right click and choose Properties. Selecting only one file in the recycle bin and clicking Properties does work normally. 2. When right clicking on a picture that is shown with Windows Photo Viewer and then choosing Properties.
Are these bugs that Microsoft developers might have missed or is my PC at fault here? I'm running Windows 8.1 Pro x64 with Medica Center.
I have just recently acquired a brand new laptop running Windows 8, and I'm experiencing an issue with editing the details of MP3 files. I can right-click any MP3 to open its properties and access the Details tab, but when I click on the fields for the different tags, nothing happens.
I don't recall ever having this issue on my previous laptop with Windows Vista, so I'm at loss trying to understand what is going on here. I'm not very tech savvy about the subject of permissions and accessibility, but it doesn't really seem to be related to that. The files are listed under my local user directory.
I am unable to access system properties of my windows 8 pro. When i right click on My Computer icon and click Properties, System Properties window open for a second and immediately closes. I have the same problem even if i try to open System Properties from Control Panel.
I found out that, It's the windows update KB2871389..i uninstalled it from Windows update and "system properties" now ok.
Virtually every file shows read only when I right click on it and choose properties. In uncheck read only, then click apply and choose applies to all subfolders and files. Windows appears to change the properties (a window opens up and a green progress bar fills). But if I click OK and close properties, when I look at properties again, they are shown as read only again.
This happens both when I am logged in under my user name, as well as if I log in as administrator.
The only difficulty it's created so far was when attempting ti embed a cover art JPG into an MP3 file in my music library.
I am trying to import my contacts to the phone, which I gather can be done with a bluetooth connection via some sort of PIM that the bluetooth software recognizes. For the life of me I can't find any explicit reference to any particular PIM software that the Windows 8 bluetooth Properties dialog recognizes. Or, have I misunderstood the capabilities here? Do I have to buy and install Outlook?
I am unfortunately using Thunderbird as email & contact manager, but I've exported my contacts via .csv in the past so If I can find the appropriately compatible PIM for Windows 8 Bluetooth I think I can muddle through.
I have an interesting issue in the windows 8 metro menu. When I right click an icon you normaly get a properties bar pop up on the bottom where you can change tile size, pin to start etc. This bar is no longer appearing.
I did a very successful overclock, taking my processor from 3.3 Ghz to 4.7 Ghz. I can verify that in CPU-Z but it's not showing up in Windows Systems properties. What do I have to do for Windows to recognize the overclock?
