Untitled.png
In the image :Why is that? how to solve it ,the store doesn't work? It disappears with fresh install! Does taking ownership of some system files result in store failure?
After updating to Win 8.1 RTM the Store App doesn't work anymore. Everything else runs fine. After opening the Store App it takes only one or two seconds and the screen get's back to where it was before. The app is still opened, but does the same as soon as it's activated again. Is there a way to reinstall the Store App?
View 9 Replies View Relatedbig problem for everyone who uses an SSD for the sytem drive and used audit mode to relocate Users to another drive. Is there a GA iso available yet?n Or a way to burn an iso from what we've downloaded from the MS Store?
This seems like a pretty glaring oversight now that MS is pushing to get rid of optical media. Things fail, often catastrophically (esp Windows).
I just installed a fresh copy of windows 8.1 on my Asus N53S laptop that comes stock with Windows 7 and now my keyboard shortcuts for volume do not work. Above the F1-F4 keys i have three buttons to mute, increase and decrease the volume which do not work. The keyboard shortcut's for muting, decreasing and increasing volume do not work either (Fn+F10-F12) but the shortcut for decreasing brightness and turning the screen off works (Fn+F5-F7) If there is any way to get this working again.
View 2 Replies View RelatedI have an Asus GAC computer with Windows 8 OEM version. When I go to Windows store I see the 8.1 upgrade notification. When I click on it I get a message asking me to do all the upadates. When I do all the updates, the Store notification disappears.
I have to uninstall some updates to have the notification back on the Windows store but still asking me to do all the available updates.
My Windows 8 version is fully activated 'ASUS OEM)
Just installed Windows 8 RTM (DreamSpark) today.
When I try and use any part of the Metro UI, whether it be the Start screen or the sidebar, everything on the screen disappears when I mouse over something, and I have to Ctrl-Alt-Del into Task Manager to get back to the desktop. Even when I move my mouse along the side, everything on the screen flashes.
When I go in to Windows app store and click on categories and choose social, apps start to appear, but then suddenly dissappears. So I have no apps available in the social category. How do I fix this?
View 1 Replies View RelatedI just got three 320GB Seagate drives setup in RAID 0 for Linux, and I decided to also reinstall Windows 8 on my SSD since it started lagging and running slower than normal. While trying to install Windows 8, right after selecting a disk/partition to install to, I got a BSOD about an error in a nonpaged area or something. When I tried to boot into the installer again, I got a BSOD immediately after the logo splashscreen (too quick to see what it was about).
-I'm booting the Windows 8 installer from a Corsair Survivor 64GB USB3.0 flashdrive. I'm gonna try a dvd with a different iso that I downloaded more recently on my laptop.
I built a computer about a year ago and its run fine until about a month ago when my displays started shutting off and not coming back on. The only way I could get my displays to come back on would be to disconnect both monitors and only plug in the monitor that connects with DVI. Connecting the second monitor would cause both to cut out and sometimes BSOD. It seems the same thing was happening with the on-board video. I finally decided to do a fresh Windows 8.1 install and see if the problem persisted. As soon as the I got up and running again I got a BSOD (before installing any drivers). I then did the following tests.
- Ran memtest for 2 passes (no errors)
- Tried my GPU on a different PCI-E slot (Still BSOD)
- Tried unplugging the power from the GPU (Still connected to the PCI-E slot, still BSOD)
I was thinking of trying with the video card out completely but it seems the crash is random and I can't reproduce it.
I have MSI laptop GT70-20D all my drivers are updated to work with windows 8.1 from offical MSI site & I have my laptop running smooth once I leave it on for downloading my windows BSOD ...
View 1 Replies View RelatedI recently upgraded to an SSD, installing a fresh copy of Win8Pro.
I'm receiving constant BSODs, typically reporting BAD_POOL_HEADER and IRQL_NOT_LESS_OR_EQUAL
I've updated every driver I can think of (chipset, lan, usb, audio, video) as well as fully updating in windows update.
Memtest ran overnight finding no errors, and Western Digital's HDD utility reports no hard disk corruption.
I'm thinking either a bad driver, or some hardware failure that I can't nail down. My specs should be listed in my profile, with the addition of a 750w corsair PS and my HDD setup (AHCI, 1 crucial mx100 256gb SSD (primary), 1tb WD blue, and 1tb WD green as data drives).
Crash dumps should be attached, one may have driver verifier enabled.
Also, clean booting seems to be slightly more stable than a regular boot, so there's that.
Attempting to install windows 8.1 fails right at the end (after installing and setting up, reporting 0xC1900101 - 0x2003).
I decided to make a fresh install with a iso from the download page and use the key that they provide on that same page. Windows 8.1 Preview ISO files - Microsoft Windows. I tried english 64bit...
Running from windows 8 seamed to work but i didnt have 6.8 GB free .. So I go to boot from the iso and format the partition. But got the message saying , the key is invalid ... tried my own genuine windows 8 pro key .. also didn't work.
I am currently running Windows 8.1 and I want to do a clean install back to Windows 8. I have the original 64-bit Windows 8 Pro DVD. I put this DVD into my DVD drive and rebooted. I then went into the BIOS and made sure the first boot device was set to DVD/CDROM.
When I restart my computer it never gives me the option of booting to the DVD it just takes me back to the Operating System (my login screen).
My question is, how do I get my system to bootup from the Windows 8 Pro DVD so that I can do a fresh install?
A week ago I did a completely fresh install of Windows 8 64 bit and everything was working great. When I booted up my laptop on Wednesday I noticed it was running terribly slow. When I opened task manager I saw that disk usage was at 100% despite the combined total of data transfer being 0.8MB/s.
The problem occurs constantly if I set my laptop power mode to balanced but only occurs intermittently at high performance. I've run a chkdsk and everything is showing up fine and bizarrely there is no slowdown whatsoever on safe mode.
My store manager says it can't be done, but I feel there's a way...the problem is of course 8.1 requires different product keys than 8.0 -- where upgrading to 8.1 also changes the product key -- so 8.0 install media won't take 8.1 keys and visa-versa. So when you only have an 8.0 key, you have to first install 8.0 and then upgrade to 8.1; this is a bit weird because 8.1 is essentially a service pack; first "8.1", then "Update 1", what's next for the rebranding of service packs? I can only fathom they did this to cement their new "rapid release" cycle for consumer editions of Windows.
Note: "Easily activate" means not having to call Microsoft to fix the activation.
I upgraded my current installation of windows 8 Pro to Pro 8.1 RTM. Whenever i open my store , it keep on loading with the circle and does't go past.
View 3 Replies View RelatedI recently re installed Windows 8 then upgraded to Windows 8.1 because I was having BSOD. Now on the fresh install, which is 4 days or so old, my computer BSOD on start up like before.
My guess hardware failure or Norton....
Bought a Sony Vaio Pro 13 and as per usual with all my new laptops, a fresh install is done.
So on i went armed with my USB with Windows 8 created from an iso file from the microsoft site (i have msdn access).
The iso is a "multiple version" iso which has Windows 8 and Windows 8 Pro (en-gb_windows_8_x64_dvd_915412.iso)
Normally i would expect at the end of the install for the screen to allow me to enter my serial which in turn actives/deactivates features but for some reason, it has not this time round.
instead, the properties of my computer suggest a serial has already been entered "Current product key" *****-66ABC
Now i know i can "add features" and enter the serial that way but my question is, where is it picking the old serial from? i can only guess that the old serial is the one the laptop came with which is Windows 8 and not Windows 8 Pro.
The install was normal in terms of removing all partitions ( left the windows re and the sony recovery) so is it picking it up from there somehow?
I bought a new laptop with Windows 8 pre-installed (and immediately updated it to 8.1).
I decided after a week to buy an SSD and installed Windows 8.
I now find there is no product key to be found, and can't seem to activate Windows.
1. I've tried a few things. I tried to enable UEFI in PC Settings, but the setting isn't there (does this mean my laptop doesn't support UEFI?)
2. I entered my BIOS. CWM was enabled, and pwe enable. But SECURE BOOT disabled. So I enabled SECURE BOOT, but regardless of what options I select, the laptop keeps booting into the [Legacy] BIOS, possible because there are no BOOT OPTION PRIORITIES found any longer?
My problem is activating windows, and if UEFI is an option, enabling it.
I swapped the HDD with a new blank SSD in T530 and booted it with the recovery USB of windows 8. System boots from the USB and gives refresh, reset, and other options. However, when I select reset ( to fresh isntall the OS on the SSD), it fails saying a required partition is missing. What! I'm using a blank SSD, shouldn't the installer present me with options to format and use the drive rather than erring out?
Is there any better way of installing the windows 8 os on a new blank SSD using the recovery USB?
I do have gParted live USB. If nothing works, I will partition the SSD using gParted and try the Windows 8 recovery USB again.
For the past couple of months, I have been noticing unexpected freezes on Windows 8. Since I have access to MSDN, I decided to do a fresh install of Windows 8.1 to see if it solves my problem.
Now, when it freezes, it actually shows me some useful information. BSOD is labled as BAD_POOL_HEADER and I have grabbed the 2 dump files and other info in the zip file attached to this post.
Memtest and Chkdsk show no problems after running both. Memtest did about 6 passes last night without any errors so I know for sure it's not a problem with my RAM. Chkdsk showed no errors after running it in my 8.1 bootable USB so my SSD is fine. I also have the latest Kingston SSD firmware. NVIDIA Graphics card drivers are also updated to support Windows 8.1. Still not sure what's causing it.
BlueScreenView shows the following confilcts:
I want to delete all of the apps on a fresh install of Windows 8.1 with a double click. How can this be accomplished with a .reg or .bat?
View 6 Replies View RelatedSo I'm using a late 2012 iMAC running bootcamp with Win 8 64 bit system builder version. I just installed the OS hours ago and have already run into BSOD problems, I was directed to these forums and post before I try to do anything else and cause more issues. Every time my computer powers back up from going to sleep it crashes and gives me a system error for memory exception and shows the file name igdkmd64.sys. Like I said before long time apple user that started using windows again.
View 2 Replies View RelatedIssue solved as of Intel HD Graphics Driver 10.18.10.3345
I get a BSOD with message DRIVER_IRQL_NOT_LESS_OR_EQUAL (igdkmd64.sys) shortly after launching any game. The driver is linked to Intel's Integrated Graphics which I have updated with 'Windows 8.1 Ready' drivers. My laptop has a Nvidia dedicated GPU which is what I set games to run with, so I'm not sure why Intel's drivers are failing since using a fresh 8.1 install I have been receiving low memory error messages whilst playing games despite having 16GB of RAM.
I recently installed Windows 8.1 Pro x64 and the correct up to date drivers for my hardware. I experience a BSOD, it doesn't go into the BSOD right away but after 15-30 minutes of use I get the BSOD with the "page fault in nonpaged area" message.
I have attached my debugfiles and hope that someone much brighter than me in deciphering these files can lend me a hand at fixing this issue.
Found out it was my new Panda Cloud Free Antivirus. I deleted the POS and installed something else, now no more BSODs.
I tried using this method:
-After installation disconect from internet
-change in registry: HKEY_LOCAL_MACHINE/Software/Microsoft/Windows/CurrentVersion/Setup/OOBE -> Change "MediaBootInstall" from "1" to "0"
-type "slmgr /rearm" into a command prompt, waited for confirmation, restart
-after restart, connect to internet, activate
This works fine until rebooting and then asks for activation again.
I have tried three more times without reinstalling and the MediaBootInstall stays at 0 so it doesn't need changing. I type the slmgr /rearm and on reboot when I go to activation menu it says activated, but when I reboot agian it says needs activation.
Not sure what's going on. I thought it was a windows update at first messing with it, but it still does it even without any updates being installed.
My system currently has a blue screen around twice a day from what seems like a driver issue. I have tried driver verifier, swapped out the GPU since I thought most things pointed to that and did a fresh install. The only thing I have left to do is update my motherboard bios. I am questioning if the GPU was even the issue since I still got a crash... Below is the guide to Driver Verifier I used so you can see what steps I took. I am at my wits end and am not to great at pointing out what driver crashed or whats left to do after the OS install.
Driver Verifier-- tracking down a mis-behaving driver.
So I was getting bsods before and had my HDD wiped. when attempting to install windows 8 I get a bsod. Not sure which as it is too quick to read. I have flashed the bios to the most recent version. But it still bsods. I tried using a known, good working HDD with windows installed and it still caused a bsod.
View 1 Replies View RelatedJust got in the mail 2 ssd's and the HD7870 video card along with a copy of windows 8.1 complete (retail). My boot ssd (one I'm trying to install on) is a 60gb Mushkin and the other is the one I was going to put games on the 240gb Mushkin.
So I hooked the 60gb one up and put in my install disk for the 64bit of windows 8.1. It went through the install fine, then it said it needed to restart to complete and when it restarted it gave me the black screen of death. It sat there for over 30 minutes then the screen turned to a yellowish orange.
So I formatted the ssd, reinstalled fresh again. Same thing.
I then tried the 240gb thinking maybe I had a bad ssd. Same thing.
Then I tried an old 500gb Seagate that I knew worked but I formatted it and installed. Same thing.
So back to the 60gb I went, formatted, reinstalled 8.1 then it did the black screen again. So I tried booting over a couple times till it gave me the option to start in safe mode with networking. It started in a black screen with the blue windows logo... and stayed there for an hour.
I then tried the command prompt methods of BOOTREC/FIXMBR, BOOTREC/FIXBOOT, BOOTREC/REBUILDBCD and restarted with same black screen. *after the rebuildbcd, it said copies of windows = 0???*
So I tried to start using the install CD as a recovery drive, it brought up the option to install windows....
I'm not sure how I can get dumps or test stuff if there is no way for me to even get to the actual explorer other than the black screen or the black screen with the blue window logo, or even he more rare black screen with underscore blinking...
So I've ordered a whole new system and am looking to only take the SSD from the old computer, but I want to format it so I can start anew, I've got windows 8 and I'm not sure how I go about activating it on the new system and all that.
I've got the key that I had to use for the first installation, would I just plug that in again? or will it come up with "being used" or something similar?
Just reinstalled windows 8 on my desktop and started to receive random bsod. I know windows 8.1 is out. I downgraded due to BSOD issues on that version also. Yes I also know my windows 8 is out dated. I understand I should update but that's the least of my concerns right now. I already had 1 ram card fail on me a couple months back. But I didn't recognize this blue screen error.
I was reading this guys post BSOD Critical Process Died even after complete reinstall and his issue is exactly like I am having. My computer would just completely freeze while playing games or watching videos online.
I Just tried to run Memtest86+ and something strange happened. So here's what I did. First I download the Memtest86+ USB Installer. Turned off my computer and put my other 2 rams cards back in (I was testing one at a time). Started up my computer (HP) and press ESC to go into the boot menu and the computer just froze on that screen. It wouldn't do anything. So I turned the computer off and tried another option F10 I think it was. The computer froze again. I repeated this process for all boot options on my PC and each time the computer froze on the startup screen.